Related
Hey guys, i have MI A2 cellphone, and after auto update programmed to three hours the smartphone show "AndroidONE" logo and then shutdown, i tried "Fastboot oem unlock", but it is my output:
PHP:
C:\Users\Lucas Daniel>fastboot oem unlock
FAILED (remote: 'Flashing Unlock is not allowed
')
Finished. Total time: 0.000s
. I'm desperate, I do not know what to try anymore, I believe I do not have unlock OEM activated, someone can help me?
Sorry for bad english, i'm from brazilian.
@LukeSkyPTBR
It's a well-known issue. One update was revoked as soon as Xiaomi has found out about phones bricking once it's installed. There's no way you can fix it by yourself except if you have ordered your phone from China (and so no warranty you have) and have experience in disassembling phones. There's a thing called test-point, do some research if you are self-assured in that area. Otherwise let your authorized service center make everything for you. It is a warranty case, either way.
sas.mar said:
@LukeSkyPTBR
It's a well-known issue. One update was revoked as soon as Xiaomi has found out about phones bricking once it's installed. There's no way you can fix it by yourself except if you have ordered your phone from China (and so no warranty you have) and have experience in disassembling phones. There's a thing called test-point, do some research if you are self-assured in that area. Otherwise let your authorized service center make everything for you. It is a warranty case, either way.
Click to expand...
Click to collapse
Thanks, looks that, unfortunately, my unique solution is test-point for activate EBL Mode... I will leave the topic open for the case of i get other solutions... after 3 days, if not get, i will close and the unique solution will really test-point.
Try rebooting it a couple of times and see if it boots. Or plug it to a charger and try booting it once it starts to charge successfully. If all fails, flashing via EDL might be your only option.
Try rebooting more than couple of time. Phone is supposed to switch to the other slot of A/B where original ROM (before update) resides. When it finally boots, get developer rights, switch on ADB Debugging and OEM unlock, thus next time update soft-bricks your phone you'll be able to unlock (or even better unlock immediately after successful boot not to loose your data in future).
Isnt Fastboot OEM Unlock command deprecated ? Shouldn't you use the unlock / unlock critical command ?
Tianhe said:
Isnt Fastboot OEM Unlock command deprecated ? Shouldn't you use the unlock / unlock critical command ?
Click to expand...
Click to collapse
What is it command?
Aerobatic said:
Try rebooting more than couple of time. Phone is supposed to switch to the other slot of A/B where original ROM (before update) resides. When it finally boots, get developer rights, switch on ADB Debugging and OEM unlock, thus next time update soft-bricks your phone you'll be able to unlock (or even better unlock immediately after successful boot not to loose your data in future).
Click to expand...
Click to collapse
How can I do it? I leave the phone in the charger for a long time? Or do you need the power button for a long time?
I tried to press the power button for 2 minutes and nothing happened.
When i leave the smartphone on the charge, after 50 minutes, show for me 100% percent, so, i pressed power button and the screen stayed lock in "AndroidONE", nothing happened, until try again press power button.
The problem original comebacked to me
LukeSkyPTBR said:
What is it command?
Click to expand...
Click to collapse
I tried, the same ploblem happenned... don't work, unfortunely... :/
LukeSkyPTBR said:
What is it command?
Click to expand...
Click to collapse
fastboot flashing unlock
fastboot flashing unlock_critical
Can't you just enter fastboot mode by holding power and vol- keys with phone connected to a PC?
(Or power and vol+, can't remember)
Phil_Smith said:
fastboot flashing unlock
fastboot flashing unlock_critical
Can't you just enter fastboot mode by holding power and vol- keys with phone connected to a PC?
(Or power and vol+, can't remember)
Click to expand...
Click to collapse
I can enter fastboot mode, but this is not enough to do run commands up. I would need unlock bootloader(OEM).
LukeSkyPTBR said:
I can enter fastboot mode, but this is not enough to do run commands up. I would need unlock bootloader(OEM).
Click to expand...
Click to collapse
If you can enter fastboot then you can go to EDL mode by typing 'fastboot reboot edl' and then use QPST to flash the latest stock rom.
LukeSkyPTBR said:
I can enter fastboot mode, but this is not enough to do run commands up. I would need unlock bootloader(OEM).
Click to expand...
Click to collapse
Do as tabun1994 said.
This will hopefully get the system up again.
The commands I wrote would unlock the bootloader. What else could I have meant?
If you succeeded with tabun's method, then you probably would only need to enable "USB debugging" and "OEM unlocking" in the ROM's developer options (which you'll enable by hitting "build number" in settings like 10 times or so).
Then you would connect the device and accept the 'trust this device' warning.
After booting to fastboot now, the commands I wrote should work and unlock the bootloader (if you even want that when your system is running again).
tabun1994 said:
If you can enter fastboot then you can go to EDL mode by typing 'fastboot reboot edl' and then use QPST to flash the latest stock rom.
Click to expand...
Click to collapse
This command needs OEM Unlock :/
this is my output: fastboot: usage: unknown reboot target edl
The test point method is actually easy , you have to dissasemble the display , easy procedure , remove the battery and short the two test points with tweezerz or something ,and in the meantime you plug the usb cable into the computer. It should install the Qusb_Hub drivers , and with miFlash you should be able to reflash the firmware . I bought a phone that was in this state and fixed it using these steps.
No more solutions, I will do the test point method, thanks to everyone who tried to help otherwise.
LukeSkyPTBR said:
This command needs OEM Unlock :/
this is my output: fastboot: usage: unknown reboot target edl
Click to expand...
Click to collapse
No it doesn't, i have tried this method on locked bootloader, go to this link - https://forum.xda-developers.com/an...e-how-to-reboot-to-edl-fastboot-t3394292/amp/
And download the fastboot_edl.7z , your phone will be in edl mode, I think you don't have the proper platform files which has caused the problem.
tabun1994 said:
No it doesn't, i have tried this method on locked bootloader, go to this link - https://forum.xda-developers.com/an...e-how-to-reboot-to-edl-fastboot-t3394292/amp/
And download the fastboot_edl.7z , your phone will be in edl mode, I think you don't have the proper platform files which has caused the problem.
Click to expand...
Click to collapse
Okays, thanks for this solution, i will get the smartphone tomorrow, if the technical assistance not resolved my problem, i will try. Thanks very much!
LukeSkyPTBR said:
Okays, thanks for this solution, i will get the smartphone tomorrow, if the technical assistance not resolved my problem, i will try. Thanks very much!
Click to expand...
Click to collapse
I execute bat archive but nothing happens in Mi A2 .-
tabun1994 said:
No it doesn't, i have tried this method on locked bootloader, go to this link - https://forum.xda-developers.com/an...e-how-to-reboot-to-edl-fastboot-t3394292/amp/
And download the fastboot_edl.7z , your phone will be in edl mode, I think you don't have the proper platform files which has caused the problem.
Click to expand...
Click to collapse
What is your smartphone?
Hello everyone today i flash an incompatible rom with twrp and my screen turn completely black After reboot twrp in recovery .
Do you have solution ?
Sorry for my bad English
Hi if you can open bootloader, flash stock rom
The easy solution is press power+volume down. Phone should boot into fastboot mode. Then flash fastboot ROM without relocking the bootloader.
The other way is taking phone to service center. They'll flash stock in edl mode.
I can't seem to put it in fastboot mode. but by pressing the 3 buttons or by changing the buttons I managed to put it in something else I think that at times I manage to put it on a fastboot but the screen always remains black impossible to know i have this message in device manager (Unknown usb devices request for descriptor) do you think it causes me to reinstall drivers what could be the cause? how to adjust as soon as i can connect it so l is not a Qualcomm USB hs 2008.
Miui 13 said:
I can't seem to put it in fastboot mode. but by pressing the 3 buttons or by changing the buttons I managed to put it in something else I think that at times I manage to put it on a fastboot but the screen always remains black impossible to know i have this message in device manager (Unknown usb devices request for descriptor) do you think it causes me to reinstall drivers what could be the cause? how to adjust as soon as i can connect it so l is not a Qualcomm USB hs 2008.
Click to expand...
Click to collapse
Doesn't EDL need authorized mi account these days? It'd better to visit service center because installing EDL driver & all the fuss will be useless
May be you can find some drivers which can recognise your phone to work with ADB in fastboot and flash a new ROM. If that doesn't work, then a service center is the next best option.
Miui 13 said:
I can't seem to put it in fastboot mode. but by pressing the 3 buttons or by changing the buttons I managed to put it in something else I think that at times I manage to put it on a fastboot but the screen always remains black impossible to know i have this message in device manager (Unknown usb devices request for descriptor) do you think it causes me to reinstall drivers what could be the cause? how to adjust as soon as i can connect it so l is not a Qualcomm USB hs 2008.
Click to expand...
Click to collapse
Sounds like your device boots into EDL mode, likely due to a corrupted bootloader from the incompatible firmware you've flashed. If you have the EDL firehose files for your device, you can use QFIL to flash a compatible ROM, alternatively try to EDL flash the boot partition with a working boot (that may get you from EDL to a soft brick with a working bootloader and Fastboot - from there you can try try and flash a working firmware).
RAMBO29 said:
May be you can find some drivers which can recognise your phone to work with ADB in fastboot and flash a new ROM. If that doesn't work, then a service center is the next best option.
Click to expand...
Click to collapse
I unfortunately tried to install all the drivers but nothing has worked difficult to know if a fastboot is started it's a hassle when the screen is completely black even with the task manager open I don't I did not succeed finally I ended up paying someone who had me unlock my phone it cost me 29 € my phone is now unlocked which I can advise on the other hand for those who would like to install roms or root their phone is good it is to wait until no auth file is leaked
Andrologic said:
Sounds like your device boots into EDL mode, likely due to a corrupted bootloader from the incompatible firmware you've flashed. If you have the EDL firehose files for your device, you can use QFIL to flash a compatible ROM, alternatively try to EDL flash the boot partition with a working boot (that may get you from EDL to a soft brick with a working bootloader and Fastboot - from there you can try try and flash a working firmware).
Click to expand...
Click to collapse
I see it's super interesting as information I did not know that we could flash only a partition with QFIL.
Unfortunately I could not find the firehose files for the phone as the phone is probably very recent.
I had to pay someone to unlock my phone with an edl account of course .
My work now
Was the unlocking done in person or online? Anyways glad to see it's sorted out.
Miui 13 said:
I unfortunately tried to install all the drivers but nothing has worked difficult to know if a fastboot is started it's a hassle when the screen is completely black even with the task manager open I don't I did not succeed finally I ended up paying someone who had me unlock my phone it cost me 29 € my phone is now unlocked which I can advise on the other hand for those who would like to install roms or root their phone is good it is to wait until no auth file is leaked
Click to expand...
Click to collapse
RAMBO29 said:
Was the unlocking done in person or online? Anyways glad to see it's sorted out.
Click to expand...
Click to collapse
yes it was done online I unlocked it with TeamViewer thanks to an edl account
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Obi_Wlan said:
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank but phone simply dont booting to fastboot mode.
Durien Daragoth said:
Thank but phone simply dont booting to fastboot mode.
Click to expand...
Click to collapse
You have to experiment with some button combinations. I ran into the same problem with a different phone two years ago. Read everything about this even if fastboot isn't working right now.
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo] Reboot to EDL mode from FASTBOOT! No more Test Point Method needed ;) Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot...
forum.xda-developers.com
Service centre will be your best bet
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Player__y said:
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Click to expand...
Click to collapse
If you have any, let me know on discord, 𝑃𝑙𝑎𝑦𝑒𝑟#2028
Thx but phone dont booting to fastboot mode so i cant flash boot.img i tryed now SP Flash too in linux and still same errors becouse phone disconecting too fast. I think technician service will be solution..
Dont use The daanm Sp flash Tool , Its for mediatek devices, USE Miflash, and Its impossible a phone dont boot in fastboot mode, try again, pls hold The button
I have both Mi flash and SP flash tool
Without fastboot you cant do much...
in Miflash it dont do anything even device it dont see on COM3
in SP flash too it react but with errors becouse of disconecting
phone dont boot right becouse both A and B boot images are corrupted.
Does your screen at boot turn red? I've done everything on my cell phone, several things have happened to me and not once did fastboot have a problem, because fastboot is a totally different place to boot, there is only this possibility if you used commands in adb to remove or do something in fastboot that made it useless, it's impossible to happen this in the way you said
yes i did adb commands in fastboot becouse i instaled recovery and this all happend after reboot
no problem doing things in adb, I said in the sense that you deleted fastboot in adb but that didn't happen by the way you said
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Obi_Wlan said:
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Click to expand...
Click to collapse
I tryed but not succes. It just booting every 5s nowhere. Cant get to EDL mode sorry. And correct turn off phone isnt possible i have to unplug battery flex cable but i also tryed. Only possible state where it dont restarting is when battery is unpluged and i connect phone on cable with pc and pressing volume down+power. But connection to COM3 is only 2s.
Well, in that case you need to short the test points on your motherboard and plug the phone into your PC at the same time.
Watch several videos related to it on YouTube first.
Wait, is your phone Redmi Note 11 or 11s?
I will try the point test. I have Redmin Note 11s.
Ahhhh...you posted it on Note 11 forum.
Can't help you mate. Things are more complicated in mediatek devices.
Still, this thread might help a little. Good luck.
(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
Now i have bit progress with python im able to hold COM3 port connection around 60s. But when i start SP Flash Tool it will always make error. STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001) and STATUS_ERR (0xC0010001) , STATUS_BROM_CMD_FAIL
I finally managed to connect device for longer time cca 1 min with MTKMETAUtilityV49 and it helped me also disable auhorized connection for SP Flash tool V5. By this i formated whole disc except bootloader. Now phone dont self restarting so it is prepared for instal fresh rom. I think this will be again problem becouse i geting this error after few seconds of flashing: STATUS_SEC_IMG_TOO_LARGE
I've already google it, and my phone keep rebooting to the main system.
FYI, my bootloader is still locked.
Any help would be greatly appreciated! Thanksss
IvanR8 said:
I've already google it, and my phone keep rebooting to the main system.
FYI, my bootloader is still locked.
Any help would be greatly appreciated! Thanksss
Click to expand...
Click to collapse
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to your PC. You need to time it perfectly.
It will automatically boot into EDL mode.
Obi_Wlan said:
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to your PC. You need to time it perfectly.
It will automatically boot into EDL mode.
Click to expand...
Click to collapse
Thanks, but have you try it on this phone? coz I've tried that way, still no luck
IvanR8 said:
Thanks, but have you try it on this phone? coz I've tried that way, still no luck
Click to expand...
Click to collapse
Try getting into fastboot, and:
Code:
fastboot reboot emergency
If you don't succeed, then the phone itself doesn't have EDL mode.
georg3_ said:
Try getting into fastboot, and:
Code:
fastboot reboot emergency
If you don't succeed, then the phone itself doesn't have EDL mode.
Click to expand...
Click to collapse
Yes, I think this phone doesn't have EDL mode.. But, FYI the command is correct, but it still go straight to the OS..
F you Xiaomi, what is your goal to make us to wait 168hour just to unlock the bootloader??? F YOU!!!
If you still have warranty you can get fixed from a Xiaomi service center for free, however if now I'm sure they'd still fix it maybe for a small fee
try:
Code:
fastboot oem edl
IvanR8 said:
Yes, I think this phone doesn't have EDL mode.. But, FYI the command is correct, but it still go straight to the OS..
F you Xiaomi, what is your goal to make us to wait 168hour just to unlock the bootloader??? F YOU!!!
Click to expand...
Click to collapse
All Qualcomm devices have EDL mode, on locked bootloader, you can't boot as easy as pressing any buttons or through ADB/fastboot commands, you need to unlock it firstly, or using the test point method.
In all my previous unlocked Xiaomi devices I have booted to EDL mode by pressing both volume buttons, I didn't try it with this device though.
I was trying to flash a new rom and accidentally hit "boot to fastboot" in the pixel experience recovery
now when i try to boot it goes black and i cant get back into recovery at all
when i put it into fastboot it isn't detected by my computer.... am i screwed?
Worst case just blank flash
Arealhooman said:
Worst case just blank flash
Click to expand...
Click to collapse
How do i do that?
Download Mi Flash Tool and flash Stock.
JingleDraws said:
I was trying to flash a new rom and accidentally hit "boot to fastboot"....
Click to expand...
Click to collapse
Have you tried a very, very long press on power to start up?
Had you flashed already that new rom and pressed then boot to fastboot instead of boot to recovery?
Elinx said:
Have you tried a very, very long press on power to start up?
Click to expand...
Click to collapse
Hey @Elinx you try to help everyone. I like that
Laptapper said:
....you try to help everyone....
Click to expand...
Click to collapse
I try , like you do too, but sometimes I forgot my crystal ball to understand the question.
Elinx said:
I try , like you do too, but sometimes I forgot my crystal ball to understand the question.
Click to expand...
Click to collapse
Yep....me too....but new members have a child protection
This just happened to me on the same recovery. I cleared my storage/cache ect then clicked boot to fastboot to flash a new recovery this then led to me just having a black screen.
Also mi flash seems to require fastboot in which my device is not showing.
Also thanks for any help anyone gives
WeeScottishMan said:
.... just having a black screen.
...
Click to expand...
Click to collapse
A black screen does mostly mean that the phone is started in EDL mode.
That is why I advice first to try a very long press on power.
You could check this inside device manager on PC, with or without the right USB drivers.
(Qualcomm HS-USB QDLoader 9008)
Flashing from EDL isn't possible without Mi authorisation as long there isn't a hacked firehose file.
Holding power seems to just be turning it off and on again. Also I cannot seem to find the phone on device manager although it plays the connection sound and refreshes when plugged in and turned on. Do you know where I would find it in device manager.
Thanks again for the help
oh wait yes it is in edl mode does that mean I am massively screwed :<
Thanks again.
WeeScottishMan said:
... yes it is in edl mode does that mean I am massively screwed....
Click to expand...
Click to collapse
If the phone does start black again after very long press.
Yes, you are screwed up with EDL and you need to go to a Mi service center, or try an "online unbrick service" with Teamviewer from a third party.
I'll seek out an online unbrick service if I can since I do not live near any mi service centers.
I did suspect it might be EDL but I am glad I now know it is.
Thank you so much for helping and also for the amazingly quick responses I hope this helps out the guy who posted this thread.
I'll post an update if I get it fixed, I won't give up that easily
WeeScottishMan said:
I'll seek out an online unbrick service if I can since I do not live near any mi service centers.
I did suspect it might be EDL but I am glad I now know it is.
Thank you so much for helping and also for the amazingly quick responses I hope this helps out the guy who posted this thread.
I'll post an update if I get it fixed, I won't give up that easily
Click to expand...
Click to collapse
I don't find the reason, in any of your posts, why it would be bricked. If your device is not really bricked, then to get it out, you have to press the three buttons at the same time for about 9 seconds, while you see the changes in device manager PC, so you can see in which mode it is. Eventually in the booting process, change the hardware buttons as if you will send it to fastboot or recovery mode, it doesn't matter the display is showing nothing, just check the device manager to have an idea.
Thanks for your suggestion.
I tried that yet it still shows the Qualcomm HS-USB QDLoader 9008 (COM3). I am also a bit confused why it has bricked since I really didn't think I had done anything wrong :/
mine appears in device manager, is that a good sign? what do i do from here
WeeScottishMan said:
I'll post an update if I get it fixed, I won't give up that easily
Click to expand...
Click to collapse
if you do get it fixed please let me know what they did so i can do it as well! thank you and good luck!! ...at least this isn't my main phone..
Be sure to try all the methods to get it in other modes, it's just a timing thing, while device goes from a state to another, then you should try one time to enter to fastboot, and in a new cycle reboot, try to enter to recovery mode, BUT If the device, can't definitely enter to recovery nor fastboot mode, and it always redirects to Qualcomm HS-USB QDloader 9008 (apart than shutting down), then it's bricked.
EDL mode, using MiFlash tool requires a Mi authorized account, just older devices can use it for free, this is not the case, unfortunately.
Instead, you can try with other Qualcomm flasher tool, like QPST, not sure if it still works for this device (for older it does), you should give it a try.
@SubwayChamp is right about that.
There is a difference if EDL came out of the box or after an attempt to update or other flashing attempt.
That is why to try all possibilities to get into fastboot or recovery.
So try Vol up+ Vol down+power, Vol up+power, Vol down+power and only power always first to see if you can get out of EDL.
You can try QPST too, but search for some HowTo with pictures, because it isn't the same as Miflash and is a bit complicated if you never used it.
There still isn't a modded firehose file (prog_ufs_firehose_sm7150_ddr.elf) for RN10P to pass Mi authorization, but there is a very small chance that QPST does work.