Database Develop

HELP! Bootloop after android pie update using Hisuite

Hi every one. I can't find solution to my problem so I decided to ask your help.
Few days ago I read that I can update my Huawei p10 to android pie officialy through Hisuite. Scanned for update and it said that I'm on the latest android which was emiui 5.1 so I started to look for a way to force it and found solution (will be posted bellow).
After it Hisuite found pie 9.0.1 update and after downloading the files it started installing it. After that it loaded 100% and rebooted, then rebooted again and again and again... shortly realised that it's bootlooping. Tried to turn it off and yet it kept bootlooping, took it apart disconected battery and hopped to enter recovery mode or fastboot, boot as soon as i plug the battery in and put usb or power on button same thing continued and i can't enter those modes whatever i do. Can anyone help me with this?
Oh yeah, I've tryied this methode on mate 9 pro from 5.1 to 9.1 and it worked flawlessly, then right next after that I attempted p10. Also i think i didn't do anything with firmware finder couse i saw update anyway.
Also on backup photo Details it shows build VTR-L09C432B171 ithat was before me trying to update it
Update methode
"Instructions how to get an authorized version of EMUI 9 on EMUI 9 via Firmware Finder
Attention, this method requires more success checks.
1. Add a line to C:\Windows\System32\drivers\etc\hosts
188.225.84.142 query.hicloud.com
2. Download and install HiSuite9.0.2.304, BUT NOT RUN:
3. Replace the files:
httpcomponent.dll move with the replacement in C:/Program Files (x86)/HiSuite or other directory in which the application is installed HiSuite
HiSuiteConfig.xml move with the replacement in C:/Users/YOURUSERNAME/AppData/Local/Hisuite/userdata/UpdateDogDev
4. Open FF (any, I like the smartphone to register - less action)
Looking for a permitted Android 9 for your device on the principle: device_model: VTR-L29 or VTR-L09,
NOTE: Firmware must be approved for your IMEI
Once again, make sure it is permitted, registers the update for eRecovery.
NOTE: There are two types of firmware: CHN, i.e. for Chinese devices and OVS, for all the rest. So if you do not have Chinese firmware, then you need to pay attention exclusively to OVS.
5. Run HiSuite, connect the device, looking for an update, update, enjoy."

IIm still lost. Is there anything i can do?

Huawei P9 Update. Please help me

Hi, for the past 4 hours i've been trying to update the huawei P9 to android 7 with firmware finder and i can't get that damn thing to work out.
I either get a failure of pakage verification even tho it said that the update is compatible with my phone or i just get a software failure and it says i can restart or go into erecovery. I've read through countless threads and i tried the suggested pause turn off the proxy and proceed the update and that didn't help either.
I don't know what to do anymore. Please help me internet

FlxF said:
Hi, for the past 4 hours i've been trying to update the huawei P9 to android 7 with firmware finder and i can't get that damn thing to work out.
I either get a failure of pakage verification even tho it said that the update is compatible with my phone or i just get a software failure and it says i can restart or go into erecovery. I've read through countless threads and i tried the suggested pause turn off the proxy and proceed the update and that didn't help either.
I don't know what to do anymore. Please help me internet
Click to expand...
Click to collapse
If you are stuck on Marshmallow (EMUI 4.x) with c900, see instructions how to rebrand and update to Nougat:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2

Can't update my ROG Phone II

Hello, recently just bought a ROG Phone 2 Tencent Edition from Ebay, when the device came everything was great. However i noticed that online it said that an update had come out which allows support for airtrigger sliding functions. Mine however did not have this. I went to the settings in order to try and update it, but it said that there was no update. So i then went ahead and downloaded an update form asus's website in an attemp to manually update it. But for whatever reason it said that the update was unsuccsessfull or something like that, and that it failed. I checked online and it said my finger print was still on CN however using device hw info it says im on "WW" fingerprint. My software version is 198.12. Please help!

HyphenZzX said:
Hello, recently just bought a ROG Phone 2 Tencent Edition from Ebay, when the device came everything was great. However i noticed that online it said that an update had come out which allows support for airtrigger sliding functions. Mine however did not have this. I went to the settings in order to try and update it, but it said that there was no update. So i then went ahead and downloaded an update form asus's website in an attemp to manually update it. But for whatever reason it said that the update was unsuccsessfull or something like that, and that it failed. I checked online and it said my finger print was still on CN however using device hw info it says im on "WW" fingerprint. My software version is 198.12. Please help!
Click to expand...
Click to collapse
https://forum.xda-developers.com/rog-phone-2/how-to/guide-to-check-change-fingerprint-cn-to-t4002279
Follow this guide to change fingerprint and update to 1910.33, from there download the raw 1910.44 and run flashall_AFT.cmd to update to latest version...
https://forum.xda-developers.com/rog-phone-2/how-to/raw-ww-1910-44-download-t4009293

reg66 said:
https://forum.xda-developers.com/rog-phone-2/how-to/guide-to-check-change-fingerprint-cn-to-t4002279
Follow this guide to change fingerprint and update to 1910.33, from there download the raw 1910.44 and run flashall_AFT.cmd to update to latest version...
https://forum.xda-developers.com/rog-phone-2/how-to/raw-ww-1910-44-download-t4009293
Click to expand...
Click to collapse
but i don't understand i am already on ww fingerprint???

HyphenZzX said:
but i don't understand i am already on ww fingerprint???
Click to expand...
Click to collapse
Ah sorry, misread your post. Just download the 1910.44 raw rom from the second link and extract to the root of C drive, remove the original zip file from the folder you extracted and then run flashall_AFT.cmd with the phone in fastboot mode (hold volume up and power together until you set a menu, that's fastboot mode) . It will take about 5 to 10 minutes to complete then the phone will restart. You will not lose any data... Good luck

reg66 said:
Ah sorry, misread your post. Just download the 1910.44 raw rom from the second link and extract to the root of C drive, remove the original zip file from the folder you extracted and then run flashall_AFT.cmd with the phone in fastboot mode (hold volume up and power together until you set a menu, that's fastboot mode) . It will take about 5 to 10 minutes to complete then the phone will restart. You will not lose any data... Good luck
Click to expand...
Click to collapse
hi thank you for the response when i open flash thing it just opens the cmd and closes again? what do i do?
edit never mind its doing it now thanks!

reg66 said:
Ah sorry, misread your post. Just download the 1910.44 raw rom from the second link and extract to the root of C drive, remove the original zip file from the folder you extracted and then run flashall_AFT.cmd with the phone in fastboot mode (hold volume up and power together until you set a menu, that's fastboot mode) . It will take about 5 to 10 minutes to complete then the phone will restart. You will not lose any data... Good luck
Click to expand...
Click to collapse
thank you so much it works now quick question can i do manual updates now and get the latest firmware?

HyphenZzX said:
thank you so much it works now quick question can i do manual updates now and get the latest firmware?
Click to expand...
Click to collapse
Well, up until 1910.44, we were able to just download the updates from asus and put them in the root of internal storage... But this changed for many users with the .44 update, so I'm not sure... We'll have to see how the next update goes, but yeah, it'll either be through download of ota or by flashing raw rom... Either way it'll be posted here by someone. Won't be long to wait as China versions already have update .52 update, WW comes shortly after

Hi there I am in a similar situation with a tencent rog 2 purchased on ebay that is on android 9 WW version. Is it possible to flash WW_ZS660KL_17.0240.2107.100_M3.23.44.20-ASUS_1.1.232_Phone-user.raw to get to android 10 immediately? I have attempted it just now but it appears the flashall_AFT.cmd is stuck and i have waited around 20 minutes.
edit: I waited an hour and nothing seemed to happen. so I restarted the phone and it seems like nothing happened at all. Any ideas?

edit: accidental double post

Help!!!! Mate 20 Pro (LYA-AL00) Chinese Version Stuck after dload to android 10

I considered myself to be noob here . It's my fault not to did a lot of research as possible before I proceed my upgrade since I wanted my Huawei Mate 20 Pro (LYA-AL00) (chinese version with no finger print) to run Android 10 instead of 9 (Which I didn't know what version I was using but I believe it was the latest of Android 9 for Mate 20 Pro). What I did was following this guide >
https://ministryofsolutions.com/202...-emui10-android-10-stock-firmware-update.html
everything described in the above link seems legit so I immediately follow step by step and download the stock firmware almost 5 hours. After using OTA with dload I saw the screen install the firmware successfully. However, after few minute the phone boot up and it showed "your device has loaded a different operating system". In such case, I couldn't do anything with erecovery or even using the hstool here: https://forum.xda-developers.com/mate-20-pro/how-to/manual-upgrading-mate-20-pro-bl-locked-t3905924
by using the method above, i stuck at (install recovery or install system) where my phone screen show circle with 5% processing, then hi suite say failed recovery. In such case, I believed I might install the wrong firmware which isn't allow for my phone? If it is wrong why the phone allow to install the firmware via dload? If not compatible or wrong should not let user process the work.
Right now I stuck at (Your device is loaded a different operating system) and nothing I can do in erecovery including using wifi to update. Can anyone help? Thank you
Sorry for my bad english.

NEED HELP !!!! same problem on lya l09
i used hisuite to update my mate 20 pro LYA L09 to emui 10 ( the official way ) after the update was installed my phone was stuck in this black screen " your device has loaded a different operating software " . i tried using erecovery " get package info failed"

OTG DLoad package method, if works you will be fine. If not, try DC phoenix with a Dload package. Last time I experienced same thing. Then DC phoenix helps.

Hi guys I am new and have a question directly

I own a Rog Phone 5s (ZS676KS) since one week and tried to install TWRP without success. The result was a bricked phone and stressful days with no prospect of a solution. In this forum I found the following tutorial and completed it successfully
Repair ROG Phone 5S through edl firmware, no need to unlock Bootloader to modify COUNTRY CN to WW
Success is disgusted by some people, and will not share any files for free in the future.
forum.xda-developers.com
The update via the settings does not work, no update is found. So I downloaded the latest firmware from Asus and saved it in the internal memory. After restarting the phone I get a message that a system update is available, but it ends in an error message. I have tried the same with the previous firmware versions, but without success.
I would be very happy if someone has a solution to this problem.

RT3K said:
I own a Rog Phone 5s (ZS676KS) since one week and tried to install TWRP without success. The result was a bricked phone and stressful days with no prospect of a solution. In this forum I found the following tutorial and completed it successfully
Repair ROG Phone 5S through edl firmware, no need to unlock Bootloader to modify COUNTRY CN to WW
Success is disgusted by some people, and will not share any files for free in the future.
forum.xda-developers.com
The update via the settings does not work, no update is found. So I downloaded the latest firmware from Asus and saved it in the internal memory. After restarting the phone I get a message that a system update is available, but it ends in an error message. I have tried the same with the previous firmware versions, but without success.
I would be very happy if someone has a solution to this problem.
Click to expand...
Click to collapse
Hello and welcome to XDA,
This is intros section, you might have better chances on your devices section.
Good luck.