How can this be done? I'd like the stock UK one (BTU service provider I believe?) as currently it's showing as VOD/VOD EUX etc.
Will my data be wiped? Is it really worth changing and going through the hassle? I've always had stock firmwares either out the box or flashed on Odin by myself but this time it didn't remove the carrier stuff.
I did initially flash the latest stock BTU firmware (all 4 files including CSC not home CSC), yet was still met with the carrier apps and the service provider info says VOD, I'm on Three the phone is unlocked but from Vodafone
uk786 said:
How can this be done? I'd like the stock UK one (BTU service provider I believe?) as currently it's showing as VOD/VOD EUX etc.
Will my data be wiped? Is it really worth changing and going through the hassle? I've always had stock firmwares either out the box or flashed on Odin by myself but this time it didn't remove the carrier stuff.
I did initially flash the latest stock BTU firmware (all 4 files including CSC not home CSC), yet was still met with the carrier apps and the service provider info says VOD, I'm on Three the phone is unlocked but from Vodafone
Click to expand...
Click to collapse
csc detect from SIM CARD .
Related
Hi Guys,
I purchased a Note 8 (950F) through Gumtree and although I knew it had the Telstra firmware,
I figured I'll just flash the regular Australian XSA unbranded firmware via Odin
and get rid of the Telstra branding as I have done in the past with other Samsungs.
Currently I use an Optus sim (which works) but have lost VoLTE and WiFi calling.
I have tried searching through these forums for a solution but can't get a clear answer.
When I flash the unbranded XSA firmware (BL, AP, CP and CSC, NOT Home_CSC)
I still get the Telstra branding and the software info remains on TEL/TEL/TEL.
Is this normal now? Are we forced to buy a phone from a network carrier if we want to use their services?
Or is there a way to make the switch but I am just overlooking something.
I don't want to root the phone or install anything custom as this will break some banking apps that I'm using.
Please help...
Currently I'm on XEF/XEF/VAU because just upgraded to Oreo, the original CSC is VAU/VAU/VAU
0. Backup your data
1. Download New Zealand or other country firmware.
2. Take both SIM and SD card out.
3. Flash the firmware of other country using CSC, not home_csc
4. Then check your CSC, should be changed.
I did't test the following steps, but I will try this weekend.
5. Flash back to Australia firmware.
6. Check the CSC number, should be changed to XSA
7. Insert SIM card.
hinnn said:
Currently I'm on XEF/XEF/VAU because just upgraded to Oreo, the original CSC is VAU/VAU/VAU
0. Backup your data
1. Download New Zealand or other country firmware.
2. Take both SIM and SD card out.
3. Flash the firmware of other country using CSC, not home_csc
4. Then check your CSC, should be changed.
I did't test the following steps, but I will try this weekend.
5. Flash back to Australia firmware.
6. Check the CSC number, should be changed to XSA
7. Insert SIM card.
Click to expand...
Click to collapse
Thanks for your input, I was considering this as I want Oreo as well but not game enough to try and mix other countries CSC's yet.
I read somewhere that Oreo will be widely available for most countries as of 1st of April, so I might wait till then and try again.
This does NOT necessarily mean Oz...
Remember, we are at the end of the list to get it as our stupid legal system upheld some patents on icons that Apple took out...
Also, if you're with any of the Telco's, add at least 6 months to that date...
Did you ever manage to get this sorted out? I'm in a similar boat to you, I have an Optus device but a Telstra Sim, when using the Telstra sim, I have no option for VoLTE, but when I use my Optus sim I do. Would like to get VoLTE and other features working on my Telstra sim.
I have done several searches re the above.
As stated in a previous post I want to change my phone back to tel/tel/tel from xsa/xsa /tel ( xsa is generic unbranded phone in australia and telstra is a branded in Australia phone )
I have no oem unlock available as it has not been 7 days since I have flashed my phone.
should it be possible to change the csc without oemunlock with olin_csc not home_csc ( and using the other associated firmware files bl,ap etc)
and picking f reset time, auto reboot and repartition in odin .
You're good, oem unlock is only needed for flashing custom binaries.
I'm curious, how did you get xsa/xsa/tel? I have been trying to achieve this but haven't had success.. I have flashed stock xsa rom with Odin with CSC and wiped everything and it's still tel/tel/tel. I even tried Optus software and it never changes..
kloony11 said:
I'm curious, how did you get xsa/xsa/tel? I have been trying to achieve this but haven't had success.. I have flashed stock xsa rom with Odin with CSC and wiped everything and it's still tel/tel/tel. I even tried Optus software and it never changes..
Click to expand...
Click to collapse
I did the below with oreo firmware
flash xef french firmware and setup without simcard or sd card ( you will get xef/xef/tel) then flash xsa firmware
both times use csc not homecsc. you will get xsa/xsa/tel
I
but even though I tried to reverse the above with the telstra firmware instead of xsa after reflashing french to try to get back to telstra but it did not I still have xsa/xsa /tel. no biggy samsung pay volte and richtext messages work still . Just thought I might get back to branded for something to do.
g_alahad12345 said:
I did the below with oreo firmware
flash xef french firmware and setup without simcard or sd card ( you will get xef/xef/tel) then flash xsa firmware
both times use csc not homecsc. you will get xsa/xsa/tel
I
but even though I tried to reverse the above with the telstra firmware instead of xsa after reflashing french to try to get back to telstra but it did not I still have xsa/xsa /tel. no biggy samsung pay volte and richtext messages work still . Just thought I might get back to branded for something to do.
Click to expand...
Click to collapse
Thanks for that info. Will try this. Hopefully I can get Volte and Wifi calling to work with Optus, even though its a Telstra phone.
solution to get back to telstra
hello all got back to telstra through the factory binary in the below post
and following steps there
https://forum.xda-developers.com/showpost.php?p=74324845&postcount=87
I have recently flashed the latest BTU firmware from Sammobile, onto a H3G phone in order to remove all the Three UK branding and bloatware.
Although everything seems successful, in the "software information" section, it now reads as:
SAOMC_SM-N960F_OXM_XEU_PP_0009
XEU/XEU/H3G
How do I get this to XEU/XEU/XEU or BTU/BTU/BTU?
Only point to note is that I didn't have OEM unlocking on in the developer options before flashing, if that makes any difference?
Also I'm not seeing any options for WiFi or 4G calling, even when I flash my carrier firmware I still don't have the options :/
see
https://forum.xda-developers.com/showpost.php?p=79107773&postcount=1346
Hey all
Strange one here, i have a SM-G977B (S10 5G on EE UK), i have unlocked it and trying to flash BTU firmware on it via ODIN (download fw from sammobile)
It flashes ok and passes but when phone starts up its CSC is TEL! (Australia!!)
I have re done the flash with XEU and still the same. firmware version says TEL/TEL/EVR in settings
any ideas on this? can this model be flashed to a different region? i want it on BTU not EVR (EE UK)
tried few versions of ODIn too, and left all check boxes default
Thanks
ok, i have reflashed the latest EVR firmware back to the phone and it has taken this fine
Wonder why it doesnt like BTU or XEU?
What firmware files were you trying to flash specifically?
Sounds like you downloaded the wrong one. What are the names of the firmware files you flashed?
the_scotsman said:
What firmware files were you trying to flash specifically?
Sounds like you downloaded the wrong one. What are the names of the firmware files you flashed?
Click to expand...
Click to collapse
Hi
Tried these
https://www.sammobile.com/samsung/firmware/SM-G977B/BTU/download/G977BXXS2ASJ7/299842/
https://www.sammobile.com/samsung/firmware/SM-G977B/XEU/download/G977BXXS2ASJ7/299840/
The above all flash on in Odin, but when the phone starts (even with uk sim in the phone) it defaults to Australia language and 2x Telstra apps install automatically, software info says tel/tel/evr
I then tried this one:
https://www.sammobile.com/samsung/firmware/SM-G977B/VOD/download/G977BXXU2ASJ5/299590/
And the above install the 2x Vodafone uk apps automatically which is fine as I am on Vodafone uk but in software Info is still says vod/vod/evr
What my issue is now is I don’t seem to get 5g on this phone even though I’m on a a 5g contract and has worked previously on a note10+ 5g handset.
Is this handset 5g modem locked to ee?
bigup7 said:
Hey all
Strange one here, i have a SM-G977B (S10 5G on EE UK), i have unlocked it and trying to flash BTU firmware on it via ODIN (download fw from sammobile)
It flashes ok and passes but when phone starts up its CSC is TEL! (Australia!!)
Click to expand...
Click to collapse
Did you enable OEM unlock in developer options before flashing?
I am waiting for delivery of an EE branded S10 5G tomorrow and planned to flash BTU firmware
dezborders said:
Did you enable OEM unlock in developer options before flashing?
I am waiting for delivery of an EE branded S10 5G tomorrow and planned to flash BTU firmware
Click to expand...
Click to collapse
Didn't think I needed to.
Gave up and went back to evr firmware.
Lmk how you get on please
bigup7 said:
Didn't think I needed to.
Gave up and went back to evr firmware.
Lmk how you get on please
Click to expand...
Click to collapse
OK, well I have always had to do that to change CSC via FW flash since the S9 range was released in 2018.
I am waiting for postman to deliver my S10 5G today so will try to flash BTU with OEM Unlock enabled, and let you know the outcome.
(If it doesn't work for me, i will do same as you and flash a network specific FW via Odin - H3G is my network provider).
bigup7 said:
Didn't think I needed to.
Gave up and went back to evr firmware.
Lmk how you get on please
Click to expand...
Click to collapse
Didn't work ended up with TEL CSC code so just flashed latest H3G
dezborders said:
Didn't work ended up with TEL CSC code so just flashed latest H3G
Click to expand...
Click to collapse
If you go to software information in settings, does it say h3g/h3g/evr?
bigup7 said:
If you go to software information in settings, does it say h3g/h3g/evr?
Click to expand...
Click to collapse
Yes exactly. My product code is also SM-G977BZAAEVR, so its always going to be an EE UK handset
Hello,
I have the same phone (SM-G977B), I exchanged it with someone in Shanghai (without a box, stupid me)
It was rooted with some CHC firmware (which did not let me download any Google play services), I tried to root the phone (my first time) and ended up re-locking the bootloader.
Later on, while trying different things, I ended up deleting the firmware from TWRP (as I formatted the data, cache folders/directories) as it was not booting up (bootloop on Samsung logo).
Long story short (and rather sad and stupid):
I have a brick phone which has no SD card slot, No OS installed, I do not know the original CSC (except that it was bought in some country in Europe), other firmwares does not flash with Odin (gives me Repartition error failed error), I am unable to mount the device (thought I could transfer the firmware using MTP), I can not change TWRP (downgrade or upgrade) as disk won't mount (for some reasons). I have formatted the disk, changes its format to ext4, ext2 etc.
Any ideas?
I have Note 9 with Indonesian Firmware and im thinking to flash Australian firmware. I checked the phone model number and its exactly same (N960F/DS). what im worried about is
1. if I flash Australian firmware, would I keep getting the notification if theres any patch / software update or I'll have to find the update manually?
2. if I still get the patch / software update notification, would I get the Australian ver. or the original (Indonesian) ver? (im afraid if its different)
3. Would Samsung Pay System work in Australian firmware? ( I read if you flash different firmware to the phone model, some functions wont work including Samsung Pay System).
Any help would greatly appreciated
1. if I flash Australian firmware, would I keep getting the notification if theres any patch / software update or I'll have to find the update manually?
if you flash the firmware with the Austrailian CSC, you will only get updates from carriers within that CSC in accordance with what network your SIM is connecting to. Only time you flash them manually is if you have an aftermarket recovery such as TWRP
2. if I still get the patch / software update notification, would I get the Australian ver. or the original (Indonesian) ver? (im afraid if its different)
see above
3. Would Samsung Pay System work in Australian firmware? ( I read if you flash different firmware to the phone model, some functions wont work including Samsung Pay System).
samsung pay doesnt work in certain countries period. that might be what youve been seeing
Youdoofus said:
1. if I flash Australian firmware, would I keep getting the notification if theres any patch / software update or I'll have to find the update manually?
if you flash the firmware with the Austrailian CSC, you will only get updates from carriers within that CSC in accordance with what network your SIM is connecting to. Only time you flash them manually is if you have an aftermarket recovery such as TWRP
2. if I still get the patch / software update notification, would I get the Australian ver. or the original (Indonesian) ver? (im afraid if its different)
see above
3. Would Samsung Pay System work in Australian firmware? ( I read if you flash different firmware to the phone model, some functions wont work including Samsung Pay System).
samsung pay doesnt work in certain countries period. that might be what youve been seeing
Click to expand...
Click to collapse
I tried to flash with Global Australian CSC (not for any specific carrier) and I was be able to get update OTA. Now, the problem is after I flashed Au firmware (incl, BL, AP, CP, CSC) with Odin3B, somehow the service provider software has changed to AUT/AUT/XID while previously XID/XID/XID which is weird. I tried flash using HOME CSC file and couple times I re-download the firmware and flashed other unlocked au firmwares (with android 10 version) it still gave me AUT (Switzerland) instead of XSA (Australia).
Any idea why?