Hi,
I softbricked my phone. Let me say what i do.
My phone is ZTO and he was in this version (with security patch Fev)
SM-G998B/ZTO
G998BXXU1AUB9/G998BOWO1AUB9/G998BXXU1AUB8
So, try to update with a Multi CSC
SM-G998B/DBT
G998BXXS2AUBB/G998BOXM2AUBB/G998BXXU2AUBB
With patch of march its work (some fails in Odin but works)
Now, i try to put the same DBT witch april patch, but do not work.... Just stay in screen show that my BL is diferente of VBMETA
VBMETA G998BXXS2AUBB (March)
BOOTLOADER G998BXXU2AUC8 (April)
I Try to do downgrade of BL, but show binary error.
Try to not check BL and update just AP, CP and CSC, but odin show error..
Some help?
You need to flash all files.
BL, AP, CP, CSC (HOME_CSC will remain your userdata, if you flash CSC_OXM it will reset the device)
And all files have to be from the same version. Download Frija and download the firmware from there.
Unpack .zip and place all files in ODIN
Related
Hi guys the recent Australian firmwares N920IDVU3BPL2 of N920I has restriction which forces to stay on latest firmware. My LTE is not working on N920IDVU3BPL2 and it is not allowing me to install any old firmware to me.
If I still try to install any old firmware which was working and had good LTE on same phone then I get
"SYSTEM REV CHECK FAIL DEVICE 1 BINARY 0" error"
I think if I can flash my old firmware modem through twrp then I may fix LTE signal issue. Can anyone provide any assistance on how to create TWRP flashable modem and bootloader zip file because ODIN does not allow me to flash old firmware now.
Did you found it? I need the modem too. Question, is it necessary to flash bootloader too in order to flash modem?
Hi,
After trying to update to pie (the OTA update never arrived), it says there was error during the process. Reseted it to try factory recovery but got stucket on "Samsung Galaxy Note9 Screen".
It restarts with power + volume down but does not allow to enter recovery mode or anything else. Tried also with Smart switch, but the phone is not recognized.
Do you have any idea about how to Factory Reset it?
Thanks in advance for any tip you may provide
What is your phone model and country of origin?
Note 9 bought in Mexico with Android OREO and tried to flash via Odin the following version
Samsung Firmware info
Version Date: 2019-06-10
Android Version: 9
PDA
CSC
N9600ZHS2CSE1
N9600OWE2CSE1
(Argentina ANC)
Could enter into Downloading mode, but still odin returns error with hidden.img
Followed various tutorials to delete hidden from inside AP file after extracting it, but the file does not exist as in the tutorials.
Will keep you posted about any update.
Best
kinquela said:
Note 9 bought in Mexico with Android OREO and tried to flash via Odin the following version
Samsung Firmware info
Version Date: 2019-06-10
Android Version: 9
PDA
CSC
N9600ZHS2CSE1
N9600OWE2CSE1
(Argentina ANC)
Click to expand...
Click to collapse
Still you have not mentioned the varient. SM-N960N or SM-960F/DS or SM-N960U or SM-N960U1 or SM-N960W
after downloading appropriate firmware from Sammobile , open odin and put all 4 files in it, Tick bootloader option, auto reboot and nand erase all option in odin. then flash it.
Hey guys,
currently my S10+ is on Android 9, rooted and with TWRP:
Do you guys have any idea how I can update to the final Android 10 firmware without losing all my data, root and TWRP? (My CSC is DBT anyway btw)
Regards!
Download the newest firmware. Extract the firmware. Copy ap file to your download folder in the phone .Magisk patched the ap file. Now copy the magisk patched tar file back your pc. Open odin load BL, magisk patched ap, cp and home csc (retains all your data). Now flash it. Remember to hold power, bixby and volume up aka combo keys
Will it work? I think no
Player04 said:
Download the newest firmware. Extract the firmware. Copy ap file to your download folder in the phone .Magisk patched the ap file. Now copy the magisk patched tar file back your pc. Open odin load BL, magisk patched ap, cp and home csc (retains all your data). Now flash it. Remember to hold power, bixby and volume up aka combo keys
Click to expand...
Click to collapse
Thanks for the reply. I'll try it out!
henio1195 said:
Will it work? I think no
Click to expand...
Click to collapse
I'll try it out and report back. Why do you think it won't work?
Hmm I think that would so easy. Geiti created new root(magisk) for beta android 10 and for official 10 doesn't work.
I tried yesterday install android 10 for my S10 (SM-G973F, only magisk) but installation stopped on recovery. I had to stop the installation. Fortunately, the system still works.
I am rooted on my s10+, android 10.
Pls tell US what you did
Player04 said:
Download the newest firmware. Extract the firmware. Copy ap file to your download folder in the phone .Magisk patched the ap file. Now copy the magisk patched tar file back your pc. Open odin load BL, magisk patched ap, cp and home csc (retains all your data). Now flash it. Remember to hold power, bixby and volume up aka combo keys
Click to expand...
Click to collapse
Mine is Note 10+ (N976B) somehow its imei is pre-patched when i purchased, now it needs chimera everytime i do update(because it removes the network & imei info from the device).. what if i try your method will it wipe those certificates (which are patched by chimera) ? Please reply . Thanks
Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 1 With Higher Firmware!!!!
Unless Using Bit Safe Firmware That Is Patched
Downloads
SM-F916U/U1/W- Model
USERDATA_AIO_F916U_5G_FORCE_WIPE_10_10_21.tar.md5
This will force a wipe of data no mater what.
Full Odin 3.1.1 Bit1 Safe Firmware
F916USQS2EUH9_BIT1_SAFE.7z Thanks @markfm
This are odin files and will safely update all image files too bit 4 and keep bit 1 bootloaders. Unfortunately this will wipe data this is beyond my control as it seems to be a side affect of mixing firmware it causes data not to mount and therefore my AIO will format it. This is full firmware with USERDATA_AIO. This will put you on U firmware. Before flashing I recommend removing your google account and make sure in download mode you are not frp locked
If above USERDATA_AIO_G78*_FORCE_WIPE_NO_BL is newer than the one in this zip use the newer one from above
Odin3_v3.14.1_3B_PatcheD.zip
TWRP Recovery Provide by afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_F916U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_F916U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_F916U_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_F916U_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_22_S20_Series.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
elliwigy
klabit87
Krog18
me2151
stang5litre
Raymonf for modified odin
rayan-refoua for boot animation
TheMadScientist
afaneh92
kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
JDBarlow for test S20 stuff
Xylvion for testing s21
dark11b for testing s21
Hi, can i have the procedure for rooted Fold2 F916B for firmware update.
I'm super excited about this. Hope to see the info for bootloader unlock soon so I can try it. Thanks you're awesome!
Does this mean it can be updated on the latest firmware with root?
PLZ PLZ PLZ do this for the z Fold 3 u1 snapdragon please sir your work has been a God send since the s8+ for me. Thank you
The full odin bitsafe firmware link isn't working
Hey can you fix the link to the odin firmware please?
Nothing? Please fix the link to the odin firmware it doesn't work.
same here. Please reupload to the drive.
halx said:
same here. Please reupload to the drive.
Click to expand...
Click to collapse
What's going on here ? Why hasn't the OP responded to us?
Ok it's official....samsung murked the OP.
Hello Everyone
G998U AT&T Reboot & Restart Problem Resolved Two methods Below.
Note. Do this procedure at your own risk.
Phone turn on Automatically Reboot & Restart Problem.
1st (method). basically this issue firmware Not Updated.
Go to setting and Software Update
You have done Software Update.
Resolved this issue.
If your phone is not updating automatically. And You searched a lot on the internet and not found G998U At&t Firmware. (Binary 2,3,4,5).
Or by mistake you flash an other carrier flashed. Or you have checked all the carrier and flash them. Even then the problem of repeated reboot & Restart is not resolved.
Carrier Example (SPR | TBM | USC | VZW)
2nd (methods). You need download
Download Odin
Link https://odindownload.club/odin-3-14-1-patched-modded-for-windows.
#1) If you have a Binary U4 or S4
Download this firmware Full file CSC Code USC (USC_G998USQU4AUF5)
Link https://samfw.com/firmware/SM-G998U/USC/G998USQU4AUF5
All File flash Them.
Example. (AP Load BL Load CP Load CSC Load In Odin) Don't Need Home CSC file.
Flashing Done Resolved Dump Restart & Reboot Problem.
#2) If you have a Binary U5 Or S5
Download this firmware Full file CSC Code USC (USC_G998USQU5CVG9)
Link https://samfw.com/firmware/SM-G998U/USC/G998USQU5CVG9
All File flash Them.
Example. (AP Load BL Load CP Load CSC Load In Odin) Don't Need Home CSC file.
After flash done reboot phone (again Dump Restart & Reboot Problem) . turn off phone go to download mode flash Again below file
this file (USC_G998USQU5BULJ) only Download CP File and CSC File
Link https://samfw.com/firmware/SM-G998U/USC/G998USQU5BULJ
Example. (CP Load BL Load in Odin)
Flash Done Restart after 10 to 20 Seconds Factory Rest Option See. You should Factory Rest.
Resolved Dump Restart & Reboot Problem.
All Methods Done but not Restart & Reboot Problem Resolve. You need Chimera Tools. Binary Downgrade U4 And Than Try This 2nd (Method) Above #1
if Have any issue Ask with me.
Thanks