hi so i bought OP3T to have nethunter on it. but now i am totally confused how to install nethunter on my device properly, there needs to be an updated guide about it that i couldn't find in xda forums.
first about my phone:
it's OP3T on nougat, OOS 4.1.7 . currently i'm using latest official LOS 14.1 rom.
with Encryption enabled, on LOS stock kernel.
What i tried is this thread,
https://forum.xda-developers.com/oneplus-3t/development/kernel-kali-nethunter-oneplus-3t-t3507816
and i downloaded
nethunter-generic-arm64-kalifs-full-rolling-3.20-20170903-2143.zip
kernel-nethunter-oneplus3T-cm-nougat-3.20-20170903-2143.zip
by following above guide i went into TWRP recovery i flashed kernel which also flashed supersu with it, and then flashed kali nethunter,
everything went perfect, no problems, but i can't use kali nethunter, its terminal does not open,
on above thread @uaiclout pointed to following thread to use that build,
https://forum.xda-developers.com/oneplus-3/development/kernel-boeffla-kernel-linaro-uber-t3455888/
but when i went to that thread that is a kernel and not a rom, and not a nethunter build,
i don't understand what do i have to do to make NetHunter work properly? and there is no specific thread / guide on it. i don't wanna brick my phone so taking my steps carefully, as i am new in OP3T and coming from Samsung devices there are some new strange abbreviations being used in OP3T forums which i don't know what they mean.
like bootloader thing is not being mentioned in OP3T forums but firmwares (i am confused what they are?) and like kernels are using some strange terms,
so it will be very thankfull for someone who uses NetHunter on OP3T successfully to create a guide or atleast tell others how you made it work on nougat LOS or other non-stock based custom roms? and kernels + wifi devices to be detected on phone like TL-WN722N ?
thanks in advance.
Hello Mate,
Welcome to the OnePlus fam!
So as I've understood, your Kali Terminal is not working. I've had the exact issue, and I fixed it by reinstalling the Terminal apk ;(https://github.com/offensive-securi...thunter-installer/update/data/app/Term-nh.apk)
If you're getting a chroot error, uninstall the chroot, and re-download it from Chroot Manager.
To correct your misunderstandings, Firmware is the base software of the phone, which has Modem information, etc etc. Firmware is released by OnePlus, and it has minor changes and tweaks with every new version. Developers can choose any Firmware version to build their ROM over it. So if you're installing a new ROM, make sure to check the Firmware version. If your current firmware version is below the required version for the ROM, TWRP will give you a "Error=7" when flashing the ROM.
Kali Nethunter is a Kernel for OP3/3T, not a ROM. Make sure you've flashed the correct Zip file, as there are many versions, one for OOS stock, another for LOS, and so on and on.
Also for using Kali for Wi-Fi related purposes, I must warn you that it is not legal, but if you must, then there is a specific Wi-Fi adapter to be used with the 3/3T. I will update you on what the exact model is, and it is quite inexpensive on eBay.
I advise you to use Kali on OOS, rather than LOS, as it is more stable on OOS.
Cheers!
thes3usa said:
Hello Mate,
Welcome to the OnePlus fam!
So as I've understood, your Kali Terminal is not working. I've had the exact issue, and I fixed it by reinstalling the Terminal apk ;(https://github.com/offensive-securi...thunter-installer/update/data/app/Term-nh.apk)
If you're getting a chroot error, uninstall the chroot, and re-download it from Chroot Manager.
To correct your misunderstandings, Firmware is the base software of the phone, which has Modem information, etc etc. Firmware is released by OnePlus, and it has minor changes and tweaks with every new version. Developers can choose any Firmware version to build their ROM over it. So if you're installing a new ROM, make sure to check the Firmware version. If your current firmware version is below the required version for the ROM, TWRP will give you a "Error=7" when flashing the ROM.
Kali Nethunter is a Kernel for OP3/3T, not a ROM. Make sure you've flashed the correct Zip file, as there are many versions, one for OOS stock, another for LOS, and so on and on.
Also for using Kali for Wi-Fi related purposes, I must warn you that it is not legal, but if you must, then there is a specific Wi-Fi adapter to be used with the 3/3T. I will update you on what the exact model is, and it is quite inexpensive on eBay.
I advise you to use Kali on OOS, rather than LOS, as it is more stable on OOS.
Cheers!
Click to expand...
Click to collapse
now i am on latest PA official rom, i'm gonna try again. i like non-stock based roms because they allow device encryption with root (which stock roms don't allow) and i always keep my device encrypted as a security and ethical hacking student . i try to secure my devices from every new hack i learn. but i heard when you install NetHunter on Android, its security is compromised already, anyways,
as i mentioned the zips i downloaded from NetHunter builds, do you see any wrong zip? i downloaded kernel for CM based roms and also generic NetHunter,
which exactly Rom+Kernel combinations you have if you are using NetHunter? my device was on OOS 4.1.7 before i installed LineageOS 14.1 official on it. so suggest me the better OOS? and i will have to download anyway coz i lost my original backup of stock OOS 4.1.7 .
about wifi devices, i have 3 devices.
1. TP-LINK TL-WN722N
2. ALFA AWUS036H
3. ALFA AWUS036NH
none of them was detected by NetHunter app info screen, i heard on kali nethunter thread that TP Link TL-WN722N works, but it was not detected. but i can buy new device if needed, thats not a big issue, though it would be better if i can make one of above device to work with it. and there is a discussion on it that i will check if my NetHunter works properly first.
about the firmwares, i still don't get it, correct me if i'm wrong,
let say my phone was on OOS 4.1.7 when i bought it, then i rooted and installed TWRP on it, then i installed LineageOS 14.1 on it. so technically i am still on firmware 4.1.7 ? is that what you mean?
so if i want to install CM 13 on my device i will have to check what firmware is CM 13 build upon and flash that firmware before i flash CM 13 ? is that right?
so there is no trouble of bootloaders in OP3T as it was in samsung ? like in note 5 i upgraded to nougat and then i wanted to go back to lollypop but i couldn't because newer bootloader didn't allow me to go back, and i had to do some exercise to downgrade bootloader to lollypop before i could install any lollypop rom. so in OP3T firmware is to be flashed before installing certain roms is same like bootloaders was in samsung?
is it safe always to go back and forth in firmware flashings? if i wanna install lollypop rom i just flash that firmware which that rom is built upon and i am good to go? and then if i want to come back to nougat rom i just flash specific firmware and i'm good to go? (i know i am totally confused in this system, but i think i got it right now?). please confirm if all i said about firmwares is right or wrong so i can understand :fingers-crossed:
thanks
It sounds like the issue is that you are using PA. Their source is usually not CM/LOS based. I don't know about the newest versions though or if NetHunter has a PA compatible version.
Sent from my OnePlus 3T using XDA Labs
MrMeeseeks said:
It sounds like the issue is that you are using PA. Their source is usually not CM/LOS based. I don't know about the newest versions though or if NetHunter has a PA compatible version.
Sent from my OnePlus 3T using XDA Labs
Click to expand...
Click to collapse
no no, i am now on PA, but i tried NetHunter in LOS official 14.1
Hello, does anyone know how to install or is it even possible to install kali nethunter on my note 8 (N 950f). Magisk module does not work (Android 9 if helps)
Saafir said:
Two words young blood - Locked Bootloader.
Click to expand...
Click to collapse
Young blood its fully rooted and all, some modules work like yt vanced, but some dont for example like kali nethunter. Correct me if im wrong but i couldmt root my phone with locked bootloader.
I have been trying to install Kali Linux on AZMP M1
So,here is my work so far
1)TO install simply kali linux
Download linux deploy app from Google Play Store and install Kali Linux on the device although u will not be able to hack/deauth wifi cause it need kernal support or a wire less adapter but,Kali is pretty much fun!!
You can refer Kali website for detailed instructions xda is not letting me post any links so i hope you undustand
2)TO install Nethunter:- Download nethunter rom from Kali website since i am on pixel experience 9.0 i have downloaded one plus 7 pie nethunter rom Then go to /data/app and install the apps present in that folder one by one.Also download and install nethunter module from magisk!
You can read the article in android authority'e website.
In nethunter also you need some kernal support for hid and wireless attacks but nevertheless, we have nethunter running on our AZMP m1
*Remember to install busy box in system/bin if nethunter terminal is not working!!
*both minimal and full croot is working!!
At the end thank you and a request to devolopers to devolope kernal for nethunter for AZMP m1 or to port nethunter rom from one plus 7.Thank you!
I had successfully installed full kali nethunter. What kernel is working for max pro m1?
I've seen there are many custom roms for RN9s and RN9 Pro. Why does our RN9 doesn't have? Will there be roms for us someday? Just bought the phone and thought there were roms I can install
I think its up to xiaomi, because ROM's devolopers usually waits for the official kernel source to be uploaded by the manufacturer. This reason might explain why there are plenty of Redmi Note 9 Pro/S ROMs (already with kernel source uploaded) but not even a fully functional TWRP recovery for Redmi Note 9. We might need to wait for xiaomi official kernel source for RN9 to start seeing functional stable ROMS running out.
ma259 said:
I think its up to xiaomi, because ROM's devolopers usually waits for the official kernel source to be uploaded by the manufacturer. This reason might explain why there are plenty of Redmi Note 9 Pro/S ROMs (already with kernel source uploaded) but not even a fully functional TWRP recovery for Redmi Note 9. We might need to wait for xiaomi official kernel source for RN9 to start seeing functional stable ROMS running out.
Click to expand...
Click to collapse
Where does xiaomi release the official kernel source code (which website?)
Evan_Ferrao said:
Where does xiaomi release the official kernel source code (which website?)
Click to expand...
Click to collapse
Here, at official Xiaomi Github channel:
https://github.com/MiCode/Xiaomi_Kernel_OpenSource
Maybe we should wait, RN9 still a new device. And there just an Unofficial TWRP, maybe after the official TWRP got released we will got some custom ROM.
I suggest you to keep on stock rom firmware only.
Root it with magisk. Flash it with twrp.
And everything is fine.
If you want to know what is working for MERLIN, take a look: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4204873/
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
I want to install Kali Nethunter on my rooted OP3T. How ever the download page says "OnePlus 3/3T (Ten)," Should this work on LineageOS 18.1 despite it being 11? I don't really want to have to wipe and flash a different ROM just to install it, especially since stock ROM only goes to Pie. If so, can anyone give me a fairly up-to-date tutorial on how to install it? I'm currently watching this David Bombal video on how to install it on a 7T, and I am hoping the install instructions would be the same. (yes, I did post this on another OP3T forum, but realised it was the wrong one and am awaiting it to be removed)
Do you have any updates on it? Asking cuz I couldn't find any available LineageOS based on Android 10 to download.
lemongrass1717 said:
Do you have any updates on it? Asking cuz I couldn't find any LineageOS based on Android 10 to download.
Click to expand...
Click to collapse
Nah, I've sorta given up on the project. Maybe try and find a LOS 14.1 download? Apparently this uses Ten and works with NetHunter
I discovered 17.1 uses 10 Android, not sure if NetHunter supports it. But few years ago I tried to run NetHunter on not officially supported device, it kinda worked but required LineageOS + generic NetHunter + custom kernel. Maybe it'll work for 3T.