Question Adaptive refresh rate not working. - Samsung Galaxy S21 Ultra

There is a FPS counter option in the developer option. After turning it on. The refresh rate doesn't change even in AOD it stays at 120hz. I think this is the problem why our battery is poor. I try factory resetting but still the same. I think the last software update broke it.

veeny101 said:
There is a FPS counter option in the developer option. After turning it on. The refresh rate doesn't change even in AOD it stays at 120hz. I think this is the problem why our battery is poor. I try factory resetting but still the same. I think the last software update broke it.
Click to expand...
Click to collapse
u have exynoss or snapdragon?
for me on exynoss / last update AUAC adaptive work good , set on show refresh rate in developer option show between 120hz and 60hz .

carlitobahsoun said:
u have exynoss or snapdragon?
for me on exynoss / last update AUAC adaptive work good , set on show refresh rate in developer option show between 120hz and 60hz .
Click to expand...
Click to collapse
I have an exynos s21 ultra. Can send pictures on how it changes. Mine stays 120 all the time.

veeny101 said:
I have an exynos s21 ultra. Can send pictures on how it changes. Mine stays 120 all the time.
Click to expand...
Click to collapse
lol , i try to record using screen recording but it keep 60hz while recording.
but trust me it work .

carlitobahsoun said:
lol , i try to record using screen recording but it keep 60hz while recording.
but trust me it work .
Click to expand...
Click to collapse
Mines stays on 120 only. I did 2 hard reset already.

veeny101 said:
I have an exynos s21 ultra. Can send pictures on how it changes. Mine stays 120 all the time.
Click to expand...
Click to collapse
Try clearing the system cache, a hard reboot, safe mode to rule out 3rd party apks (safe mode may disable adaptive refresh)
Try temporarily turning off Developer options.
Double check all settings, Samsung loves to hid them.
If you have Samsung Device Care clear it's data.

are u enable enhanced processing???
its the high performance .
maybe coz of that

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mine work , no prob at all

carlitobahsoun said:
are u enable enhanced processing???
its the high performance .
maybe coz of that
Click to expand...
Click to collapse
I'm on fresh hard reset haven't touch anything on setting except the fps counter.

plz check thiz if enabled

carlitobahsoun said:
plz check thiz if enabled
Click to expand...
Click to collapse
It's off. Can you please upload a screen record of the fps changing so I can show it to the Samsung store that I bought my phone.

u have mega to upload for u? or Dropbox??

pm sent with mega link

Have the same problem sometimes... The adaptive refreshrate needs some fixes... It also stays on 120 or goes down to 60 when looking pictures... It should go as low as 10hz then...

Having exactly the same issue here, stuck on 120 even with AOD. Exynos

Are you on low brightness ? Is adaptive brightness turned on?

My exynos s21 Ultra does go down to 48hz but never reaches 10hz. Also I'm also spotting when in lowish light, when reading the drop from 120 to 60/48 causes the screen colour to slightly change

That's interesting! I was on the lowest brightness and it says at 120 all the time, if I move the brightness a little higher, the refresh is 60 or 120, more importantly AOD is now 60.
When move back to lowest brightness, stuck again at 120, for AOD as well. Wonder if that has been killing my battery. I thought the refresh should go down to 10?

Not sure if this may answer at least some aspects of the queries in this thread:
Investigating The Galaxy S21 Ultra New OLED Emitter: Huge Efficiency Improvements
www.anandtech.com
"If you’re using your phone in dark or even dim conditions, the variable refresh rate doesn’t work at all, and the 120Hz mode comes at a huge 300mW cost in baseline power..."
"...I wish Samsung instead of disabling the VRR/LFD under dim conditions would simply switch to 60Hz mode as that would be a much more power efficient alternative. Of course, the best solution would be simply to get rid of this ambient brightness limitation and allow 120Hz and VRR in all conditions – it’s still not exactly clear at to the technical reason why Samsung is employing this limitation in the first place..."

Related

[XAP] Tweak 'n' Toggle 2.0 Updated 03-11-2013 [XAP]

Tweak 'n' Toggle for windows Phone ®.by SilverDragon24 (a.k.a IonT)
This app lets use toggle some settings on wp7 that the O.S does not allow natively
Compatibilty:
Windows Phone ® 7.1
Windows Phone ® 7.5
Windows Phone ® 7.8
Features:
Enable or Disable the little sound played when you plug in the charger also called the Charging Chime.
On WP7.8 you may have noticed that the volume keeps resetting to 19 on reboot. This app lets you enable or disable that feature.
Enable or Disable instant resume (thanks to JaxBot's Dehydration Hack).
Enable or Disable Software shutter button in camera.
Set Max Volume Segemetation while In Call.
Set Max Volume segmentation for the Entire UI
Set Low, Medium and High Brightness Percentages. (Change Brightness from Brightness settings to see effect).
This app wouldn't have been possible for me without the DllImport Project (thanks fiinix) and WP7 Root Tools (thanks Heathcliff74).
This app will work on any Interop unlocked device (at least works perfect with my Lumia 710) with WP7 Root Tools and Full Unlocked Devices.
Download XAP file from Atttachmnet or here or here
Please reply with your feedback. Don't forget to click thanks if this helped you
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wow, thanks great idea.
Greetz,
WP 7.8 Dynamics / HTC HD7:
View attachment 1794645
Except this error on opening it seems to work.
Also please set InitVol to not more than 60 at HKCU\ControlPanel\Sounds\BatteryCharging. 100 is too loud for such notification.
maya79 said:
WP 7.8 Dynamics / HTC HD7:
View attachment 1794645
Except this error on opening it seems to work.
Also please set InitVol to not more than 60 at HKCU\ControlPanel\Sounds\BatteryCharging. 100 is too loud for such notification.
Click to expand...
Click to collapse
Think I uplded the pre-release xap by mistake.... i'll update the post and attachments....
SilverDragon24 said:
Think I uplded the pre-release xap by mistake.... i'll update the post and attachments....
Click to expand...
Click to collapse
Updated the post with the new XAP. Now I gotta update it in the bazaar.... did the same there.... Sorry folks...
2.0 will inlcude user control on the charging chime volume....... Right now gotta be on my Hack OS X for a few days so can't update.
I mixed Up between Pre-Release and Release XAPs real bad but I sorted it out but the one at the Bazaar got worse so I'll have to sort that out...... Updated the app to 2.0..... Tweak 'n' Toggle 2.0 Includes user control over charging chime volume... enjoy guys.... I've updated the 1st post with links to TnT 2.0
and can anyone please tell me how to update the title of my thread?
nvm, did it...
I really like this tool because of the brightness functionality. It works great on my Nokia Lumia 710.
What do you alter to change the brightness? Is it a regkey? If so, what regkey? I searched high and low to find such a setting but I was unable to.
Could you please provide me this information?
Also I have my minimal brightness on 2% however when the "timeout brightness" kicks in it is higher then 2%.
So after a minute of inactivity the brightness of my screen lits up. Also when wake the phone from sleep, the screen lits up for a second and goes back to the 2% brightness.
Is it possible to add the "timeout brightness" to the tool? Also if it's possible what do you change in the system? Regkeys? If so which ones?
Thanks in advance and I hope you keep the tool updated.
I didn't think about the timeout brightness as i alway keep my phone on never timeout.... i'll look into dat... looks like 3.0 coming soon..... as for the brightness reg keys here they are
Low Brightness
HKCU\ControlPanel\Brightness\LowBrightness
Medium Brightness
HKCU\ControlPanel\Brightness\MediumBrightness
High Brightness
HKCU\ControlPanel\Brightness\HighBrightness
SilverDragon24 said:
I didn't think about the timeout brightness as i alway keep my phone on never timeout.... i'll look into dat... looks like 3.0 coming soon..... as for the brightness reg keys here they are
Low Brightness
HKCU\ControlPanel\Brightness\LowBrightness
Medium Brightness
HKCU\ControlPanel\Brightness\MediumBrightness
High Brightness
HKCU\ControlPanel\Brightness\HighBrightness
Click to expand...
Click to collapse
Aah super, you're my hero! I'm looking forward to 3.0 curious how you fix the time-out brightness as there isn't a regkey value for it...
Any idea what the regkey BrightnessChanged does? The value is 0.
if there is no regkey for it, it maybe possible with native code, which means i'm going to have to get deeper understanding of the os...
brightnesschanged stores current brighness setting
0= Low
1= Medium
2= High
3= Auto
Brightness error
Hi, thanks for your work.
LGE900 7.8+root tools
I have this message on app start-up
View attachment 2270401 View attachment 2270402
And aftet an initial perfect working, the brightness setting doesn't work anymore. Now Low and medium setting are the same brightness (the medium default) regardless the value i choose. The auto brightness still work well.
Any suggestion to restore the functionality?
just change the brightness settings to different values and it'll b back
Sent from my Galaxy Nexus using xda premium

[MOD] [APP] Vsharp 11/16/15

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This application will allow you to adjust your displays sharpness value on the fly. Default is set at 4 but has an adjustment value of 0 to 99. Choose your amount of sharpness with this app.
Vsharp is built on Tasker for the device and on the device. Tasker is not needed to run this application. This app is currently in BETA. More features and adjustments will be added in the future. If you have an issue let me know.
CURRENT ISSUES.
Don't open the app after a reboot till it notifies you it's value is restored after a reboot. Again this is BETA and is work being done on getting it resolved.
REQUIREMENTS!
Must be rooted.
Must have busybox.
Must have SeLinux set to permissive.
HOW DOES Vsharp work?
It adjusts /sys/class/panel/img_tune/sharpness
DOWNLOAD
Version 1 BETA
https://www.androidfilehost.com/?fid=24269982086998092
Any issues or questions let me know!
TASKER SOURCE CODE
DOWNLOAD
https://www.androidfilehost.com/?fid=24269982086998106
Future2
Nice razz. Be interesting. Do have one question. You say built on tasker. Do we need tasker installed? Its not on the list but you put a link in 2nd op so I just wanted to double check.
Thanks again
Sent from my non-Mega loved v10 H901.
Zugshad said:
Nice razz. Be interesting. Do have one question. You say built on tasker. Do we need tasker installed? Its not on the list but you put a link in 2nd op so I just wanted to double check.
Thanks again
Sent from my non-Mega loved v10 H901.
Click to expand...
Click to collapse
No. You don't need Tasker to use Vsharp. Vsharp is a stand alone application built on tasker using the Tasker app factory.
I just posted the source in the second post to show the work if someone wanted to look at it or modify to their liking
Actually my biggest complaint about the display isn't actually the stock sharpness setting of 4, but the gamma. The gamma on my V10 is off a considerable amount and I'm losing detail in dark scenes. It's definitely not around the more standard gamma value of 2.2
I hoping to tune that up in the future also with this app.
Anyone has this confirmed to be working? ^.^
Will love to add it to the Index with confirmation
mgbotoe said:
Anyone has this confirmed to be working? ^.^
Will love to add it to the Index with confirmation
Click to expand...
Click to collapse
Confirmed.
Sent from my LG-H901 using Tapatalk
Isn't Tasker awesome?! Gonna try this out.
Update: Well it definitely appears to be doing something but I have no idea what I'm doing. Off to read some articles about sharpness before the Super Bowl, I suppose. Go Panthers!
A little confused on what exactly this does? Is this to fix that grainy look when taking pics or something?
baySF said:
A little confused on what exactly this does? Is this to fix that grainy look when taking pics or something?
Click to expand...
Click to collapse
It's just like setting the sharpness on your tv. It should not have any effect on taking a picture. If you see some grain effect in a pic its completely unrelated to this mod. What your experiencing is noise in a dark scene which is typical of a small, high pixel count camera sensor.
When taking a picture, try to use the lowest ISO setting possible. In a dark scene the ISO will need to be greater for a properly exposed pic. This is when you will experience the most noise.
razz1 said:
It's just like setting the sharpness on your tv. It should not have any effect on taking a picture. If you see some grain effect in a pic its completely unrelated to this mod. What your experiencing is noise in a dark scene which is typical of a small, high pixel count camera sensor.
When taking a picture, try to use the lowest ISO setting possible. In a dark scene the ISO will need to be greater for a properly exposed pic. This is when you will experience the most noise.
Click to expand...
Click to collapse
okay thanks for clearing this up. Yeah I can definitely see the noise when using snapchat and it's annoying. Thought this mod was related to the noise and was gonna try it out. Thanks though!
I thought there is no working root on LG V10 yet?
Gesendet von meinem LG V10
Anyone have a set of values to go of as a start?
Sent from my LG-H900 using Tapatalk
greekunit690 said:
Anyone have a set of values to go of as a start?
Sent from my LG-H900 using Tapatalk
Click to expand...
Click to collapse
I personally set it to 0 as there really isn't any need for sharpening. It just introduces noise in the display.
SWEET! Thanks for this! I was really bummed that the screen on the amazing V10 was not as sharp as my G3. Now its just as sharp. (doesn't seem to affect the second screen, but don't care)
I set it to value 30...anything more and it doesn't seem to do anything. Also, setting to max, 99, upon reboot is goes back to 0.
EDIT: So.....maybe an issue. The sharpening effect dies when i launch some apps, like Gallery. I then go back into the VSharp app and its reads the value and its back to 4..like it was overridden by the system.
Edit: Removed Gallery, Switched to Google Photos app. Doesn't instant kill sharp effect when that app is used.
Sharpness not sticking after screen off.
I definitely am noticing that any sharpness value is not sticking/being re-applied when the screen shuts off/locked or goes to sleep.
I go back into the app, and it reads the current value and it says what i set it to (30), but when i toggle it up or down, I can instantly see the example bars sharpen up, which proves it was off then was re-applied when I toggled the value.
I tried setting the app to ignore battery optimizations in system settings, thinking maybe the OS is killing the app in the background, but that has no effect. I also tried disabling the lock screen entirely, no change.
Any ideas? I do have other things like Xposed, App settings (530 dpi set on certain apps), Gravity Box, and G4 TweakBox installed....but none of them have any display mods enabled.
Any way to make a widget or something i can one-press to toggle the value and re-apply....vs having to use the app every time I want the screen sharp after it goes off.
Edit: Is this app supposed to may a dozen and more "Subsystem/img_tune/" directories in /sys/class/panel/...all inside of each other.
Is there a way to just change the sharpness file and lock it to read only o that it can be overridden...I have tried setting permissions using root explorer to read only...but it still get overwritten at reboot..and eventually by system.
Do i need to set selinux every time i reboot and app runs?

Question Changing refresh rate to 90hz

I've read about a guide to set the refresh rate to 90hz for the poco x3 nfc and the poco x3 pro, through an app called setedit. Did someone tried to change the refresh rate for the redmi with this trick?
I tried it, it doesn't work !
yes I have the 90hz active with my redmi note 10 pro with this app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My phone is set to 90 without any problem.
frank1980 said:
yes I have the 90hz active with my redmi note 10 pro with this app
Click to expand...
Click to collapse
Which miui version are you using? You noticed differences (possibly gains) in battery consumption?
Thanks I managed to get this working too on miui 12.5.1
For anyone that's interested download "setedit", navigate to system tables tab, scroll to "user_refresh_rate" and change value to 60, 90, or 120.
Don't set values outside those or it may crash the phone.
victus42 said:
Which miui version are you using? You noticed differences (possibly gains) in battery consumption?
Click to expand...
Click to collapse
brother I'm using official 12.5.4.0 and yes some battery gain is better
stonesushi said:
Thanks I managed to get this working too on miui 12.5.1
For anyone that's interested download "setedit", navigate to system tables tab, scroll to "user_refresh_rate" and change value to 60, 90, or 120.
Don't set values outside those or it may crash the phone.
Click to expand...
Click to collapse
exactly modifying other values is a risk
frank1980 said:
exactly modifying other values is a risk
Click to expand...
Click to collapse
What exactly app you are using?I try SETEDIT on Play Store but it didn't work.
SetEdit (Settings database editor)
stonesushi said:
Thanks I managed to get this working too on miui 12.5.1
For anyone that's interested download "setedit", navigate to system tables tab, scroll to "user_refresh_rate" and change value to 60, 90, or 120.
Don't set values outside those or it may crash the phone.
Click to expand...
Click to collapse
I tried but it doesn't work for me. The settings say 90 hz, but the developers options counter says 60 and even an app from the play store says 60. What steps did you follow precisely? Did you reboot at the end?
stonesushi said:
Thanks I managed to get this working too on miui 12.5.1
For anyone that's interested download "setedit", navigate to system tables tab, scroll to "user_refresh_rate" and change value to 60, 90, or 120.
Don't set values outside those or it may crash the phone.
Click to expand...
Click to collapse
I am wondering if the panel itself doesn't support 90 hz, how could an app make it work.
BTW I tried with setedit app, but there is nothing like "user_refresh_rate" option. On 12.5.4 version.
Cheers!
badday0401 said:
What exactly app you are using?I try SETEDIT on Play Store but it didn't work.
Click to expand...
Click to collapse
there is the version brother
It shows 90 Hz but actually running at 60Hz.Very weird.Maybe it depends on different panel displays.
badday0401 said:
View attachment 5362411
It shows 90 Hz but actually running at 60Hz.Very weird.Maybe it depends on different panel displays.
Click to expand...
Click to collapse
I am in the same situation, I don't know why
victus42 said:
I am in the same situation, I don't know why
Click to expand...
Click to collapse
Because the panel doesn't support 90 hz as simple as that. This is the reason why ROM devs can't add 90 hz for this device.
Enjoy either 60 or 120 hz. All trials and efforts for 90 hz are waste. That's it.
Cheers!
frank1980 said:
brother I'm using official 12.5.4.0 and yes some battery gai
Click to expand...
Click to collapse
victus42 said:
Which miui version are you using? You noticed differences (possibly gains) in battery consumption?
Click to expand...
Click to collapse
Didnt you got 12.5.8? 120 hz not working on youtube...

Question Android 12/ OneUI 4 Scrolling

has anyone noticed how the screen doesn't stay at 120hz long enough while scrolling? When your finger is on the screen, it stays at 120hz however, as soon as you lift your finger from the screen, it reverses back to 60hz and the scroll gets jittery. it's very annoying and am contemplating going back to android 11 just for this. 60hz on a 60hz panel isn't bad, but forcing 60hz on a 120hz native panel, the stutter is quite annoying. Does anyone know of a fix?
To force 120 Hz mode use this adb command
Code:
adb shell settings put secure refresh_rate_mode 2
Peter 22 November 2021
Samsung Android
The Samsung Galaxy S21, S21+ and S21 Ultra units in the US received the stable version of One UI 4 last week, even the carrier phones. However, one bug managed to sneak through the beta tests and is currently affecting users.
The issue is with the 120 Hz mode, specifically that the screen drops down to 60 Hz as soon as the user lifts their finger rather than, say, when the scrolling animation is done.
Samsung is aware of the issue and is working on a fix. It seems that this issue was actually caught in the beta tests, but the fix that is present in the current version of the software (BUK7) only works on some units. A more complete fix should arrive with the next update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Initial reports indicated that this issue affected only US users, but Galaxy S21 owners from other regions have also complained of the same problem.
Samsung is working on a fix for the 120Hz bug on Galaxy S21 units after the One UI 4 update
The bug prevents the phones from using their 120Hz screens to their full potential. Samsung is aware of the issue. The Samsung Galaxy S21, S21+ and S21...
www.gsmarena.com
Use Galaxy Max HZ to temporary fix the issue. Set it to high 120 hz
I am still having problems with the refresh rate
Haven't checked my refresh rate but I can't click anything at the top quarter inch or so home screen. Can't hit any buttons or anything up there I have to rotate it sideways then I can hit those actions
Sky33 said:
Use Galaxy Max HZ to temporary fix the issue. Set it to high 120 hz
Click to expand...
Click to collapse
Is it in the playstore or the Galaxy Store? Don't see it.
SiNJiN76 said:
Is it in the playstore or the Galaxy Store? Don't see it.
Click to expand...
Click to collapse
Its on XDA. You can try Google Galaxy Max Hz XDA, and it should comes up. You'll need to grant the ADB access though to get the 120hz fix working

Question Oneui 4.0 powersaver 120HZ?

Hey guys, dont know if we have an thread about this but someone knows how to enable powersaver at 120hz? Used it on Android 11 and battery life was amazing. Now everytime i enable powersaver via adb it gets back to 60hz :/
Goku1992 said:
Hey guys, dont know if we have an thread about this but someone knows how to enable powersaver at 120hz? Used it on Android 11 and battery life was amazing. Now everytime i enable powersaver via adb it gets back to 60hz :/
Click to expand...
Click to collapse
Meh? Don't you normally do that in Device Care?
Dependencies, dependencies, dependencies... be careful what you kill.
blackhawk said:
Meh? Don't you normally do that in Device Care?
Dependencies, dependencies, dependencies... be careful what you kill.
Click to expand...
Click to collapse
Yes you can do that in devicr care... But when you enable 120 hz and enable it in device care 120 would be off. On Android 11 you can enabke it via adb and 120hz (adaptive) remains with powersaver on... But on a12 this iant possible. Also cant enable 120hz via adb when powersaver is on... So im looking for a workaround
Goku1992 said:
Yes you can do that in devicr care... But when you enable 120 hz and enable it in device care 120 would be off. On Android 11 you can enabke it via adb and 120hz (adaptive) remains with powersaver on... But on a12 this iant possible. Also cant enable 120hz via adb when powersaver is on... So im looking for a workaround
Click to expand...
Click to collapse
I thought it uses variable refresh rate. So you want it running continuously at 120hz?
Just curious if there's a reason for this.
I have skirted this technology for the time being but it's interesting.
blackhawk said:
I thought it uses variable refresh rate. So you want it running continuously at 120hz?
Just curious if there's a reason for this.
I have skirted this technology for the time being but it's interesting.
Click to expand...
Click to collapse
No you can enable adaptive refresh rate via adb. Also lowest refresh rate. But it wont work under Android 12
Goku1992 said:
No you can enable adaptive refresh rate via adb. Also lowest refresh rate. But it wont work under Android 12
Click to expand...
Click to collapse
I'm confused what you want. My point was variable refresh rate is control by Device Care I believe. You trying to override variable refresh rate for a forced 120hz rate?
Are you saying that the 120hz rate is completely unavailable in Android 12 or just adaptive power saving ie variable refresh rate?
Roll back to 11 if you can... personally I'm not venturing beyond Q on my N10+'s with one still running well on 9.
This works for me: https://forum.xda-developers.com/t/...ith-power-saving.4362843/page-2#post-85987873
Android 12. This app works perfectly for powersave and adaptive.
blackhawk said:
I'm confused what you want. My point was variable refresh rate is control by Device Care I believe. You trying to override variable refresh rate for a forced 120hz rate?
Are you saying that the 120hz rate is completely unavailable in Android 12 or just adaptive power saving ie variable refresh rate?
Roll back to 11 if you can... personally I'm not venturing beyond Q on my N10+'s with one still running well on 9.
Click to expand...
Click to collapse
Mate i want adaptive 120hz and powersaver on and i want to stay on Android 12...
DS1000RR said:
This works for me: https://forum.xda-developers.com/t/...ith-power-saving.4362843/page-2#post-85987873
Android 12. This app works perfectly for powersave and adaptive.
Click to expand...
Click to collapse
Thanks mate i will try
DS1000RR said:
This works for me: https://forum.xda-developers.com/t/...ith-power-saving.4362843/page-2#post-85987873
Android 12. This app works perfectly for powersave and adaptive.
Click to expand...
Click to collapse
Tried it with adb, sadly it wont work for me :/
I just created an account just to ask this very question. For me, battery life was not satisfactory until i discovered the "exploit" that Goku1992 mentions here: using 120hz refresh rate together with Power saving mode. Before i found this I only used the phone in 60hz to get good battery life, which sort of took away one of the main reasons to buy it in the first place. Now I'm reluctant to install One Ui 4 if it means this is no longer possible...
What I found with it is that it doesn't work instantly. I have to leave it half an hour and then it begins to work.
DS1000RR said:
What I found with it is that it doesn't work instantly. I have to leave it half an hour and then it begins to work.
Click to expand...
Click to collapse
Okay thats strange :s
Oxy123 said:
I just created an account just to ask this very question. For me, battery life was not satisfactory until i discovered the "exploit" that Goku1992 mentions here: using 120hz refresh rate together with Power saving mode. Before i found this I only used the phone in 60hz to get good battery life, which sort of took away one of the main reasons to buy it in the first place. Now I'm reluctant to install One Ui 4 if it means this is no longer possible...
Click to expand...
Click to collapse
This is what i mean also i dont need the apps to notify me every second. Its okay with powersave
DS1000RR said:
What I found with it is that it doesn't work instantly. I have to leave it half an hour and then it begins to work.
Click to expand...
Click to collapse
That's odd... is power management active*?
Try clearing the system cache.
*this should be on a separate page from the display/cpu power settings. In older versions they appear like this, toggling any of these on tends to go badly... except fast charging.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've been testing an app called Buoy on the playstore. Don't turn on the phones power saver but use the extreme profile in the app. I use 96hz though and I'm yet to test it with 120hz. I am very impressed so far and this is day one. Mind you it's a payed app. About a dollar if I recall. I was only getting about 6 hours before but I'm expecting close to 8 with the app. Standby power usage has also been lowered.
On Android 12 One ui 4.0 at 48%
Final results

Categories

Resources