Database Develop

[ROM][AROMA][A2017X][B12 7.1.1.][stock] SL!M➅ DF!NR

KNOW WHAT YOU ARE DOING ! I AM NOT RESPONSIBLE OF BRICKING YOUR DEVICE.....
FOR OUR DEDICATED STOCK USERS
Made an new AROMA ROM based on the A2017G-N-B12 stock version. Like the other slim roms it’s just based on stock with some additions and option to debloat further. You can add the JOJOC Battery Tweak later on (as it gave me some troubles to implement on boot) that focuses on improved battery performance. I
It’s fully functional and tested (not on battery SOT). Smooth, no bugs. Magisk/SuperSU fully running without issues.
Hope you’ll E N J O Y !!!
Based on :
A2017G N-B12 STOCK ROM
INSTALL : ( TWRP )
When you're on another ROM, stock (or even on B05-slim,B06-slim² or B08…) and you want a clean install just follow this procedure :
Other models like A2017 and A2017U can flash this too. Only use Universal BL & your specific MODEM ! : https://androidfilehost.com/?w=files&flid=148464
IMPORTANT !!! When coming from a (treble) rom or Oreo rom beware you'll loose your data because you have to revert back to Nougat by wiping/format. When you're on STOCK rom and twrp3210 (or latest) move on to 'FLASH'
For now I'm using the 'old' school method (not yet the Labs Mod).
So follow this to prepare on 'FLASH' :
1. Boot into your twrp (let's say you're on twrp3218treble)
1a. Wipe system/vendor/data/cache/dalvik
2. Flash official twrp3.2.1.0 (or latest) and reboot into recovery AGAIN (not into system !)
3. You will see you have to “cancel” and swype and you’ll have to format again
4. Wipe : /advanced/wipe/choose data/change filesystem to EXT4
5. Then go into wipe : wipe system/data/cache/dalvik to be sure
6. continue with 3a below and so on....
FLASH :
0. In case you want to reflash your own apps, backup your personal apps with f.e. TB, ZipMe... (or whatever)
1. Make a full backup of your current device in TWRP ! (use it to RESTORE if necessary) DON’T FORGET !
2. Wipe cache / dalvik / data / system
3a For G version flash : A2017G-N-B12-bootstack : https://androidfilehost.com/?fid=1322778262903993157
3b For U and CN version flash Universal BL+your MODEM : https://androidfilehost.com/?w=files&flid=148464 ! Don't forget to flash twrp 3.2.1.0 afterwards !
4. Install : AROMA A2017X SL!M➅ DF!NR : https://androidfilehost.com/?fid=1322778262904005937
5. Choose your stuff to add or debloat, let it RUN and reboot, wait…a minute…
6. Done ! No more no less
AFTER INSTALL :
0. Use Jojoc Tweak for best battery result :
A2017X_JojocV2_SuperSU : flash in twrp
A2017X_Jojoc_magiskmodule_v2.1: flash in MagiskManager
A2017X_Jojoc_magiskmodule_v3.2: flash in MagiskManager
1. Go into Adaway/give root permission/download files etc. and update DONE!
2. Go into PlayStore/settings and check “no auto updates” ! Otherwise the Youtube app will update again to that TERRIBLE ANNOYING ADD state!
3. Check with f.e. Kernel Adiutor, when you added JoJoc Tweak, if it’s running ok and see if values are matching like here : https://forum.xda-developers.com/showpost.php?p=75431784&postcount=2
4. If choosen Magisk leave it as Magisk 16.7 (other ones bootloop as known)
INFO :
Stripped off :
Accuweather
Browser (ume)
Chrome
Email
Maps
Touchpal (+languages)
ZTE clock replaced by Google Clock
ZTE calendar replaced by Google Calendar
ZTE File mananger replaced by ES ( you can replace it in aroma )
….......
Baked into :
AdAway
Google Calender (you can remove this later if you want)
Google Clock (you can remove this later if you want)
Youtube Black themed addfree
Minor Modifications :
Boot :
• Dm-verity disabled
Zip aligned apk’s
Build.prop tweaks : (remove them in system/build.prop if not needed)
• Improved performance
• Faster boot
• Phone rings immediately
• Wifi scan interval 180sec
• Better call voice quality
• Better network signal
Added sounds LOS
Faster UI (scaling 0.25)
AROMA Features to choose from :
• Debloat most remaining apps
• Choose SuperSU or Magisk
• Add Google Dialer
• Add Google Keyboard
• Center Clock
• ......
Hope you'll E N J O Y !!!
Contributors :
me, myself and I
Credits :
@amarullz
 @SuperR.
 @nfsmw_gr (for our work together on his JoJoc tweak , thnx !) 
 @kenet (for his centerclock script i recompiled – Thnx !) 
 @ZaneZam (iYTB Thnx !)
@Chainfire
 @topjohnwu
@jcadduono
ROM OS Version : 7.1.1 Nougat MiFavor 4.2
Source : ZTE stock-rom A2017GV1.2.0B12 / original ZTE upload/reuploaded : https://dl1.ztems.com/zxmdmp/downlo...K/ZTE/ZTE A2017G/452783/fota_B15_MR_B17_MR.up
Kernel : stock
Version Information :
Status : Stable
Created : 2018.09.15
Uploaded : 2018.09.15
Android Security Patch Level : 2018.07.01

-----

thx.

I heard chinese nougat released update also,can we get a build from that?
Thanks for this build.

Thank you!
I am currently on B10 slim, do you think I can dirty flash it over?

romitkin said:
Thank you!
I am currently on B10 slim, do you think I can dirty flash it over?
Click to expand...
Click to collapse
Preferable would be a clean flash though.
You can try but the aroma setup and endresult might differ although the initial aroma layout is quite the same.
The Jojoc module/zip has to be fashed afterwards now when you want to apply.
Do take a full twrp backup of your existing rom. You can always revert back

Many thanks for this! I decided to move over to LG V30 but want to put the Axon7 back to rooted stock & give to my wife.

hide bootloader msg zip problem
Since I'm planning on handing this over to my wife, who like things "simple" thought I would try your zip to hide the BL message at boot, flashed the zip , but it show ZTE boot screen twice, then goes right back into recovery. Any easy way to uninstall the zip, or do I need a complete do over?
thank you!

christoophat said:
Since I'm planning on handing this over to my wife, who like things "simple" thought I would try your zip to hide the BL message at boot, flashed the zip , but it show ZTE boot screen twice, then goes right back into recovery. Any easy way to uninstall the zip, or do I need a complete do over?
thank you!
Click to expand...
Click to collapse
Did you flash supersu or Magisk? Do that for starters again.

raystef66 said:
Did you flash supersu or Magisk? Do that for starters again.
Click to expand...
Click to collapse
Actually yes, before I flashed the BL zip I uninstalled Magisk using uninstall zip & reinstalled 17.1, then the BL zip.
Ended up starting over, realized during Aroma that I had uninstalled apps I wanted to keep! (lol better learn to read some day)
Still not sure why BL didn't work , as I'm on a A2017G like you.
Noticed that DTTO isn't working. Is that a setting somewhere or is it actually like that always? Been a while since on stock ROM...

Thanks for the rom. Will flash it the next days. <3
christoophat said:
Actually yes, before I flashed the BL zip I uninstalled Magisk using uninstall zip & reinstalled 17.1, then the BL zip.
Ended up starting over, realized during Aroma that I had uninstalled apps I wanted to keep! (lol better learn to read some day)
Still not sure why BL didn't work , as I'm on a A2017G like you.
Noticed that DTTO isn't working. Is that a setting somewhere or is it actually like that always? Been a while since on stock ROM...
Click to expand...
Click to collapse
"4. If choosen Magisk leave it as Magisk 16.7 (other ones bootloop as known)"

Hi !
Thx for this ROM. I was using B10 slim for a long time and decided to flash this over. So far I don't see much difference besides the
security level (which is good, B10 was a great ROM).
romitkin said:
Thank you!
I am currently on B10 slim, do you think I can dirty flash it over?
Click to expand...
Click to collapse
I dirty flashed B12 over B10, no issues so far.
regards

Hmm, I'm hitting the same snag on B12 that I did on B10 months ago. Trying to enter/use Personal Dictionary just won't work. Crashes settings. Been a long time so I forgot if a reason for that behavior is known.
LG G3 D851, PAC-MAN LP ROM, MultiROM, XDA Legacy

Hit another snag. Wanted to use Button Mapper which requires Accessibility. Any attempt at enabling Accessibility (for any app) causes the ROM to restart.
I'll grab logs later if needed.
Moto G5S Plus XT1806, Lluvia OS v1.4-NATURMADE, MultiROM, XDA Legacy

i saw this b12 mod on p4da https://4pda.ru/forum/index.php?showtopic=778560&st=2840#entry76984514
it has a 20band dolby atmos and magisk
Can someone grab the dolby file and put it on androidfilehost? i cant download files from that page.Only yandesk allows me

marcdw said:
Hmm, I'm hitting the same snag on B12 that I did on B10 months ago. Trying to enter/use Personal Dictionary just won't work. Crashes settings. Been a long time so I forgot if a reason for that behavior is known.
LG G3 D851, PAC-MAN LP ROM, MultiROM, XDA Legacy
Click to expand...
Click to collapse
marcdw said:
Hit another snag. Wanted to use Button Mapper which requires Accessibility. Any attempt at enabling Accessibility (for any app) causes the ROM to restart.
I'll grab logs later if needed.
Moto G5S Plus XT1806, Lluvia OS v1.4-NATURMADE, MultiROM, XDA Legacy
Click to expand...
Click to collapse
Hi Marc, can you flash this as a test to your PD.
As foor the ButtonMapper someone should test this (as I'm not on this one atm). Did the BM worked on G-B10 ?
What you also could do is flash the EDL G-B12 and see what happens related to the BM.

Predatorhaze said:
i saw this b12 mod on p4da https://4pda.ru/forum/index.php?showtopic=778560&st=2840#entry76984514
it has a 20band dolby atmos and magisk
Can someone grab the dolby file and put it on androidfilehost? i cant download files from that page.Only yandesk allows me
Click to expand...
Click to collapse
I take it it's one of the two files in the screenshot? I tried to get them but got 404 on the download page.

marcdw said:
I take it it's one of the two files in the screenshot? I tried to get them but got 404 on the download page.
Click to expand...
Click to collapse
i dont mean those 2.Follow the link i have posted (ZTE AXON 7 V1.2.0B12 DEODEX VERSION 2.0
Full firmware 7.1.1)
Updated the firmware V1.2.0B12
1. DEDEKS
2. It's completely cleaned from Google junk (you can install it from PlayMarket - it's the way it's left by the way)
3. Returned the stock El.Post + Weather widget ZTE
4. Implemented the Xperia keyboard
5. Installer was removed from the installer Magisk (put the knobs)
6. Stock DolbyAtmos + mixer
7. Introduced themes from the American version of B35
8. Removed signature verification of applications
9. Stock, net runoff
Addons
-20-band equalizer Dolby Atmos, in the sink 5 strips
i get same error when try to download.U need a account on p4da.I cant register cus of russian security check
Its a nougat dolby atmos with 20band equilizer like in dolby atmos oreo.
He also claims better battery life '' it will be better on autonomy, because there is no Guglokhma ''
What is Guglokhma? cant find anything much about it

raystef66 said:
Hi Marc, can you flash this as a test to your PD.
As foor the ButtonMapper someone should test this (as I'm not on this one atm). Did the BM worked on G-B10 ?
What you also could do is flash the EDL G-B12 and see what happens related to the BM.
Click to expand...
Click to collapse
Thanks. That zip worked perfectly. I can now go into and edit the dictionary. ?
Apologies for being unclear. No issue with Button Mapper. I'm unable to activate accessibility service for any app that may require it (BM, Greenify, etc).
First one selects the app and flip the on/off toggle at upper right. Confirmation dialog pops up detailing the services needed. When selecting OK the ROM soft reboots.
Could be a "just me" thing. ?

Can someone grab the dolby from this link? https://4pda.ru/forum/index.php?showtopic=778560&st=2840#entry76984514

Android P 9.0 for s6e+ BETA

To go into deeper detail on the ROM, I used Lineage 16.0 20180901 s6 build modified for the s6 found here:
https://forum.xda-developers.com/ga...20x-5x-nexusos-9-0-samsung-galaxy-s6-t3843199
It was also based on NexusOS kernel that has been modified, so a big shout out to Team Nexus for the kernel and rom, and to @lukasb06 for porting it to s6.
The original kernel was by Team Nexus for s6 and s6e
Kernel Features;
v2.0: first support Pie on s6e+ and n5
change log:
support N5-s6e+ (ready for daily usage)
bug: BT, GPS, NFC
deep sleep fixed, init.d support, dyninteractive and a lot of kernel code changed.
the kernel can be found at :
https://github.com/slaminger/android_kernel_samsung_exynos7420
**I have made some modifications, added a shim, added code to the init.rc to disable p2p wifi. Moving forward the modifications to the kernel will be done by myself.
Please read and follow the instructions :
New zip uploaded for November. Each month has its own folder
This is not fully functional yet but it is close, no Bluetooth, no NFC. the two buttons next to home don't work yet(a couple of temporary solutions below)
BACK UP YOUR CURRENT ROM! especially efs. Some people have ril issues, I noticed my imei changed. A quick efs restore fixed it and my sim worked again.
The home button can be set to double tap for recent apps and use opera browser for compensation of no back button as they have their own, or download back button from play store to add floating buttons to screen. Some versions have buttons pre installed.
I can get bluetooth not to crash, but it doesn't connect.
Wifi Hotspot not working.
Now that the bad is out of the way.
Install Instructions Below:
The call audio and WiFi works, camera works(lower res for video to 1080), magisk is working but apk requires manual apk install, audio works, headphones, video, gapps, everything I have tried besides the above is OK.
The install is a process, first flash the ROM, then the pie fix, then no NFC, and then flash the boot.
Img and start the ROM. set your WiFi and take a look around, give it a moment to run). After first boot, reboot to twrp and flash gapps. If you do it all at once gapps crash sometimes. Once you have this all set up and good to go then add magisk.
9.0SeptSecurity is a different version from the august security not just in the sense that the security patch is different, but also the august build is N920 where the September build is G920F. One is from a note one from s6. It is possible one might resolve a bug that is in the other for your device, i am honestly not sure. different people report different bugs on the same device. If bluetooth does happen to be in one of the zips it will likely crash a lot. remove it via twrp by mounting system and then going to system/app and delete the bluetooth and bluetoothmidi folders.
The reason for lowering rear camera to 1080p for video is that it gets buggy at the 4k default.
A big thank you to NexusOS and LineageOS for their 9.0 lineage 16.0 s6 ROM which I used as a base to port this to our device!
i would also like to thank @topjohnwu for Magisk.
And @MirzaAwais for the Pie fix zip
Link for zenltecan:
https://mega.nz/#F!vKZ2UIzZ!BRrSiAxmz2DOjGmnkl26uA
Link for zenlte:
https://mega.nz/#F!Peo0FAjL!_eknpYZl8Ih-x2Hr9vSysg
Link for common files to be flashed on every device:
https://mega.nz/#F!yewjES6B!71Yrg0zaIzAys0wjxvMOzA
Link for Noblelte:
https://mega.nz/#F!DH4HSS7I!0MusytbbTqTsnWB6XzR2Bg
Modified RIL fix to disable P2P WIFI (connect droid to droid without internet, this saves battery life)
https://mega.nz/#F!OOwBmCJb!n7zaoutCLw74vsVTmXUjvg
Link for zenltetmo:
https://mega.nz/#F!7D5xhQab!WgqIleQph7goPHVVSVo1lA
New Multirom for note 5 and s6e+
https://mega.nz/#F!es4wnQjI!sCZqFZiJbhQr1BtEKYKzYw
It's a bit slow for the first little bit while setting up and whatnot, but once you get everything running it works fine. You can use kernel auditor if you find your battery is dying a little too fast.
I am VERY open to suggestions and or help with this, as it is my goal to fix the bugs and have a fully working 9.0 for our device. The buttons are a priority for me.
To briefly summarize: you sacrifice the back button, pages button, and Bluetooth and get 9.0. Everything else works. I've got viper4android going via magisk, the audio fx work. The ROM has a LOUD volume. So if you like music, enjoy. The back button/page has a work around(most apps have a back button), and you can get an app from play store called back button which gives you the home, back and recent button as tiny floating screen icons also, in the meantime. so just bluetooth really. Use modified cam perm boot shim.img
Enjoy

I removed Bluetooth from the ROM intentionally because it crashed constantly and was hard to disable for people unfamiliar with twrp. No NFC.
The camera has been modified to address pipeline errors that caused it to not work in other builds, it is now fully functional up to 1080p video.
The advanced menu seems to be working fine.
Magisk successfully installed with the following modules tested: Viper4Android, Sony Framework, Sony Music, Audio Modification Library, Sys Config Patcher.
SUBSTRATUM DOES NOT WORK ON ANDROID PIE. This is because google does not want us using OMS for custom themes. they disabled it on purpose. i do not believe systemless substratum will be possible moving forward on any device running pie. atleast not at the time being.
**** Solved** see next post** Netflix not currently working, I googled and found many users on pie are having issues.
Superuser works also, but magisk has modules.
More details will be coming.

All gapps 9.0 working on sm-g928
W8, I used the full aroma package and installed everything. However pixel launcher with assistant in the search bar will not work if you install the new Google webview. The built in Google now launcher will work, and I have tried Nova launcher prime. Keep in mind the more gapps you install the slower your device can get. it is best to only install what you need. i installed everything just to see what worked. but i noticed my phone was slower after a while.
The camera is only confirmed working on g928w8 Canadian, g928g, g928f international/american, note 5 N 920variants. Others have reported bugs.
Netflix Netflix-6.13.0_build_29940.apk confirmed working, both cast and watching videos.

Congrats! Will this rom work on Note 5 N920C too ?

ThePscho said:
Congrats! Will this rom work on Note 5 N920C too ?
Click to expand...
Click to collapse
It could be made to work yes, there is an alpha note5 ROM already on xda

so i flashed the ROM. very stable i can say, but unfortunately the camera still does not work. i was able to install google camera mod via adb but still the same problem. it does not crash tho. it's just not starting

Dread2000 said:
so i flashed the ROM. very stable i can say, but unfortunately the camera still does not work. i was able to install google camera mod via adb but still the same problem. it does not crash tho. it's just not starting
Click to expand...
Click to collapse
Suggestion: if you un-compress the rom(s) and do a search for *camera or camera* does it return any results. I suggest you compare it to a working version and determine what is missing in the system/ system/app and system/priv-app folder(s) once you determine what is missing then just bring those changes over to your folders

AFFAFXP said:
Suggestion: if you un-compress the rom(s) and do a search for *camera or camera* does it return any results. I suggest you compare it to a working version and determine what is missing in the system/ system/app and system/priv-app folder(s) once you determine what is missing then just bring those changes over to your folders
Click to expand...
Click to collapse
i will give a try but i don't think i'm going to make it

AFFAFXP said:
Suggestion: if you un-compress the rom(s) and do a search for *camera or camera* does it return any results. I suggest you compare it to a working version and determine what is missing in the system/ system/app and system/priv-app folder(s) once you determine what is missing then just bring those changes over to your folders
Click to expand...
Click to collapse
My camera works on SM-G928W8

Dread2000 said:
so i flashed the ROM. very stable i can say, but unfortunately the camera still does not work. i was able to install google camera mod via adb but still the same problem. it does not crash tho. it's just not starting
Click to expand...
Click to collapse
Let me try n rebuild it real quick for your device, its the same phone mine is just zenltecan not zenlte

Its uploading now, I used the same zip from my phone and changed the updater script to zenlte

OK its done, I named it v2, same link as first post

@godkingofcanada Hi, I've got same problem with this rom as I had with Oreo rom before. My WiFi MAC Address is 02:00:00:00:00:00 and it doesn't turn on. Have I to do something more than installing rom and all fixes with it ? I can provide logcat if it would do. Also after clean installation there was no bootanimation and no wallpaper. Just black screen and that's all. Hope to see quick reply. Cheers

aerzjee said:
@godkingofcanada Hi, I've got same problem with this rom as I had with Oreo rom before. My WiFi MAC Address is 02:00:00:00:00:00 and it doesn't turn on. Have I to do something more than installing rom and all fixes with it ? I can provide logcat if it would do. Also after clean installation there was no bootanimation and no wallpaper. Just black screen and that's all. Hope to see quick reply. Cheers
Click to expand...
Click to collapse
What variant of s6e+ do you have? And sure let me peek at the logcat, I have never had it boot to black screen, normally the boot only fails if you did not flash the boot.img. the pie kl500.zip fixes the Wi-Fi, the other zip disables NFC, did you flash both ?

godkingofcanada said:
What variant of s6e+ do you have? And sure let me peek at the logcat, I have never had it boot to black screen, normally the boot only fails if you did not flash the boot.img
Click to expand...
Click to collapse
I did everything from first post apart from installing gapps. Let me grab it, and I will upload here. Thanks for fast reply

aerzjee said:
I did everything from first post apart from installing gapps. Let me grab it, and I will upload here. Thanks for fast reply
Click to expand...
Click to collapse
You are welcome. Also, what country is your phone manufactured in?

godkingofcanada said:
You are welcome. Also, what country is your phone manufactured in?
Click to expand...
Click to collapse
It's G928F variant, I don't have phone box with me, so can't check on it. I bought it here in Poland.

godkingofcanada said:
What variant of s6e+ do you have? And sure let me peek at the logcat, I have never had it boot to black screen, normally the boot only fails if you did not flash the boot.img. the pie kl500.zip fixes the Wi-Fi, the other zip disables NFC, did you flash both ?
Click to expand...
Click to collapse
Logcat took via built-in SysLog app. Hope there's something

aerzjee said:
It's G928F variant, I don't have phone box with me, so can't check on it. I bought it here in Poland.
Click to expand...
Click to collapse
Give me a moment to look, you have the international variant but I don't think there's any hardware differences. I need to verify

godkingofcanada said:
Give me a moment to look, you have the international variant but I don't think there's any hardware differences. I need to verify
Click to expand...
Click to collapse
Also, the phone is identifying itself as SM-N920X is settings, same this was happening with Oreo ROMs. I'll keep this page refreshed once in a while, I hope that you will find something. I've updated bootloader, but I'm not sure if it changes something. Thanks for fast replies

[ROM][9.0][N935F]Project Pixel 1.0[27/7/19]

Project Pixel P 1.0​
What is Project Pixel?​
Project Pixel is a small team of developers that work on porting most, if not all of the Google Pixel features to stock firmwares.
We mostly specialize in Stock Samsung Firmwares, although we may do work on ports of OneUI once in a while. Our objective is to deliver the best performance by using stock firmware whilst also improving upon it by debloating and tweaking whilst also giving you all the features of a Pixel device.
Pixel Pie 1.0 Feature List:​1. AdAway
2. Deep Debloat and DeKnoxed (Apps, permissions, framework, unnecessary features-stripped and removed)
3. Dolby Atmos with Correct Tuning and Gain (Main Speaker has most power and Earpiece just adds detail and treble)
4. Eleven Music (Lineage OS 15.1)
5. Files GO (File Manager)
6. GCam (Note: GCam might not work on all devices, because of hardware compatibility) v6.3
7. Google Calculator
8. Google Calendar
9. Google Chrome
10. Google Clock
11. Google Contacts
12. Google Keep (With Handwriting Libs)
13. Google Lens (Works within Google Photos and Recents in Pixel Launcher)
14. Google Messages
15. GPay (Working Payment Method along with NFC functionality)
16. Google Phone
17. Google Pie Emojis (Not Samsung Ones)
18. Google Play Games
19. Google Tasks
20. GBoard
21. Mtweaks (Has Hardware Control - Similar to Kernel Adiutor but more tailored to Exynos)
22. Pixel Fonts
23. Pixel 3 Boot Animation
24. Pixel 3 Live Wallpapers with Normal Wallpapers
25. Pixel Google Photos (Free Original Quality Storage)
26. Pixel Module V1 - Pixel Animations, framework and configs.
27. Pixel Launcher with new recent menu
28. Pixel Sounds
29. Samsung Digital Wellbeing
30. Samsung App Lock
31. Samsung Gallery (Stripped Down and lightened to improve performance)
32. Samsung's Stock Camera with HDR parameter changes, debloated and additional video modes (4k30 at HDR- Not Fully Tested)
33. SystemUI Tuner (Provides battery stats along with other useful customiztions - Check QS icons and add it to QS Panel to view)
34. VoLTE Supported
35. YouTube Vanced (Ad-free Youtube)​
CHANGELOG 1.0
Initial Release
Bugs:
ROM will not boot without Magisk.
Notes:
1. To view Battery Stats and Storage, pull down the Quick Settings Panel and on the top right click the three bubbles button and then Button Order. Then move the new Battery and Storage icon to the Quick Settings.
2. Make sure you set Google Phone as your default phone app. Go-to Settings/Apps. Click the three dots in the top right corner. Then click default apps. Then Calling App and select Phone.
3. After first boot, reboot your device once to ensure dalvik optimization.
INSTALL INSTRUCTIONS:
1. Download the zip and the latest Magisk.
2. Wipe System, Data, Dalvik Cache and Cache
3. Flash the zip and then flash Magisk.
Download Link and Sources:
Feel free to join us telegram via the group: https://t.me/joinchat/G-BflEMjGlgp1NeWxDA2bA
Download Link 1.0 :https://drive.google.com/file/d/14j_RVzN2ZmJuxeZElwsMmtkbCuZB5z8V/view
Magisk:https://github.com/topjohnwu/Magisk/releases
Kernel Source: source.samsung.com
Credits:
Google for Android and Framework
Samsung For Their Kernel
Check the screenshots tab to see screenshots of the ROM in action.
XDA:DevDB Information
Project Pixel P, ROM for the Samsung Galaxy Note FE
Contributors
Visera, Skulldron
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Bootloader & Modem
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2019-07-27
Created 2019-07-27
Last Updated 2019-07-26

Reserved
Hey guys, some things:
1) Read the first post if you don't know how to fix the dialer problem. I get this a lot.
2) This is the new version of Team Pixel, so the old thread will re-start here.
3) The rom currently doesn't boot when you don't flash Magisk. It's something with the stock rom, so flash Magisk after you flash the rom.

Looks good among the two other ROMs for Note FE which I see many people complain about them!
Can anybody confirm if from experience it's better than stock or not?

Is it same as the previous PIXEL PIE-1 or new update?

fahad0000 said:
Is it same as the previous PIXEL PIE-1 or new update?
Click to expand...
Click to collapse
New

Some feedbacks for this rom are Screen Off Memo and write on screen features are not working. Beside that everything is fantastic. This rom gives me the most stable mobile network and signal amongst the others and I didn't have to reset and manually set my network in order to receive and make calls like other roms, they all shared the same problem from stock to custom except this one

which gcam 6.3 version works with Note FE exynos pie?
I thought only gcam 5.1 is stable, 6.1 and 6.2 are full of bugs/crash

I'm having problems figuring out how to get root access on this ROM.
- I've unlocked Developer options (there seems to be nothing in there).
- I've installed SuperSU from the App store. It doesn't see root.
- I've tried the root method from the base installer; installing the TWRP Hack from Download mode. No luck.
- I've tried installing SuperSU from TWRP. That causes the system to boot loop.
- I've tried updating Magisk. That causes the system to boot loop.
I feel like there is something super simple I am missing.

Hello. Is this tested on bootloader v5?

viper001 said:
Hello. Is this tested on bootloader v5?
Click to expand...
Click to collapse
I'm using the bootloader from this thread:
https://forum.xda-developers.com/note-fe/how-to/sm-n935f-ds-how-to-flash-twrp-root-t3733030
I can confirm that works. That one is Bootloader v5.
I should state that the only version of Magisk that works from what I've found is the one in this thread. Newer versions cause bootloops.

LighthammerX said:
I'm having problems figuring out how to get root access on this ROM.
- I've unlocked Developer options (there seems to be nothing in there).
- I've installed SuperSU from the App store. It doesn't see root.
- I've tried the root method from the base installer; installing the TWRP Hack from Download mode. No luck.
- I've tried installing SuperSU from TWRP. That causes the system to boot loop.
- I've tried updating Magisk. That causes the system to boot loop.
I feel like there is something super simple I am missing.
Click to expand...
Click to collapse
You flash Magisk? SuperSU doesn't work anymore afaik.

viper001 said:
Hello. Is this tested on bootloader v5?
Click to expand...
Click to collapse
Skulldron said:
You flash Magisk? SuperSU doesn't work anymore afaik.
Click to expand...
Click to collapse
I actually planned on getting back to this. Thanks for the followup.
The resolution was this:
- I flashed the Magisk link in this thread and then the most current Magisk app.
This was seemingly the problem but I don't exactly know why.
The fix was to make sure I had the most current Magisk app and Magisk flashed.

Rom is buttery smooth even without Magisk. (used the TWRP patch by RicePlay after installing the rom then it started to boot afterward).
Here's a couple of snapshots:
What I did to install this was:
1) Download the ROM image and the TWRP patch
2) Format/clear system, data, cache, etc..
3) Install ROM image
4) Wipe dalvik
5) Install TWRP patch
6) Wipe Dalvik
7) Reboot to System
Optional step for root access:
8) Install Magisk Canary (debug)
I'm not sure if anyone else has experienced this but we cannot disable the core-only mode once Magisk 19.3 is installed. I even tried toggling off the core only mode via Magisk Manager module via TWRP Terminal yet to no avail after a restart.

Bình said:
Some feedbacks for this rom are Screen Off Memo and write on screen features are not working. Beside that everything is fantastic. This rom gives me the most stable mobile network and signal amongst the others and I didn't have to reset and manually set my network in order to receive and make calls like other roms, they all shared the same problem from stock to custom except this one
Click to expand...
Click to collapse
Install Samsung Notes and you'll be good.

Logcat for bugged Magisk core only mode
I have sent a logcat to the Magisk Canary Debug thread and the latest build(19.4-f383d11d) did not fix the core only mode issue. Kindly refer to this post on the thread for the logcat. I hope a fix can be done on it but other than that, this is a great custom rom

How's the CSC selection or setup on this rom? Been wanting to use my NoteFE for awhile (wanted stock) but can't get my sim settings to stay after reboot (aka just reboots into twrp and doesn't complete) so figured I'd try custom rom

Ok so CSC stuff I answered on my own.
Was curious if anyone having trouble with the CTS profile showing false under the securitynet check? ( Aka want to know if I'm wasting my time trying to figure out how to fix it)

Thank Visera,
"]https://i.imgur.com/FBKKg4h.jpg[/IMG]
"]https://i.imgur.com/oz59lbF.jpg[/IMG]
"]https://i.imgur.com/oU9ZGun.jpg[/IMG]
Hơi thất vọng về Rom. Bản rom này chỉ là một bản SamsungRom được tùy chỉnh lại. Tôi cứ cho rằng là GoogleRom tùy chỉnh lại. Tôi dùng trải nghiệm thì thấy nó chỉ có Launcher giống Google.
A little disappointed about Rom. This rom is just a customized SamsungRom version. I keep claiming that GoogleRom customizes. I used the experience and found it only has Launcher like Google.
:good::good::good::good::good::good:

Is it a bug? Even If I full wiped, I can't get the google login screen at the first boot so that I can't recover my back up data.

cannot place regular voice calls, and theres no incoming call answer or reject menu, the phone just ringing.
is something wrong with the dialer? or just me.

[ROM][PORT][R] Pixel 4XL RPP2 - Developer Preview 2.1[02-04-20][EOL]

Pixel 4 XL Firmware for OnePlus 6T!
Another ROM made by Jay's Dev Team! Huge Thanks to @MounirHero for maintaining it! No more abandoned support, more frequent updates and tested builds!
This thread will be mostly updated by MounirHero (Matrix).
Features:
Stock Pixel 4XL Hybrid RPP2 Firmware / April Security Patch
Stock Pixel 4XL QQ1B Firmware / February Security Patch
Debloated
Pixelified Vendor
All Pixel 4XL features
Pixel Themes
Pixel Always-On-Display
GCam 7 Support
GCam Playground Support
Debloated
Modded vendor for "Pixel Smoothness"
Prebuilt TWRP​
What works:
Almost everything, check bugs!
What doesn't work / Bugs:
-Set preferred USB mode in Developer Options.
-No Fingerprint On Display support.
-Encryption
How to Install:
Make sure You're on H2OS Q or OOS OBQ with unlocked bootloader.
Notes: Backup Your nudes before flashing the rom! Use the Dirty Flasher at your own risk.
On Phone
0. Flash OOS 10/H2OS 10/DP3 Q (any stock Q ROM)
1. Reboot to fastboot
2. Unlock bootloader
3. Boot Device
4. Reboot to fastboot
5. Flash TWRP
6. Make sure you're on slot A
7. Flash EPR 2 for your device (LINK)
8. Reboot to fastboot
9. Connect phone to PC.
On PC
1. Unpack Developer Preview 2.1 zip
2. Double Click Clean Flasher .bat/sh (it could take 5-10 minutes to flash)
3. Phone will boot automatically in Pixel 4XL Firmware.​
DOWNLOAD
[/B]
Check screenshots in attached images!
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join our group!
Jay's Dev Team:
Jay - Main Developer - Donate to Jay
MounirHero - OnePlus 6T Maintainer & Tester - Donate to Mounir
Credits:
MounirHero for maintaining and testing
ProtoDeVNan0 for base OP6 Port
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
​
XDA:DevDB Information
[ROM][PORT][R] Pixel 4XL RPP2 - Developer Preview 2.1[02-04-20], ROM for the OnePlus 6T
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS - Android 10
Based On: Pixel
Version Information
Status: Beta
Created 2019-10-11
Last Updated 2020-05-24

Reserved

Pixel port looks tempting, haven't tried any Q yet. Will flash this once back home!! Thanks for the port.

where is fixes.zip? Its not inside ROM archive in the given link.

these seems so.exciting

I flashed it and works well. No fixes.zip inside, but works. Play store works, but some pixel apps try and fail to update.
The only bugs are FP, display rotation and max brightness in auto brightness (you can force it manually). Calls, data mobile, wifi, bluetooth and nfc working. Camera working also with https://f.celsoazevedo.com/file/cfiles/gcm1/Gcam_6.2.030_Advanced_BF_V2.2.1.190822.1145.apk
System is smooth, and audio working well also. Very good rom.
Thanks for your hard work

Screen shot

Battery duration good also

No time to send log sorry but only 2 issues : something liké bluetooth system keep crashing (twice, have to reboot) and no acces to flie with USB. Also auto display mode as said in OP ..

stefr07 said:
No time to send log sorry but only 2 issues : something liké bluetooth system keep crashing (twice, have to reboot) and no acces to flie with USB. Also auto display mode as said in OP ..
Click to expand...
Click to collapse
Edit : USB is OK, my side. No more error with blutooth also

perisman said:
I flashed it and works well. No fixes.zip inside, but works. Play store works, but some pixel apps try and fail to update.
The only bugs are FP, display rotation and max brightness in auto brightness (you can force it manually). Calls, data mobile, wifi, bluetooth and nfc working. Camera working also with https://f.celsoazevedo.com/file/cfiles/gcm1/Gcam_6.2.030_Advanced_BF_V2.2.1.190822.1145.apk
System is smooth, and audio working well also. Very good rom.
Thanks for your hard work
Click to expand...
Click to collapse
I'm not able to update anything on Play Store at all. Also looking for file fixes.zip.
Anyway thanks for your hard work

Also looking for the fixes zip and also in addition to not being able to install certain pixel apps, I cant install other apps in the app store as well like Instagram.

Seems not many of us tried this ROM.

arfaie said:
Seems not many of us tried this ROM.
Click to expand...
Click to collapse
Tried... but due to brightness issue nd several apps not getting downloaded had to roll back....it's a great port though

Would be more interesting with a Pixel 4 port but lets see what stock OOS will bring first

sanjeev7 said:
Tried... but due to brightness issue nd several apps not getting downloaded had to roll back....it's a great port though
Click to expand...
Click to collapse
Agreed, i dont mind key in the pin to unlock instead of fingerprint, but for the brightness, its necessary for me because i always using the phone outdoor.
Anyway, its really a great port. Seriously.

New Update
PIXEL 4XL FIRMWARE PORTED.

Flashed rom,and works well. For now I find that brightness is a max level always, and ringtones, notifications sounds and alarm sound dont work. Multimedia, and audio calls are working. Play store works well. I test it more time and tell more

perisman said:
Flashed rom,and works well. For now I find that brightness is a max level always, and ringtones, notifications sounds and alarm sound dont work. Multimedia, and audio calls are working. Play store works well. I test it more time and tell more
Click to expand...
Click to collapse
I had the same issues. Max brightness constant and random clicking sounds from the speakers. No notification sounds and system sounds would randomly stop working. If these issues get fixed looking like a very good port ?

Very cool! Let's squash those few bugs and make this legendary. Thanks man!

Android 11 one ui 3.0 rom needed

I need android 11 one ui 3.0 rom for j7 prime...

Sorry buddy, that's not how things works, you can try build it by yourself and see why it isn't available yet.
Demanding will not help you.
I hope you can understand, I not meant to be rude.

I got you
Download android 11 - https://drive.google.com/drive/mobile/folders/1BvmdPnabFvUh3z9z-lBhmTcqr68p1IGn
Then after first boot then reboot to recovery and flash tke kernal given note this kernel is only for j7 prime (on7xelte)
Tips for more stablity
1. Disable live wallpaper
2. Down scale display resolution to 720p in the settings>display
3. Dont use chrome use brave instead
At the end i will tell you all the files are not created by me
The rom is created by asatro (spelling mistake )
The kernel is extracted from h vendor (link - https://forum.xda-developers.com/t/treble-10-0-arm64-h-vendor-v1-0.4116287/ )

SanketDon said:
I got you
Download android 11 - https://drive.google.com/drive/mobile/folders/1BvmdPnabFvUh3z9z-lBhmTcqr68p1IGn
Then after first boot then reboot to recovery and flash tke kernal given note this kernel is only for j7 prime (on7xelte)
Tips for more stablity
1. Disable live wallpaper
2. Down scale display resolution to 720p in the settings>display
3. Dont use chrome use brave instead
At the end i will tell you all the files are not created by me
The rom is created by asatro (spelling mistake )
The kernel is extracted from h vendor (link - https://forum.xda-developers.com/t/treble-10-0-arm64-h-vendor-v1-0.4116287/ )
Click to expand...
Click to collapse
Note that camera is not working rightnow.
And also note that this rom will be 99% more stable after flashing the kernel i given you.

I am waiting for one ui 3.0 android 11 rom

SanketDon said:
Note that camera is not working rightnow.
And also note that this rom will be 99% more stable after flashing the kernel i given you.
Click to expand...
Click to collapse
do have a random reboot?

have the random reset?

thanhphat95 said:
do have a random reboot?
Click to expand...
Click to collapse
you tested? if yes, it have the random reboot?

I have installed this rom. The first ever Android 11 rom comes with VOLTE. Superb effort by the developers. Installed 1 hr ago as of now no issues. Only one error appear regarding storage contact administrator. Rest all the working as of now. Gone through above mentioned steps for the mentioned issues. It is working as expected. Installed on Samsung J7 Prime G10F

Bugs:
1. Camera is not working even after install the third party apps. Due to this payment scanner won't work
2. Any settings change reboot the system
3. Auto rotate of phone causing reboot the system
4. Any apps downloaded through telegram fails to install throws 'android/vnd installation archive package' bug
5. Slow charging
6. Batter drains faster compared to others

SanketDon said:
Note that camera is not working rightnow.
And also note that this rom will be 99% more stable after flashing the kernel i given you.
Click to expand...
Click to collapse
why camera not works??? please reply me

J7 prime one ui 3.1 A51 5G (stabil)
Google Drive - Virus scan warning
drive.google.com