Database Develop

Help Rooting my Samsung Galaxy S GT~I9000T!

Hi guys! I can't root my Galaxy S. I've downloaded many ''update.zip'' files, but. in the download mode, when I hit ''apply update''after some weird phrases appear it says ''failed to update''
I think it's because I have the GT-I9000T, and I've found files for the european version.
Any idea? Am I doing something wrong? I'm from.El Salvador,.please someone help me!
Sent from my GT-I9000T using XDA App

hmm. the easiest way for you to do it would be to root using Chainfire's method found in this thread:
http://forum.xda-developers.com/showthread.php?t=788108
READ ALL THE INSTRUCTIONS CAREFULLY.

Isnt z4 root more simple? It is a free app found on the market
Sent from my GT-I9000 using XDA App

z4 root never did worked for me. tried it just once though. speedmod's root via cwm or CF Root are the ones that worked for me without any miss whatsoever.

My situation
Hello guys.
I am from Costa Rica, I do have the same cel phone version you have.
I tried z4root to temporary root my android, then I proceed to install OCLF 2.0 to remove the lag, but after I restarted the android it didn't come back again.
I was able to turn it on but it were stuck after the samsung introduction video.
Just a black screen and no way to do anything.
I tried to press UP, HOME and POWER to get into the recovery mode but it didn't work, so I almost had a brick.
Lookin over the internet I found a small .bat file that I ran with the android connected using the usb cable and I was able to run the factory reset.
Finally I think I got my cel to normal, but I dont know if there are still a few "orphan files" because of the z4root and oclf 2.0.
I am sharing this experience with you just to let know what may happen with our model, I think most of the apps are made for Europe and North America, we may have a small differences on our phones because not everything is compatible.

Bueno, creo que no se puede hacer root a nuestros telefonos por ser de agencia, yo lo tengo con Claro y al parecer no se podra, y vos, que compañía tenés??

Hello, actually I got it in a store, the company in Costa Rica for telephones and communication is called ICE, but they haven't approved the cel phone to work here yet so I did configure it myself.
I think actually my phone comes from UK since all the software was showing UKs config.
Lo compre en una tienda aqui en Costa Rica, pero el telefono aun no esta homologado por el ICE, que es la compania de telecomunicaciones aqui.
Pero el telefono venia de europa creo, ya que todo venia configurado como si fuera del Reino Unido.

Mmm, creo que vos tenes mas chance de poder rootearlo, porque yo lo compré aquí en El Salvador pero el telefono es modelo GT-I900T que es la version para latinoamerica. Y por ahora no quiero flashear ninguna ROM, esperaré a que se acabe la garantía antes de trastear el cel.

Si correcto, de igual manera voy a esperarme 6 meses a que se le acabe la garantia para poder actualizarlo a Froyo 2.2.
Saludos

http://www.taringa.net/posts/celula...Galaxy--GT-I9000T-a-Froyo-2_2_1-via-Kies.html
lee eso te va a encantar

freddy_rv said:
Hello guys.
I am from Costa Rica, I do have the same cel phone version you have.
I tried z4root to temporary root my android, then I proceed to install OCLF 2.0 to remove the lag, but after I restarted the android it didn't come back again.
I was able to turn it on but it were stuck after the samsung introduction video.
Just a black screen and no way to do anything.
I tried to press UP, HOME and POWER to get into the recovery mode but it didn't work, so I almost had a brick.
Lookin over the internet I found a small .bat file that I ran with the android connected using the usb cable and I was able to run the factory reset.
Finally I think I got my cel to normal, but I dont know if there are still a few "orphan files" because of the z4root and oclf 2.0.
I am sharing this experience with you just to let know what may happen with our model, I think most of the apps are made for Europe and North America, we may have a small differences on our phones because not everything is compatible.
Click to expand...
Click to collapse
i have the exact same problem is stuck at "S" screen and i can't enter recovery or download mode ,so were i can find that .bat file u are talking about?

[ROM] Android Nougat 7.0 - EMUI 5.0 - VIE-L09C432B360 - 03/03/2017

¡Por fin! Hoy se ha publicado la OTA Oficial con Android Nougat 7.0 y EMUI 5.0 para el Huawei P9 Plus. Pesa 2,39 GB. Se trata de la versión europea incluyendo, por supuesto el español (CUST 432). No necesitas ser root. Hay dos formas de instalar:
1ª OPCIÓN: La más sencilla. Si dispones de la versión B180, B181 ó B182 sigue estos pasos para que se instale sin fallos (yo he intentado sin resetear colocando el update en la carpeta dload de la memoria interna o la tarjeta SD y me da fallos):
A.- Resetear de fábrica buscando en el teléfono (Ajustes avanzados) la opción correspondiente (ojo que esto borra todos los datos, fotos, música...etc)
B.- Asegurate de tener cargado el smarphone algo más de un 60%
C.- Inicia normalmente pero sólo introduce la zona (España), idioma y contraseña wifi para que el teléfono detecte automáticamente y se disponga a actualizar a la nueva versión. No es necesario que introduzcas otros datos, como tu usuario de google o id de huawei (lo harás después una vez concluida la actualización. Una vez concluido el arranque normal el sistema te solicitará apruebes la actualización y comenzará esta.
D.- Como llevará un rato, si quieres -no es imprescindible- puedes activar mientras las opciones de desarrollador que te servirá después para ver el teléfono desde el PC y trabajar con sus carpetas. Supongo que sabes como se hace, de lo contrario busca información en este foro porque te lo explican perfectamente.
E.- El teléfono se reiniciará y tendrás lista la versión con Android Nougat 7.0 y EMUI 5.0
2ª OPCIÓN: Usando el método mencionado más arriba, que detallado es el siguiente:
A.- Descarga la ROM desde este enlace -->ROM<--
B.- Descomprime posteriormente
C.- Crea desde el PC una carpeta en la memoria interna, o en la tarjeta SD, llamada dload , introduce en ella el UPDATE.APP (no es necesario hacer lo mismo con el resto de archivos que contiene el zip, pero el cualquier caso esto no va a cambiar nada ni te va a crear problema alguno)
D.- Apaga el terminal
E.- Apagado, pulsa a la vez y manten pulsado hasta que te aparezca en pantalla el actualizador de EMUI, las teclas volumen +, volumen - y encendido.
F.- Espera hasta que concluya la actualización
En cualquier caso creo que debes resetear para que no te de fallos de actualización. A mi me los da, pero eso no invalida ni crea problemas en el terminal con lo que puedes probar una y otra vez (eso sí, por si acaso, no me hagas responsable si algo falla)
Según las propias instrucciones del actualizador de Huawei, el proceso de reinicio después de instalada la ROM tarda más de lo normal (puede que unos diez minutos), así que tranquilo. Al final todo funciona a la perfección.

Google translate:
At last! Today the Official OTA with Android Nougat 7.0 and EMUI 5.0 has been released for the Huawei P9 Plus. It has a weight of 2.39 GB. This is the European version including, of course the Spanish (CUST 432). You do not need to be root. There are two ways to install:
1st OPTION: The simplest. If you have version B180, B181 or B182 follow these steps to install without fail (I have tried without resetting by placing the update in the dload folder of the internal memory or SD card and gives me failures):
A.- Factory reset looking in the phone (Advanced settings) the corresponding option (eye that this erases all the data, photos, music ... etc)
B.- Make sure you have loaded the smarphone slightly more than 60%
C.- Starts normally but only enters the zone (Spain), language and password wifi so that the phone detects automatically and is prepared to update to the new version. You do not need to enter other data, such as your google user or huawei id (you will do it after the update is finished.) Once the normal bootup is completed, the system will prompt you to approve the update and start the update.
D.- As it will take a while, if you want - not essential - you can activate while the developer options that will serve you later to view the phone from the PC and work with your folders. I guess you know how it is done, otherwise find information in this forum because they explain perfectly.
E.- The phone will reboot and you will have ready the version with Android Nougat 7.0 and EMUI 5.0
2nd OPTION: Using the method mentioned above, which is detailed as follows:
A.- Download the ROM from this link -> ROM <-
B.- Later decompresses
C.- Create from the PC a folder in the internal memory, or in the SD card, called dload, it inserts in it the UPDATE.APP (it is not necessary to do the same with the rest of files that contains the zip, but any If this is not going to change anything or create any problem)
D.- Turn off the terminal
E.- Off, press and hold until the EMUI updater, volume +, volume - and power keys appear on the display.
F.- Wait until the update completes
In any case I think you should reset so that you do not have upgrade bugs. To me it gives them to me, but that does not invalidate or create problems in the terminal with which you can try again and again (yes, just in case, do not hold me responsible if something fails)
According to Huawei's own updater instructions, the reboot process after the ROM is installed takes longer than normal (maybe ten minutes), so quiet. In the end everything works perfectly.

Hi guys.
Thanks a lot
But there is no "UPDATE.APP" in the zip ....

Snipper-Ice said:
Hi guys.
Thanks a lot
But there is no "UPDATE.APP" in the zip ....
Click to expand...
Click to collapse
FOLLOW MY INSTRUCTIONS
I already posted those instructions on another thread.
- Make sure that you're on VIE-L09C432B181
- Make sure that you have more than 60% battery
- Now make a backup from your PC with HiSuite
- Now install Firmware Finder from Play Store (link)
- Now go to the Settings -> Advanced settings ->Security -> Device administration ->> NOW activate "Unknown sources"
- Now open Firmware Finder and select your model (ex: VIE-L09C432)
- Now click on "GET FIRMWARE LIST"
- Now go to the Settings of Firmware Finder & activate "Installation via system update"
- You will see a pop up "Huawei Firmware Finder Proxy" click "DOWNLOAD ADDON"
- When download is finished, install in on your mobile & open it
- Re open settings of Firmware finder & check if "Installation via system update" activated, if not activate it for the 2nd time
-- Now on Firmware Finder and select your model as VIE-L09C432 (only if your model is this)
- Now click on "GET FIRMWARE LIST" & select first one where you see "VIE-L09C432B360" date:03.03.2017 TypeTA Size:1.334GB
- When you selected "VIE-L09C432B360" now you'll see an option "SEND FIRMWARE TO UPDATER" click on it
- Now it will automatically open a page "Firmware Finder Proxy"
- Now go to the Wi-Fi & connect to one Wi-Fi and now "Modify network" then "Show advanced options" now select "Proxy" as "Manuel"
- On write on Proxy hostname: localhost
- On write on Proxy port: 8080
- Now go to Settings -> System update & now click on "CHECK FOR UPDATES"
- Now you'll gonna see an update name "VIE-L09C432B360VIE-L09C432B360 -1430186368,00 B" don't download this one ! this one is not the correct one !
- Back to System update & you'll still this the wrong update, don't worry, click on "MENU" & click on "Download latest full package"
- Now you'll see the correct update "VIE-L09C432B360 2,39 GB" now just click on "Quick update"
- It will not download, don't worry, just go to the Wi-Fi settings and disable "Proxy"
- Go again to System update and click on pause & resume
- Wait till the end of the download & after your mobile will install automatically the update you downloaded
If you followed my instructions, it will install successfully B360.

gamingprod02 said:
FOLLOW MY INSTRUCTIONS
I already posted those instructions on another thread.
- Make sure that you're on VIE-L09C432B181
- Make sure that you have more than 60% battery
- Now make a backup from your PC with HiSuite
- Now install Firmware Finder from Play Store (link)
- Now go to the Settings -> Advanced settings ->Security -> Device administration ->> NOW activate "Unknown sources"
- Now open Firmware Finder and select your model (ex: VIE-L09C432)
- Now click on "GET FIRMWARE LIST"
- Now go to the Settings of Firmware Finder & activate "Installation via system update"
- You will see a pop up "Huawei Firmware Finder Proxy" click "DOWNLOAD ADDON"
- When download is finished, install in on your mobile & open it
- Re open settings of Firmware finder & check if "Installation via system update" activated, if not activate it for the 2nd time
-- Now on Firmware Finder and select your model as VIE-L09C432 (only if your model is this)
- Now click on "GET FIRMWARE LIST" & select first one where you see "VIE-L09C432B360" date:03.03.2017 TypeTA Size:1.334GB
- When you selected "VIE-L09C432B360" now you'll see an option "SEND FIRMWARE TO UPDATER" click on it
- Now it will automatically open a page "Firmware Finder Proxy"
- Now go to the Wi-Fi & connect to one Wi-Fi and now "Modify network" then "Show advanced options" now select "Proxy" as "Manuel"
- On write on Proxy hostname: localhost
- On write on Proxy port: 8080
- Now go to Settings -> System update & now click on "CHECK FOR UPDATES"
- Now you'll gonna see an update name "VIE-L09C432B360VIE-L09C432B360 -1430186368,00 B" don't download this one ! this one is not the correct one !
- Back to System update & you'll still this the wrong update, don't worry, click on "MENU" & click on "Download latest full package"
- Now you'll see the correct update "VIE-L09C432B360 2,39 GB" now just click on "Quick update"
- It will not download, don't worry, just go to the Wi-Fi settings and disable "Proxy"
- Go again to System update and click on pause & resume
- Wait till the end of the download & after your mobile will install automatically the update you downloaded
If you followed my instructions, it will install successfully B360.
Click to expand...
Click to collapse
I took gamingprod's excellent guide and formatted it into a numbered list per the attached picture. I found it a tad easier to follow in this format.
-Paul
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

cmexec said:
I took gamingprod's excellent guide and formatted it into a numbered list per the attached picture. I found it a tad easier to follow in this format.
-Paul
Click to expand...
Click to collapse
Thanks mate i did all the instructions to follow when i was in class ? so i didn't had much time to make it like how you did.. just like i said before i posted those instructions before but i was not so precise like my latest instructions, so many people didn't understand it so i did the v2 of my instructions with more clearity to follow them. Thanks again for your work.

gamingprod02 said:
Thanks mate i did all the instructions to follow when i was in class ? so i didn't had much time to make it like how you did.. just like i said before i posted those instructions before but i was not so precise like my latest instructions, so many people didn't understand it so i did the v2 of my instructions with more clearity to follow them. Thanks again for your work.
Click to expand...
Click to collapse
I found the guide on Mate 9 and P9 a long time ago so it's not a new guide. It's taken from that forum.
Sent from my VIE-L29 using XDA Labs

Mostar088 said:
I found the guide on Mate 9 and P9 a long time ago so it's not a new guide. It's taken from that forum.
Click to expand...
Click to collapse
Not at all mate, i didn't take your instructions.. i found this instructions by myself when i tried to update to B360 my P9 Plus, when i found it i did shared with all of you. i did shared my 1st guid without so many explanations after you shared your one but many guys still didn't understand our guids so i had to make a v2 version with better explanation, clarity. That's what i did... once again i didn't took any guids from a forum you're pretending or from another forum. if i took you're guid or someone else guid i will wrote founders name but i didn't wrote bcz i mad this guid by myself.

gamingprod02 said:
Not at all mate, i didn't take your instructions.. i found this instructions by myself when i tried to update to B360 my P9 Plus, when i found it i did shared with all of you. i did shared my 1st guid without so many explanations after you shared your one but many guys still didn't understand our guids so i had to make a v2 version with better explanation, clarity. That's what i did... once again i didn't took any guids from a forum you're pretending or from another forum. if i took you're guid or someone else guid i will wrote founders name but i didn't wrote bcz i mad this guid by myself.
Click to expand...
Click to collapse
I do not accuse u for stealing my or any others guide.
Im just telling that this guide has been on the forum for a while.
If u found out this by your self thumbs up for u.
It is good that people share there guides to help others so nothing wrong with that.
I just wonted to point out that there is guides for this.
And yes people get confused by some guides and do not understand them, no guide is perfect for everyone.
I did my guide when i wanted to flash Nougat to L29C636, so i found a way to do it for P9 and tested it on my P9+ and it worked, so i wanted to share it with others to help since the forum for P9+ is much smaller then forum on P9.
Sent from my VIE-L29 using XDA Labs

Successful Upgrade from L29C636B202 to L29C636B362
I was able to successfully upgrade to Nougat using the guideline in this thread. The upgrade was flawless, even though I was rooted and running TWRP 3.0.2. All my data is intact and I encountered no force closures or failed apps. The entire update (from FF download to first Nougat boot) took approximately 20 minutes.
-Paul

gamingprod02 said:
Thanks mate i did all the instructions to follow when i was in class so i didn't had much time to make it like how you did.. just like i said before i posted those instructions before but i was not so precise like my latest instructions, so many people didn't understand it so i did the v2 of my instructions with more clearity to follow them. Thanks again for your work.
Click to expand...
Click to collapse
Hey, I follow this guide but I don't have no them no bluetooth and many another functions should I repeat the steps by rolling back again to B181 and retry ?

Amazon X4 will not OTA, can I sideload to Pie?

I bought an ebay special really cheap x4 and it turns out it is the Amazon version. To make matters even worse; the phone is hungup on a security update it keeps trying but it will not complete. Besides that, the phone is fine.
I would like to update it to the newest version of the Amazon firmware manually, flashing it, if that is possible somehow? I downloaded the firmware from the Motorola Android Team site, now I just need to know how to do it, is it possible to sideload to Pie? The current version it has is Oreo 8.1
Build number OPW28.3
Motorola Version
OPW28.46-21
My phone will download a security update via OTA, but is never able to finish updating it, and so never gets to OTA Pie.

saludos usa este programa Lenovo Moto Smart Assistant es oficial y te lo actualiza a la ultima version de firmware existente para el modelo motorola que tengas

jesusno said:
saludos usa este programa Lenovo Moto Smart Assistant es oficial y te lo actualiza a la ultima version de firmware existente para el modelo motorola que tengas
Click to expand...
Click to collapse
Thank you that is very helpful! I have installed it to my PC and I am downloading the update, which is PPWS29.69-39-6-1
Is it possible to backup the entire phone including the ROM with this application before updating, in case of any problems? I hope it works alright after the update!
I do see this app has "rescue mode", maybe that is all I would need if it goes bad?
Thanks again! Really nice app to upgrade the phone "lenovo smart assistant " to flash the latest update to my Motorola X4!

jesusno said:
saludos usa este programa Lenovo Moto Smart Assistant es oficial y te lo actualiza a la ultima version de firmware existente para el modelo motorola que tengas
Click to expand...
Click to collapse
Darn it failed! Something wrong with this phone but it works just unable to update
motorola smart assitant "failed to clean up factory mode"

I wonder about this "factory mode" on the phone, and could that be useful?

Thank you, this worked! It was saying it failed but putting it in factory mode it finished the install after i unplugged it Wild

global rom ??????

alguien sabe donde puedo conseguir la rom global ?

x.genady.x said:
alguien sabe donde puedo conseguir la rom global ?
Click to expand...
Click to collapse
Te refieres a la que instalan en la tienda de AliExpress???, pidele el link de descarga al vendedor, deberia poder dartelo.
Ask your seller for instruction on how to install it.
I don't recommend you the fake global ROM, mine came with that global ROM installed, but battery, notifications and performance were terrible.
After 1 week I installed Havoc 2.7, awesome ROM but no BT.
after 1 month I installed the stock ROM using qfil.
to solve the battery and notification issue, I uninstalled the security app trough adb.
after that, the battery improved a lot, charging faster, lasting longer, notifications working.
after 1 month, yesterday, I received the ota (one after another), so now on 11.5.247 ST, very good battery, notifications, Bluetooth, NFC working well so far.

There is any tutorial to uninstall the security app?

Gyroscope not working [HELP]

Hi,
I updated the ROM to Chinese ROM v3.25 and then did a rollback to Global Version ROM. Now the device is unable to detect any sensors.
Has anybody faced this thing. And can anybody help me fix this issue.

xameer787 said:
Hi,
I updated the ROM to Chinese ROM v3.25 and then did a rollback to Global Version ROM. Now the device is unable to detect any sensors.
Has anybody faced this thing. And can anybody help me fix this issue.
Click to expand...
Click to collapse
yes i faced it now you need to wipe everything to fix it

walkwitmeinhel said:
yes i faced it now you need to wipe everything to fix it
Click to expand...
Click to collapse
So I just have to do factory reset to fix it!? Is that it?

xameer787 said:
So I just have to do factory reset to fix it!? Is that it?
Click to expand...
Click to collapse
yesbit worked for me

Gyroscope... [Giroscopio..]
Mod edit - translated by https://www.deepl.com/translator:
I updated my mobile phone to the Chinese ROM and then returned it to the global one but the gyro no longer detects it, among other things as the screen recorder does not appear either, some aspects in the camera like aloe motion, 8k, all those things disappeared when I returned it to the normal ROM, what is the reason for this problem? Or is there another ROM other than the Chinese one that can return everything to normal
************************
Actualice mi celular a la ROM china y después la regresé a la global pero el giroscopio ya no lo detecta, entre otras cosas como el grabador de pantalla tampoco aparece, algunos aspectos en la cámara como aloe motion, 8k, todas esas cosas desaparecieron cuando lo regresé a la ROM normal, a que se debe ese problema? O existe otra ROM que no sea la china que pueda devolver todo a lo normal