[ROM][UNOFFICIAL][capricorn][9] LineageOS 16.0 - Xiaomi Mi 5s ROMs, Kernels, Recoveries, & Other De

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Updating LineageOS from recovery​
Download LineageOS installation package.
Reboot to recovery.
Flash the package.
Reboot to system
Installing LineageOS from recovery, coming from other ROMs​
Download LineageOS installation package.
Optionally, download an application package add-on such as Google Apps (use the arm64 architecture).
If you are not in recovery, reboot into recovery:
With the device powered off, hold Volume Up + Power. Keep holding both buttons until the “MI” logo appears on the screen, then release.
Now tap Wipe.
Now tap Format Data and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage.
Return to the previous menu and tap Advanced Wipe, then select the Cache and System partitions and then Swipe to Wipe.
Sideload the LineageOS .zip package:
On the device, select “Advanced”, “ADB Sideload”, then swipe to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip.
check
TIP: If the process succeeds the output will stop at 47% and report adb: failed to read command: Success.
(Optionally): If you want to install any add-ons, repeat the sideload steps above for those packages in sequence.
info_outline
NOTE: If you want the Google Apps add-on on your device, you must follow this step before booting into LineageOS for the first time!
Once you have installed everything successfully, run ‘adb reboot’.
Official installation instructions from Lineage.
Downloads :
https://drive.google.com/drive/folders/1CwLCOM3_ouBL3K2nfi682V9hlcKAHmf6?usp=sharinghttps://mega.nz/folder/PlsEySYJ#1YtIgUgGrhO2vCUxx6xkmw
The purpose of this thread is to continue the support of Lineage 16 for Mi5S.
I am no developer, therefore I can't promise fixing bugs or changing the functionality.
The builds are done the official way and no software is added or removed afterwards.
My target is to do a build at least once a month.
XDAevDB Information
[ROM][UNOFFICIAL][capricorn][9] LineageOS 16.0, ROM for the Xiaomi Mi 5s
Contributors
Unicastbg
Source Code: https://github.com/LineageOS
First Created 2021-04-05
Last Updated 2022-04-20
Security patch level January, 2022
Latest build: lineage-16.0-20220420-capricorn-OTA
Changelog (for all LOS16 devices): https://www.lineageoslog.com/16.0

Tanks for this one, before i test it, what is best ROM you all use on mi5s, right now i am on PE-10, didn't update it for like 6 months. Now i want fresh installation, and i don't need latest anything, just OS that works, it is as fluid as it can be. So:
-this
-PE10
-PE11
-Official LoS16
-Unofficial LoS18
-or something else, what is best right now? Did anyone test more then one ROM.

Official LOS anything is gone for Mi5s. LOS16 was official, but due to the fingerprint issues it will never get 17.1 or 18.
I personally use LOS16 because everything works. And we still have regular security patches.
I have tried briefly the LOS18 and found it's not to my liking.
This is what I wrote in 18.1's forum (Link) based on my experience:
Well... Not sure if related somehow to Viper4Android, but the fingerprints are getting deleted after some time. And after restart. But when present, I think it unlocks faster than compared to LOS 16. However there are a few design features of Android 11 that made me switch back to 9.
Viper4android currently not working.
Apps that rely on fixed SU folder will fail.
Cannot disable Camera - Lens Cap app.
Cannot record calls. There might be a better app that does it ok, but I haven't searched much.
And finally - cannot limit the battery charge percentage - have it charged to 90% for example. I've tried with Floppy kernel as well.

The only thing that I really miss is the EIS that we had in MIUI. But the customization there is very limited compared to Lineage.
I haven't played much with other ROMs, maybe PE has it all sorted out and EIS and the fingerprint reader are both working just fine...

I've been waiting for a security patch for a while, but I think that was it for LOS 16. Had some blind hopes since we got updates after the official end. I'll be checking for updates for a while and if such appear, will update the build.
Update - to my surprise we got security and other updates!

Hmmm i tested this one, for now i found just one problem, if you unlock phone with pin, home button is "fingerprinet sensor" and not home button until you put finger.
And i got problem on install, i couldn't use OpenGApps aroma version (there was 2 problems, it asked for android 7 version, and then asked for arm not arm64 version, and any of this didn't work), othere openGApps versions worked. After install i have problem, banking app doesn't work (tested on othere phone, it works), so probably something from google is missing, if i don't find what i will must go on PE ROM. On install i used pico GApps (i really dont wan't googles bloatware), i will try with FULL version of GApps tonight, if it doesn't work i will must go on othere ROM-s.
But it is "ok" ROM, for now.

We got the July security updates today. I'll do another release tomorrow (done, forgot to update this post).
Using 3 banking apps, haven't had problems so far. About GAPPS, I've followed the official links and got the Nano version.

Hey guys, are you still using LOS 16 on your Mi 5s phones? Is there still need for up to date builds? I'm asking this because if it turns out no one's using this LOS version, then there's no need for newer builds. Like or reply if you want to continue receiving updates. I can also make custom builds with custom software installed, as per your liking. AdAway built in for example.

unicastbg said:
Hey guys, are you still using LOS 16 on your Mi 5s phones? Is there still need for up to date builds? I'm asking this because if it turns out no one's using this LOS version, then there's no need for newer builds. Like or reply if you want to continue receiving updates. I can also make custom builds with custom software installed, as per your liking. AdAway built in for example.
Click to expand...
Click to collapse
Yes, I am using. I installed lineageos 18.1 but it's graphical performance wasn't as good as 16.0, animation looked like stuttering it was awkward. So I installed your ROM. I preper vanilla lineageos 16.0 over prebuilt packages included.

unicastbg said:
Hey guys, are you still using LOS 16 on your Mi 5s phones? Is there still need for up to date builds? I'm asking this because if it turns out no one's using this LOS version, then there's no need for newer builds. Like or reply if you want to continue receiving updates. I can also make custom builds with custom software installed, as per your liking. AdAway built in for example.
Click to expand...
Click to collapse
Yes, I am using it, super stable and smooth. And everything works! Thanks for your work, it would be great to have monthly builds!

ukiz said:
Yes, I am using it, super stable and smooth. And everything works! Thanks for your work, it would be great to have monthly builds!
Click to expand...
Click to collapse
Tell me about SOT?
The LOS18 is a mess for this phone and the LOS17, is bad too? Is only for use a lastest version of Android.
Thanks

mind_pt said:
Tell me about SOT?
The LOS18 is a mess for this phone and the LOS17, is bad too? Is only for use a lastest version of Android.
Thanks
Click to expand...
Click to collapse
I cannot say much about the SOT as my phone has a really bad battery, but the rom works just as well as the official one did.

ukiz said:
I cannot say much about the SOT as my phone has a really bad battery, but the rom works just as well as the official one did.
Click to expand...
Click to collapse
Thanks for your reply. But you don't convence me, to use the same android version I prefer use the MIUI.eu version.
Any other ROM

unicastbg said:
Hey guys, are you still using LOS 16 on your Mi 5s phones? Is there still need for up to date builds? I'm asking this because if it turns out no one's using this LOS version, then there's no need for newer builds. Like or reply if you want to continue receiving updates. I can also make custom builds with custom software installed, as per your liking. AdAway built in for example.
Click to expand...
Click to collapse
Thanks for the updates. My Mi5s is going strong, battery life as good as ever. I run battery charge limit and charge to 80%, recharge from 40%. Get plenty enough use during the day and it's very quick to charge when needed.
Coming up to 5 years, of use, it's the longest I've used the same phone. With everything working well including my banking apps it does what I need!
While it would be good to have a later android version, 16 works well on this device - appreciate your time to keep it updated.

EpicSauce said:
Thanks for the updates. My Mi5s is going strong, battery life as good as ever. I run battery charge limit and charge to 80%, recharge from 40%. Get plenty enough use during the day and it's very quick to charge when needed.
Coming up to 5 years, of use, it's the longest I've used the same phone. With everything working well including my banking apps it does what I need!
While it would be good to have a later android version, 16 works well on this device - appreciate your time to keep it updated.
Click to expand...
Click to collapse
I appreciate your feedback! My Mi 5s is also the only phone I've ever used for that long. And yes, Android 9 is getting old, but it will run for an year or two more. And by that time our phones will probably have some hardware defects forcing us to move to something newer.

I am also still using the mi5s, I am on the last official 16.0. I appreciate your effort and will install an update now.

frank7d said:
I am also still using the mi5s, I am on the last official 16.0. I appreciate your effort and will install an update now.
Click to expand...
Click to collapse
I've compiled the next build with the latest security patches. Uploading later today.

I tried to install your latest build.
I got a boot loop. After a couple of seconds the mi symbol again and again.. Then also installed the latest los 16 from january, to no avail.
Fortunately I managed to restore from backup, on the second try.

frank7d said:
I tried to install your latest build.
I got a boot loop. After a couple of seconds the mi symbol again and again.. Then also installed the latest los 16 from january, to no avail.
Fortunately I managed to restore from backup, on the second try.
Click to expand...
Click to collapse
What was the previous rom you used? Have you had such issues with previous builds, if coming from LOS16?

I am on official los16. (Updated from los15 in 2019) Regularly updated via its updater until January 2021. Magisk 23.0

Related

[ROM][OTA][UNOFFICIAL][lavender][9] LineageOS 17.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android , which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by
installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are
not to blame us or XDA and its respected developers.
Installation
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Take Backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build
Reboot
DIRTY FLASH :
Download the latest build
Reboot to recovery
Wipe Cache
Reboot
Update through updater
Open the LineageOS updater
Search for updates
Download and click install
Now your device will reboot and flash automatically
Enjoy
Download
Download ROM:LineageOS 17
What's working :
Boots
RIL (Calls , SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
IR Camera
Camera
Cam recorder
Video Playback
Audio
Sensors
Flash
LED
GPS
VoLTE
Known bugs :
Offline charging
Some GCams not working
You tell me
News :
Join my telegram channel to see latest news!: lavenderci​
Kernel source: At GitLab
XDA:DevDB Information
LineageOS 17.1, ROM for the Xiaomi Redmi Note 7
Contributors
daniml3
Source Code: https://github.com/lineageos
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: 10.3.6 or higher
Version Information
Status: Stable
Current Stable Version: 02/01/2020
Stable Release Date: 2020-02-01
Created 2020-01-02
Last Updated 2020-01-13
Reserved
There are some screenshots:
https://github.com/daniml3/rom_screenshots
Reserved
Great news! can you make "wifi-call" working? thanks.
agritux said:
Great news! can you make "wifi-call" working? thanks.
Click to expand...
Click to collapse
I didn't know that existed xD, btw will look to see what I can do. And, do you know any ROM for lavender that supports it? If so let me know.
daniml3 said:
I didn't know that existed xD, btw will look to see what I can do. And, do you know any ROM for lavender that supports it? If so let me know.
Click to expand...
Click to collapse
It is working on some pie ROMs. For example on havoc 2.9 it is working fine. And also it is working all miui ROMs. Maybe for Android 10 ROMs you need Android 10 firmware. But I think it will be released tomorrow by Xiaomi eu team. Thanks.
thanks a lot..been waiting for this for so long.
rom is very smooth,bitgapps works fine, magisk works, viper works
though its a first build, still a few notes-
- battery percentage and styles doesnt work
- network indicator in the middle cut by notch
- expanded desktop option is not accessible.
thanks
First of all thank you for your work.
I'm facing an error message on every reboot.
Also trebuchet stopped working message after changing the language and using full screen gestures.
Camera does not work (did not even try GCam as the rest of the ROM is so immature you have to roll back anyways)
GApps installation a nightmare
Whatsapp does not link with Google Account
Thx for picking up the work!!! Really apreciate it and hope it goes stable and eventually official.
Your source code link only does somehow not link your work on the rom. Can you add the device specific sources ( I guess it is https://github.com/daniml3/android_vendor_xiaomi_lavender, https://github.com/daniml3/android_vendor_xiaomi_lavender) ?
Looking at the fork history am I thus right to assume that this ROM builds on and tracks the recent developments on PE ROM?
eraycetin said:
First of all thank you for your work.
I'm facing an error message on every reboot.
Also trebuchet stopped working message after changing the language and using full screen gestures.
Click to expand...
Click to collapse
That's not happening to anyone, make sure it was a clean installation, and you met the firmware requeriments.
till. said:
Thx for picking up the work!!! Really apreciate it and hope it goes stable and eventually official.
Your source code link only does somehow not link your work on the rom. Can you add the device specific sources ( I guess it is https://github.com/daniml3/android_vendor_xiaomi_lavender, https://github.com/daniml3/android_vendor_xiaomi_lavender) ?
Looking at the fork history am I thus right to assume that this ROM builds on and tracks the recent developments on PE ROM?
Click to expand...
Click to collapse
The base of the trees are taken from PE yes
OTA update from 1/2 version to 1/3 version caused boot loop. The phone kept going to recovery. Clearing caches did not help.
I do have magisk installed. Maybe that's the issue? Clean install of 1/3 version worked fine.
till. said:
Thx for picking up the work!!! Really apreciate it and hope it goes stable and eventually official.
Your source code link only does somehow not link your work on the rom. Can you add the device specific sources ( I guess it is https://github.com/daniml3/android_vendor_xiaomi_lavender, https://github.com/daniml3/android_vendor_xiaomi_lavender) ?
Looking at the fork history am I thus right to assume that this ROM builds on and tracks the recent developments on PE ROM?
Click to expand...
Click to collapse
Official is not happening I guess.
No one wanted to maintain an official los before.
smvsmv said:
OTA update from 1/2 version to 1/3 version caused boot loop. The phone kept going to recovery. Clearing caches did not help.
I do have magisk installed. Maybe that's the issue? Clean install of 1/3 version worked fine.
Click to expand...
Click to collapse
That's because of the GApps.
You need to reinstall them after updating.
thanks
daniml3 said:
That's because of the GApps.
You need to reinstall them after updating.
Click to expand...
Click to collapse
Thanks! will try with the next update. That also means that I cannot try to install from the OTA update feature because the phone boots up right after flashing the ROM update.
smvsmv said:
Thanks! will try with the next update. That also means that I cannot try to install from the OTA update feature because the phone boots up right after flashing the ROM update.
Click to expand...
Click to collapse
LineageOS is working on a fix so addon.d will work and there wont be the needed to reinstall GApps. A workaround for using OTA is disabling auto-reboot after OTA in recovery, or just when the phone auto reboots, press volume up button to boot again into recovery.
Does this ROM need Gapps to work or can it work with microg? I tried installing LOS 16 without Gapps and I was never able to get it to boot without Gapps.
kari04 said:
Does this ROM need Gapps to work or can it work with microg? I tried installing LOS 16 without Gapps and I was never able to get it to boot without Gapps.
Click to expand...
Click to collapse
I'm using the ROM without gapps and all is ok
darhma said:
I'm using the ROM without gapps and all is ok
Click to expand...
Click to collapse
I'm going to give it a try, thank you

[ROM][OFFICIAL][enchilada][11] LineageOS 18.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions :
https://wiki.lineageos.org/devices/enchilada
Downloads :
https://download.lineageos.org/enchilada
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
It's cool
wondering anyone tried this?
[email protected] said:
wondering anyone tried this?
Click to expand...
Click to collapse
Just booted with NikGapps and canary Magisk - GPS seems to work neither here nor on POSP, which I migrated from. Otherwise seems okay!
Edit: the fingerprint auth doesn't work too and the camera crashes upon detecting a face - prolly should've done a factory reset when migrating lmao. Will report in a while how that went
Edit 2: after a factory reset I managed to get GPS working, however fingerprint auth and face detection still fail
dikivan2000 said:
Just booted with NikGapps and canary Magisk - GPS seems to work neither here nor on POSP, which I migrated from. Otherwise seems okay!
Edit: the fingerprint auth doesn't work too and the camera crashes upon detecting a face - prolly should've done a factory reset when migrating lmao. Will report in a while how that went
Edit 2: after a factory reset I managed to get GPS working, however fingerprint auth and face detection still fail
Click to expand...
Click to collapse
Just curious, did you flash with TWRP or use the Lineage recovery? If TWRP works it will make installing Magisk much simpler.
dikivan2000 said:
Just booted with NikGapps and canary Magisk - GPS seems to work neither here nor on POSP, which I migrated from. Otherwise seems okay!
Edit: the fingerprint auth doesn't work too and the camera crashes upon detecting a face - prolly should've done a factory reset when migrating lmao. Will report in a while how that went
Edit 2: after a factory reset I managed to get GPS working, however fingerprint auth and face detection still fail
Click to expand...
Click to collapse
Also, How's the experience with POSP. I'm currently on Pixen Android 11 which is good with issues majorly in Camera during Face Detection.. Battery Life ais great and ROM is very snappy. Liking it.
Clean flash, latest OOS, TWRP, LOS 18 in both slots, and Nikgapps and Magisk Modded. It boots, but NFC it´s no working. All the rest in my initial setup works ok. I didn´t try camera at moment.
With Magisk Canary it doesn´t boot, goes to fastboot mode.
At first it doesn´t pass Safetynet test. With Magisk Props module it´s ok. (Correction: Magisk props works with Manager Canary app over Magisk Modded, but root it´s lost)
Thanks dev for your work!
Dirty flashed, latest OOS, current TWRP, flashed Lineage 18 both slots. No magisk or other mods. Mobile data not working and when I try to open the network from settings it crashes back to the home screen. Wiping cache doesn't help.
Oh well, guess it's time to wipe and start with a fresh install I was hoping ...
Nut_House said:
Just curious, did you flash with TWRP or use the Lineage recovery? If TWRP works it will make installing Magisk much simpler.
Click to expand...
Click to collapse
Afaik LOS recovery does not allow flashing; I used TWRP
dikivan2000 said:
Afaik LOS recovery does not allow flashing; I used TWRP
Click to expand...
Click to collapse
Thanks. Makes sense, I never used LOS recovery, always just booted to TWRP when I needed to update or flash something.
Got impatient, went ahead and made the leap earlier and tried a dirty flash. It didn't go well. Just finished doing a wipe and clean install and so far so good. Will start reinstalling apps and see how things play out.
@LuK1337 Thanks for bringing LineageOS 18 for OP6.
I have found a few bugs,please have a look at them
1) Front camera FC when face is brought closer to the camera.
2) unable to make call when Volte is enabled.
3) NFC does not work(quick toggle is greyed out).
Update: 2nd build fixed camera and volte
Hi @LuK1337,
thanks a lot for taking care of our devices,
to install, which base must be on ? Latest OOS, or beta preview for P ?
And about gapps, do we have to use gapps for 11 or can we use opengapps 10 ? (did not see beta 11 for opengapps)
Cygnust said:
Hi @LuK1337,
thanks a lot for taking care of our devices,
to install, which base must be on ? Latest OOS, or beta preview for P ?
And about gapps, do we have to use gapps for 11 or can we use opengapps 10 ? (did not see beta 11 for opengapps)
Click to expand...
Click to collapse
>to install, which base must be on ? Latest OOS, or beta preview for P ?
No idea what firmware I'm even on but i'm definitely not on Android 9 one...
>And about gapps, do we have to use gapps for 11 or can we use opengapps 10 ? (did not see beta 11 for opengapps)
It depends whether you actually want your phone to work or not.
Thanks to Luk for delivering high quality ROMs - the second build indeed fixes the camera. However, does not boot with Magisk (21000) anymore
qualo said:
Clean flash, latest OOS, TWRP, LOS 18 in both slots, and Nikgapps and Magisk Modded. It boots, but NFC it´s no working. All the rest in my initial setup works ok. I didn´t try camera at moment.
With Magisk Canary it doesn´t boot, goes to fastboot mode.
At first it doesn´t pass Safetynet test. With Magisk Props module it´s ok. (Correction: Magisk props works with Manager Canary app over Magisk Modded, but root it´s lost)
Thanks dev for your work!
Click to expand...
Click to collapse
Hi,
which magisk version are you using ? mine goes on fastboot too
Cygnust said:
Hi,
which magisk version are you using ? mine goes on fastboot too
Click to expand...
Click to collapse
The one shared in post #42 in POSP 11 beta ROM.
(Sorry, I didn't find how to share the direct link to post)
With this Magisk_debug2.zip it boots and you can pass safetynet with MagiskProps without updating manager
I'm running the 10/09 build of LOS with magisk v21.0 (21000) and it boots with no issues. In fact, after a few days of usage I'm impressed with just how well everything works for such an early release. Twice it appeared to unlock with my pattern and then dumped me back to the login screen and the connection to my Garmin watch has dropped a couple of times, which never happened with LOS 17.1. Otherwise, it's been smooth sailing.
LuK1337, well done :good:
installed fine with magisk canary and manually patched boot.img from payload to flash in twrp.
just high cpu usage with zygote 64 and system_server other than that nice job LuK1337
Stoowyguy said:
installed fine with magisk canary and manually patched boot.img from payload to flash in twrp.
just high cpu usage with zygote 64 and system_server other than that nice job LuK1337
Click to expand...
Click to collapse
I noticed the CPU usage bug too. Hopefully Luk1337 can sort it out.
Sent from my ONEPLUS A6003 using Tapatalk
Just want to say thank you for LuK1377, the ROM is REALLY GREAT ! The smoothness and new features of Android 11 makes me wanna stick to it, even though it's still in early development.
I'm running the latest build from today and just want to give my feedback about one point: even though the screen is set to time out in 30 seconds (in my case), it turns off and a second later, it turns on again without anyone touching the phone.
If I block my phone using the power button, it works correctly. If I wait the 30 seconds, it stays awake (phone not charging, stay awake option on dev options is off).
The battery life was also not great (when I was using the build from october 11th, still testing this one) but it's expected and I'm not concerned about it.
Thank you again LuK1337!

[ROM] [S9/S9+] [UNOFFICIAL] [LineageOS 18.1] [Exynos] [Weekly]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM DOWNLOADS:
[ROM] [S9/S9+/Note 9] [UNOFFICIAL] [LineageOS 18.1] [Weekly]
Last Updated July 30, 2022
OS Version: Android 11 (LOS 18.1 changelog)
Kernel: Linux 4.9.325 (July 30, 2022)
Security Patch: AOSP (July 5, 2022)
Wireguard: 20220627 (June 27, 2022)
ROM INSTALL INSTRUCTIONS:
From OEM:
Lineage Recovery
Format /system + /data + /cache
Flash
Reboot
Root is not included. To root, install Magisk yourself.
From existing Unofficial weekly:
Use OTA, or
Sideload via ADB in recovery
BASEBAND UPDATING:
Install Samsung USB drivers
Install Odin 3.14 (or later)
Download updated baseband firmware from the XDA thread for your model phone.
Unzip and re-pack "modem.bin" into a .tar file such as "modem.tar"
Reboot phone into download mode
Open Odin
Load your modem.tar file into CP in Odin
Start flash
Reboot
MICROG INSTALL INSTRUCTIONS:
In the F-Droid store add in the appropriate repo: https://microg.org/fdroid/repo per the official instructions.
Do the following, in this order:
Install microG services core (F-Droid or Github)
Install microG services framework proxy (F-Droid or Github)
Install NLP backends Mozilla location (F-Droid) and GSM Location (F-Droid)​
Install Google Play Store (APK mirror) or FakeStore (F-Droid or Github)​
microG settings -> self check -> enable all features​
microG settings -> location modules -> enable Mozilla Location Service​
For background location permission go to your system settings and allow microG services core and your Mozilla NLP to access location all the time.
For full notification support got to microG settings -> enable Google device registration, cloud messaging, and Google safety net.
WORKING FEATURES:
GPS
NFC
Wi-Fi
Audio
HDMI
Camera
Ethernet
Bluetooth
MTP/ADB
Encryption
Glove Mode
Android Auto
OTA Updates
Call Recording
Mobile Network
SELinux Enforcing
Fingerprint Sensor
Signature Spoofing
Wireguard (via kernel)
NOT WORKING FEATURES:
Iris Scanner
VoLTE
CONTRIBUTORS:
Neurotical
Builds and uploads the weekly releases (incl. OTA).
Commits changes to repos.
Patches & updates kernel.
Adds functionality per community requests.
Fixes LOS compile bugs, maintains repos.
Gnarf49
How-to compile LOS guidance & instructions in the original thread.
Murtzsch
Guidance updating kernel in the original thread.
Guidance including the Wireguard feature.
King1990
Fixing LOS compile bugs to keep this build alive!
dwarisz
Fixing LOS compile bugs to keep this build alive!
gusnz
Guidance on enhancing universal9810-common repo!
Synt4x.93
The original developer making these builds possible. Thank you so much!!!
SOURCE CODE:
https://github.com/Geoknyda/
https://www.lineageoslog.com/18.1
https://github.com/LineageOS/android_build
https://github.com/Geoknyda/android_kernel_samsung_universal9810
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/?h=linux-4.9.y
REFERENCES:
https://en.wikipedia.org/wiki/Linux_kernel_version_history#Releases_4.x.y
REQUIREMENTS:
Stock Samsung Oneui 2 - 2.5 (Android 10) Firmware. (Bootloader + Vendor)
XDA DevDB Information
LineageOS 18.1, ROM for the Samsung Galaxy S9
Version Information
Status: Stable
ROM Firmware Required: Oneui 2 - 2.5
My work will always be free for everyone to use and I will never hide anything behind a paywall.
* We are not responsible for anything that may happen to your phone by installing custom ROMs/kernels.
* You do it at your own risk. You take responsibility upon yourself and are not to blame us or XDA.
* Your warranty will likely be voided by installing custom ROMs.
Great, thanks a lot!
Is a clean install needed coming from official builds (synt4x.93)?
geronimoge said:
Great, thanks a lot!
Is a clean install needed coming from official builds (synt4x.93)?
Click to expand...
Click to collapse
If you installed and are currently running one of Synt4x's ROM builds, you can flash over it. If you're coming from stock ROM you'll have to do a full format per Lineage's official guide.
Wow looks like a polished and hassle-free Lineage version! Thanks for your work and for sharing it.
I am considering to buy either a Galaxy S9 or S10 for an acquaintance since both are often sold phones. So they should have good community support for quite a while. Neither of the two has official Lineage support as of now. They do appear to be supported by /e/OS and CrDroid but I feel that Lineage is still the way to go for rock-solid experience right after flashing.
So is it planned to add official Lineage support? If not, would it be feasible with some help and contributions of others? Could you add this information in the first post for others too please?
Would be valuable information for many
Thanks for updating the rom. Are you going to keep the rom up to date all the time or just this once?
Tiago Saraiva said:
Thanks for updating the rom. Are you going to keep the rom up to date all the time or just this once?
Click to expand...
Click to collapse
I'll run the updates weekly.
Great! We missed LOS 18.1 for S9+!
Just did a dirty flash and rebooted successfully. So far everything is fine.
So thanks again!
BTW: I had to flash magisk again.
Haven't flashed ROMs since I had my Nexus 6P, so apologies if I missed something - is there a specific method to enable encryption on this ROM, or is it simply broken as of now?
I set my phone up, logged into everything and reinstalled all my apps, and then enabled encryption. Now the phone crashes and performs soft reboots. It also logged me out of my Google account. I suppose I'm going to have to wipe and reinstall.
It's also worth noting that neither TWRP 3.3.1 nor 3.5.2 can decrypt /data (I double-checked - the PIN was correct), which is a shame. I would have liked to have /data encrypted.
aureljared said:
Haven't flashed ROMs since I had my Nexus 6P, so apologies if I missed something - is there a specific method to enable encryption on this ROM, or is it simply broken as of now?
I set my phone up, logged into everything and reinstalled all my apps, and then enabled encryption. Now the phone crashes and performs soft reboots. It also logged me out of my Google account. I suppose I'm going to have to wipe and reinstall.
It's also worth noting that neither TWRP 3.3.1 nor 3.5.2 can decrypt /data (I double-checked - the PIN was correct), which is a shame. I would have liked to have /data encrypted.
Click to expand...
Click to collapse
I figured it out! The trick was to enable encryption before setting anything else up.
Skip everything you can in initial setup (no Wi-Fi, no Google account, etc) so that by the end all you have is a PIN code in place (skip adding a fingerprint too). Then enable encryption, allow it to do its job, and when it reboots you can go about continuing setup.
TWRP unfortunately still cannot decrypt /data, however.
Hope this helps anyone running into the same problem.
Hi dude, I have a samsung s9, I don't know yet between install DotOS (wich there's not european version I think), CrDroid (which is offically maintained) or LineageOS, I saw that as you said Synt4x.93 did one, but what's the difference between his rom and yours ? Thanks in advance and thanks for your work ^^
samsepi0l99 said:
Hi dude, I have a samsung s9, I don't know yet between install DotOS (wich there's not european version I think), CrDroid (which is offically maintained) or LineageOS, I saw that as you said Synt4x.93 did one, but what's the difference between his rom and yours ? Thanks in advance and thanks for your work ^^
Click to expand...
Click to collapse
LineageOS 18.1 is regularly updated by the maintainers, so I just run the updates for S9 and S9+ owners. This includes monthly AOSP performance and security updates.
Additionally, I am in the process of upstreaming the kernel. This provides performance and security enhancements made possible by the long term Linux kernel maintainers.
Synt4x hosts the device specific repos that make building Linegae 18.1 for the S9 and S9+ possible.
Neurotical said:
LineageOS 18.1 is regularly updated by the maintainers, so I just run the updates for S9 and S9+ owners. This includes monthly AOSP performance and security updates.
Additionally, I am in the process of upstreaming the kernel. This provides performance and security enhancements made possible by the long term Linux kernel maintainers.
Synt4x hosts the device specific repos that make building Linegae 18.1 for the S9 and S9+ possible.
Click to expand...
Click to collapse
Ok thx, so if I want to install a rom, it's yours then. Because updates
Have the Kernel upgrades improved anything noticeable on star2lte, eg battery life or something?
Great job too. well done !
Galaxy9plus-support said:
Have the Kernel upgrades improved anything noticeable on star2lte, eg battery life or something?
Great job too. well done !
Click to expand...
Click to collapse
Yeah, there's a lot of improvements in performance, battery life, and security. I notice better reponsiveness and battery life, definitely. There's a full list of updates here: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/log/?h=linux-4.9.y Just browse for the kernel you're on and look at the previous update details. You can also browse my working kernel repo here: https://github.com/Geoknyda/android_kernel_samsung_universal9810 and reconcile with the Linux link to make sure the updates you care about are committed. I save a branch off of my default 4.9y after every patch bundle in case I have to revert due to an incompatibility.
At the rate I am going, I expect to have the kernel fully patched and up to date in a couple of days. I'll keep posting the ROMs as I progress in the OP. It's a lot of work going through 3,400 commits in a few days, but I think those who want security and performance for their S9/S9+ deserve to have it until the kernel reaches EOL in 2023.
Update:
The kernel is now fully patched and up to date. I will be maintaining additional kernel updates as they are released by the Linux Long-Term Support kernel team for the 4.9y branch until 2023, which is EOL for that branch. These updates will be merged into the weekly builds as well. Enjoy!
Hi there
jst a quick question......do the monthly android security updates come OTA, or do I have to download a file and install with TWRP?
I only ask because someone here seemed to sugegst that you had to do a complete reinstall of the latest version?
waynea said:
Hi there
jst a quick question......do the monthly android security updates come OTA, or do I have to download a file and install with TWRP?
I only ask because someone here seemed to sugegst that you had to do a complete reinstall of the latest version?
Click to expand...
Click to collapse
You can flash it over your existing ROM via ADB or OTA..
thaks for super quick reply.
No the original install will be over stock. But what to i need to do when there is an update?
Updating from stock, you'll have to do full wipe/flash/reset.
Updating afterwards with weekly builds in this thread's OP only requires dirty flashing:
Use OTA
or:
upload recovery
sideload updated zip
format cache & reboot

[ROM][UNOFFICIAL][capricorn][11] LineageOS 18.1 Updated

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
======================================
The only purpose of this thread is to provide and share updated packages of Lineage 18.1 for Mi 5S, which are built and signed following the official instructions, so:
No software is added or removed afterwards.
There aren't any changes in functionality.
Some bugs may get fixed, and others may appear. You can review the changelog in the link above. No support will be provided.
Use at your own risk.
I also want to thank unicastbg for his support for making these builds possible
======================================
Installing LineageOS from recovery, coming from other ROMs​
Read also the Additional information section.
Official installation instructions from Lineage.
Updating LineageOS from recovery​
Read also the Additional information section.
Download LineageOS installation package.
Reboot to Recovery.
Flash the package.
Reboot to System.
Additional information:
You may also want to have some Google stuff, so you will have to download GApps as well.
In order for the FP to work, choose "pico" for Android 11. This is the ONLY variant that has worked for me.
You will have to flash this package right after the ROM and BEFORE rebooting to System.
For example, assuming that you already have a custom recovery installed (https://dl.twrp.me/capricorn/) and want to start from scratch, these would be the steps to follow, but they can vary depending on your current configuration:
Download ROM and GApps pico.
Reboot to Recovery.
Wipe Cache and System partitions.
Flash ROM and GApps in a row.
Wipe Dalvik and Cache.
Reboot to System.
Downloads:
https://mega.nz/folder/pkJkGQaR#wVuaBMJoMKv7NI-f0en0aw
https://drive.google.com/drive/folders/10plEhJZo_HNS7a-ktQRRMKIH3wIxPd82
Builds:
lineage-18.1-20221012-UNOFFICIAL-capricorn-signed.zip: 279b3ef0e4365e3f1128d5d69344fe14b3829102 (SHA1SUM)
lineage-18.1-20220910-UNOFFICIAL-capricorn-signed.zip: 5abb473c3d1c6dc336c6da60100dfcc01ca6f5c7 (SHA1SUM)
First created: 2022-09-15
Last updated 2022-10-12
Security patch level: October 2022
Latest build: lineage-18.1-20221012-UNOFFICIAL-capricorn-signed.zip
damn man, the Xiaomi Mi 5s has been resurrected, I really wanted to see this smartphone with Android 12 or 13...
archipepe said:
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
======================================
The only purpose of this thread is to provide and share updated packages of Lineage 18.1 for Mi 5S, which are built and signed following the official instructions, so:
No software is added or removed afterwards.
There aren't any changes in functionality.
Some bugs may get fixed, and others may appear. You can review the changelog in the link above. No support will be provided.
Use at your own risk.
I also want to thank unicastbg for his support for making these builds possible
======================================
Installing LineageOS from recovery, coming from other ROMs​
Read also the Additional information section.
Official installation instructions from Lineage.
Updating LineageOS from recovery​
Read also the Additional information section.
Download LineageOS installation package.
Reboot to Recovery.
Flash the package.
Reboot to System.
Additional information:
You may also want to have some Google stuff, so you will have to download GApps as well.
In order for the FP to work, choose "pico" for Android 11. This is the ONLY variant that has worked for me.
You will have to flash this package right after the ROM and BEFORE rebooting to System.
For example, assuming that you already have a custom recovery installed (https://dl.twrp.me/capricorn/) and want to start from scratch, these would be the steps to follow, but they can vary depending on your current configuration:
Download ROM and GApps pico.
Reboot to Recovery.
Wipe Cache and System partitions.
Flash ROM and GApps in a row.
Wipe Dalvik and Cache.
Reboot to System.
Downloads:
https://mega.nz/folder/pkJkGQaR#wVuaBMJoMKv7NI-f0en0aw
First created: 2022-09-15
Last updated 2022-09-15
Security patch level: August 2022
Latest build: lineage-18.1-20220910-UNOFFICIAL-capricorn-signed.zip
Click to expand...
Click to collapse
Good Job xD
Fingerprint is working pretty well! Use Pico GApps if FP doesn't work for you.
Thanks! Mi 5s still resists!
How is the battery performance in this ROM? And which Kernel would you recommend?
Speaking about battery, it really, really helped me find what's consuming it by opening a terminal and using either "top" or "htop" commands. This gives you the most CPU hungry processes in real time. A text based process manager, a sort of speech. Finding and "fixing" those applications resulted in a much better battery life. Turned out I had a file explorer app that was consuming 90% of the CPU. Uninstalling it made the phone way more responsive.
But this was a 3rd party app, not included in this build.
edunonesr said:
How is the battery performance in this ROM? And which Kernel would you recommend?
Click to expand...
Click to collapse
I haven't found any issues regarding battery performance, just like LOS 16.
As per kernel, I once tried builds with 4.4 and my device got hotter, that's why I'd stick to 3.18.
@archipepe
Thanks!
You have a great works.
Not flashed any Kernel can update ?
LuK1337's latest ROM lineage-18.1-20220130_145528-UNOFFICIAL-capricorn.zip,
latest MIUI stable firmware, Xiaomi's V11.0.2.0.OAGCNXM based on Android 8.0.
Downloads Link can not visit in China mainland, https://mega.nz/folder/pkJkGQaR#wVuaBMJoMKv7NI-f0en0aw.
Can you provide another Link ? Maybe in https://www.zippyshare.com/
couplefly said:
@archipepe
Thanks!
You have a great works.
Not flashed any Kernel can update ?
LuK1337's latest ROM lineage-18.1-20220130_145528-UNOFFICIAL-capricorn.zip,
latest MIUI stable firmware, Xiaomi's V11.0.2.0.OAGCNXM based on Android 8.0.
Downloads Link can not visit in China mainland, https://mega.nz/folder/pkJkGQaR#wVuaBMJoMKv7NI-f0en0aw.
Can you provide another Link ? Maybe in https://www.zippyshare.com/
Click to expand...
Click to collapse
Yes, you could update your phone following LuK's build.
I wouldn't mind to upload it elsewhere, but can't access Zippyshare either
couplefly said:
@archipepe
Thanks!
You have a great works.
Not flashed any Kernel can update ?
LuK1337's latest ROM lineage-18.1-20220130_145528-UNOFFICIAL-capricorn.zip,
latest MIUI stable firmware, Xiaomi's V11.0.2.0.OAGCNXM based on Android 8.0.
Downloads Link can not visit in China mainland, https://mega.nz/folder/pkJkGQaR#wVuaBMJoMKv7NI-f0en0aw.
Can you provide another Link ? Maybe in https://www.zippyshare.com/
Click to expand...
Click to collapse
A new link and a new build have been added.
archipepe said:
A new link and a new build have been added.
Click to expand...
Click to collapse
Thank You.
I want to try it.
I am on 16.0-20210210-NIGHTLY-capricorn currently. Would you suggest me to upgrade to this one?
warden spy said:
I am on 16.0-20210210-NIGHTLY-capricorn currently. Would you suggest me to upgrade to this one?
Click to expand...
Click to collapse
Absolutely
archipepe said:
Absolutely
Click to expand...
Click to collapse
Please, add a new build for december if you can.
OLZEE said:
Please, add a new build for december if you can.
Click to expand...
Click to collapse
I haven't forgotten, it's just I've been busy. I'm afraid I won't be able to produce a new one till last week of January... Anyway, last build works perfect in my device, are you having any trouble?
archipepe said:
I haven't forgotten, it's just I've been busy. I'm afraid I won't be able to produce a new one till last week of January... Anyway, last build works perfect in my device, are you having any trouble?
Click to expand...
Click to collapse
archipepe said:
I haven't forgotten, it's just I've been busy. I'm afraid I won't be able to produce a new one till last week of January... Anyway, last build works perfect in my device, are you having any trouble?
Click to expand...
Click to collapse
Thank you for answer and support 18.1 version of lineage. I wish you Marry Christmas and Happy New Year.
Likewise, merry Christmas
@archipepe - Thank you so much for reviving the Mi 5s! Have just installed your ROM and it's working great! Was seriously considering ditching this phone and buying a new one on account of the lack of LineageOS support, but I think I'll now stick with it for a while longer. Would be great to see LineageOS 19/20 on it at some point!!!
For what it's worth, I'm using Core NikGApps and the fingerprint sensor does not work. No big deal though, since I'm happy not to use it.

[ROM][A5|7 2017][13] LineageOS 20 Unofficial

LineageOS 20 Unofficial for Galaxy A5|7 2017
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 13 (t), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.​
What's working?
Audio
Calls
Wifi
Hotspot
Mobile data
GPS
Bluetooth
Fingerprint
Hardware composer
OpenMAX (hardware encoding/decoding)
Camera (photos + recording)
NFC
Sensors
Vibration
Double tap to wake
Always on display
What's broken?
FDE (full disk encryption) has been fully deprecated in android 13
Network traffic monitoring
Sepolicy is permissive
Supported variants
All variants of Galaxy A5 (2017) and Galaxy A7 (2017). Dual SIM is also supported.
How to install
Make sure you had Samsung's Oreo firmware bootloader and modem before installing this.
Make sure you are using the latest official TWRP version.
Download the lineage build and optionally google apps.
In TWRP format data (if you still have stock rom encryption).
In TWRP wipe data and cache.
Flash LineageOS.
Optional: Flash Google apps (rightafter).
Reboot.
It's okay to dirty flash new updates.
Downloads
MEGA | google drive | androidfilehost | google apps | changelog
Old builds:
Lineage 19.1 Unofficial: MEGA | androidfilehost | google drive | changelog | sources
Donations
If you find the work I do helpful, you can support me by donating via this link.
Telegram
There's a telegram group made by A5|7 users where we hang out. Feel free to check it out.
Credits
Huge thanks to (a lot of people):
RaymanFX for the original work on lineage 14.1 and thus making this possible.
Forkbomb for contribution to original 14.1 sources.
Simon1511 for contributing to these devices via patches uploaded to lineageos gerrit.
Stricted, Danwood76, Fcuzzocrea, Ivan Meler and others for contribution to exynos platform.
SGTPresticle, Jmackley, Simon1511, Arno and others for doing the testing.
LineageOS Team
Me, for the infinite hours spent on this project.
Kernel source: https://github.com/filiprrs/android_kernel_samsung_universal7880
ROM OS Version: Android 13
ROM Kernel: Linux 3.18.140
ROM Firmware Required: Samsung oreo firmware
Created 2022-11-12
FAQ
Help my sim doesn't work
Please read the installation instructions more carefully. Oreo firmware bootloader and modem is a must.
You can find the collection along with the guide in this xda thread.
I'm sometimes having crackling sound when listening to music
Turn off 'ok google now' functionality in google app settings. If you have troubles finding it you can as well go to settings>apps, find app called 'google' and disable microphone permission.
Does this rom support VoLTE?
No. And it likely won't in the near future. Samsung's exynos VoLTE implementation is proprietary and non-standard. It is not possible on AOSP based roms for the time being.
I have weird issues with camera (wrong resolution, issues with flash etc.)
Тhis could very well be an issue with the included camera app. Try a third party camera app.
Will you fix the bugs? Will this version ever go official?
I've already fixed everything I was able to. The main drawback is that our linux kernel 3.18 has become too old. Our devices starting showing their age. Because of this version will not go official.
My hardware keys light up whenever I touch the screen
Navigate to Settings->System->Buttons->Backlight and tick 'Illuminate buttons only when pressed'. You might want to reduce time on the scaler to 1 second, too.
How to switch to full screen gestures
1. Navigate to Settings->System->Buttons->Backlight and tick 'Enable on-screen nav bar'.
2. Navigate to Settings->System->Gestures->System navigation and tick 'Gesture navigation'.
I need help with google camera
Please see this xda post.
Help! I have problems with my bank app/my device is failing SafetyNet.
Try following this guide by Simon1511.
Nice to see this out, great work
Great job as always.
im glad there's still hope for a little bit of support for our rusty device
i know this is pretty ridiculous at this point but i really hope this become another galaxy s2 situation where despite how old the device is.. it still get more and more versions despite its age
Yea, but the S2 is more of a tinkerers device at this point, A5 is still usuable (at least on A11, broke my screen before I could test 12 :C)
Possible update with simple TWRP install (wo delete data) from 19.1 Unofficial? (I think yes.)
Very nice rom ....smoot and stable
Which one is better LineageOS 19 or LineageOS 20? Which one is more stable for daily use? Or is just LineageOS 18 stable enough for daily use for now?
How is the battery consumption?How is the camera?
schneitomee said:
Possible update with simple TWRP install (wo delete data) from 19.1 Unofficial? (I think yes.)
Click to expand...
Click to collapse
I also think yes, but no one has tested this already. Note that you would surely need to reflash the same gapps package you were using before right after the new version flash.
Bried said:
Which one is better LineageOS 19 or LineageOS 20? Which one is more stable for daily use? Or is just LineageOS 18 stable enough for daily use for now?
Click to expand...
Click to collapse
I can't tell this for certain. It totally depends on your usecase and preferences. There aren't any unresolved bugs coming from previous versions (other than mentioned). Some people say however that the rom runs slower than the previous versions, especially with gapps. For me personally it was still ok.
lord_wolf7 said:
How is the battery consumption?How is the camera?
Click to expand...
Click to collapse
Not worse than before with lineage at least. For what it's worth, there is actually a new lineage camera app now. And we were getting some good battery life results during the testing.
thanks for the update.
which gapps is recommended for los20
Option58 said:
I also think yes, but no one has tested this already. Note that you would surely need to reflash the same gapps package you were using before right after the new version flash.
I can't tell this for certain. It totally depends on your usecase and preferences. There aren't any unresolved bugs coming from previous versions (other than mentioned). Some people say however that the rom runs slower than the previous versions, especially with gapps. For me personally it was still ok.
Not worse than before with lineage at least. For what it's worth, there is actually a new lineage camera app now. And we were getting some good battery life results during the testing.
Click to expand...
Click to collapse
the gapps is not available for Android 13. Does it have Google apps?
Option58 said:
I also think yes, but no one has tested this already. Note that you would surely need to reflash the same gapps package you were using before right after the new version flash.
I can't tell this for certain. It totally depends on your usecase and preferences. There aren't any unresolved bugs coming from previous versions (other than mentioned). Some people say however that the rom runs slower than the previous versions, especially with gapps. For me personally it was still ok.
Not worse than before with lineage at least. For what it's worth, there is actually a new lineage camera app now. And we were getting some good battery life results during the testing.
Click to expand...
Click to collapse
What does Network traffic monitoring do? I switch off Mobile data and WIFI for many apps in the app settings. Without Network traffic monitoring, does it mean that separate app Mobile data and WIFI switching off will not work reliably? Or is it completely unrelated?
lord_wolf7 said:
the gapps is not available for Android 13. Does it have Google apps?
Click to expand...
Click to collapse
hodanli said:
thanks for the update.
which gapps is recommended for los20
Click to expand...
Click to collapse
I focused mainly on fixing rom bugs, so I haven't had much time to investigate the google apps situation.
But yeah they exist. They can be found using the link in the thread.
Flamegapps, Nikgapps and perhaps a several others are there for android 13 already.
Bried said:
What does Network traffic monitoring do? I switch off Mobile data and WIFI for many apps in the app settings. Without Network traffic monitoring, does it mean that separate app Mobile data and WIFI switching off will not work reliably? Or is it completely unrelated?
Click to expand...
Click to collapse
I believe that is unrelated. It is literally broken monitoring.
network monitor does not work
backup doesn't work properly
why is the battery mah 3600?
nikgapps go doesn't work properly
issues :
using qr scan notification panel causes settings to crash, HDCP checking causes minor lag, SRGB doesn't work , network monitor does not work, nikgapps go doesn't work properly, backup doesn't work properly

Categories

Resources