Related
For all those who want to install a stable miui 8. here it is . this rom is from an chinese website, at the start it had a lot of bloatware so i had modified the rom and removed all of the bloatware and tried to englishize it. this rom boots up without any problem and does not consume a lot of ram, so feel free to install this rom ! .
Installation Instructions-
! TWRP recovery is recommended !
! Your phone should be charged to 100% !
Download and copy the rom file to SD Card.
Boot into the recovery and take a thorough backup of your current rom incase if anything goes wrong.
After its completed, Wipe cache, dalvik,system and data.
After that, Flash the ROM file which is located in your SD Card .
After its completed, reboot to system.
The first boot may take time so be patient.
Gapps installation [optional but recommended]
The rom contains google installer app so no need of gapps package.
Open google installer app and press the green button and it will check for all the not installed google apps and it will download all of the gapps required and it shows a screen of installation of apps where you have to press on install and wait for some time and repeat this step for installation of other google apps.
After this , it will show some force closes of google play services, so to solve this, go to settings>installed apps>downloaded apps>click on google play services and scroll down until you find Permissions manager and click on it and allow all of the permissions required for it, repeat this step for all of the other google apps until you notice any google apps is not force closing.
After all of these are done, Voila! you can use this rom !
Change logs-
Working RIL (Calls and data)
Removed some chinese apps for better performance.
Added google installer for simple installation of the gapps.
Tried to englishize the rom.
Downloads- ALL MIUI8 BUILDS HERE
If you like my works, then Buy Me A Coffee: http://buymeacoff.ee/IHR197v
sorry for my english if you didn't understood it properly
XDA:DevDB Information
MIUI 8 for galaxy S3, ROM for the Samsung Galaxy S III I9300
Contributors
sonic_sakthivel123
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Rooted, custom recovery installed like TWRP
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 7.3.17
Stable Release Date: 2018-05-13
Created 2018-05-16
Last Updated 2019-05-21
Hello guys! i have updated the rom to V3 and added some tweaks
sonic_sakthivel123 said:
For all those who want to install a stable miui 8. here it is . this rom is from an chinese website, at the start it had a lot of bloatware so i had modified the rom and removed all of the bloatware and tried to englishize it. this rom boots up without any problem and does not consume a lot of ram, so feel free to install this rom ! .
Installation Instructions-
! TWRP recovery is recommended !
! Your phone should be charged to 100% !
Download and copy the rom file to SD Card.
Boot into the recovery and take a thorough backup of your current rom incase if anything goes wrong.
After its completed, Wipe cache, dalvik,system and data.
After that, Flash the ROM file which is located in your SD Card .
After its completed, reboot to system.
The first boot may take time so be patient.
Gapps installation [optional but recommended]
The rom contains google installer app so no need of gapps package.
Open google installer app and press the green button and it will check for all the not installed google apps and it will download all of the gapps required and it shows a screen of installation of apps where you have to press on install and wait for some time and repeat this step for installation of other google apps.
After this , it will show some force closes of google play services, so to solve this, go to settings>installed apps>downloaded apps>click on google play services and scroll down until you find Permissions manager and click on it and allow all of the permissions required for it, repeat this step for all of the other google apps until you notice any google apps is not force closing.
After all of these are done, Voila! you can use this rom !
Change logs-
Working RIL (Calls and data)
Removed some chinese apps for better performance.
Added google installer for simple installation of the gapps.
Tried to englishize the rom.
Downloads- https://drive.google.com/open?id=1s2JGE8xZ3qOFVtFlmV9DlpqcVL6Q1Ce6
copy and paste this link in your browser and download the rom.
sorry for my english if you didn't understood it properly
XDA:DevDB Information
MIUI 8 for galaxy S3, ROM for the Samsung Galaxy S III I9300
Contributors
sonic_sakthivel123
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: Rooted, custom recovery installed like TWRP
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 7.3.17
Stable Release Date: 2018-05-13
Created 2018-05-16
Last Updated 2018-05-16
Click to expand...
Click to collapse
Hello guys! i have updated the rom to V3 and added some tweaks!
Change log V3-
added some tweaks
fixed mi music player not able to read music contents off the sd card or internal storage.
added htc keyboard and music player (you can uninstall htc music player if not needed).
Bugs and workarounds-
Mi camera force closes when switching to front camera.
when going to settings>about phone>system update, the settings force closes.
flashing procedure-
same as the earlier version of this rom.
Uploading the rom link soon! so please wait
Here you go guys the link for V3
Here you go guys the link for V3-
download- GT-I9300_MIUI 8_CLEAN_V3
Enjoy guys:good:
How about battery or SOT brother...Screenshoot if you have..
Nurrafik1973 said:
How about battery or SOT brother...Screenshoot if you have..
Click to expand...
Click to collapse
i have not not calculated it, but its decent. my phone's battery is bloated so the SOT might differ.
Nurrafik1973 said:
How about battery or SOT brother...Screenshoot if you have..
Click to expand...
Click to collapse
screenshots are in screenshot tab
Its good to see a Stable Miui, launcher use to crash in all the earlier miui rom..Can u please confirm if Whatsapp video call is working??
whatsapp video call is not working.
avishek83 said:
Its good to see a Stable Miui, launcher use to crash in all the earlier miui rom..Can u please confirm if Whatsapp video call is working??
Click to expand...
Click to collapse
No the whatsapp video call is not working for now but i'm trying to fix it but I'm consistently failing in it .
sonic_sakthivel123 said:
No the whatsapp video call is not working for now but i'm trying to fix it but I'm consistently failing in it .
Click to expand...
Click to collapse
Expected so...cos cyanogen based all 6.0 MM roms has broken hwc ...which was fixed in recent versions of lineage os N roms...if only u can make a miui build on lineage 15.1..it will work
do you mean lineage 14.1 ?
avishek83 said:
Expected so...cos cyanogen based all 6.0 MM roms has broken hwc ...which was fixed in recent versions of lineage os N roms...if only u can make a miui build on lineage 15.1..it will work
Click to expand...
Click to collapse
do you mean lineage 14.1 ?, because lineage 15.1 is not developed currently for our galaxy s3:crying:
So if anyone can help me building miui 9 for our device which is based on lineage 14.1 could be helpful and i have made an test build of miui 9 based on marshmallow but unfortunately the launcher force closes and because of that the whole ui becomes unresponsive:crying:. so if anyone is there to help me out to build miui 9 for our beloved device would be grateful.
avishek83 said:
Expected so...cos cyanogen based all 6.0 MM roms has broken hwc ...which was fixed in recent versions of lineage os N roms...if only u can make a miui build on lineage 15.1..it will work
Click to expand...
Click to collapse
hwc has nothing to do with WhatsApp calling. WhatsApp calling has been fixed on both CM13 and LOS14/14.1
Launcher crashes all the time, i can go into settings, but there is no "google services" to chose from.
Been rebooting, wiping cache, dalvik, etc, tried a lot of different stuff. I selected Swedish language, could that **** stuff up?
Edit: i was not 100% charged, but would that really make a difference?
erik1984 said:
Launcher crashes all the time, i can go into settings, but there is no "google services" to chose from.
Been rebooting, wiping cache, dalvik, etc, tried a lot of different stuff. I selected Swedish language, could that **** stuff up?
Edit: i was not 100% charged, but would that really make a difference?
Click to expand...
Click to collapse
maybe, did you performed a full wipe before installing the rom ?
because if you dirty flash the rom it could get unstable and you have to install the google apps manually using the google installer app present in the rom, procedures are given in the op
sonic_sakthivel123 said:
do you mean lineage 14.1 ?, because lineage 15.1 is not developed currently for our galaxy s3:crying:
So if anyone can help me building miui 9 for our device which is based on lineage 14.1 could be helpful and i have made an test build of miui 9 based on marshmallow but unfortunately the launcher force closes and because of that the whole ui becomes unresponsive:crying:. so if anyone is there to help me out to build miui 9 for our beloved device would be grateful.
Click to expand...
Click to collapse
It was. Lineage 15 has already in development . but dev gone
unknown said:
It was. Lineage 15 has already in development . but dev gone
Click to expand...
Click to collapse
can you provide me the link for that development page ? please
sonic_sakthivel123 said:
can you provide me the link for that development page ? please
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...14-1-i9300-t3544531/post76226256#post76226256
unknown said:
https://forum.xda-developers.com/ga...14-1-i9300-t3544531/post76226256#post76226256
Click to expand...
Click to collapse
there is no download link for it :crying: ?
sonic_sakthivel123 said:
there is no download link for it :crying: ?
Click to expand...
Click to collapse
Of course . Just tested lol :cyclops::cyclops:
sonic_sakthivel123 said:
maybe, did you performed a full wipe before installing the rom ?
because if you dirty flash the rom it could get unstable and you have to install the google apps manually using the google installer app present in the rom, procedures are given in the op
Click to expand...
Click to collapse
Hmm, yeah i did! Seems to be a language issue, try changing to Swedish and it starts crashing, other languages seems to work ok.
hi guys, anyone needs miui 9 theme for this rom?
hi guys, anyone needs miui 9 theme for this rom?
here it is - MIUI 9 theme
installation procedure-
see the video- https://www.youtube.com/watch?v=vG96PDUReus
for detailed installation procedure
[ROM]Stock 7ESL3 G93xF OREO SER
Description:
1. On the basis of the stock
2. Neither the version of the bootloader or modem is not changing
3. Removed a warning about high volume
4. Rooted Magisk/ update after installation/
5. Turning off the camera shutter
6. Record button in the dialer
7. Removed unnecessary applications
8. Raised the volume on the headphones
9. Removed delay after call / In lite version/
10. Quick Face Unlock Without Swipe (for Google Smart Lock)
11. Fixed a startup's Health
12. Removed a warning about high volume
13. Working private mode
14. The status of the official
15. Service codes work
16. Removed all KNOX
17. AppLock
18. Odex
19.Button recovery
Installation:
1. Be sure that you're on TWRP
2. Download the ROM from the links..
3. Wipe System, Data, Dalvik, Cache.
4. Flash the ROM
5. Reboot and Enjoy.
Download firmware
Mod edit:
All download links removed and thread closed due to missing kernel source.
Credits :
morogoku
XDA:DevDB Information
7ESL3, ROM for the Samsung Galaxy S7 Edge
Contributors
vovadvnovlineru
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Testing
Created 2019-05-24
Last Updated 2020-01-11
[ROM]7ESK7 G93xF RC&Infinite S9
Поддержка 7 EDGE /FLAT
Description:
1. On the basis of the stock G93xFXXS7ESK7
2. Neither the version of the bootloader or modem is not changing
3. Removed a warning about high volume
4. Rooted Magisk/ update after installation/
5. Turning off the camera shutter
6. Record button in the dialer
7. Removed unnecessary applications
8. Raised the volume on the headphones
9. Removed delay after call / In lite version/
10. Quick Face Unlock Without Swipe (for Google Smart Lock)
11. Fixed a startup's Health
12. Removed a warning about high volume
13. Working private mode
14. The status of the official
15. Service codes work
16. Removed all KNOX
17. AppLock
18. Odex
Wallpapers Infinite
RomControl
Download firmware
https://yadi.sk/d/oMG-y-JNOBqbbQ
Mods
https://yadi.sk/d/AeUIaIe_3JAc9Q
.....
What's different about this rom to others?
bodomfan said:
What's different about this rom to others?
Click to expand...
Click to collapse
Nothing
PopDavid said:
Nothing
Click to expand...
Click to collapse
So it's pointless then
bodomfan said:
So it's pointless then
Click to expand...
Click to collapse
lol respect his work then
Lol,could be an amazing rom ,never know
can u remove magisk on installation? my device won't start up because of it.. just keeps boot looping. really want to try this rom.
thank you bro. i loved your old lite rom as well. i have been using it till now. like till 4 days ago. Now will check this too...
Rom seems good so far
rom is loaded but the beginning is constantly rebooting, the rom will not open ..
nm180618 said:
rom is loaded but the beginning is constantly rebooting, the rom will not open ..
Click to expand...
Click to collapse
Before installing rom. Install moro kernel v5.2 or below or maybe tgp kernel.
Bec the rom doesn't install any kernel. So the already install kernel is not supported by the rom so it reboots again and again.
You can install it after the rom but then you have to manually flash the magisk v18
kienzi said:
lol respect his work then
Click to expand...
Click to collapse
It has the exact same features that other roms have, even less, normally developers give some personality to their roms, e.g close to stock, performance, custom UI....
PopDavid said:
It has the exact same features that other roms have, even less, normally developers give some personality to their roms, e.g close to stock, performance, custom UI....
Click to expand...
Click to collapse
His previous rom was called lite. So afaik this rom is also lite. And i really like it and using it
Is there a new version. When I click the download page I get a 3rd June build but not able to find its changelog
monte22 said:
Is there a new version. When I click the download page I get a 3rd June build but not able to find its changelog
Click to expand...
Click to collapse
Hmmm. I downloaded one on may 29. And like you i found no comment or something about june 3 build. Maybe its same....
---------- Post added at 09:09 PM ---------- Previous post was at 08:59 PM ----------
monte22 said:
Is there a new version. When I click the download page I get a 3rd June build but not able to find its changelog
Click to expand...
Click to collapse
i think he uploaded new with pie theme or icon.
check it here maye he mostly post it here..
Mod edit: 4pda links are not allowed on XDA.
I've been trying to locate Magisk 18.2 and have been unsuccessful!
Does anyone have a copy or a link?
Usually when he chooses to use older firmware, it's for a reason.
I debloated this ROM with an Aroma Installer/Titanium Backup and this thing is not only blistering fast but I've been able to squeak out 8 hours of SOT. However, I can't get a couple Magisk modules to install so I need to reinstall it to get this ROM working perfectly!
Thank you Vova, you're awesome.
Room G935FXXS5ESF8 STOCK SER
Android Version : MIUI 11 Pie 9 Ported From MM2 Easy recovery install.
You should be having proper knowledge of flashing Custom ROM and how to Restore a phone if anything goes wrong.
Take complete backup before taking any action based on this thread. I am not responsible for any action taken by you.
I am just compiling all the information / files available on different websites into this thread, I have patched together with cyber spit, bubblegum, and tape, for a pretty much fully working Miui 11 PIE running rom. I have removed what I believe to be all of the bloat. Worked to modify a working miui pie vendor. Magisk 19.5 installer is all ready included as well as the modified boot for root access. The playstore installer is also included for a fully functioning playstore.
All Credit goes to respective developer/s included in the install.txt within the zip file. I request XDA moderator and or Developer of Respective files to let me know if I have forgotten to mentioned (give credit) their name in this thread. The Download Links are given directly from respective Developer/s.
You need the following two files to Test MIUI 11 PIE on Mi Max 2 (Oxygen). This ROM recovery is ported from the Xiaomi RedMi with many patches and customized from various sources. This ROM maybe Stable enough for your daily use on Mi Max 2. I have access to two MM2 4/64 Global versions using a 1tb sd card one on At&t the other on Tmobile and all features I need are currently working.
1a. Treble Mi Max 2 Recovery 3.2.1 https://androidfilehost.com/?fid=5862345805528056270
1b. OrangeFox Recover 10
https://sourceforge.net/projects/ora...n.zip/download
2. MIUI 11 Pie ROM ported from MM2
https://drive.google.com/folderview?id=1KfWqQmi7bN_yXZfgVzxiifWuS2jDozCr
First step:
Start your phone into recovery and Flash a Treble recovery, if already not flashed. Restart into Recovery.
Click Wipe then Advance wipe and clear System, Vendor, Boot, Data, Cache, and Dalvick cache.
Second step:
Now Extract the Downloaded Rom files in Recovery backup folder. You should know where and how to Extract. (Use extract tool for android or pc then copy paste to recovery backup folder.)
Third step:
Click Restore and Select System, Boot, Vendor and Swipe to confirm. Wait for restore to complete. If any errors, Reboot recovery and try again. Or Mount the System, Vendor, Boot and try again. After Restore completes Reboot. Please allow 3-5 Minutes for first boot.
What works:
Cell Service, Wifi 5ghz/2.4ghz, Bluetooth, Torch, Camera, Sound, Auto Brightness, HW buttons.
What doesn't work:
Some people can't log in to Xiaomi account ( I do not use it, So I can not verify either or).
I do not have dual 4G sims so I can not verify if its working. There may be potential signal problems for some user but I didn't faced in USA with Tmobile, Or AT&T operators.
Eye protection mode/ reading mode 100% does not work, But similar apps available within the play store.
Playstore Installer Included & Now Working. (Due to the chinese base)
Guys, this is a nearly perfect MIUI 11 PIE package for our lovely Xiaomi Mi Max 2 (Oxygen) Although MIUI 11 is still beta.
If I missed anything in the above, kindly let me know to include. If you make any further updates / patches that makes this ROM more stable / perfect or enables new features, please don't hesitate to message me to include in this thread.
I have an old PC running windows with 8gb max at any one given time, So if you would like to make the recovery image into a flashable zip, I'd be happy to update/add it.
If you can afford it, Im trying to save for a computer from this decade, any help is appreciated
https://www.paypal.me/LiamMcGinnisIv
If you would like to use the boot, vendor, system, or any other files, All I ask is pass on the proper credits. With this we should be able to have a fully functioning android Q in the near future (Currently toying around with fair progress in the free time).
Credits : liammc83 HR83 beingtejas letolover77
lekhraj.gupta WhatsNew Any Others Who May Have Been Missed
Best of Luck and Happy Flashing )
reserved
Download, tks
I will try today. Thanks!
Famous pie inCall volume bug solved ??or is still there ??thanks to developer for the hard work bro u rock...
faraaz3 said:
Famous pie inCall volume bug solved ??or is still there ??thanks to developer for the hard work bro u rock...
Click to expand...
Click to collapse
In all miui based rom, In call volume is much louder than other custom roms. and also no echo issue in miui roms.
Outstanding!
Only wish there was a way to install this for use with dual boot patcher in order to test it out.
Does camera app works? I have crashes with message: "Could not find tag for key xiaomi.ai.asd.enabled".
why MIUI 11 PIE 9.9.9 from Connor when there is 9.9.24 available, here is the link for MIUI 11 PIE 9.9.24 for Mi Max 2 from Connor https://c-t.work/s/2147a4b6b1c34e
cheers
maheshkondraju said:
why MIUI 11 PIE 9.9.9 from Connor when there is 9.9.24 available, here is the link for MIUI 11 PIE 9.9.24 for Mi Max 2 from Connor https://c-t.work/s/2147a4b6b1c34e
cheers
Click to expand...
Click to collapse
Basically the same gsi source. But older patched boot, older magisk, and play store installer will not work with conner, yet its labeled *.24
But hey either or, flash what y'all want. If I knew someone was going to keep this updated, and work out the bugs as Xiaomi releases 11 tomorrow, I would just go back to playing with A10.
After all I don't even use these mi max 2s any longer. Was just trying to contribute to the old gang.
Lol , reason why I left.. they insult the older devs who use there time for them
liammc83 said:
Basically the same gsi source. But older patched boot, older magisk, and play store installer will not work with conner, yet its labeled *.24
But hey either or, flash what y'all want. If I knew someone was going to keep this updated, and work out the bugs as Xiaomi releases 11 tomorrow, I would just go back to playing with A10.
After all I don't even use these mi max 2s any longer. Was just trying to contribute to the old gang.
Click to expand...
Click to collapse
By the way.. gapps aroma is directly flashable on your built.. my friend asked me to do that on his max 2 and I did many other changes ,
Fingerprint issues remains their.. but everything else is great and working perfectly.. all gapps are working without bugs and also i removed several apps inbult like mi ai, keyboard , etc etc..
Well good luck guys here.. we won't disturb you guys here..
Liammc83 great work bro.m
beingtejas said:
By the way.. gapps aroma is directly flashable on your built.. my friend asked me to do that on his max 2 and I did many other changes ,
Fingerprint issues remains their.. but everything else is great and working perfectly.. all gapps are working without bugs and also i removed several apps inbult like mi ai, keyboard , etc etc..
Well good luck guys here.. we won't disturb you guys here..
Liammc83 great work bro.m
Click to expand...
Click to collapse
Every time I flashed on my end kept crashing system (black screen sticks), odd. Its why I dumped in the chinese play store installer v3.
But nice to know its working
None of any of this could have been accomplished without you or hardrock 83.
Can we flash pietreble kernel on it?
What about stock camera app? Does it work? Mine is crashing.
zavorotnii said:
What about stock camera app? Does it work? Mine is crashing.
Click to expand...
Click to collapse
It force closes, yes, crashes....Working on fixes.
liammc83 said:
It force closes, yes, crashes....Working on fixes.
Click to expand...
Click to collapse
Ah, thanks! I thought that I did something wrong.
@shivanshgoel said:
Can we flash pietreble kernel on it?
Click to expand...
Click to collapse
Hardrocks V5 kernel tweaked from beingtejas works, yes.
zavorotnii said:
Ah, thanks! I thought that I did something wrong.
Click to expand...
Click to collapse
Please give the camera fix
Manjubailur said:
Please give the camera fix
Click to expand...
Click to collapse
Nope didn't notice..
Fixed now (On My End), working on a few adjustments, ect.
Will be uploaded today with some tweaks.
Is there a way to remove the on-screen navbar without having to enable full screen gesture? I prefer hardware buttons. And one more thing, how to disable the rounded corners? Apart from these two probs and known bugs, this ROM has been decent so far. Thanks!
Hello, Today I sucessfully port Oxygen OS from OnePlus 6T (ErfanGSIs) for this beautyfull device.
Its based on Android 10 with preinstalled Magisk(because Magisk help me fixing some stuff).
Its Fox/Twrp recovery backup and have over 5GB.(download size is 1.7gb because not every one have fast internet)
Its running on MengT kernel R1.8.0.
What works:
everything except : WiFi display (Not tested yet because I forgot set in overlay "<bool name="wifi_display_enable">true<bool/>" )
Bluetooth Audio (bluetooth works but if you connect headphones or bt speaker audio not work)
Always On Display (just black screen without clock or battery percentage)
Included Apps: Open Camera, YT, Gmail, Google photos, OnePlus Aplications, and some other stuff....
Some Answers for recently asked questions:
Magisk need sets up please download......... just ignore it click cancel and you get fully working super user
Module did not installed update magisk...... Magisk version is 19.3 because this is only version to make bootable this port.
Open Camera has not permissions..... you must update from Play Store.
If some oneplus apps didnt open or open not correctly you must set theme to colorfull (because overlays)
If you want dark mode set theme colorfull and then go to developer options to enable "override-dark mode".
WARNING
DO NOT UPDATE MAGISK because you get bootloop OR update if you known some working versions on erfan GSIs(and please share me).
Credits : https://forum.xda-developers.com/member.php?u=6298645
https://forum.xda-developers.com/member.php?u=8704698
Download Link: https://mega.nz/folder/hvwgXY7b#Jqr0_3ry5quNtFj81h0B4w
Samuel Ladziansky said:
Hello, Today I sucessfully port Oxygen OS from OnePlus 6T (ErfanGSIs) for this beautyfull device.
Its based on Android 10 with preinstalled Magisk(because Magisk help me fixing some stuff).
Its Fox/Twrp recovery backup and have over 5GB.(download size is 1.7gb because not every one have fast internet)
Its running on MengT kernel R1.8.0.
What works:
everything except : WiFi display (Not tested yet because I forgot set in overlay "<bool name="wifi_display_enable">true<bool/>" )
Bluetooth Audio (bluetooth works but if you connect headphones or bt speaker audio not work)
Always On Display (just black screen without clock or battery percentage)
Included Apps: Open Camera, YT, Gmail, Google photos, OnePlus Aplications, and some other stuff....
Some Answers for recently asked questions:
Magisk need sets up please download......... just ignore it click cancel and you get fully working super user
Module did not installed update magisk...... Magisk version is 19.3 because this is only version to make bootable this port.
Open Camera has not permissions..... you must update from Play Store.
If some oneplus apps didnt open or open not correctly you must set theme to colorfull (because overlays)
If you want dark mode set theme colorfull and then go to developer options to enable "override-dark mode".
WARNING
DO NOT UPDATE MAGISK because you get bootloop OR update if you known some working versions on erfan GSIs(and please share me).
Credits : https://forum.xda-developers.com/member.php?u=6298645
https://forum.xda-developers.com/member.php?u=8704698
Download Link: https://cb.run/35z0
Click to expand...
Click to collapse
Do you have any screen shot?
KackBarton said:
Do you have any screen shot?
Click to expand...
Click to collapse
well i didnt but I go make it plz wait (I must restore this port because i reflashed stock miui because iam using bt headphones every day but on this rom is not work:crying
DO NOT USE its seems to be
well after restoring I have rescue party i try to fix it
well I Fix It, there is the problem In firmware version I upload files on to mega.nz
Update V1.0 + screen shots
Information about this rom update:
:MTP not working (Only PTP)
:lockscreen camera shortcut didnt wok because there is not OnePlus camera
:FaceUnlock didnt work
:in this rom is my own port of stock xiaomi music
:all these overlays and fixes are edited by apk editor pro v1.9.6
how to flash :
open download link (its mega.nz)
open folder "10"
download folder cust,persist,tz patch for OxygenOs
after that download the recovery backup OxygenOs_lavender_Q***********.zip
format system vendor data
flash tz.mbn.img
flash cust.img
flash persist.img
after that put the backup of the rom in to /"internal storage or sdcard"/"Fox or TWRP"/BACKUPS/"serial number"/
restore the backup
wipe cache/dalvik
reboot
frirst boot is litle bit longer
after that setup your device and all of the stuff
there are some screenshots
Samuel Ladziansky said:
Hello, Today I sucessfully port Oxygen OS from OnePlus 6T (ErfanGSIs) for this beautyfull device.
Its based on Android 10 with preinstalled Magisk(because Magisk help me fixing some stuff).
Its Fox/Twrp recovery backup and have over 5GB.(download size is 1.7gb because not every one have fast internet)
Its running on MengT kernel R1.8.0.
What works:
everything except : WiFi display (Not tested yet because I forgot set in overlay "<bool name="wifi_display_enable">true<bool/>" )
Bluetooth Audio (bluetooth works but if you connect headphones or bt speaker audio not work)
Always On Display (just black screen without clock or battery percentage)
Included Apps: Open Camera, YT, Gmail, Google photos, OnePlus Aplications, and some other stuff....
Some Answers for recently asked questions:
Magisk need sets up please download......... just ignore it click cancel and you get fully working super user
Module did not installed update magisk...... Magisk version is 19.3 because this is only version to make bootable this port.
Open Camera has not permissions..... you must update from Play Store.
If some oneplus apps didnt open or open not correctly you must set theme to colorfull (because overlays)
If you want dark mode set theme colorfull and then go to developer options to enable "override-dark mode".
WARNING
DO NOT UPDATE MAGISK because you get bootloop OR update if you known some working versions on erfan GSIs(and please share me).
Credits : https://forum.xda-developers.com/member.php?u=6298645
https://forum.xda-developers.com/member.php?u=8704698
Download Link: https://mega.nz/folder/hvwgXY7b#Jqr0_3ry5quNtFj81h0B4w
Click to expand...
Click to collapse
I'm using this port from another developer much more stable
LEANDROMENDES said:
I'm using this port from another developer much more stable
Click to expand...
Click to collapse
Interesting
Samuel Ladziansky said:
Interesting
Click to expand...
Click to collapse
Is tour ROM prerooted? Is there any update in future?
KackBarton said:
Is tour ROM prerooted? Is there any update in future?
Click to expand...
Click to collapse
I'm sorry to answer so late. This rom is prerooted and updates are not planned.
there is update for magisk : https://mega.nz/file/AvgS2aKD#hDRhaCEgAIgDsAxlq3Q4PIRnqcIRingCSow8gUc861M
version 21.4
I think you should make a flashable zip out of this gsi, it's way more efficient to flash than a backup
In rooted os UPI apps does not work.
Please confirm , Is this ROM pre rooted for sure?
testingpatiala2 said:
In rooted os UPI apps does not work.
Please confirm , Is this ROM pre rooted for sure?
Click to expand...
Click to collapse
Yes is rooted via magisk, and what is UPI apps? Because I didnt heard about it.
Update 1:
1 January 2022 Security Patch Update
Better Picture And HDR Processing
100% Camera Quality Instead Of 95%
Faster Performance Without Special Kernel
All Goodlock Modules Included (Located In /system_root/system/GoodlockModules Or /system/GoodlockModules
More Build.prop Tweaks
Add Bixby Vision
Add More Features
Update 2:
Add Fun Mode
Faster Performance
Add Google Fonty
Add S21 Fingerprint Animations (Thanks @soulr344 )
Add Android Auto
Update Samsung Free Apps
Update 3:
Improve Performance
Radio Crash,Fix Soon
Add New Call Background Preloaded
Single Take Can Be Detect More Objects
Knox Remove So Secret Mode In Samsung Internet Works
Update 4:
1.Voice Recorder Preloaded For Who Need It But It Not Impact Performance
2.Voice Recorder And Radio Fix In M21
3.(M31s,F41,M31 Only)
Full Features Pro Video
4.Your Phone Apps Remove, Install Your Phone Companion App From Play Store To use Link To Windows
5.Better Performance From More Debloated
6.Improved Stablity
7.GoodLock App Pre-install (Not Impact Performance)
8.Initial Galaxy F41 Builds
Update 5:
1.Better Performance And Networking
2.Add New Camera Features (Quick Reviews)
3.Network And Graphics Throttling Fix
4.GameOptimizingServices Remove
5.Faster Google Discover Open
6.Battery Is Little Bit More Drain But Fix After Turn Power Saving On (For Performance)
7.Dialer Crash And Blocking Messages/Call Are Fix
Update 6:
1.Full Features Link To Windows (Open App On PC,Call On PC)
2.Fix Camera Failed When Apply Video Filters
3.Improved Wifi Scan
4.Fix Camera In M21
5.Use 3.6 As Base Again To Prevent Bug And More Smooth
Update 7:
One UI 4.1 Update
Update 8:
Fix Pro Mode On M21
Fix Face Scan Animation
Add Voice Recorder Features
Update 9:
Added Extra Dim
Added Additional Fonts
Improved App Opening Performance
Improved Battery Life
Spoiler: Features
1.Productivity:
Bixby Voice
Bixby Routines
Samsung Free And Google Discover
All Goodlock Modules Working!
Full Features Link To Windows
Link Sharing
Full Features Screen Recorder And Screen Capture
Full Soundalive
Music Share
Quick Share
Call And Text On Other Devices
Continue App On Other Devices
Wifi Calling (Yeah it exist in stock also)
Fun Mode On Camera
More Single Take Detection Features
Quick Review
Switch Lens While Recording Video
S21 Fingerprint Animations
Super Fast Charging Animations When Phone Power Off And Plug in Charger
2.Performance:
Select Processing Speed in Panel
Debloated But Keep Main Features
Low Memory/Ram Usage! (For Me It Use 2.5gb of 6gb)
How To Install:
Download zip
Flash zip in recovery
Flash Magisk (Required)
Go to wipe > advanced wipe > data then wipe to keep file in internal storage or format data if you dont want to keep
Reboot
Finish
Download:
https://drive.google.com/file/d/1ldSlNUNFHrinZEdb-ZEC20I8iOdXgb7Y/view?usp=sharing
Credits:
@BlassGO For Installer
@neel0210 For Kernel i use
https://forum.xda-developers.com/t/build-props-tweaks.4252889/
For Build.prop tweaks
Kernel Sources
GitHub - topser9/kernel_samsung_Exynos9611: Kernel source for the Samsung Galaxy A51/M21/M21s/M31/M31s (Exynos9611) ONEUI3 GSI selinux Permissive MTP Voltage contro Gpu Overclock cpu
Kernel source for the Samsung Galaxy A51/M21/M21s/M31/M31s (Exynos9611) ONEUI3 GSI selinux Permissive MTP Voltage contro Gpu Overclock cpu - GitHub - topser9/kernel_samsung_Exynos9611: Kernel sourc...
github.com
Thanks
Flylarb
*I Wont Accept Any Donations Since I'm Kids And Making Rom Is My Hobby
https://forum.xda-developers.com/conversations/your-phone-number.14509319/#convMessage-14754733
Click to expand...
Click to collapse
Thanks.
Hi Flylarb, do you have the updated Fixpermission.zip file? I wanted to test it on M215G.
I'm not able to login to both telegram or discord for some technical reasons.
OldNoobOne said:
Hi Flylarb, do you have the updated Fixpermission.zip file? I wanted to test it on M215G.
I'm not able to login to both telegram or discord for some technical reasons.
Click to expand...
Click to collapse
Oh
It doesn't need
Thank you for the ROM. I have a stock m21 device, never rooted, never boot unlocked.
You have listed -
Flash zip in recovery - Do you mean the stock recovery? Do I need to do boot unlocked or something for this work?
Do you want me to flash the zip file directly from stock recovery on my untouched device?
@Flylarb
abhi_1245 said:
Thank you for the ROM. I have a stock m21 device, never rooted, never boot unlocked.
You have listed -
Flash zip in recovery - Do you mean the stock recovery? Do I need to do boot unlocked or something for this work?
Do you want me to flash the zip file directly from stock recovery on my untouched device?
@Flylarb
Click to expand...
Click to collapse
Twrp need
Hello, could you share your "camera-features.xml" files for M21 - A41 ... I want them to review and compare with my device
Mon Autre Monde said:
Hello, your link is not working, i want the "camera-feature.xml" file
Click to expand...
Click to collapse
Wait
I will update the link
Hmm, looks yummy (love the : Faster Performance Without Special Kernel, part !) many thx for your hard work sir, i've flashed a custom rom / kernel, albite boosting performance, the kernel changed my device name to m21 shark.. something, which is inconvenient, cuz i cant re-install some native apps like smarthing..
Do i need to re-flash vanilla rom before i proceed with your rom, or do i just follow your instructions ?
Cheers
Also, a big yesssss to future updates, i dont mind bying you some beers, for them.
some debloated version, would be definitely appreciated. i have the 4gb ram version.
Gone ahead and tried to install, got error bout Digest verification failed.
Atrosincity said:
Gone ahead and tried to install, got error bout Digest verification failed.
Click to expand...
Click to collapse
Skip it
Atrosincity said:
Hmm, looks yummy (love the : Faster Performance Without Special Kernel, part !) many thx for your hard work sir, i've flashed a custom rom / kernel, albite boosting performance, the kernel changed my device name to m21 shark.. something, which is inconvenient, cuz i cant re-install some native apps like smarthing..
Do i need to re-flash vanilla rom before i proceed with your rom, or do i just follow your instructions ?
Cheers
Also, a big yesssss to future updates, i dont mind bying you some beers, for them.
some debloated version, would be definitely appreciated. i have the 4gb ram version.
Click to expand...
Click to collapse
Thats whats great about Flylarb dev, he doesnt accept donations but he still building ROMs n stuff..Great job
indirme bağlantısı çalışmıyor
link is broken
Device: M215F
ROM Version: 3.3
Using this rom from last one week, so far the experience is good. The rom is very smooth and no crashes at all, the rom is full of lot of flagship features which are not part of M21's stock rom. WIFI Calling, Link to Windows, Dual Messenger, AppLock access and other stuff are working perfectly and top of that It comes with the latest security patch which is a great thing. WIFI, and Bluetooth audio is working flawlessly. The UI is smooth and fast as much as stock experience.
Comparing battery backup of this rom with stock is not justice. However, one full recharge gives you upto 24 to 42 hours of good backup, where WIFI was active all the time and use WhatsApp, EMail, Telegram and other texting applications.
The Only thing I was missing in this rom was the Samsung's built-in "Manage App Data" feature but I believe it has been removed by Samsung itself in Android 11. Still, one should definitely give it a try to experience the joy of a good custom rom.
Dear @Flylarb you did a great job!!
hey, can i use this firmware on sm-m215f?
should i unlock oem and enable usb debugging?
PRWR said:
hey, can i use this firmware on sm-m215f?
should i unlock oem and enable usb debugging?
Click to expand...
Click to collapse
You Need To Unlock BL
And Install TWRP With OEM Unlock Had To On
Atrosincity said:
Hmm, looks yummy (love the : Faster Performance Without Special Kernel, part !) many thx for your hard work sir, i've flashed a custom rom / kernel, albite boosting performance, the kernel changed my device name to m21 shark.. something, which is inconvenient, cuz i cant re-install some native apps like smarthing..
Do i need to re-flash vanilla rom before i proceed with your rom, or do i just follow your instructions ?
Cheers
Also, a big yesssss to future updates, i dont mind bying you some beers, for them.
some debloated version, would be definitely appreciated. i have the 4gb ram version.
Click to expand...
Click to collapse
No Need To Flash Vanilla Rom Before
Just flash it in recovery (follow instructions)
It have less ram usage a little bit but i will improve performance without debloat too much
Thanks
Flylarb
OldNoobOne said:
Thats whats great about Flylarb dev, he doesnt accept donations but he still building ROMs n stuff..Great job
Click to expand...
Click to collapse
My Hobby Tho
Hello, the download link is not working right now. This is fine?