Hey so, when I launch nethunter then start chroot the HID interface doesn't get detected, it just says HID Interface not found
When I try to open Duckhunter HID and launch the attack it says Something went wrong with the permission of /dev/hidg*
I've gone to the terminal and written cd dev/hidg*
Then it said that hidg* wasn't found
how do I fix this?
EDllT said:
Hey so, when I launch nethunter then start chroot the HID interface doesn't get detected, it just says HID Interface not found
When I try to open Duckhunter HID and launch the attack it says Something went wrong with the permission of /dev/hidg*
I've gone to the terminal and written cd dev/hidg*
Then it said that hidg* wasn't found
how do I fix this?
Click to expand...
Click to collapse
In order to fix it I had to goto USB Arsenal disable ADB and change the usb type to HID
EDllT said:
In order to fix it I had to goto USB Arsenal disable ADB and change the usb type to HID
Click to expand...
Click to collapse
Thank You so much for posting how you fixed your USB issue even though no one replied. I was having the same problem and spent probably 3 hours over the last week Googling it.
This worked for me also! Thank you again. I'm on a Note 10 N970U if anyone is wondering.
Gregbmil1 said:
Thank You so much for posting how you fixed your USB issue even though no one replied. I was having the same problem and spent probably 3 hours over the last week Googling it.
This worked for me also! Thank you again. I'm on a Note 10 N970U if anyone is wondering.
Click to expand...
Click to collapse
hid working on Galaxy note 10? I have Note 9 and not working. We try everything about fix but nothing works. Can you give me your steps for fix it please?
Galaxy note 9
Lineage 17.6
anastasiszn said:
hid working on Galaxy note 10? I have Note 9 and not working. We try everything about fix but nothing works. Can you give me your steps for fix it please?
Galaxy note 9
Lineage 17.6
Click to expand...
Click to collapse
I think the trick is to disable adb in the USB Arsenal section and make sure you tap the "Set USB Function" towards the bottom to save it. I would assume if it works for Note 10 Snapdragon it would on Note 9 on Lineage. I'm on modified stock. It's very lightly modified to as far as I can tell.
Gregbmil1 said:
I think the trick is to disable adb in the USB Arsenal section and make sure you tap the "Set USB Function" towards the bottom to save it. I would assume if it works for Note 10 Snapdragon it would on Note 9 on Lineage. I'm on modified stock. It's very lightly modified to as far as I can tell.
Click to expand...
Click to collapse
I can't disable because it's already disable by default and can't enable on usb Arsenal option. I have exynos device.
anastasiszn said:
I can't disable because it's already disable by default and can't enable on usb Arsenal option. I have exynos device.
Click to expand...
Click to collapse
Hmmm....... Do you get a "USB set successfully" message if you change the USB setting to hid or mass storage or any other of the options?
Gregbmil1 said:
Hmmm....... Do you get a "USB set successfully" message if you change the USB setting to hid or mass storage or any other of the options?
Click to expand...
Click to collapse
Yes it's OK. In your device F_HID is YES?
anastasiszn said:
Yes it's OK. In your device F_HID is YES?
Click to expand...
Click to collapse
Funny, I had that same app already installed . But yes F_hid is "yes" I wonder what "F" stands for
Gregbmil1 said:
Funny, I had that same app already installed . But yes F_hid is "yes" I wonder what "F" stands for
Click to expand...
Click to collapse
When hid set to yes, force close nethunter app after set functions enable. Its a madness...
Gregbmil1 said:
Funny, I had that same app already installed . But yes F_hid is "yes" I wonder what "F" stands for
Click to expand...
Click to collapse
Can you send me your
Gregbmil1 said:
Funny, I had that same app already installed . But yes F_hid is "yes" I wonder what "F" stands for
Click to expand...
Click to collapse
Fix it after 4 years with this command.
mknod --mode=666 /dev/hidg0 c 240 0 && mknod --mode=666 /dev/hidg1 c 240 1 && dmesg | grep hidg
anastasiszn said:
When hid set to yes, force close nethunter app after set functions enable. Its a madness...
Can you send me your
Fix it after 4 years with this command.
mknod --mode=666 /dev/hidg0 c 240 0 && mknod --mode=666 /dev/hidg1 c 240 1 && dmesg | grep hidg
Click to expand...
Click to collapse
Thank You, that seemed to have worked. I wish I knew what the code means but it worked, lol. mknod is new to me
Gregbmil1 said:
Thank You, that seemed to have worked. I wish I knew what the code means but it worked, lol. mknod is new to me
Click to expand...
Click to collapse
which is your kernel topic?
anastasiszn said:
which is your kernel topic?
Click to expand...
Click to collapse
I don't know much about kernels but I'm pretty sure it's stock. Is that impossible if I have root? Lol. I've had 3 rooted phones in my life. All have been Samsung. S7, S8, and Note 10. The Note 10 is my first unlocked bootloader. I have not had the option to change kernels as far as I know so I never really looked into kernels.
The code you posted works great by the way, thanks again. I saved it because after a reboot HID Status goes back to default.
Check out the screenshot for my kernel details
Gregbmil1 said:
I don't know much about kernels but I'm pretty sure it's stock. Is that impossible if I have root? Lol. I've had 3 rooted phones in my life. All have been Samsung. S7, S8, and Note 10. The Note 10 is my first unlocked bootloader. I have not had the option to change kernels as far as I know so I never really looked into kernels.
The code you posted works great by the way, thanks again. I saved it because after a reboot HID Status goes back to default.
Check out the screenshot for my kernel details
Click to expand...
Click to collapse
send me your kernels link? its impossible to activate hid without custom kernel. you use nh kernel.
anastasiszn said:
send me your kernels link? its impossible to activate hid without custom kernel. you use nh kernel.
Click to expand...
Click to collapse
Kernel link? You mean the link to download the kernel I'm using? I really don't know, I just flashed a rom and it was a done deal.
anastasiszn said:
send me your kernels link? its impossible to activate hid without custom kernel. you use nh kernel.
Click to expand...
Click to collapse
Kerbal links? You mean the nh version? I installed about the only ROM available for my phone
ROM
BKLYN_NOTE10_ROM_V2.0.1.zip | by bklyn_syed for Galaxy Note 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
NetHunter is just the "Generic Arm64" version
Gregbmil1 said:
Kernel link? You mean the link to download the kernel I'm using? I really don't know, I just flashed a rom and it was a done deal.
Kerbal links? You mean the nh version? I installed about the only ROM available for my phone
ROM
BKLYN_NOTE10_ROM_V2.0.1.zip | by bklyn_syed for Galaxy Note 10
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
NetHunter is just the "Generic Arm64" version
Click to expand...
Click to collapse
Nice. You have exynos or snapdragon?
anastasiszn said:
Nice. You have exynos or snapdragon?
Click to expand...
Click to collapse
Snapdragon, I've always had snapdragon with the added bonus of an unlockable bootloader, lol. Until my Note 10 but there are not many of us. I'm guessing because it costs $60 to $100 to have it unlocked. So there is not much demand for Galaxy Note 10 kernels and roms.
Gregbmil1 said:
Snapdragon, I've always had snapdragon with the added bonus of an unlockable bootloader, lol. Until my Note 10 but there are not many of us. I'm guessing because it costs $60 to $100 to have it unlocked. So there is not much demand for Galaxy Note 10 kernels and roms.
Click to expand...
Click to collapse
Really really lucky
anastasiszn said:
Really really lucky
Click to expand...
Click to collapse
I said unlockable, what I meant to say was permanently locked bootloader, lol. My Note 10 is my first unlocked bootloader and it's great. I've had root on S7 and S8 but with locked bootloader. Sucks my screen is cracked on my Note 10 though. I also lost the stylus like a year ago, lol. I'm thinking about replacing the screen myself sometime soon
I think the $100 I paid to have it unlocked was worth it really. I regret nothing, lol.
Gregbmil1 said:
I said unlockable, what I meant to say was permanently locked bootloader, lol. My Note 10 is my first unlocked bootloader and it's great. I've had root on S7 and S8 but with locked bootloader. Sucks my screen is cracked on my Note 10 though. I also lost the stylus like a year ago, lol. I'm thinking about replacing the screen myself sometime soon
I think the $100 I paid to have it unlocked was worth it really. I regret nothing, lol.
Click to expand...
Click to collapse
No need pay for unlock bootloader
Related
Root method for AOF8 / 5.1.1 for the SM-G530T THIS WILL TRIP KNOX. If you don't want to trip knox don't use this. If you do use it and whine you tripped knox because you didn't read ,we will all point and laugh at you.
Named it TrapKernel because well its not my normal HispAsian Kernel and I listened to a crap ton of Trap Music while doing it.
Thanks to @g.lewarne and his root method with his Unibase and Unikernel for the s6 , we finally have root after I ported it over to us. So be sure to thank him for his work.
What's included:
Auto installation of root and busy box
Kernel set to permissive
Otherwise stock
So here's the deal. Stupid simple.
1. Put Phone in Download mode
2. Open Odin
3. Connect Phone
4. Put Kernel in AP Slot
5.Flash it
6. Reboot and profit
Notes:
Download SuperSu from the Playstore. Its not included.
If it doesnt boot on first boot, pull the battery and reboot
Download
Do NOT mirror this link. Period.
TrapKernel AOF8
Special thanks to:
@g.lewarne for the obvious reason of being awesome and his root method for the s6.
@ajp87 for testing multiple tests
@Chainfire for SuperSU
Heres the source set to permissive for anyone that want to fork it and build a kernel that'll allow root:
Permissive Kernel Source for the G530T
I just tried this and ODIN failed to flash. Is there some trick to make it go through?
Fiasco said:
I just tried this and ODIN failed to flash. Is there some trick to make it go through?
Click to expand...
Click to collapse
By fail it did what
seem to be working on the g530w thanks man.....
make sure u turn on oem unlock in developer setting
ShinySide said:
By fail it did what
Click to expand...
Click to collapse
Here's the screenshot I took. Sorry for the delay, I was working.
EDIT: OEM unlock was turned off. Worked this time. Thanks!!
Since I'm just flashing a kernel it won't wipe the phone right? Thanks a bunch for this!
sevenpioverthree said:
Since I'm just flashing a kernel it won't wipe the phone right? Thanks a bunch for this!
Click to expand...
Click to collapse
No it won't
Also used on a G530W with OEM Unlock enabled, 5.1.1 Thanks a lot!
ShinySide said:
Root method for AOF8 / 5.1.1 for the SM-G530T THIS WILL TRIP KNOX. If you don't want to trip knox don't use this. If you do use it and whine you tripped knox because you didn't read ,we will all point and laugh at you.
Named it TrapKernel because well its not my normal HispAsian Kernel and I listened to a crap ton of Trap Music while doing it.
Thanks to @g.lewarne and his root method with his Unibase and Unikernel for the s6 , we finally have root after I ported it over to us. So be sure to thank him for his work.
What's included:
Auto installation of root and busy box
Kernel set to permissive
Otherwise stock
So here's the deal. Stupid simple.
1. Put Phone in Download mode
2. Open Odin
3. Connect Phone
4. Put Kernel in AP Slot
5.Flash it
6. Reboot and profit
Notes:
Download SuperSu from the Playstore. Its not included.
If it doesnt boot on first boot, pull the battery and reboot
Download
Do NOT mirror this link. Period.
TrapKernel AOF8
Special thanks to:
@g.lewarne for the obvious reason of being awesome and his root method for the s6.
@ajp87 for testing multiple tests
@Chainfire for SuperSU
Click to expand...
Click to collapse
Wait! You've made a kernel/root for the grand prime too?
Does it function the same way as the core prime?
if so, you're a godsend!
I've always wanted the grand prime (after i saw my sister taunting me while she took selfies and video with the device.)
I was able to root hers (Since it was the CricKet model) but i always wanted to get the grand (T-mobile version) and root it.
TheDerekHarper said:
Wait! You've made a kernel/root for the grand prime too?
Does it function the same way as the core prime?
if so, you're a godsend!
I've always wanted the grand prime (after i saw my sister taunting me while she took selfies and video with the device.)
I was able to root hers (Since it was the CricKet model) but i always wanted to get the grand (T-mobile version) and root it.
Click to expand...
Click to collapse
Yeah same exact thing as the 360t1
ShinySide said:
Yeah same exact thing as the 360t1
Click to expand...
Click to collapse
No have no idea how much i love you for this right now.
Then show love with a donation..
Soooooo, does it work for the Galaxy Grand Prime Tmo variant or not?
GeEazy said:
Soooooo, does it work for the Galaxy Grand Prime Tmo variant or not?
Click to expand...
Click to collapse
The SM-G530T is the T-Mobile variant, is it not, and on LP 5.1.1
sent by my: SM-G531M-57 Grand Prime (or) my: SM-N910C Note 4 (Lollipop 5.1.1)
NWKENT said:
The SM-G530T is the T-Mobile variant, is it not.?
sent by my: SM-G531M-57 Grand Prime (or) my: SM-N910C Note 4 (Lollipop 5.1.1)
Click to expand...
Click to collapse
Look here smart ass, another T-Mobile Grand Prime owner said it failed. so just in case you've missed that post, go back and read it. prick
Edit: I missed his "Edit" OEM Unlock wasn't enabled.
GeEazy said:
Look here smart ass, another T-Mobile Grand Prime owner said it failed. so just in case you've missed that post, go back and read it. prick
Edit: I missed his "Edit" OEM Unlock wasn't enabled.
Click to expand...
Click to collapse
Actually, he was legitimately asking the question. Because just like me he doesnt own this particular variant. Well actually I dont even own a Grand prime at all. So if you want to be a prick you can go do it in another thread or in a PM and not disrespect users in the thread I gave you root in.
ShinySide said:
Actually, he was legitimately asking the question. Because just like me he doesnt own this particular variant. Well actually I dont even own a Grand prime at all. So if you want to be a prick you can go do it in another thread or in a PM and not disrespect users in the thread I gave you root in.
Click to expand...
Click to collapse
we already squashed it in PM. I took what he said as sarcasm instead of an actual question.
Thanks for your share. :good::laugh:
Open Source Sound Control Code?
Hey, love the kernel and have tweaked it using SetCPU. I was curious however is there is any way to enable support for Faux Sound by patching the Open Source Sound Control Code? This would enable us to get more volume out of this beast!
Advertize said:
Hey, love the kernel and have tweaked it using SetCPU. I was curious however is there is any way to enable support for Faux Sound by patching the Open Source Sound Control Code? This would enable us to get more volume out of this beast!
Click to expand...
Click to collapse
There's zero features to this kernel. I didn't add anything. And that'd be the kernel source. Is there a way, yes. But I don't own the device so am I going to do it? Probably not
Good News for the Xiaomi Redmi 4 Prime/Pro User, We got an official Global Rom for our Device.
Code:
This ROM is not for Redmi 4 and Redmi 4A this is only For
Redmi 4 Prime/Pro
MIUI 8 Stable Global Version Recovery ROMMIUI V8.1.2.0.MBEMIDI0.zip
MIUI V8.2.1.0.MBEMIDL.zip Global Stable Recovery ROM
MIUI V8.2.4.0.MBEMIDL.zip Global Stable Recovery ROM
Miui_V8.5.3.0.MBEMIED Global Stable Recovery.zip
MIUI 8 FASTBOOT ROM
Fastboot ROM 6.12.29.tgz
Fastboot ROM 8.12.0.tgz
Markw_global_images_V8.5.3.0.MBEMIED.tgz
MIUI 9 China Developer ROMRecovery ROM
Miui_HM4Pro_7.9.21.zip
MIUI 9 FastBoot ROM
Markw_images_7.9.21.tgz
Supported Languages are in the Screen Shots:
It was about time, i still couldn't arrange for a windows machine to unlock mine, why is the support on linux so bad... :/
qaz.xc said:
It was about time, i still couldn't arrange for a windows machine to unlock mine, why is the support on linux so bad... :/
Click to expand...
Click to collapse
ah come on, you can use Linux and Windows on the same Machine at the same time. so you bother to move the whole system to a single OS. Even on my laptop i am using Both Linux and Windows 7.
SAFI_AFRIDI said:
ah come on, you can use Linux and Windows on the same Machine at the same time. so you bother to move the whole system to a single OS. Even on my laptop i am using Both Linux and Windows 7.
Click to expand...
Click to collapse
But that would force me to format my current system first, which i'm not yet read to do.
And also, it would be much easier if i wasn't running a celeron on a laptop with 2GB ram
qaz.xc said:
But that would force me to format my current system first, which i'm not yet read to do.
And also, it would be much easier if i wasn't running a celeron on a laptop with 2GB ram
Click to expand...
Click to collapse
well as you wish but the good thing in linux is that you can run it from a USB device too. and for your System
SAFI_AFRIDI said:
well as you wish but the good thing in linux is that you can run it from a USB device too. and for your System
Click to expand...
Click to collapse
I know that, i'm running as my main system though, for me to install windows i'd have to format my HDD which i only have 1 inside the laptop, either i get usb-sata adaptor that's better than what i have right now or my only option is to format to install linux + windows, however.. on a tight budget and specs 500GB might not be enough for me.
So... a friend's computer it is for the meantime
My phone runs smoother than my pc.
Hi guys, has anyone tried xposed on this rom? I'd like to install it on my phone, but it was bricked for like 10 days, and I don't want it to be in bootloop again... Thanks.
ardrift said:
Hi guys, has anyone tried xposed on this rom? I'd like to install it on my phone, but it was bricked for like 10 days, and I don't want it to be in bootloop again... Thanks.
Click to expand...
Click to collapse
Due to the same Risk, Till now i have not Try it on This Phone but before i will have to Read some Articles and then i will be able to reply you man.
SAFI_AFRIDI said:
Due to the same Risk, Till now i have not Try it on This Phone but before i will have to Read some Articles and then i will be able to reply you man.
Click to expand...
Click to collapse
I have successfully installed xposed v87 arm64 miui edition on miui global stable 8.1.2.0, it works without any errors.
Link Please
ardrift said:
I have successfully installed xposed v87 arm64 miui edition on miui global stable 8.1.2.0, it works without any errors.
Click to expand...
Click to collapse
I use to try too much time but i got an error that Xpose Installed but couldn't Start. so please share a link of the Xposed files.
SAFI_AFRIDI said:
I use to try too much time but i got an error that Xpose Installed but couldn't Start. so please share a link of the Xposed files.
Click to expand...
Click to collapse
solarwarez version
SAFI_AFRIDI said:
I use to try too much time but i got an error that Xpose Installed but couldn't Start. so please share a link of the Xposed files.
Click to expand...
Click to collapse
I have uploaded the files to google drive. First you have to install the apk, then you can download the zip from the app, or just flash the zip that I've included in the folder. It's the same as If you downloaded the latest miui version from the app.
That's good news I can use xposed on the red prime, used with many samsung, though not understand how you install on prime.. Can you PLEASE kindly explain in easy baby language. I see on the google drive there are 2 files, do I flash or install them via twrp? Or install anther way? Please explain how. Thanks so much.
SAFI_AFRIDI said:
Due to the same Risk, Till now i have not Try it on This Phone but before i will have to Read some Articles and then i will be able to reply you man.
Click to expand...
Click to collapse
I trying to find safe answers to adding xposed to red 4 prime, though not too much info' as yet re' xposed. Guess it's early days. There is some info' though not sure how safe it is....Not too much info' on the internet about this (yet) (=
Raggamuffin17 said:
I trying to find safe answers to adding xposed to red 4 prime, though not too much info' as yet re' xposed. Guess it's early days. There is some info' though not sure how safe it is....Not too much info' on the internet about this (yet) (=
Click to expand...
Click to collapse
It is safe to install xposed on the Redmi 4 Prime, mine is running official global 8.1.2.0, and it works without any problems (xposed miui arm64 version)
ardrift said:
It is safe to install xposed on the Redmi 4 Prime, mine is running official global 8.1.2.0, and it works without any problems (xposed miui arm64 version)
Click to expand...
Click to collapse
Thanks Ardrift, from which links/info' did you use for this successful method please?
Raggamuffin17 said:
Thanks Ardrift, from which links/info' did you use for this successful method please?
Click to expand...
Click to collapse
I have just tried it out by myself, so I installed the .apk file (xposed installer) and then you could select the appropriate version and architecture from the available versions in the app (miui, arm64). I uploaded the files (if you don't want to search for the zip in the application then you could just install the apk and flash the zip) in my google drive. Here's the link https://drive.google.com/folderview?id=0B9SW1On-CcCac09VTzd5TW5kcnc
Global Stable V8.2.1.0.MBEMIDL for Redmi 4 Prime Released!
LahiruTarz said:
Global Stable V8.2.1.0.MBEMIDL for Redmi 4 Prime Released!
Click to expand...
Click to collapse
There are some known issues:
Some users are experiencing battery drain
Bad quality sound of voice recording and video recording
Based on An Tu Tu reports, 2 cores of the CPU isn't working [with performance drop]
Some users are experiencing poor signal
Internet with mobile data seems not working on some users
Any first hand reports on theses?
Raggamuffin17 said:
There are some known issues:
Some users are experiencing battery drain
Bad quality sound of voice recording and video recording
Based on An Tu Tu reports, 2 cores of the CPU isn't working [with performance drop]
Some users are experiencing poor signal
Internet with mobile data seems not working on some users
Any first hand reports on theses?
Click to expand...
Click to collapse
I can comment on battery life being a bit less powerful then it was on 8.1.2.0... I can't comment on the others, I don't experience significant performance weakness, neither the signal being poor. I don't use mobile data.
EFIDroid coming to Redmi 2 Prime, very soon.
Here's some pre-reading : XDA Spotlight
Original thread
Are you guyz ready?
iamsubhranil said:
EFIDroid coming to Redmi 2 Prime, very soon.
Here's some pre-reading : XDA Spotlight
Original thread
Are you guyz ready?
Click to expand...
Click to collapse
Yo! Ready here
iamsubhranil said:
EFIDroid coming to Redmi 2 Prime, very soon.
Here's some pre-reading : XDA Spotlight
Original thread
Are you guyz ready?
Click to expand...
Click to collapse
UEFI bootloader on redmi 2? what a great time to live!
awesome, can't wait for it
So, GRUB for Redmi 2? Awesome, you gotta love this device!
wow ＼(◎o◎)／
Can anyone please explain this post ? I'm a noob so don't getting it. ?
deeps7515 said:
Can anyone please explain this post ? I'm a noob so don't getting it. ?
Click to expand...
Click to collapse
Me too
iamsubhranil said:
EFIDroid coming to Redmi 2 Prime, very soon.
Here's some pre-reading : XDA Spotlight
Original thread
Are you guyz ready?
Click to expand...
Click to collapse
yeah, ready
deeps7515 said:
Can anyone please explain this post ? I'm a noob so don't getting it.
Click to expand...
Click to collapse
preetnoobie said:
Me too
Click to expand...
Click to collapse
Simply speaking ,it is a bootloader replacement(or a modified bootloader) by which u can install multiple ROMs and recoveries at same time.U can run a miui ROM,aosp rom,Ubuntu Linux and u don't need any patched kernel or a multirom recovery or multirom supported rom .And no need of confirmation if a ROM can be booted as secondary or primary ROM as there is no terms like that.
@deeps7515 @preetnoobie
Bootloader is the first thing that get loaded in the memory after the device starts. Once the bootloader gets loaded in the memory, it handles OS initialization, and the OS initiates only after that point.
The goal of this project is to generify the process of bootloading, so that any ROM or any kernel can be loaded into memory without any kind of modification at all, through some universal architechture. The technical details are vast enough and quite frankly, even I don't understand many of that.
TL;DR
It will make multibooting buttery smooth in our devices.
if i am not wrong .. now we can also install complete armhf based linux distros??
iamsubhranil said:
@deeps7515 @preetnoobie
Bootloader is the first thing that get loaded in the memory after the device starts. Once the bootloader gets loaded in the memory, it handles OS initialization, and the OS initiates only after that point.
The goal of this project is to generify the process of bootloading, so that any ROM or any kernel can be loaded into memory without any kind of modification at all, through some universal architechture. The technical details are vast enough and quite frankly, even I don't understand many of that.
TL;DR
It will make multibooting buttery smooth in our devices.
Click to expand...
Click to collapse
Thanks for help. I got that idea. Eagerly waiting for it.
raymond_bqg said:
Simply speaking ,it is a bootloader replacement(or a modified bootloader) by which u can install multiple ROMs and recoveries at same time.U can run a miui ROM,aosp rom,Ubuntu Linux and u don't need any patched kernel or a multirom recovery or multirom supported rom .And no need of confirmation if a ROM can be booted as secondary or primary ROM as there is no terms like that.
Click to expand...
Click to collapse
Wow !!
iamsubhranil said:
EFIDroid coming to Redmi 2 Prime, very soon.
Here's some pre-reading : XDA Spotlight
Original thread
Are you guyz ready?
Click to expand...
Click to collapse
Only prime?
DarkXonline said:
Only prime?
Click to expand...
Click to collapse
All variant....I think.... bcz all have snapdragon.
This would mean Sailfish can boot without modifications and possibly without breaking primary ROM. Exciting stuff
abhishek 9650 said:
if i am not wrong .. now we can also install complete armhf based linux distros??
Click to expand...
Click to collapse
Yup you got the idea quite well.
taalojarvi said:
This would mean Sailfish can boot without modifications and possibly without breaking primary ROM. Exciting stuff
Click to expand...
Click to collapse
Well sadly, sailfish still requires some work to be done because of the hardcoded system.mount, and I directly jump into it after I publish the first beta. Right now, I'm experiencing some weird bug that apparantly noone has faced before, and that's why the build is taking longer than expected.
Stay tuned.
Excited.. :laugh:
Hi There Everyone!First a brief: I've been a longtime XDA user, but never found the need to create an account. Now, I bought a Redmi 6 and I'm really disappointed by the development:crying:, so I thought i'd chip in a bit I don't have permission yet, so I posted this here.
As you know, till now there are NO Custom ROM's available. This is really sad, and I can't live with MIUI. So I decided to give GSI (Generic System Image) ROM's a try.
And guess what? They work! I tried installing Lineage OS 15.1 on our cereus. The rom is really fast and smooth. Here's what I found:
Working:
Wifi
Bt
Camera
Vibration
Sound
Finger Print
Bugs:
SIM detected, but no range found. RIP calls/sms/data. Looks like a problem with the raido's.
Headphones don't work
I couldn't test hotspot and gps.
Even though there is a bad bug, it still works surprisingly on this MediaTek SoC with no drivers / kernels. All we need is a little paching and we should be good to go!
Give it a try. Ill post guide on how to do this later. For now, i'm using miui cuz i wanna make phone calls
Here are screenshots:
https://ibb.co/J7FRk9K
https://ibb.co/sbNk3N4
https://ibb.co/K5KDW43
https://ibb.co/5Mfrz0d
https://ibb.co/kHCwqb2
https://ibb.co/S3X9gkv
https://ibb.co/1JYNmqp
Yes, we know. We tested this long time ago, there are pretty long discussions in twrp thread comments
What about finger print reader?
TanRayCz said:
Yes, we know. We tested this long time ago, there are pretty long discussions in twrp thread comments
Click to expand...
Click to collapse
I know, and I've read through all that. They are all buried inside TWRP threads, and not everyone knows about GSI. I made this so people know, and I'm also going to make an other thread with instructions on how to flash a GSI rom for our Redmi 6 soon (It's a little tricky getting TWRp to work and all...)
hiitsrudd said:
What about finger print reader?
Click to expand...
Click to collapse
It works! Sorry, I forgot to mention that - added it now :good: Btw, even though it works, it isn't as accurate and as fast as MIUI.
Tech_Expert said:
I know, and I've read through all that. They are all buried inside TWRP threads, and not everyone knows about GSI. I made this so people know, and I'm also going to make an other thread with instructions on how to flash a GSI rom for our Redmi 6 soon (It's a little tricky getting TWRp to work and all...)
Click to expand...
Click to collapse
I meant to say good job about putting this all together. Nice.
I just randomly remembered when i was trying this ROM some time ago. Headphones doesn't work.
(Adding this to post would be ideal)
Edit: It could also be the Pixel Experience ROM. But i don't remember.
TanRayCz said:
I just randomly remembered when i was trying this ROM some time ago. Headphones doesn't work.
(Adding this to post would be ideal)
Edit: It could also be the Pixel Experience ROM. But i don't remember.
Click to expand...
Click to collapse
Thanks! I tried LOS again, and I can confirm that headphones don't work. Added that to the post:good: Btw, do you know any GSI ROMs for Cereus that can actually make calls and work well?
Tech_Expert said:
Thanks! I tried LOS again, and I can confirm that headphones don't work. Added that to the post:good: Btw, do you know any GSI ROMs for Cereus that can actually make calls and work well?
Click to expand...
Click to collapse
All i tried was LOS and Pixel Eperience. Both are same, except PE has Android 9.0. I tried treble RR, it had really cool logo while booting, and i was really excited for RR because i never tried it. But i never made it to boot. Boot logo is looping infinitely and i tried fresh installing (With MiFlash clear) about 10 times.
Edit: Maybe if you would want to, you can give it a try https://forum.xda-developers.com/pr...0-resurrection-remix-v7-0-arm64-32-b-t3891636
Edit: I didn't understand most of it, but i could start adb logcat while booting. From all i could understand, all apps were dying and restarting all over.
https://drive.google.com/file/d/1KSfa8BcgQtEdnHQnbQ8mhGx_rDHSDD7t/view
Omni rom, android 9, works pretty good, no major bugs.
Installation instructions on screenshot in attachments.
[email protected] said:
https://drive.google.com/file/d/1KSfa8BcgQtEdnHQnbQ8mhGx_rDHSDD7t/view
Omni rom, android 9, works pretty good, no major bugs.
Installation instructions on screenshot in attachments.
Click to expand...
Click to collapse
That's nice and all, but more info would be cool. SIM works?
TanRayCz said:
That's nice and all, but more info would be cool. SIM works?
Click to expand...
Click to collapse
Yep, only USSD is broken by default. See 11) on screenshot.
Calls/sms works out of box.
Don't know about volte since my carrier doesn't support it.
[email protected] said:
Yep, only USSD is broken by default. See 11) on screenshot.
Calls/sms works out of box.
Don't know about volte since my carrier doesn't support it.
Click to expand...
Click to collapse
Speaking of, what does append persist.sys.radio.ussd.fix=true to /system/build.prop mean?
Sorry if it's something widely know im kind of a noob.
JosifBoga666 said:
Speaking of, what does append persist.sys.radio.ussd.fix=true to /system/build.prop mean?
Sorry if it's something widely know im kind of a noob.
Click to expand...
Click to collapse
Seems that mtk ussd fix breaks something on other phones. So, this is flag to enable it.
------
Ahh, you mean how to append?
Open /system/build.prop file with text editor that has root access, add line to end, save file, reboot.
Or you can do this via adb/terminal emulator:
1) su
2) echo persist.sys.radio.ussd.fix=true >> /system/build.prop
[email protected] said:
Seems that mtk ussd fix breaks something on other phones. So, this is flag to enable it.
------
Ahh, you mean how to append?
Open /system/build.prop file with text editor that has root access, add line to end, save file, reboot.
Or you can do this via adb/terminal emulator:
1) su
2) echo persist.sys.radio.ussd.fix=true >> /system/build.prop
Click to expand...
Click to collapse
But this doesn't fix ussd right?
JosifBoga666 said:
But this doesn't fix ussd right?
Click to expand...
Click to collapse
I haven't tested this, but why do you think so?
[email protected] said:
I haven't tested this, but why do you think so?
Click to expand...
Click to collapse
Since you said ussd is broken by default i thought that that wouldn't fix it.
JosifBoga666 said:
Since you said ussd is broken by default i thought that that wouldn't fix it.
Click to expand...
Click to collapse
By default — right after installing, without adding this line.
[email protected] said:
By default — right after installing, without adding this line.
Click to expand...
Click to collapse
Oh my bad. By the way I'm going to install this rom and I'll see if that line fixes ussd. Then we'll have a probably fully functional rom for the redmi 6. ****ing finally. It's about time.
JosifBoga666 said:
Oh my bad. By the way I'm going to install this rom and I'll see if that line fixes ussd. Then we'll have a probably fully functional rom for the redmi 6. ****ing finally. It's about time.
Click to expand...
Click to collapse
It doesn't work for me. Same as every single other GSI rom.
Can I will back a pixel 5 from Android 11 to Android 9 so I may edit the build.prop file. I have tried the suggestions on the site using various apps but none seemed to work
jake9401 said:
Can I will back a pixel 5 from Android 11 to Android 9 so I may edit the build.prop file. I have tried the suggestions on the site using various apps but none seemed to work
Click to expand...
Click to collapse
Lol no. No you can't. Why would you buy a pixel 5 just to roll it back to an outdated OS?? Makes zero sense
jake9401 said:
Can I will back a pixel 5 from Android 11 to Android 9 so I may edit the build.prop file. I have tried the suggestions on the site using various apps but none seemed to work
Click to expand...
Click to collapse
There's no Android 9 for pixel 5 11 only
jaythenut said:
There's no Android 9 for pixel 5 11 only
Click to expand...
Click to collapse
Not 11 only lol. Developers preview of Android 12 as well, which I am on right now.
jake9401 said:
Can I will back a pixel 5 from Android 11 to Android 9 so I may edit the build.prop file. I have tried the suggestions on the site using various apps but none seemed to work
Click to expand...
Click to collapse
You should be able to edit the build.prop on 11 too. I haven't done it yet, and I'm just getting ready to go to work so I can't test, but this is the first I've ever heard of not being able to and I think you are mistaken. With root you should be able to edit it.
jake9401 said:
Can I will back a pixel 5 from Android 11 to Android 9 so I may edit the build.prop file. I have tried the suggestions on the site using various apps but none seemed to work
Click to expand...
Click to collapse
Why not simply use MagiskHideProps? It will let you set any property you wish.
l7777 said:
Why not simply use MagiskHideProps? It will let you set any property you wish.
Click to expand...
Click to collapse
I tried using the Magiskhideaprops and it just won't take the change, unless I'm doing it wrong.
thatsupnow said:
Lol no. No you can't. Why would you buy a pixel 5 just to roll it back to an outdated OS?? Makes zero sense
Click to expand...
Click to collapse
Because I really need. My hotspot open, I was a Christmas gift and I didn't realize you can't edit the build prop in Android 11
xunholyx said:
You should be able to edit the build.prop on 11 too. I haven't done it yet, and I'm just getting ready to go to work so I can't test, but this is the first I've ever heard of not being able to and I think you are mistaken. With root you should be able to edit it.
Click to expand...
Click to collapse
Please let me know if it works for you
jake9401 said:
Please let me know if it works for you
Click to expand...
Click to collapse
Be aware, directly editing it will make it impossible to pass safetynet checks if you use any apps that check it. My understanding is that MagiskHideProps modifies the file dynamically so that safetynet can still pass. What edit were you trying to make that didn't work? This section of the MagiskHideProps references setting custom properties.
l7777 said:
Be aware, directly editing it will make it impossible to pass safetynet checks if you use any apps that check it. My understanding is that MagiskHideProps modifies the file dynamically so that safetynet can still pass. What edit were you trying to make that didn't work? This section of the MagiskHideProps references setting custom properties.
Click to expand...
Click to collapse
It was Net.tethering.noprovisioning=true to enable my hotspot.
jake9401 said:
It was Net.tethering.noprovisioning=true to enable my hotspot.
Click to expand...
Click to collapse
Have you researched to see if that still works in Android 11 at all?
I have not, all the responses I've been getting keep telling me to use the Magisk-props-config but it never seems to implement the change. After I make the change and reboot I still can not enable my hot spot but when I go back into the module the change is still there, so I don't know what Im doing wrong or as your suggesting it just does not work.
jake9401 said:
I have not, all the responses I've been getting keep telling me to use the Magisk-props-config but it never seems to implement the change. After I make the change and reboot I still can not enable my hot spot but when I go back into the module the change is still there, so I don't know what Im doing wrong or as your suggesting it just does not work.
Click to expand...
Click to collapse
You may be operating under a false premise. You believe that if the prop is correct your hotspot will work. What if the prop is correct but does not work to enable the hotspot on Android 11? By all accounts, MagiskHideProps does work. You can check by running the getprop command in a terminal window.
Would it be the last entry in the long list of information? if so I do not see it. Also when creating the custom prop it asks for a value, what should I be giving it?
jake9401 said:
It was Net.tethering.noprovisioning=true to enable my hotspot.
Click to expand...
Click to collapse
jake9401 said:
Would it be the last entry in the long list of information? if so I do not see it. Also when creating the custom prop it asks for a value, what should I be giving it?
Click to expand...
Click to collapse
From your earlier note, net.tethering.noprovisioning is the property, true is the value.
Check it by using getprop from the command line. The below section of the MagiskHideProps reference is where you should start.
MagiskHidePropsConf/README.md at master · Magisk-Modules-Repo/MagiskHidePropsConf
This tool is now dead... Contribute to Magisk-Modules-Repo/MagiskHidePropsConf development by creating an account on GitHub.
github.com