Need Redmi Camera / Gcam for Android 11 Roms ! - Redmi Note 9 Questions & Answers

Hey.. I recently installed PixelUIExperience ( Android 11 ).... I just fell in love with the rom coming from miui 12.... I love everything except the camera.. the built in camera of the rom sucks... tried installing Gcam mods and redmi camera apps... They won't install on Android 11 build.. because they might be ported on v10.....
Can anyone help me with this ?

https://dl1-sponsored-by.indianets.net/anxmirror/185R.singularity/ANXCameraUnity_185R.SaltyIntelligentPlainsqueaker.zip
Install this in Magisk, can be installed by flashing in recovery too, wouldnt recommend doing in recovery tho. Reboot, Give all permissions to the app, Storage- All files, camera, microphone, etc. Otherwise it would just show a black screen.
And for the AUX cam to work, Change phone props to Pixel 5 by installing MagiskHide props module and running the following commands in termux-
Su
props
1
f
7
26
y
y
This will install the Pixel 5 fingerprint, after that reboot, and everything will be working.

hey.. the config module can't download

nasif12257 said:
hey.. the config module can't download
Click to expand...
Click to collapse

Thank you bro !

Related

ANX CAMERA installation for Android 11 based custom ROMS

REDMI NOTE 7 ANX CAMERA setup for Android 11 based custom ROMS.
--> TESTED Pixel Experience Official BETA - A11
--> Most modes work very well, except for the 48MP mode. Photo, Video, Portrait, AI, HDR etc.
INSTALLATION;
1) Download the files I gave from the links below.
2) Then flash these files over MAGİSK, and restart the device.
3) After the device restarts, manually grant all permissions without opening the ANX CAMERA app.
--> A warning will appear on the first boot. Say allow. the application will close. turn it back on. DONE.
You can now use ANX CAMERA app on Android 11 based custom ROMs.
--> The installation order doesn't matter, you can start from the file you want.
FILES
https://www.dosyaupload.com/cbde
https://www.dosyaupload.com/cbdj
ryukseloglu said:
REDMI NOTE 7 ANX CAMERA setup for Android 11 based custom ROMS.
--> TESTED Pixel Experience Official BETA - A11
--> Most modes work very well, except for the 48MP mode. Photo, Video, Portrait, AI, HDR etc.
INSTALLATION;
1) Download the files I gave from the links below.
2) Then flash these files over MAGİSK, and restart the device.
3) After the device restarts, manually grant all permissions without opening the ANX CAMERA app.
--> A warning will appear on the first boot. Say allow. the application will close. turn it back on. DONE.
You can now use ANX CAMERA app on Android 11 based custom ROMs.
--> The installation order doesn't matter, you can start from the file you want.
FILES
https://www.dosyaupload.com/cbde
https://www.dosyaupload.com/cbdj
Click to expand...
Click to collapse
Hey, I'm a Poco X3 pro user. And I installed Arrow Os a few days back. I'm wondering if I can install ANX Camera on Poco X3 (PRO). Because Gcam isn't performing that well. I'm waiting for your Response.
alihaider008 said:
Hey, I'm a Poco X3 pro user. And I installed Arrow Os a few days back. I'm wondering if I can install ANX Camera on Poco X3 (PRO). Because Gcam isn't performing that well. I'm waiting for your Response.
Click to expand...
Click to collapse
Go Here
ryukseloglu said:
Go Here
Click to expand...
Click to collapse
My phone is X3 (Pro)
alihaider008 said:
My phone is X3 (Pro)
Click to expand...
Click to collapse
Try
will this work on oneplus 8t, i have flashed evolutionx and magisk
I'm on ArrowOS 11, and in PRO mode, I have difficulties to tap S (shutter speed) and ISO.
# tapping on ISO sometimes lead me to zoom in the lens (like 2x in PHOTO mode), to correctly tap ISO, I need to tap on the right side of ISO text
# tapping on S (shutter speed) sometimes lead me to zoom out the lens (like 1x in PHOTO mode), to correctly tap S, I need to tap on the right side of S text
Anyone suffer the same issue like me? And is there another workaround to deal with it?
Hi
Is there any work to port mi 10t camera?
Redmi note 7 - 48mpx mod Pro - it doesn't work in this version either. this is the multiple version that doesn't work. Lineage and Android 11
padiyes said:
I'm on ArrowOS 11, and in PRO mode, I have difficulties to tap S (shutter speed) and ISO.
# tapping on ISO sometimes lead me to zoom in the lens (like 2x in PHOTO mode), to correctly tap ISO, I need to tap on the right side of ISO text
# tapping on S (shutter speed) sometimes lead me to zoom out the lens (like 1x in PHOTO mode), to correctly tap S, I need to tap on the right side of S text
Anyone suffer the same issue like me? And is there another workaround to deal with it?
Click to expand...
Click to collapse
solved in v190R, great work @AEonAX
ko33 said:
Redmi note 7 - 48mpx mod Pro - it doesn't work in this version either. this is the multiple version that doesn't work. Lineage and Android 11
Click to expand...
Click to collapse
Poco X3 - A11 ArrowOS can activate 64MP mode (with file size of 18MB) successfully. Try to install version 190R (By Noid - Full Version modded for R) and report the result here.
aliabadi97 said:
Is there any work to port mi 10t camera?
Click to expand...
Click to collapse
Have you tried to install version 190R (By Noid - Full Version modded for R)?
I am on Pixelexperience 11 plus, and il have anxcamera for R. Work great exept 48mp pics.
I have try 48MPFixR_202.FluidBoldEmu.zip, 201 and 200 but always not working...
Do you know if the problems can be solved ??
Actually the front camera have a better quality than the back camera (13mp vs 12mp)....
alexielle51 said:
I am on Pixelexperience 11 plus, and il have anxcamera for R. Work great exept 48mp pics.
I have try 48MPFixR_202.FluidBoldEmu.zip, 201 and 200 but always not working...
Do you know if the problems can be solved ??
Actually the front camera have a better quality than the back camera (13mp vs 12mp)....
Click to expand...
Click to collapse
Do I need root to install ANX Camera? I tried flashing it with OFRP but I didn't see any camera app!
I use magisk for install, and if bootloop with ofrp, in magisk option you can disable anx.
If you use the 190 r you have another package to install (
For 190R and later MIUI Core magisk module is required:
MOD EDIT: Link Removed )
The first time that i have try to install i have the same issue. Try to re install with magisk or orange fox and with the additional package. And may be root is needed
programs works great on Mi Mix 2S
I have installed with magisk and works fine, but when I tried to take a picture with the telegram native camera app freezes.
does anyone know how to solve it?
thanks for the work!
Does someone know how to install anx camera on Mi 11 lite (Courbet)?
Is there development for android 12?
Deleted member 7378898 said:
REDMI NOTE 7 ANX CAMERA setup for Android 11 based custom ROMS.
--> TESTED Pixel Experience Official BETA - A11
--> Most modes work very well, except for the 48MP mode. Photo, Video, Portrait, AI, HDR etc.
INSTALLATION;
1) Download the files I gave from the links below.
2) Then flash these files over MAGİSK, and restart the device.
3) After the device restarts, manually grant all permissions without opening the ANX CAMERA app.
--> A warning will appear on the first boot. Say allow. the application will close. turn it back on. DONE.
You can now use ANX CAMERA app on Android 11 based custom ROMs.
--> The installation order doesn't matter, you can start from the file you want.
FILES
https://www.dosyaupload.com/cbde
https://www.dosyaupload.com/cbdj
Click to expand...
Click to collapse
hello friend, I'm a redmi k40 pro user and I am currently running Android 12L evolution X rom on my phone and I'm thinking if I can install ANX Camera on redmi k40 pro. Because Gcam isn't working perfectly. I'm waiting for your Response

Question Installing ANX Cam on Arrow

Hi,
I'm trying to install ANX Cam on my Note 10 Pro with Arrow OS. So far, I couldn't find any good or working tutorial to do such a thing while from what I read on the threads, obviously, it's possible.
Can you help me with that ? Do you have a link to a good ressource ? Thanks
ANX is a magisk module, just download and install it as Magisk modules, it simple as that

[Magisk Module] Enable RAW capture for GCam

This Module enables RAW Capture on the Galaxy A30, and changes the camera Hardware Level from Limited to Full.
RAW Capture is required for most GCams to work.
For information about GCam, go to this thread. It's for the A20, but contains useful information.
Click to expand...
Click to collapse
How does it work?
It works by replacing the library located at /vendor/lib/libexynoscamera3.so with an edited one. For reverse engineering enthusiasts, here is the patch applied to the library.
Prerequisites
- Magisk v20.4 or newer
- Android 11 vendor and kernel (Not compatible with versions of the Eureka Kernel older than 9.0)
Installation
Install as a normal Magisk Module, through Magisk Manager or TWRP.
Troubleshooting
Camera doesn't work, shows Black Screen
Make sure you are using a compatible Android 11 kernel and vendor.
If this issue is happening after updating your firmware, please let me know.
Telegram
GitHub
Download
Does this work with aosp based roms? Or is it just one UI?
Borkode said:
Does this work with aosp based roms? Or is it just one UI?
Click to expand...
Click to collapse
Yes, it works with AOSP.
What kernel you recommend to use in gsi ROM with this module?
SirKosichka said:
What kernel you recommend to use in gsi ROM with this module?
Click to expand...
Click to collapse
I don't know much about kernels for the A30. In my A20 with an Android 12 GSI i use stock kernel with some small modifications (dmverity disabled, MTP fixed for AOSP, etc.)
TBM 13 said:
I don't know much about kernels for the A30. In my A20 with an Android 12 GSI i use stock kernel with some small modifications (dmverity disabled, MTP fixed for AOSP, etc.)
Click to expand...
Click to collapse
bro, you can enable 60fps FHD record for our devices?
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
flunkyball said:
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
Click to expand...
Click to collapse
Probably, I would have to check their libexynoscamera3.so library.
flunkyball said:
Wow, that seems like an promising approach ! Keep up the good work.
Any chance the patcher can be extended to Galaxy S10/20/21 ? or is that a completely different topic ?
Click to expand...
Click to collapse
I just checked the library of the Galaxy S10 and yes, it should be possible. However, doesn't it already support RAW?
TBM 13 said:
However, doesn't it already support RAW?
Click to expand...
Click to collapse
On the stock rom it probably does.
For the S10/20 on LOS only standard and wide lens are accessable whereas the telephoto is not.
On the S10 for LOS 17.1 I therefore had a patched "libexynoscamera3.so" as well granting access to telephoto lens via gcam.
However for LOS 18.1/19.0 or even for my new phone the S20 I was not able to find any patched libs anymore since nobody took the effort of reverse engineering it as you did.
Would you be willing to make the necessary adaption for your patcher to successfully enable raw on all lenses for LOS 18.1/19 on the S10/20 ?
flunkyball said:
On the stock rom it probably does.
For the S10/20 on LOS only standard and wide lens are accessable whereas the telephoto is not.
On the S10 for LOS 17.1 I therefore had a patched "libexynoscamera3.so" as well granting access to telephoto lens via gcam.
However for LOS 18.1/19.0 or even for my new phone the S20 I was not able to find any patched libs anymore since nobody took the effort of reverse engineering it as you did.
Would you be willing to make the necessary adaption for your patcher to successfully enable raw on all lenses for LOS 18.1/19 on the S10/20 ?
Click to expand...
Click to collapse
Sure. Do you have Telegram?
Bro, you can make this mod for Android 10 vendor?
SirKosichka said:
Bro, you can make this mod for Android 10 vendor?
Click to expand...
Click to collapse
Technically, yes. However, in the A20 enabling RAW in the Android 10 library makes the camera freeze after some seconds in apps like GCam.
If you are willing to test, i can do it, maybe the A30 doesn't have the same issue.
Bro will this mod work for Galaxy A30 (Android 11) ??
Edit: I'm sorry....for a moment I thought this mod for A20.....Sorry again.
Hridoyz said:
this mod work for Galaxy A30 (Android 11) ??
Click to expand...
Click to collapse
Yes, only on gsi or Oneui3.1 ROMs.You need ROM with 11 vendor
Version 2.1 of the module released, the biggest change is that there is no longer a need to change the Black Level in GCam settings, so GCams (or other camera apps) that don't have this option should now take photos without pink tint.
Full changes can be found here.
not work in A305f
Ali1412 said:
not work in A305f
Click to expand...
Click to collapse
That's not really helpful. What is happening to make you say it doesn't work, black screen? What ROM are you using? What kernel? What vendor, the one that comes with the ROM, stock Android 11 vendor or a custom one? What camera apps did you try?
TBM 13 said:
That's not really helpful. What is happening to make you say it doesn't work, black screen? What ROM are you using? What kernel? What vendor, the one that comes with the ROM, stock Android 11 vendor or a custom one? What camera apps did you try?
Click to expand...
Click to collapse
use stock rom and stock vendor and stock kernel android11 (ONE UI 3.1) and have black screen
Ali1412 said:
use stock rom and stock vendor and stock kernel android11 (ONE UI 3.1) and have black screen
Click to expand...
Click to collapse
on Snake OS 5 gcam support included

Question Is it possible to install ANX Camera in Redmi note 10 pro without root?

I am currently using Havoc OS 4.16 (non rooted) custom rom and the rom came with ANX Camera. It performs really amazing and i would like to install it in other roms. However when i searched around the internet on installation of the camera app some say it requires it needs root and magisk module while others say it doesn't need root and can be flashed from custom recovery without root. Can someone give a clear answer?
Device: Redmi Note 10 Pro
Code name: Sweet
Android Version: 11
Current rom: Havoc 4.16
Custom Recovery: Orange Fox
Encryption status: Yes
Anx version in Havoc: 204.StunningHeavenlyFugu
No. ANX is a magix module now. So magix is needed for ANX. All you can do is install a pre installed ANX rom like Project Elixir, pixelOS, etc.
There are some ROMs that have the MIUI camera preinstalled, like crDroid and PixelOS
andrewzodina said:
No. ANX is a magix module now. So magix is needed for ANX. All you can do is install a pre installed ANX rom like Project Elixir, pixelOS, etc.
Click to expand...
Click to collapse
Does project elixir have Anx camera?
any update to this thread?
im really appreciated
xdadice said:
any update to this thread?
im really appreciated
Click to expand...
Click to collapse
im sure exist apk version anx without magisk, but i don't remember where i founded.. groups telegram for sure...
i founded a recovery version named "Recovery-ANXCam-Installer.zip" too but not tested
aleMarvel said:
im sure exist apk version anx without magisk, but i don't remember where i founded.. groups telegram for sure...
i founded a recovery version named "Recovery-ANXCam-Installer.zip" too but not tested
Click to expand...
Click to collapse
can u give me the link or ill be searching but ty appreciated bro

Question Miui Camera in Pixel Experience ROM

Is there any way to get working Camera app from MIUI in PE on Redmi Note 10s? I'm very pleased by this ROM but this model have 4 camera modules on back, and on PE only one is used. I tryied installing Magisk module but it's not working for me. GCAM is very laggy and often crashes, but gave me working 3 camera modules.
So, is there any way to get orginal MIUI Camera app from stock rom?
raven17a said:
Is there any way to get working Camera app from MIUI in PE on Redmi Note 10s? I'm very pleased by this ROM but this model have 4 camera modules on back, and on PE only one is used. I tryied installing Magisk module but it's not working for me. GCAM is very laggy and often crashes, but gave me working 3 camera modules.
So, is there any way to get orginal MIUI Camera app from stock rom?
Click to expand...
Click to collapse
Probably not. My supposition is that the camera module is probably not compatible with Redmi Note 10S which is mentioned in the module aswell. You're out of luck
raven17a said:
Is there any way to get working Camera app from MIUI in PE on Redmi Note 10s? I'm very pleased by this ROM but this model have 4 camera modules on back, and on PE only one is used. I tryied installing Magisk module but it's not working for me. GCAM is very laggy and often crashes, but gave me working 3 camera modules.
So, is there any way to get orginal MIUI Camera app from stock rom?
Click to expand...
Click to collapse
reinstall stock and done

Categories

Resources