Database Develop

Kids mode apks?

Can anyone pull the kids mode apks from their tab and post them for me? I have a debated Tom that I love but my wife wants those apps back...
The only ports I can find are from the 5th and they don't quite work on this tab.
Probably don't need all the apps within the app but will need the kidsapps, kidshome, installer, landingwidget, and parental control apks...
Any help with this would be awesome.

TroyLeeWells said:
Can anyone pull the kids mode apks from their tab and post them for me?
Click to expand...
Click to collapse
Yes. Here it's:

Thank you so much! That did the trick!
Sent from my SM-T320 using XDA Free mobile app

I tried this apk and it won't install.
Sent from my SM-T320 using Tapatalk

gksmith said:
I tried this apk and it won't install.
Click to expand...
Click to collapse
Interesting. I pulled it from the deodexing firmware T525XXUANH4 for t525th. It works for me, of course. Perhaps the reason is deodex. Well, here's set of apk&odex (place in folder /system/app and give rights rw-r--r--):

ViAlexSt said:
Interesting. I pulled it from the deodexing firmware T525XXUANH4 for t525th. It works for me, of course. Perhaps the reason is deodex. Well, here's set of apk&odex (place in folder /system and give rights rw-r--r--):
Click to expand...
Click to collapse
Hi,
Can you be more specific? Where to place both files? I know .apk can go anywhere, but no clue where to place other one. Can't make it work
Thanks!

kstawia said:
Can you be more specific? Where to place both files?
Click to expand...
Click to collapse
Damn! I'm sorry, I didn't specify a complete path at once: system/app
Files permissions are:

ViAlexSt said:
Damn! I'm sorry, I didn't specify a complete path at once: system/app
Files permissions are:
Click to expand...
Click to collapse
Hi! i did it, but still not working. I´m using CyanogenMod 12.1 im my sm-t320.

canikrause said:
still not working. I´m using CyanogenMod 12.1
Click to expand...
Click to collapse
Well, I would probably be surprised if that Kids Mode began to work. Firstly, it's this version of the apk for Kitkat. Second, it needs Touchwiz. Correct me if I'm wrong.
At least on CM 12.1 I couldn't run a version for Android 5.1.

not working
ViAlexSt said:
Interesting. I pulled it from the deodexing firmware T525XXUANH4 for t525th. It works for me, of course. Perhaps the reason is deodex. Well, here's set of apk&odex (place in folder /system/app and give rights rw-r--r--):
Click to expand...
Click to collapse
SecKidsModeInstaller(app+odex) did not work on my cm-12.1-20150507-UNOFFICIAL-i9082.
The icon appeared but did not installd.
Giving error.

Getting the following error, root checked, permission granted, 4.2.2. Any thoughts?

hookerpuncher said:
Getting the following error, root checked, permission granted, 4.2.2. Any thoughts?
Click to expand...
Click to collapse
someone will probably have to have it installed then pull app data for libs folder if there are any. then you would need to flash the /data/app/name of apk folder with libs to the correct area and also the main .apk to /system/app
but then again some manufacturer's apps are not compatible with aosp or cm based roms and need porting to work
(if that is what you are running)

hookerpuncher said:
Getting the following error, root checked, permission granted, 4.2.2. Any thoughts?
Click to expand...
Click to collapse
Update to latest superusersu, and use root browser or similar app
Sent from my ATRIX HD using XDA Free mobile app

Could U pls put the app link here? This app is 121MB
I tried to downloadt the app by the original installer several times, but it always stops on ~68MB !
Pls don't put the installer file here, my device has it.
note pro 12.2 3g
5.0.2

Having had a crack at this myself... On my newsed SM-T325 I just got myself. I can only suspect that the clue is in the name seckidsmode... Sec here referring to security al-la knox mode perhaps?! no, not so much as full on knox, as such. But is still tied up somehow in as far as once its gone its gone. At least this is what I found when I tried to reinstall it back onto a rooted, but otherwise stock... And 0x0 valid SM-T325.
You might not care to hear it, but the only way I was able to recover (Twice now, as I write this!), was to re-flash the current BOC1 Firmware on top of everything again. Thankfully this hasn't tripped up my Knox... yet though I need to re-install TowelRoot + SuperSU again, unlike Knox however, you can install, and use this Kids Mode while rooted. But, as to reinstall it again after you've yanked it?
Well lets say that I'm kinda interested to know that One too...

ghaith_assaf said:
SecKidsModeInstaller(app+odex) did not work on my cm-12.1-20150507-UNOFFICIAL-i9082.
The icon appeared but did not installd.
Giving error.
Click to expand...
Click to collapse
My guess is 'cause you have to have TouchWiz installed... It is a Stock Samsung APK after all.

Ichijoe said:
My guess is 'cause you have to have TouchWiz installed... It is a Stock Samsung APK after all.
Click to expand...
Click to collapse
Mute point now... But, I was on Stock at the time.
The only way I managed at the time to recover the Kids Mode, was to re-Stock, and to not removing it to begin with.

[build.prop] Android M Developer Preview 1 Build.prop

Extracted from my Nexus 5
http://pastebin.com/Qg8esJVM

Why would this be useful lol

Run for Multirom?

GTRsdk said:
Extracted from my Nexus 5
http://pastebin.com/Qg8esJVM
Click to expand...
Click to collapse
for?

Yay?

Could be useful for those that want to change DPI's, but other than than I'm not sure

Koragg618 said:
Could be useful for those that want to change DPI's, but other than than I'm not sure
Click to expand...
Click to collapse
Not really [emoji14]

I figured I would upload it in case someone needed it. It's easy to be the person that messes something up in the build.prop, but instead of having to download the several hundred MB for the stock image (assuming it got deleted after flashing), all a person would have to do is to go to the paste and download it there.
Not everyone on XDA is a master of all Android, and I would guarantee you that someone will download Android M and then modify the build.prop at a time when it isn't very convenient, only to not have the ability to quickly flash it back.

{ROM} GSI Lineage OS For Our Redmi 6!

Hi There Everyone!​First a brief: I've been a longtime XDA user, but never found the need to create an account. Now, I bought a Redmi 6 and I'm really disappointed by the development:crying:, so I thought i'd chip in a bit I don't have permission yet, so I posted this here.
As you know, till now there are NO Custom ROM's available. This is really sad, and I can't live with MIUI. So I decided to give GSI (Generic System Image) ROM's a try.
And guess what? They work! I tried installing Lineage OS 15.1 on our cereus. The rom is really fast and smooth. Here's what I found:
Working:
Wifi
Bt
Camera
Vibration
Sound
Finger Print
Bugs:
SIM detected, but no range found. RIP calls/sms/data. Looks like a problem with the raido's.
Headphones don't work
I couldn't test hotspot and gps.
Even though there is a bad bug, it still works surprisingly on this MediaTek SoC with no drivers / kernels. All we need is a little paching and we should be good to go!
Give it a try. Ill post guide on how to do this later. For now, i'm using miui cuz i wanna make phone calls
Here are screenshots:
https://ibb.co/J7FRk9K
https://ibb.co/sbNk3N4
https://ibb.co/K5KDW43
https://ibb.co/5Mfrz0d
https://ibb.co/kHCwqb2
https://ibb.co/S3X9gkv
https://ibb.co/1JYNmqp

Yes, we know. We tested this long time ago, there are pretty long discussions in twrp thread comments

What about finger print reader?

TanRayCz said:
Yes, we know. We tested this long time ago, there are pretty long discussions in twrp thread comments
Click to expand...
Click to collapse
I know, and I've read through all that. They are all buried inside TWRP threads, and not everyone knows about GSI. I made this so people know, and I'm also going to make an other thread with instructions on how to flash a GSI rom for our Redmi 6 soon (It's a little tricky getting TWRp to work and all...)

hiitsrudd said:
What about finger print reader?
Click to expand...
Click to collapse
It works! Sorry, I forgot to mention that - added it now :good: Btw, even though it works, it isn't as accurate and as fast as MIUI.

Tech_Expert said:
I know, and I've read through all that. They are all buried inside TWRP threads, and not everyone knows about GSI. I made this so people know, and I'm also going to make an other thread with instructions on how to flash a GSI rom for our Redmi 6 soon (It's a little tricky getting TWRp to work and all...)
Click to expand...
Click to collapse
I meant to say good job about putting this all together. Nice.

I just randomly remembered when i was trying this ROM some time ago. Headphones doesn't work.
(Adding this to post would be ideal)
Edit: It could also be the Pixel Experience ROM. But i don't remember.

TanRayCz said:
I just randomly remembered when i was trying this ROM some time ago. Headphones doesn't work.
(Adding this to post would be ideal)
Edit: It could also be the Pixel Experience ROM. But i don't remember.
Click to expand...
Click to collapse
Thanks! I tried LOS again, and I can confirm that headphones don't work. Added that to the post:good: Btw, do you know any GSI ROMs for Cereus that can actually make calls and work well?

Tech_Expert said:
Thanks! I tried LOS again, and I can confirm that headphones don't work. Added that to the post:good: Btw, do you know any GSI ROMs for Cereus that can actually make calls and work well?
Click to expand...
Click to collapse
All i tried was LOS and Pixel Eperience. Both are same, except PE has Android 9.0. I tried treble RR, it had really cool logo while booting, and i was really excited for RR because i never tried it. But i never made it to boot. Boot logo is looping infinitely and i tried fresh installing (With MiFlash clear) about 10 times.
Edit: Maybe if you would want to, you can give it a try https://forum.xda-developers.com/pr...0-resurrection-remix-v7-0-arm64-32-b-t3891636
Edit: I didn't understand most of it, but i could start adb logcat while booting. From all i could understand, all apps were dying and restarting all over.

https://drive.google.com/file/d/1KSfa8BcgQtEdnHQnbQ8mhGx_rDHSDD7t/view
Omni rom, android 9, works pretty good, no major bugs.
Installation instructions on screenshot in attachments.

[email protected] said:
https://drive.google.com/file/d/1KSfa8BcgQtEdnHQnbQ8mhGx_rDHSDD7t/view
Omni rom, android 9, works pretty good, no major bugs.
Installation instructions on screenshot in attachments.
Click to expand...
Click to collapse
That's nice and all, but more info would be cool. SIM works?

TanRayCz said:
That's nice and all, but more info would be cool. SIM works?
Click to expand...
Click to collapse
Yep, only USSD is broken by default. See 11) on screenshot.
Calls/sms works out of box.
Don't know about volte since my carrier doesn't support it.

[email protected] said:
Yep, only USSD is broken by default. See 11) on screenshot.
Calls/sms works out of box.
Don't know about volte since my carrier doesn't support it.
Click to expand...
Click to collapse
Speaking of, what does append persist.sys.radio.ussd.fix=true to /system/build.prop mean?
Sorry if it's something widely know im kind of a noob.

JosifBoga666 said:
Speaking of, what does append persist.sys.radio.ussd.fix=true to /system/build.prop mean?
Sorry if it's something widely know im kind of a noob.
Click to expand...
Click to collapse
Seems that mtk ussd fix breaks something on other phones. So, this is flag to enable it.
------
Ahh, you mean how to append?
Open /system/build.prop file with text editor that has root access, add line to end, save file, reboot.
Or you can do this via adb/terminal emulator:
1) su
2) echo persist.sys.radio.ussd.fix=true >> /system/build.prop

[email protected] said:
Seems that mtk ussd fix breaks something on other phones. So, this is flag to enable it.
------
Ahh, you mean how to append?
Open /system/build.prop file with text editor that has root access, add line to end, save file, reboot.
Or you can do this via adb/terminal emulator:
1) su
2) echo persist.sys.radio.ussd.fix=true >> /system/build.prop
Click to expand...
Click to collapse
But this doesn't fix ussd right?

JosifBoga666 said:
But this doesn't fix ussd right?
Click to expand...
Click to collapse
I haven't tested this, but why do you think so?

[email protected] said:
I haven't tested this, but why do you think so?
Click to expand...
Click to collapse
Since you said ussd is broken by default i thought that that wouldn't fix it.

JosifBoga666 said:
Since you said ussd is broken by default i thought that that wouldn't fix it.
Click to expand...
Click to collapse
By default — right after installing, without adding this line.

[email protected] said:
By default — right after installing, without adding this line.
Click to expand...
Click to collapse
Oh my bad. By the way I'm going to install this rom and I'll see if that line fixes ussd. Then we'll have a probably fully functional rom for the redmi 6. ****ing finally. It's about time.

JosifBoga666 said:
Oh my bad. By the way I'm going to install this rom and I'll see if that line fixes ussd. Then we'll have a probably fully functional rom for the redmi 6. ****ing finally. It's about time.
Click to expand...
Click to collapse
It doesn't work for me. Same as every single other GSI rom.

Nethunter HID interface not found [Fixed]

Hey so, when I launch nethunter then start chroot the HID interface doesn't get detected, it just says HID Interface not found
When I try to open Duckhunter HID and launch the attack it says Something went wrong with the permission of /dev/hidg*
I've gone to the terminal and written cd dev/hidg*
Then it said that hidg* wasn't found
how do I fix this?

EDllT said:
Hey so, when I launch nethunter then start chroot the HID interface doesn't get detected, it just says HID Interface not found
When I try to open Duckhunter HID and launch the attack it says Something went wrong with the permission of /dev/hidg*
I've gone to the terminal and written cd dev/hidg*
Then it said that hidg* wasn't found
how do I fix this?
Click to expand...
Click to collapse
In order to fix it I had to goto USB Arsenal disable ADB and change the usb type to HID

EDllT said:
In order to fix it I had to goto USB Arsenal disable ADB and change the usb type to HID
Click to expand...
Click to collapse
Thank You so much for posting how you fixed your USB issue even though no one replied. I was having the same problem and spent probably 3 hours over the last week Googling it.
This worked for me also! Thank you again. I'm on a Note 10 N970U if anyone is wondering.

Gregbmil1 said:
Thank You so much for posting how you fixed your USB issue even though no one replied. I was having the same problem and spent probably 3 hours over the last week Googling it.
This worked for me also! Thank you again. I'm on a Note 10 N970U if anyone is wondering.
Click to expand...
Click to collapse
hid working on Galaxy note 10? I have Note 9 and not working. We try everything about fix but nothing works. Can you give me your steps for fix it please?
Galaxy note 9
Lineage 17.6

anastasiszn said:
hid working on Galaxy note 10? I have Note 9 and not working. We try everything about fix but nothing works. Can you give me your steps for fix it please?
Galaxy note 9
Lineage 17.6
Click to expand...
Click to collapse
I think the trick is to disable adb in the USB Arsenal section and make sure you tap the "Set USB Function" towards the bottom to save it. I would assume if it works for Note 10 Snapdragon it would on Note 9 on Lineage. I'm on modified stock. It's very lightly modified to as far as I can tell.

Gregbmil1 said:
I think the trick is to disable adb in the USB Arsenal section and make sure you tap the "Set USB Function" towards the bottom to save it. I would assume if it works for Note 10 Snapdragon it would on Note 9 on Lineage. I'm on modified stock. It's very lightly modified to as far as I can tell.
Click to expand...
Click to collapse
I can't disable because it's already disable by default and can't enable on usb Arsenal option. I have exynos device.

anastasiszn said:
I can't disable because it's already disable by default and can't enable on usb Arsenal option. I have exynos device.
Click to expand...
Click to collapse
Hmmm....... Do you get a "USB set successfully" message if you change the USB setting to hid or mass storage or any other of the options?

Gregbmil1 said:
Hmmm....... Do you get a "USB set successfully" message if you change the USB setting to hid or mass storage or any other of the options?
Click to expand...
Click to collapse
Yes it's OK. In your device F_HID is YES?

anastasiszn said:
Yes it's OK. In your device F_HID is YES?
Click to expand...
Click to collapse
Funny, I had that same app already installed . But yes F_hid is "yes" I wonder what "F" stands for

Gregbmil1 said:
Funny, I had that same app already installed . But yes F_hid is "yes" I wonder what "F" stands for
Click to expand...
Click to collapse
When hid set to yes, force close nethunter app after set functions enable. Its a madness...
Gregbmil1 said:
Funny, I had that same app already installed . But yes F_hid is "yes" I wonder what "F" stands for
Click to expand...
Click to collapse
Can you send me your
Gregbmil1 said:
Funny, I had that same app already installed . But yes F_hid is "yes" I wonder what "F" stands for
Click to expand...
Click to collapse
Fix it after 4 years with this command.
mknod --mode=666 /dev/hidg0 c 240 0 && mknod --mode=666 /dev/hidg1 c 240 1 && dmesg | grep hidg

anastasiszn said:
When hid set to yes, force close nethunter app after set functions enable. Its a madness...
Can you send me your
Fix it after 4 years with this command.
mknod --mode=666 /dev/hidg0 c 240 0 && mknod --mode=666 /dev/hidg1 c 240 1 && dmesg | grep hidg
Click to expand...
Click to collapse
Thank You, that seemed to have worked. I wish I knew what the code means but it worked, lol. mknod is new to me

Gregbmil1 said:
Thank You, that seemed to have worked. I wish I knew what the code means but it worked, lol. mknod is new to me
Click to expand...
Click to collapse
which is your kernel topic?

anastasiszn said:
which is your kernel topic?
Click to expand...
Click to collapse
I don't know much about kernels but I'm pretty sure it's stock. Is that impossible if I have root? Lol. I've had 3 rooted phones in my life. All have been Samsung. S7, S8, and Note 10. The Note 10 is my first unlocked bootloader. I have not had the option to change kernels as far as I know so I never really looked into kernels.
The code you posted works great by the way, thanks again. I saved it because after a reboot HID Status goes back to default.
Check out the screenshot for my kernel details

Gregbmil1 said:
I don't know much about kernels but I'm pretty sure it's stock. Is that impossible if I have root? Lol. I've had 3 rooted phones in my life. All have been Samsung. S7, S8, and Note 10. The Note 10 is my first unlocked bootloader. I have not had the option to change kernels as far as I know so I never really looked into kernels.
The code you posted works great by the way, thanks again. I saved it because after a reboot HID Status goes back to default.
Check out the screenshot for my kernel details
Click to expand...
Click to collapse
send me your kernels link? its impossible to activate hid without custom kernel. you use nh kernel.

anastasiszn said:
send me your kernels link? its impossible to activate hid without custom kernel. you use nh kernel.
Click to expand...
Click to collapse
Kernel link? You mean the link to download the kernel I'm using? I really don't know, I just flashed a rom and it was a done deal.
anastasiszn said:
send me your kernels link? its impossible to activate hid without custom kernel. you use nh kernel.
Click to expand...
Click to collapse
Kerbal links? You mean the nh version? I installed about the only ROM available for my phone
ROM
BKLYN_NOTE10_ROM_V2.0.1.zip | by bklyn_syed for Galaxy Note 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
NetHunter is just the "Generic Arm64" version

Gregbmil1 said:
Kernel link? You mean the link to download the kernel I'm using? I really don't know, I just flashed a rom and it was a done deal.
Kerbal links? You mean the nh version? I installed about the only ROM available for my phone
ROM
BKLYN_NOTE10_ROM_V2.0.1.zip | by bklyn_syed for Galaxy Note 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
NetHunter is just the "Generic Arm64" version
Click to expand...
Click to collapse
Nice. You have exynos or snapdragon?

anastasiszn said:
Nice. You have exynos or snapdragon?
Click to expand...
Click to collapse
Snapdragon, I've always had snapdragon with the added bonus of an unlockable bootloader, lol. Until my Note 10 but there are not many of us. I'm guessing because it costs $60 to $100 to have it unlocked. So there is not much demand for Galaxy Note 10 kernels and roms.

Gregbmil1 said:
Snapdragon, I've always had snapdragon with the added bonus of an unlockable bootloader, lol. Until my Note 10 but there are not many of us. I'm guessing because it costs $60 to $100 to have it unlocked. So there is not much demand for Galaxy Note 10 kernels and roms.
Click to expand...
Click to collapse
Really really lucky

anastasiszn said:
Really really lucky
Click to expand...
Click to collapse
I said unlockable, what I meant to say was permanently locked bootloader, lol. My Note 10 is my first unlocked bootloader and it's great. I've had root on S7 and S8 but with locked bootloader. Sucks my screen is cracked on my Note 10 though. I also lost the stylus like a year ago, lol. I'm thinking about replacing the screen myself sometime soon
I think the $100 I paid to have it unlocked was worth it really. I regret nothing, lol.

Gregbmil1 said:
I said unlockable, what I meant to say was permanently locked bootloader, lol. My Note 10 is my first unlocked bootloader and it's great. I've had root on S7 and S8 but with locked bootloader. Sucks my screen is cracked on my Note 10 though. I also lost the stylus like a year ago, lol. I'm thinking about replacing the screen myself sometime soon
I think the $100 I paid to have it unlocked was worth it really. I regret nothing, lol.
Click to expand...
Click to collapse
No need pay for unlock bootloader

Question Can someone upload the apk for the latests stock cam app?

Looks like the last one is version 9.0.30.78 from update (S3SQ32.16-53-9)

I assume phone must be rooted?

azitoshi said:
I assume phone must be rooted?
Click to expand...
Click to collapse
not really with adb you can get it:
adb shell pm list packages
adb shell pm path your-package-name
adb pull full/directory/of/the.apk

Here you go GDrive

Killuminati91 said:
Here you go GDrive
Click to expand...
Click to collapse
Thanks @Killuminati91 what version it is? mine is 9.0.30.49 and with this one is still the same or the magisk module I made is not updating or needs something else.
I placed in in the module at /product/priv-app/MotCamera4/MotCamera4.apk
update: Looks like it is working if needs to be placed in magisk module with system/ first
version at the cam app is 9.0.30.78 but in config>apps... still says 30.49 mb there is another apk

Info in camera and settings/apps says 9.0.30.78. Its from the latest 16-53-9 EU Firmware. Yeah all partitions require /system/ first in magisk modules afaik.
TF1920 said:
version at the cam app is 9.0.30.78 but in config>apps... still says 30.49 mb there is another apk
Click to expand...
Click to collapse
What do you mean by this?

Killuminati91 said:
Info in camera and settings/apps says 9.0.30.78. Its from the latest 16-53-9 EU Firmware. Yeah all partitions require /system/ first in magisk modules afaik.
What do you mean by this?
Click to expand...
Click to collapse
The Cam app once opened on settings>about says version is 9.0.30.78 so looks like it is updated but closing the camera app and goign to system settings>apps>allapps>camera still says 9.0.30.49 on my device
Anyway i don't see much change with this app, we will need to wait for a new update or some works on the custom roms or someothing from the new xiaomi X12 Pro that has the same 200Mpx sensor

Yeah, the app itself is not the main problem for the sensor. Its deeper in the libs, you can see that focus is also broken in third party apps at 4k 60fps.
I'd also assume that the color calibration / (maybe even raw?) is done with their Camera-Tuner App, so that might be related as well.
Thought about swapping the libs with the xiaomi ones as well once we get a full rom of that phone. Gotta wait and see

Also worth trying this, to see if at least we can get the raw 200Mpx data for manual settings where 50 is max
by:
1.- Edit the file (with a magisk module) camxoverridesettings.txt at vendor/etc/camera and add this line at the end:
reprocessDump=TRUE
2.- Then once you take any picture in othere phones files will be generated at ./data/vendor/camera with the full raw stuff.
But with this phone it is not working, mb the camxoverridesettings.txt goes in other location in this phone

Just tested with the camxoverridesettings.xml from the Xiaomi 12t pro and it definitely replaces the file.
I also tried to replace the samsung hp1 libs from vendor/lib and vendor/lib64 with the ones from the xiaomi but they all crash the camera once installed.

Today last version: 9.0.30.81
Myui(CN) app store...

cascade128 said:
Today last version: 9.0.30.81
Myui(CN) app store...
Click to expand...
Click to collapse
thanks @cascade128 can you please post the apk?

TF1920 said:
thanks @cascade128 can you please post the apk?
Click to expand...
Click to collapse
I'm using the Eu version, i saw the news on the telegram channel, there was no apk.

cascade128 said:
I'm using the Eu version, i saw the news on the telegram channel, there was no apk.
Click to expand...
Click to collapse
No problem got it (here for 7days) https://www.transfernow.net/dl/20221025ogixGBWF
btw no new stuff visible, still no manual mode for 200Mpx

TF1920 said:
No problem got it (here for 7days) https://www.transfernow.net/dl/20221025ogixGBWF
btw no new stuff visible, still no manual mode for 200Mpx
Click to expand...
Click to collapse
I can't understand this Motorola's problem or purpose

cascade128 said:
I can't understand this Motorola's problem or purpose
Click to expand...
Click to collapse
don't know will need to see how Xiaomi 12X Pro goes since it is the same cam