Related
I can't seem to get VoLTE working on my RM3.
I'm with Telstra (major Australian mobile carrier) and have confirmed that they have activated VoLTE on my service.
I have ensured 'Enhanced 4G LTE Mode' is turned on in Settings.
Have restarted phone several times, reset network/sim settings etc, etc but VoLTE is still not showing or working.
Is it working for others? Any assistance you can provide please @JerryYin ?
Texan1 said:
I can't seem to get VoLTE working on my RM3.
I'm with Telstra (major Australian mobile carrier) and have confirmed that they have activated VoLTE on my service.
I have ensured 'Enhanced 4G LTE Mode' is turned on in Settings.
Have restarted phone several times, reset network/sim settings etc, etc but VoLTE is still not showing or working.
Is it working for others? Any assistance you can provide please @JerryYin ?
Click to expand...
Click to collapse
It's strange that the VOLTE is not working, it should be supported by deafult. Which firmware you are using?
---------- Post added at 03:26 AM ---------- Previous post was at 03:23 AM ----------
Texan1 said:
I can't seem to get VoLTE working on my RM3.
I'm with Telstra (major Australian mobile carrier) and have confirmed that they have activated VoLTE on my service.
I have ensured 'Enhanced 4G LTE Mode' is turned on in Settings.
Have restarted phone several times, reset network/sim settings etc, etc but VoLTE is still not showing or working.
Is it working for others? Any assistance you can provide please @JerryYin ?
Click to expand...
Click to collapse
And also have you tried to enable VOLTE in service menu?
JerryYin said:
It's strange that the VOLTE is not working, it should be supported by deafult. Which firmware you are using?
And also have you tried to enable VOLTE in service menu?
Click to expand...
Click to collapse
NX629J_ENCommon_V2.09 although when I go in and check for software updates it says my current version is 3.0
Have checked service menu and "VoLTE provisioned" is turned on (is there anything else I need to check in here?)
Thanks.
Edit - I've also tried a sim from a different mobile provider in my RM3 and no VoLTE with that sim/carrier either
Texan1 said:
NX629J_ENCommon_V2.09 although when I go in and check for software updates it says my current version is 3.0
Have checked service menu and "VoLTE provisioned" is turned on (is there anything else I need to check in here?)
Thanks.
Edit - I've also tried a sim from a different mobile provider in my RM3 and no VoLTE with that sim/carrier either
Click to expand...
Click to collapse
If your operator is based on a gsm network, it may not work, I'm using China Telecom and I can get VOLTE working, it is a CDMA operator, however, my another gsm based sim card can not get the VOLTE working on NX629. I'm not sure that the Red Maic 3 can woek on all operator and all get the VOLTE function. Sorry for that.
JerryYin said:
If your operator is based on a gsm network, it may not work, I'm using China Telecom and I can get VOLTE working, it is a CDMA operator, however, my another gsm based sim card can not get the VOLTE working on NX629. I'm not sure that the Red Maic 3 can work on all operator and all get the VOLTE function. Sorry for that.
Click to expand...
Click to collapse
But VoLTE does work in Australia with all of our major mobile networks so that shouldn't be the issue?
Could it be that our two main carriers both use LTE Band 28 for 'best' 4G connection and the RM3 that I was sent does not have that?
EU Version
FDD-LTE: Band 1/2/3/4/5/7/8/12/17/18/19/20/26
TDD-LTE: Band 34/38/39/40/41
TD-SCDMA: Band 34/39
WCDMA(WCDMA): Band 1/2/4/5/8/9/19
CDMA: BC0/BC1 GSM: 850/900/1800/1900 MHz
NA Version
FDD-LTE: Band 1/2/3/4/5/7/8/12/17/18/19/20/25/26/28/30/66
TDD-LTE: Band 34/38/39/40/41
TD-SCDMA: Band 34/39
WCDMA(WCDMA):Band 1/2/4/5/8/9/19
CDMA: BC0/BC1 GSM: 850/900/1800/1900 MHz
Can any other RM3 users please comment on if they have VoLTE working or not?
No Volte on UK's EE network.
On top of that, I can't even use "enhanced LTE" option, if I turn it on I get no caller id (when someone calls me I only get unknown caller instead of the name or number of the person).
In india Global version VOLTE is working perfectly for both sims on global Rom as well as Chinese ROM. You dont ses VOLTE but HD icon next to signal bar in CN rom. On vlobal rom when you are calling someone you see HD.
praveenparvani said:
In india Global version VOLTE is working perfectly for both sims on global Rom as well as Chinese ROM. You dont ses VOLTE but HD icon next to signal bar in CN rom. On vlobal rom when you are calling someone you see HD.
Click to expand...
Click to collapse
Interesting. Thanks for the info.
Firstly, my sim settings look different to yours, not sure why Nubia has made this setting different in roms for the same phone?
Secondly, I managed to have VoLTE work today with a different mobile carrier sim - I tested and 4G was remaining on during calls! But no VoLTE or HD symbol was evident in the notification bar along the top. @JerryYin can you please confirm if the VoLTE symbol should show on RM3 software? If not, can this be added in a software update please.
check in the calling screen HD should appear.
praveenparvani said:
check in the calling screen HD should appear.
Click to expand...
Click to collapse
Yes it does but I really thought the VoLTE symbol should appear in the notification bar?
On my OnePlus 6T, the VoLTE symbol is permanently displayed in the bar when VoLTE is turned on.
Nubia's way of VOLTE = HD
Nightpwish said:
No Volte on UK's EE network.
On top of that, I can't even use "enhanced LTE" option, if I turn it on I get no caller id (when someone calls me I only get unknown caller instead of the name or number of the person).
Click to expand...
Click to collapse
voLTE does work on EE. If you have enhanced LTE option turned on and make a call I think you'll find that the call is made via 4g. It also has WiFi calling on EE which can be enabled through the phone app.
Like you say though, using voLTE and WiFi calling does render incoming calls as showing unknown numbers. I'm still trying to figure out why it does this, it's obviously something to do with the IMS settings as it's not optimized to work on EE's network.
gazm1990 said:
voLTE does work on EE. If you have enhanced LTE option turned on and make a call I think you'll find that the call is made via 4g. It also has WiFi calling on EE which can be enabled through the phone app.
Like you say though, using voLTE and WiFi calling does render incoming calls as showing unknown numbers. I'm still trying to figure out why it does this, it's obviously something to do with the IMS settings as it's not optimized to work on EE's network.
Click to expand...
Click to collapse
Please let us know if you figure it out.
WiFi calling would be great for me, as cellular signal is poor in my area.
My carrier did support VoLTE, I have been able t offer VoLTE working on my Note10+. But after I switch to Pixel 4 XL it's not an option
JalenHo said:
My carrier did support VoLTE, I have been able t offer VoLTE working on my Note10+. But after I switch to Pixel 4 XL it's not an option
Click to expand...
Click to collapse
i have exactly the same problem in greece,the 4 last mobiles like note 9,op 5t and 7 pro,p30 pro works perfect with cosmote carrier on volte and wificalling mode,but with pixel 4 xl not working.i didn't find solution on the whole network
Google is just ignoring most VoLTE networks by not providing needed configs on their phones.
JalenHo said:
My carrier did support VoLTE, I have been able t offer VoLTE working on my Note10+. But after I switch to Pixel 4 XL it's not an option
Click to expand...
Click to collapse
Carrier should add the profile of Pixel 4 to enable VoLTE. No VoLTE is working in HK for Pixel 4 device unless they do so.
darthroy said:
Carrier should add the profile of Pixel 4 to enable VoLTE. No VoLTE is working in HK for Pixel 4 device unless they do so.
Click to expand...
Click to collapse
I don't think so, VoLTE works on my Galaxy Note3 with flashed rom that supports VoLTE although my network didn't list and have VoLTE for Note3
From what i know strongly carrier dependant. If they did not enable it for the device, i cannot enable it
There was a way to enable VoLTE on my previous Asus Rog phone 2 using root. My carrier didn't support it before but it worked using that hack. Don't know if the same will work on pixel..
https://forum.xda-developers.com/rog-phone-2/how-to/guide-enabling-volte-vowifi-v2-t4028073
I am on google fi. Both my wife 3axl and my 4xl show volte as on but greyed out. So I cant change it. I dont know if that means its actually on or not. And it shows vowifi not available and vidio over lte not avaliable. Does anyone know if I am actually on volte?
mojorisin7178 said:
I am on google fi. Both my wife 3axl and my 4xl show volte as on but greyed out. So I cant change it. I dont know if that means its actually on or not. And it shows vowifi not available and vidio over lte not avaliable. Does anyone know if I am actually on volte?
Click to expand...
Click to collapse
If you are on LTE out of call, you making a call and you stay on LTE, then you have VoLTE.
Ah thank you. I do belive that I am on volte. It does continue to show lte when on a callat least most of the time. sometimes it kicks back to hspa+ but not too much. The weird thing for me is why no vowif. I thougt wifi calling was a given at this point especially with tmo. I have signal spy and I use it to force tmo all the time. Sprint sucks in my area but for some reason the phone wants to default to sprint. I did the tests in a number of sports around my area and sprint gets like average 8 mbps download while tmo gets like 30 or 40mbps download. Thats a big difference. This is my second time on fi. I had it when it first came out with my nexus 6p and it always stayed on tmo. never switched to sprint. so fi changed something.
Has anyone figured out this issue? I am on redpocket with GSMA (ie AT&T). They have told me over and over that volte and WIFI calling is enabled - neither option is available. (same with a note10+, pixel 3 XL).
Thanks!
Guys,
i got a Pixel few Days ago ... i need to change the qualcomm profile, to get Volte work ... but i can´t enable the Diag port to get PDC working ... is there any solution?
is there anyway to enable VoLTE for any network? Those days even Redmi phones have this enabled by default
MultiCulti said:
Guys,
i got a Pixel few Days ago ... i need to change the qualcomm profile, to get Volte work ... but i can´t enable the Diag port to get PDC working ... is there any solution?
Click to expand...
Click to collapse
You can enable Diag with these instructions: https://forum.xda-developers.com/showpost.php?p=81417255&postcount=4
cstark27 said:
You can enable Diag with these instructions: https://forum.xda-developers.com/showpost.php?p=81417255&postcount=4
Click to expand...
Click to collapse
Have you tried the mentioned method?
I have magisk on Canary build and i am not able to find advanced settings to set "preserve avb 2.0/dm-verity" in first steps.
Also I tried to apply the codes at the end of the instructions to enable Diag mode but it is not working
I am on latest Android 11 beta 3
Eiad Ajam said:
Have you tried the mentioned method?
I have magisk on Canary build and i am not able to find advanced settings to set "preserve avb 2.0/dm-verity" in first steps.
Also I tried to apply the codes at the end of the instructions to enable Diag mode but it is not working
I am on latest Android 11 beta 3
Click to expand...
Click to collapse
For the A11 beta's there aren't any userdebug vendor images anyway, so you can't do that step. On A11 Beta 3 I know QPST works with the given ADB commands at the bottom of the quoted post, but I couldn't get QXDM to show anything but it's a pretty old version. I do not know about PDC.
JalenHo said:
My carrier did support VoLTE, I have been able t offer VoLTE working on my Note10+. But after I switch to Pixel 4 XL it's not an option
Click to expand...
Click to collapse
u're from hong kong?
the carriers in hong kong are greedy and they won't open volte to 水貨
well they're ****
I have tried several US variants (NAO_US and USC_US) of LG V40 firmwares but could not find one that has VoLTE and VoWiFi enabled.
How do you guys get VoLTE and VoWiFi to work? The features worked with AT&T firmware but I can't go back to it anymore.
Hi I got VoLTE working but not VoWiFi, I used a 'UA' KDZ version 20f but i cant remember which carrier. I had previously gone to us unlocked and european versions but these didn't work. Sorry it's not more specific.
I have got both VoLTE and VoWiFi to work on Cricket network. Here is a brief summary of the fun and painful journey.
1. Unlock bootloader then install TWRP and Magisk.
2. Hex edit boot_a partition to turn off verity check. (This step was necessary before step #3 so the /OEM directory can be modified)
3. Edit XML and config files under /OEM/OP/OPEN_US with references to VoLTE and VoWiFi
4. Add new entries to /OEM/OP/OPEN_US/CONFIG/vo_config.XML file with MCC and MNC values of Cricket Wireless. LG totally left out Cricket in the XML file. For larger providers, the entries are there but most have VoLTE set to on and VoWiFi disabled.
No idea why LG would make it so difficult to turn on VoLTE and VoWiFi. With the toggles hidden and default set to off, gaining root access was the only solution.
Hey guys, I've got a quick question, how do I figure out which LTE bands are unlocked my phone, would there be a hardware reason why none of the stated bands on the spec list would work, I'm particularly interested in getting band 3 to work
piemanny said:
Hey guys, I've got a quick question, how do I figure out which LTE bands are unlocked my phone, would there be a hardware reason why none of the stated bands on the spec list would work, I'm particularly interested in getting band 3 to work
Click to expand...
Click to collapse
Which version do you have? This link will tell you the LTE bands that are enabled. Click on the model of your variant.
https://www.gsmarena.com/lg_v40_thinq-9300.php
Is band 3 available and active in your area?
One way to confirm it is to download "LTE Discovery" app. It has an LTE log that will show you all the towers your phone have connected to.
Anyone with T-Mobile network (US) do you have VoLTE ?
avetny said:
Anyone with T-Mobile network (US) do you have VoLTE ?
Click to expand...
Click to collapse
Not T mobile but ATT I believe VoLTE is active but HD calling is not for me.
jmikepr said:
Not T mobile but ATT I believe VoLTE is active but HD calling is not for me.
Click to expand...
Click to collapse
Wait, so you on tmobile and don’t have VoLTE ?
avetny said:
Wait, so you on tmobile and don’t have VoLTE ?
Click to expand...
Click to collapse
No I'm on ATT
jmikepr said:
No I'm on ATT
Click to expand...
Click to collapse
ok i just quickly checked several utube videos and i see “global” device have VoLtE icon.
So I guess with global rom it will be fix bro
I have the Chinese variant of the Mi 11 Ultra and by default, I was unable to see the options to enable VoLTE and VoWifi.
If you enter the following codes into the dialer, it should work:
VoLTE *#*#86583#*#*
VoWiFi/WLAN *#*#869434#*#*
These codes disable/enable carrier compatibility check. Then go into Sim Card and enable VoLTE or VoWifi.
Since VoLTE is required for RCS in Google Messages to work, enabling this also allowed for 'Chat Features' to be ready on my phone.
Quick note: I am in Canada on the Virgin Mobile Canada network.
I did this but the icons never came up.
I'm in australia using telstra and got the china version
pafc66 said:
I did this but the icons never came up.
I'm in australia using telstra and got the china version
Click to expand...
Click to collapse
Did you get the pop-up stating "carrier check disabled"?
Go to settings>sim card & mobile networks>select sim 1>you should see the options here.
Hope it works!
dj_aj said:
Did you get the pop-up stating "carrier check disabled"?
Go to settings>sim card & mobile networks>select sim 1>you should see the options here.
Hope it works!
Click to expand...
Click to collapse
Yeah I got it and enabled it but I can't see the volte or HD icon?
Have you rebooted?
Have you made a call to see if you stay on 4G?
I'm using EU ROM now but has VoLTE on my Chinese stock, see attached image
pafc66 said:
I did this but the icons never came up.
I'm in australia using telstra and got the china version
Click to expand...
Click to collapse
Even I face same problem I'm using boost sim ,I've enquares the Carrier but they said they support vote , I'm not able to get volte working in my device
Same issue. Got the Chinese variant of the Mi 11 Ultra, running 12.5.12 EU ROM and I'm on Boost (Australia). I've done all the dialler codes and still no VoLTE icon. Calls drop to 3G.
i've done a deep search regarding VOLTE on Telstra in Australia as I am facing this issue too, and I found out the following result:
This issue happened because Telstra did not share its network settings with a few companies, Xiaomi, Oneplus, and others.
On a different thread on Oneplus section, there is a way to fix it that requires root, so we add Telstra settings manually, but whenever a tiny update shows up, then we'll need to repeat it. a restart won't affect it, just an update because it replaces modified network settings file with original one.
so to summarise it, unless a software update with the new settings come up, then it won't work.
And btw, the VOLTE is working on MIUI first version of 12, and MIUI 11. but after the update, settings lost. and this is not an issue with MI 11 ultra, it is with all xiaomi and oneplus devices and a few others.
Do not waste your time on it, and just cope with what we got and be patient.
hassanaliyeh said:
i've done a deep search regarding VOLTE on Telstra in Australia as I am facing this issue too, and I found out the following result:
This issue happened because Telstra did not share its network settings with a few companies, Xiaomi, Oneplus, and others.
On a different thread on Oneplus section, there is a way to fix it that requires root, so we add Telstra settings manually, but whenever a tiny update shows up, then we'll need to repeat it. a restart won't affect it, just an update because it replaces modified network settings file with original one.
so to summarise it, unless a software update with the new settings come up, then it won't work.
And btw, the VOLTE is working on MIUI first version of 12, and MIUI 11. but after the update, settings lost. and this is not an issue with MI 11 ultra, it is with all xiaomi and oneplus devices and a few others.
Do not waste your time on it, and just cope with what we got and be patient.
Click to expand...
Click to collapse
Thanks for this information, sincerely appreciated. My only concern is Telstra turning off their 3G network by June 2024. Let's hope the issue is solved before then. Fortunately my call quality is completely fine without VoLTE at the moment as reception is good. I'm sure other providers will start turning off 3G too. A very odd issue and I'm really surprised it hasn't been fixed.
Did any one manage to find a solution ?
Any solution yet to make volte and vowifi work on Telstra and boost Australia? Thanks
Hi everyone,
Have a global version of X5 Pro.
Trying to make VoLTE and VoWIFI working on T-Mobile in US but no luck.
No toggles in SIM settings and toggles in Phone Info are grayed out.
Any ideas to activate it?
Same with me, I started another thread or two concerning this issue but I believe it has to do with T-Mobile's VoLTE/Wifi-calling provisioning relative to the Find X5 Pro's firmware?
Of course the phone supports VoLTE and WiFi-Calling, so I'm not sure why at least the latter won't work (or at least have a toggle). If you google 'how to enable WiFi calling', most people tell you to set (or re-set) your E911 address because it's a necessary feature of WiFi calling. Ive done this on the T-Mobile website AND with a support rep on the phone, but still no toggle to enable.
I haven't found anything about this outside of XDA so perhaps it's time to submit a ticket directly to Oppo.
Edit: could anyone from the EU/UK chime in on whether they have the toggle options for VoLTE/WiFi-calling? I think we need to identify whether the problem is based on region/carrier rather than the phone.
Pulled from a recent T-Mobile forum post about the same issue (but on multiple different phones):
"In order to enable WiFi calling from an unlocked phone, there appear to be several components which all need to align perfectly. The the phone must have the physical capability, obviously a WiFi antenna. It also seems to rely on VoLTE provisioned and WiFi calling provisioned abilities.
The former carrier must have unlocked the device and its IMEI for use on another carrier.
The current carrier must have enabled WiFi calling, and also configured an E911 address.
"Exactly! The firmware in the Sprint S8 is not compatible with T-Mobile’s WiFi Calling implementation. XDA might offer some work around through flashing or root, but through normal methods, WiFi Calling on such an old device that actually has carrier specific firmware isn’t going to work with a different carrier for those feature implementations. "
dipleg said:
Edit: could anyone from the EU/UK chime in on whether they have the toggle options for VoLTE/WiFi-calling? I think we need to identify whether the problem is based on region/carrier rather than the phone.
Click to expand...
Click to collapse
Vodafone Germany: Custom Firmware with VF branding, but no SIM- or Netlock
VoLTE has no toggle but is activated by default, VoWiFi has a toggle and works.