Hi ! I have just downgraded to PIE via NewFlasher and I'm running Stock pie.
My bootloader is unlocked.
I enter fastboot via Volume up key + connect USB
fastboot devices shows
BH9035KS9E fastboot
then I try to run
fastboot flash recovery twrp-3.3.1-0-lilac-pie-5.img
but it fails every time, with different messages, for instance
Sending 'recovery' (34548 KB) FAILED (Write to device failed (No such device))
fastboot: error: Command failed
I noticed that the blue led turns off immediately after I try to execute the fastboot flash
I've tried rebooting and several different cables.
I also tried with the linux and win10 version of fastboot, but no luck so far.
I also tried to boot via
fastboot boot twrp-3.3.1-0-lilac-pie-5.img
but the error message is the same
I also tried several versions of twrp ... and I don't know what else to try !
Any ideas ? thx !
Did you other cables?
Did you try other usb ports?
Did try usb 2.0? usb 3.0?
It works for me after any error.
Try another pc too.
If you face the same issue, it is a problem with the device.
VD171 said:
Did you other cables?
Did you try other usb ports?
Did try usb 2.0? usb 3.0?
It works for me after any error.
Try another pc too.
If you face the same issue, it is a problem with the device.
Click to expand...
Click to collapse
yep, tried all that
VD171 said:
Did you other cables?
Did try usb 2.0? usb 3.0?
Click to expand...
Click to collapse
this gave me an idea, silly but it worked, I tried to connect my usb cable to an old usb 2.0 splitter... and it worked, have no idea why !
thanks !
enorrmann said:
this gave me an idea, silly but it worked, I tried to connect my usb cable to an old usb 2.0 splitter... and it worked, have no idea why !
thanks !
Click to expand...
Click to collapse
well, definitely our creativity is the solution
you are welcome
Related
When I try to flash the boot.img by running the phone in Fastboot USB it does not connect with my PC. I have installed the latest version of SDK and the necessary files that need to be installed such as fasboot.exe, etc.
I had successfully flashed a boot.img before reformatting my PC but now the phone disconnects when in Fastboot USB mode although it can connect and is shown in Device Manager when inside the phone OS.
reeper250 said:
When I try to flash the boot.img by running the phone in Fastboot USB it does not connect with my PC. I have installed the latest version of SDK and the necessary files that need to be installed such as fasboot.exe, etc.
I had successfully flashed a boot.img before reformatting my PC but now the phone disconnects when in Fastboot USB mode although it can connect and is shown in Device Manager when inside the phone OS.
Click to expand...
Click to collapse
install htc sync for htc drivers... Check my sign... U can find ADB and fastboot drivers with list of commands...
shiromau said:
install htc sync for htc drivers... Check my sign... U can find ADB and fastboot drivers with list of commands...
Click to expand...
Click to collapse
I have already done all of that but the phone still disconnects when on Fastboot USB mode
reeper250 said:
I have already done all of that but the phone still disconnects when on Fastboot USB mode
Click to expand...
Click to collapse
Well anyways it could be multiple things. It could be
1. You dont have proper drivers (but u said above you do with latest SDK and HTC Sync installed)
2. Broken USB port on computer
3. Broken mini HDMI port on your phone
4. Broken Cable.
You wouldnt by any chance be using PACman are you? I actually had some problems where my computer would not detect PACman in fastboot. If thats the case reflash PACman and try again. If that still doesnt work, then flash another ROM with full wipe, then see if it connects.
072665995 said:
Well anyways it could be multiple things. It could be
1. You dont have proper drivers (but u said above you do with latest SDK and HTC Sync installed)
2. Broken USB port on computer
3. Broken mini HDMI port on your phone
4. Broken Cable.
You wouldnt by any chance be using PACman are you? I actually had some problems where my computer would not detect PACman in fastboot. If thats the case reflash PACman and try again. If that still doesnt work, then flash another ROM with full wipe, then see if it connects.
Click to expand...
Click to collapse
I was running PACman but after I installed the latest update for it my phone kept bootlooping so I am currently running CyanVivo X. It connects fine using the USB cable but it just doesn't connect when going into Fastboot USB.
I can also connect through the recovery menu with Clockwork Recovery.
You have to make sure whether your USB port is broken or the cable itself.
Enviado do meu Incredible S
thiagofbrito said:
You have to make sure whether your USB port is broken or the cable itself.
Enviado do meu Incredible S
Click to expand...
Click to collapse
It is not the USB port or the cable because it works 100% fine when not in Fastboot USB. The phone connects perfectly fine within the ROM and in Clockwork Recovery but not in Fastboot USB. I am thinking that re-unlocking the phone may help.
EDIT: I was using a USB 3.0 port and that was the issue... For some reason it didn't like the USB 3.0 in Fastboot USB << Heads up for anyone else having this issue.
reeper250 said:
It is not the USB port or the cable because it works 100% fine when not in Fastboot USB. The phone connects perfectly fine within the ROM and in Clockwork Recovery but not in Fastboot USB. I am thinking that re-unlocking the phone may help.
EDIT: I was using a USB 3.0 port and that was the issue... For some reason it didn't like the USB 3.0 in Fastboot USB << Heads up for anyone else having this issue.
Click to expand...
Click to collapse
Is there any fix for this? My ultrabook only has USB 3.0 ports...
Yeah i've been having this same issue exactly for 3 days already but clueless. Shall there be anyone who had figured it out, plz kindly share the solution ok.
Thanks in advance
reeper250 said:
It is not the USB port or the cable because it works 100% fine when not in Fastboot USB. The phone connects perfectly fine within the ROM and in Clockwork Recovery but not in Fastboot USB. I am thinking that re-unlocking the phone may help.
EDIT: I was using a USB 3.0 port and that was the issue... For some reason it didn't like the USB 3.0 in Fastboot USB << Heads up for anyone else having this issue.
Click to expand...
Click to collapse
blackbird2394 said:
Is there any fix for this? My ultrabook only has USB 3.0 ports...
Click to expand...
Click to collapse
Denim Guy said:
Yeah i've been having this same issue exactly for 3 days already but clueless. Shall there be anyone who had figured it out, plz kindly share the solution ok.
Thanks in advance
Click to expand...
Click to collapse
No fix unless you want to replace your USB 3 ports with USB 2 ports.
hello, i have a probleme with my usb in fastboot mode. out of the fastboot ,usb is working but in fastboot the pc cannot connect to phone. fastboot usb is write but impossible to find phone with exploreur Windows or sdk... can you help me please and thank for your job .
absynte said:
hello, i have a probleme with my usb in fastboot mode. out of the fastboot ,usb is working but in fastboot the pc cannot connect to phone. fastboot usb is write but impossible to find phone with exploreur Windows or sdk... can you help me please and thank for your job .
Click to expand...
Click to collapse
Have you ticked the USB debugging in Developer options ?
USB problem
philos64 said:
Have you ticked the USB debugging in Developer options ?
Click to expand...
Click to collapse
yes,i have tried with and without.
Are you in fastboot on your phone?
USB problem
yes,sure. fastboot/power/ fastboot usb ,driver ok but nothing happened. and maybe i'm wrong but in fastboot usb mode ,debuging or not doesn't change anything ?
i have try to relock and re-unlock , with sdk , no differences.
i have (maybe problem causes) try to flash with sdk htc1recovery.img,flash ok but it cannot works.
before,i have use revone.bin utility with sdk, s-off ok ,i have just tried one time.
i have tried too usb driver compilation from xda. same problem...
my phone is debrande and no tampered
model 801n. -203
hboot 1.44.0000
absynte said:
yes,sure. fastboot/power/ fastboot usb ,driver ok but nothing happened
Click to expand...
Click to collapse
what happens when you command
Code:
fastboot devices
?
Try another usb port, sometimes that helps.
USB problem
gee2012 said:
Try another usb port, sometimes that helps.
Click to expand...
Click to collapse
allready done...
USB problem
redbull123 said:
what happens when you command
Code:
fastboot devices
?
Click to expand...
Click to collapse
"no device detected" ... i will try again but at the moment my old pentium P4 is ko RIP ,my 9years old computer crash out 2 days ago :-$ i wait for my new configuration . Now i have no computer
So I'm getting into fastboot mode but it just says FASTBOOT not FASTBOOT USB even thought it's plugged in. When USB is plugged in I can't even get into fastboot mode. Any ideas?
Ephemera said:
So I'm getting into fastboot mode but it just says FASTBOOT not FASTBOOT USB even thought it's plugged in. When USB is plugged in I can't even get into fastboot mode. Any ideas?
Click to expand...
Click to collapse
Follow here
yatindroid said:
Follow here
Click to expand...
Click to collapse
Tried following it but had no luck. Plus I'm on HBOOT 1.57, S-OFF, Bootloader unlocked, and using Window 8.1. I tried Ubuntu and followed the steps, but the phone still doesn't read FASTBOOT USB.
Ephemera said:
Tried following it but had no luck. Plus I'm on HBOOT 1.57, S-OFF, Bootloader unlocked, and using Window 8.1. I tried Ubuntu and followed the steps, but the phone still doesn't read FASTBOOT USB.
Click to expand...
Click to collapse
Is your usb cable a data cable or only a charging cable? Make sure its data capable, not only charging cable, try another cable, try another port (usb 2.0).
What is your version of htc drivers?
alray said:
Is your usb cable a data cable or only a charging cable? Make sure its data capable, not only charging cable, try another cable, try another port (usb 2.0).
What is your version of htc drivers?
Click to expand...
Click to collapse
Latest HTC drivers, tried 4 cables, multiple USB ports along with other computers. It is not a driver issue because the phone doesn't say FASTBOOT-USB nor is it shown in device manager.
Ephemera said:
Latest HTC drivers, tried 4 cables, multiple USB ports along with other computers. It is not a driver issue because the phone doesn't say FASTBOOT-USB nor is it shown in device manager.
Click to expand...
Click to collapse
SO it might be a defective usb port on your phone. Does usb-otg works?
alray said:
SO it might be a defective usb port on your phone. Does usb-otg works?
Click to expand...
Click to collapse
I can't get into to recovery, it boot loops. So how would I be able to test it? Plus I don't think I have an OTG cable.
Ephemera said:
I can't get into to recovery, it boot loops. So how would I be able to test it? Plus I don't think I have an OTG cable.
Click to expand...
Click to collapse
I guess that if your phone isn't detected both in windows and ubuntu its maybe a bad usb port on the phone or maybe a corrupted bootloader.
What caused the bootloop?
alray said:
I guess that if your phone isn't detected both in windows and ubuntu its maybe a bad usb port on the phone or maybe a corrupted bootloader.
What caused the bootloop?
Click to expand...
Click to collapse
CM12 was installed then about 2 months later the screen was replaced (Phone was apparently completely drained), is there a way to fix a corrupted bootloader?
Have stumbled upon this https://www.ifixit.com/Answers/View/167884/iPhone+5s+-+Infinite+boot+loop+(after+screen+replacement
Hmmm this guy seems to have the same issue. I'm guessing a screw in the wrong spot causes some kind of short? Even though each screw had a different size and thread.
What do you think?
hello :cyclops:,
i bricked my phone, so i want to restore it using fastboot mode; the thing is that the pc doesnt detect it (the phone is charging but not connected), so i cannot flash anything;
the phone is bricked, so i can only get it to enter fastboot mode, and i've tried different usb cables, ports and even different pcs;
my last option is changing the usb board, but i was looking for any other ideas before doing that... thanks in advance
TRy install Fastboot package ROM with XiaoMiFlash.exe...
https://c.mi.com/oc/miuidownload/detail?guide=2
// ou, pc doesnt detect it
jojovrtak said:
TRy install Fastboot package ROM with XiaoMiFlash.exe...
https://c.mi.com/oc/miuidownload/detail?guide=2
// ou, pc doesnt detect it
Click to expand...
Click to collapse
dont worry, i end up solving it by trying even more cables
I tried to flash a rom (Grapheneos) with fastboot, i tried with the newest plattform-tools und flashed with a flash-all.bat, so nothing should go wrong. after flashing boot.img and other files the device reboots in fastbootd and my windows computer doesnt recognize my phone.
This happens even if i try to flash the original FW for the Pixel 4 XL
Can someone help me pls?
erryKing said:
I tried to flash a rom (Grapheneos) with fastboot, i tried with the newest plattform-tools und flashed with a flash-all.bat, so nothing should go wrong. after flashing boot.img and other files the device reboots in fastbootd and my windows computer doesnt recognize my phone.
This happens even if i try to flash the original FW for the Pixel 4 XL
Can someone help me pls?
Click to expand...
Click to collapse
Could be a driver issue. Try plugging into another port, then go into device manager. Look for exclamation points.
erryKing said:
I tried to flash a rom (Grapheneos) with fastboot, i tried with the newest plattform-tools und flashed with a flash-all.bat, so nothing should go wrong. after flashing boot.img and other files the device reboots in fastbootd and my windows computer doesnt recognize my phone.
This happens even if i try to flash the original FW for the Pixel 4 XL
Can someone help me pls?
Click to expand...
Click to collapse
USB debugging enabled? Could be a driver/cable issue. Use a known good USB-A data cable, not USB-C to USB-C.
Flashing stock boot image to both slots usually gets you back into System.
All else failed? Try full OTA image in Recovery via ADB.
v12xke said:
USB debugging enabled? Could be a driver/cable issue. Use a known good USB-A data cable, not USB-C to USB-C.
Flashing stock boot image to both slots usually gets you back into System.
All else failed? Try full OTA image in Recovery via ADB.
Click to expand...
Click to collapse
Ive tried with different cables and also with windows and linux on my notebook so i dont think its a driver issue.
I also tried to flash boot image on all slots, this was succsefull but after reboot it starts in the Fastboot Mode with the Enter reason: no valid slot to boot.
I dont know what to do... Do you think some Smartphone Repair Stores can fix this?
Chance Ill said:
Could be a driver issue. Try plugging into another port, then go into device manager. Look for exclamation points.
Click to expand...
Click to collapse
Also check Windows Event Viewer to see if any errors are reported.
Sometimes reinstalling the driver does the trick.
And reboot Windows...