Hey all, so Ive been lurking for a few weeks now about about to order a N3 thru ATT. Im actually coming from a Nexus 5 where things are very easy so bear with me. Just wanted to get clarity before I made a purchase
1. Not so much related to root but Im planning to get the phone, root it, and apply the Xposed modules, to see if I can live with Touchwiz. Im assuming (will need to confirm) that ATT would take back within 14 days if it doesnt go so well, assuming I dont trip warranty flags, etc. Anyone know their policy?
2. From my reading, to root this, I actually need to run a lower firmware. Is this still 4.3 or is it like 4.2.2?
3. The general process is to open device, keep off wifi, oneclick it, odin it, apply root. They to disable OTAs via Titanium Backup. Is this correct?
4. Does doing the above method trip any flags? I believe there are two, a KNOX one and a general Custom one
5. Similarly, if the answer is yes, are there methods to get it back.
6. Limitations of the root method above is that still no access to custom recoverys, so no ROMs, but the xposed framework should work just fine. Also TB cannot do restores? Anything else Im missing?
7. Last one, regarding the older firmware, any idea what is different between the rooted firmware and the 'now current' one? I mean besides probably added security to prevent root. Any actual bug fixes or features?
Sorry if most of these are obvious but appreciate the confirmation!
Thanks
1. You don't need to live with touchwiz - you can hack it up (there are modded versions with minor changes) or just replace it with Nova Launcher. Nova doesn't even need root....
2. No, this is not true. You can root via RDLV on MI9 firmware, or use Kingo root on later versions (however, there has been debate over whether kingo has malware). If you have MJ5 firmware, you cannot root via RDLV, at least not at the moment (and cannot downgrade). You can keep root with RDLV after upgrading by using supersu survival mode, according to others (I haven't tried this myself, since the update checks builtin apks and won't install if you've modified SecLauncher4.apk to customize touchwiz, so i'd have to revert that...)
3. No. See the RDLV thread, it's a bit more complicated. For kingo, I don't know anything about the process.
4. Makes it custom, but does not trigger Knox flag.
5. Custom can be undone by returning to stock. Knox is an e-fuse and can never be reset.
6. XPosed and TB work fine.
7. Was wondering the same thing myself.
Thanks. Regarding Touchwiz, as soon as the device is rooted I plan to put Nova Beta on there as well as Wanom for Xposed to more simulate the stock experience. Plus drop most of the stock Samsung apps in favor of Googles.
It sounds like a need to read up more on the firmware and root method. I suppose the RDLV was for an older firmware which, if Im buying the phone now, may no longer be possible
Is MI9 the default stock firmware the phone had been shipping with, or is it now shipping with MJ5? (or is MJ5 an OTA update only)?
Thanks!
Hello everyone,
I have to say I am completely lost regarding the whole rooting process for the XZ1C. I usually manage to get where I want just by carefully reading the forums, but with this device, I feel overwhelmed by information. And I sometimes feel like what I am reading contradicts what I though I understood from previous reads...
I will try to sum up what I know so far.
First of all, I have a just-out-of-the-box Sony model G8441 with firmware 47.1.A.12.179 / Oreo 8.0.0 (never been connected to the outside world yet), and I want to properly root the device and install TWRP with no loss of feature.
What I think I understand:
To root, I first need to unlock the bootloader, which seems to be a trivial operation. However, this will break some functionalities due to DRM keys being erased. Once it is done, there is no way, ever, to get them back. There are however ways to "trick" DRM-related functionalities into believing DRM keys are still there.
Alternatively, there seems to be a way to backup the DRM keys prior to unlocking the BL, and this backup can somehow be reused and injected back into the unlocked device. If true, then this would certainly be a preferable method than the previous one, which would then be obsolete. However, it obviously doesn't look obsolete when I read the related topics, so I must be missing something...
Another thing I noted (but do not quite understand): There are ROMs for this device that "include" a DRM fix.
Last important thing I read: there is a paid "do-it-all" tool which takes my locked device and, with one click, makes it unlocked - rooted - DRM-fixed - TWRP-enabled. Now that sounds really good! Maybe too good?
As far as i know (but I learn new stuff every day on this topic) this DRM stuff is the main difficulty here. I understand that the rest of the process (root + TWRP) will be much simpler (although I'm old-school and completly missed all this magisk trend...!)
What I don't understand:
I read that some people downgrade to Oreo to be able to root properly, and at the same time, I read that Pie removed the restrictions on unlocked bootloader. So I still have no idea if I should connect and receive Sony updates, or avoid them.
Another thing I don't get, is how many ways do we have to root this thing? In the past, I was used to see, for a specific device, always one major and widly used rooting method. Here I fail to identify it...
What I think I will do:
1. Backup TA partition with j4nn's tool. This will probably imply flashing an older firmware right? Is there any link that could help me with this flashing process? (I only know Odin - did I mention old-school?) I saw this page for generic sony Z devices, but the thread is from 2013 and now closed. Is it still up-to-date or is there a newer thread?
2. Unlock bootloader and restore TA partition.
3. Wait for Sony updates? Or should I first hide unlock status?
3bis. Alternaltively to waiting for updates, maybe I can just flash the latest build? (47.2.A.8.24 if I am not mistaken)
4. Flash modpunk's TWRP.
5. Flash janjan's Boot.img to get root functionalities?
Alternaltively to all the above (except maybe step 1 that I will probably do in any case), buy the paid all-in-one tool (Xperifix), plug, click and wait... But will I really end up the same as with the manual way?
I saw a few other methods in the forums but it seems my brain is currently refusing to bring them back...
That's all I have right now. I would really appreciate if you guys could share some insight and tell me what you think about this, whether there are missing steps, useless steps, incorrectly ordered steps, silly steps, or if I'm just completely wrong about the whole thing.
Feel free also to correct me on the assumptions I made at the beginning.
Thank you very much for reading this repulsive piece of text.
SunJu22 said:
I would really appreciate if you guys could share some insight and tell me what you think about this
Click to expand...
Click to collapse
By the looks of it you have done a great deal of research on the project.
Yes, go down the route of backing up your TA partition first, but that is not a small step in itself, it's pretty complicated and if you get that working then the rest of the project will be a breeze.
You don't say what version of firmware you want to end up on. If you want to end up on Pie then forget the DRMfix . But if you're staying on Oreo and can't be bothered with lots of files & flashing, then this is the easy way out, I bought the paid version and can verify it works.
More recently I ended up janjan's kernel (Oreo build). Hidden root (Google Pay works), lots of performance tweaks, DRM completely working.
It's unlikely that anyone will bother making a DRM fix for Pie as the camera works and there are only a couple of other features that get disabled.
It sounds like you're not the sort of person who's only going to read the first couple of pages of a thread (or the last) flash the xxxxxx and then complain when it's broken.
The people on the forum here are very helpful and if you go into any of the threads you mentioned in your post with a question, you'll get a reply.
Good luck.
I agree, there is a lot of information out there and different methods of achieving what you want - very confusing if you have not been following the threads since the beginning.
In my opinion, the preferred method is j4nn's method outlined here: https://forum.xda-developers.com/xp...devonly-exploits-temp-root-to-backup-t3795510
Use that post as your main guide (the final step in that guide, #13, is how you will achieve root). You will use Newflasher to flash the various firmwares along the way (this is linked from j4nn's procedure in step #2). User munted made a very detailed pdf file that fills in some of the details on j4nn's procedure - see the following post and download the pdf attached: https://forum.xda-developers.com/showpost.php?p=78255334&postcount=382
Most of the other methods out there came before j4nn's work - they didn't include DRM backup/restore.
If you follow j4nn's procedure, you won't need to use the janjan kernel as you assumed - janjan method is different and does not overlap with j4nn.
SunJu22 said:
Feel free also to correct me on the assumptions I made at the beginning.
Click to expand...
Click to collapse
Sorry, I didn't point out that I was one of the early 'jumpers' who unlocked their bootloader without any backups, so I have been forced into always using fixes and all the information I have is based on having to fix your phone for it to work, but that's all changed now. I'm so out of date :-/
@camaro322hp is right, if you follow j4nn's method correctly you'll be rooted with no DRM loss. All of the other stuff is not required.
Thank you Digesteve and camaro322hp for your help.
From what I understand the XZ1C didn't get as much love as other devices, thus there was a long period of tinkering before a "do-it-all guide" could be considered "the" solution. That could explain all these different approaches that are proposed. Like you said camaro322hp it's rather difficult to jump on this train, and I can only guess how interesting this ride has been.
Anyway, I didn't see that the TA backup thread from j4nn also encompassed all the information I needed; I am glad to finally know that there is indeed a centralized "do-it-all guide" . To make it easier for XZ1C newcomers, I think j4nn should update his opening post to make this clearer.
Since I managed to grab the attention of 2 XZ1C power users, I would like to ask you: Did you keep stock? Did you try alternative ROMs? Do you like some of them? Do you prefer Oreo or Pie?
For information, the most up-to-date experience I have on a Android phone is my LG90 with CyanogenMod 11 (KitKat 4.4.4! Yes sir!). I heard that it's becoming less and less useful to flash a custom ROM due to major OS improvements, but I would still enjoy the simplest and lightest Android possible.
SunJu22 said:
Did you keep stock? Did you try alternative ROMs?
Click to expand...
Click to collapse
I've always been on stock, the camera is an important part of what I want from my phone and although there's lots of alternative camera apps, there's no competition to the stock camera app. Then I theme it black with swift installer and just uninstall or freeze any apps I don't want with Titanium Backup. I have stuck with Oreo, everything works perfect and I remember seeing so many people jumping to 9 then wanting to go back to 8 because they didn't like it. Something about changing the way the drop down menu works, among other things, but having never installed it, I'm not the person to comment on if it's any good or not.
I have been watching the XZ1c thread and Lineage is gaining ground, it even has a stock camera now. I would have thought something like that with miniGapps is going to be pretty lightweight and very similar to your carbon rom of before. At the moment this is based on 8, but is working well. Depends how keen you are to move to Pie.
Thank you Digesteve.
One thing I still don't understand. Part of the process is to hide unlock status. If I do this, FOTA will be applied and I will automatically end up on Pie, right? Should I skip this step if I want Oreo?
EDIT: when you say "a stock camera", you mean the Sony camera?
@SunJu22 I've stuck with the Sony ROM. A rooted stock ROM meets all my needs, so I've never felt the need to experiment with custom ROMs. There are some custom options out there that people seem fairly happy with, so if that's your thing, I'd encourage it.
Without going into too much detail, I'm still on Oreo for the moment, for a variety of reasons, but I don't know of anything that would keep me from recommending Pie.
One thing you should note is that once you unlock, there is no going back. AFAIK there is no known or working method to relock the bootloader.
SunJu22 said:
FOTA will be applied and I will automatically end up on Pie, right? Should I skip this step if I want Oreo?
EDIT: when you say "a stock camera", you mean the Sony camera?
Click to expand...
Click to collapse
Yes, I'm not entirely sure why having your rooted phone try and update itself is an advantage, but something I'd recomend avoiding.
Stock camera is the Sony camera, yes.
Thank you everyone, I believe I now have enough information to jump into this with confidence. The adventure begins, and will be reported in this thread for future reference, in the hope that it will help others like me!
Well, I am a bit sad... I wanted to report my "adventure" here in detail, but I'm afraid I have nothing to say.
Indeed, following the procedure from j4nn with a printed copy of munted's awesome guide, I managed to do all I wanted on the first attempt.
I don't have anything to add to this guide, everyone wanting to root their XZ1C can do it just by reading the opening post from j4nn and the mentioned guide. It takes a bit of time but nothing complicated thanks to the clear and detailed explanations.
I now have a fully functional rooted XZ1C (including camera) on Pie with Magisk root and TWRP.
Thank you all again from pointing me to the right direction.
I however have a slight disappointment. I wanted to start with Oreo and make an Nandroid backup before moving to Pie, but I didn't find Oreo builds on Xperifirm. So I jumped straight to Pie.
In case I want to test Oreo, I read that a downgrade is more complicated than an upgrade, but apart from the fact that a factory reset is needed for downgrade, I couldn't find an explanation for this. Any idea?
Last but not least: I looked for the latest Oreo build version number but couldn't find it. Do you guys know what it is and where I can download it?
I guess this will be all for this thread after this. Although it is very convenient to have my own thread to ask questions rather than finding the relevant page for each one, I don't want to annoy you too much...
EDIT: Please ignore the last question. I found out last Oreo build is 47.1.A.16.20, and I found the files via the download link in the opening post of the Lineage thread.
SunJu22 said:
In case I want to test Oreo, I read that a downgrade is more complicated than an upgrade, but apart from the fact that a factory reset is needed for downgrade, I couldn't find an explanation for this. Any idea? Lineage thread.
Click to expand...
Click to collapse
There is an easy solution to downgrade:
Newflasher
Hi, I've been thinking about rooting my XZ1c for a long time now. So, do I understand correctly that the ONLY disadvantage compared to non-rooted device is not possible to receive the OTA updates from Sony anymore?
mEREHAIGE said:
Hi, I've been thinking about rooting my XZ1c for a long time now. So, do I understand correctly that the ONLY disadvantage compared to non-rooted device is not possible to receive the OTA updates from Sony anymore?
Click to expand...
Click to collapse
No, you can flash a kernel to hide the bootloader unlock flag, this will mean that you will receive OTA updates, although depending on how you're rooted an update will most likely break your phone, so not that useful.
*made a thread*
Thanks--rooted withOUT adventure too
Very happily rooted now. Just wanted to say a quick thanks and add a few notes:
1. j4nn's renoroot to enable TA key backup and restore is fantastic. My advice: use and donate
2. munted's guide is excellent. clear and thorough...a rare combination.
3. do expect that renoroot may need to be restarted a couple of times. it took me 3 or 4 attempts to get temp root to pull the TA keys, although it took only 1 effort to get root back to restore.
4. topjohnwu's magisk is, of course, a key component to all this. Thx and $s there too.
I did a few things slightly differently/additionally than SunJu22.
5. I am on T-Mobile US, so I opted to create a hybrid Pie FW to get wifi calling and VoLTE. There are a number of discussions on this. I did it by combining the vendor**.sin and system**.sin files from custom-CH FW with the other files from custom-US FW. Of course (a) use IDENTICAL release numbers only, e.g. 47.A.2.10.28 w/ 47.A.2.10.28 and (b) you still need to delete .TA and persist files from the hybrid before you flash it.
Note: I don't really care about these features, but I have *heard* that T-mobile won't allow BYOD on their band-12 sites if they don't have VoLTE. Don't know if it is true (or where it is true) but figured why not?
6. I decided (for now, at least) to leave boot and recovery stock. So, I am using fastboot to run TWRP or a rooted kernel. Thanks again to j4nn for the method.
Note: I don't plan on allowing FOTA upgrades---I just like passing all the security checks and being able to *see* if updates are available.
That's all. Fine work in development and guides has made life simple and happy for me
kirkzp said:
Very happily rooted now. Just wanted to say a quick thanks and add a few notes:
1. j4nn's renoroot to enable TA key backup and restore is fantastic. My advice: use and donate
2. munted's guide is excellent. clear and thorough...a rare combination.
3. do expect that renoroot may need to be restarted a couple of times. it took me 3 or 4 attempts to get temp root to pull the TA keys, although it took only 1 effort to get root back to restore.
4. topjohnwu's magisk is, of course, a key component to all this. Thx and $s there too.
I did a few things slightly differently/additionally than SunJu22.
5. I am on T-Mobile US, so I opted to create a hybrid Pie FW to get wifi calling and VoLTE. There are a number of discussions on this. I did it by combining the vendor**.sin and system**.sin files from custom-CH FW with the other files from custom-US FW. Of course (a) use IDENTICAL release numbers only, e.g. 47.A.2.10.28 w/ 47.A.2.10.28 and (b) you still need to delete .TA and persist files from the hybrid before you flash it.
Note: I don't really care about these features, but I have *heard* that T-mobile won't allow BYOD on their band-12 sites if they don't have VoLTE. Don't know if it is true (or where it is true) but figured why not?
6. I decided (for now, at least) to leave boot and recovery stock. So, I am using fastboot to run TWRP or a rooted kernel. Thanks again to j4nn for the method.
Note: I don't plan on allowing FOTA upgrades---I just like passing all the security checks and being able to *see* if updates are available.
That's all. Fine work in development and guides has made life simple and happy for me
Click to expand...
Click to collapse
Now riddle me this cause I'm on Tmo USA as well and I did the hybrid work fine as well but heres the question, does googlepay and banking apps still work with a unlocked bootloader or did you flash a modified kernel to hide the unlocked status.
Sitting on the fence about unlocking mine so I can do a full nandroid before trying out some gsi pie roms infact this is the first phone I haven't unlocked or least put twrp on since my samsung sidekick 4g o.o
kernel with hide-unlock
T_Tank said:
Now riddle me this cause I'm on Tmo USA as well and I did the hybrid work fine as well but heres the question, does googlepay and banking apps still work with a unlocked bootloader or did you flash a modified kernel to hide the unlocked status.
Sitting on the fence about unlocking mine so I can do a full nandroid before trying out some gsi pie roms infact this is the first phone I haven't unlocked or least put twrp on since my samsung sidekick 4g o.o
Click to expand...
Click to collapse
Full disclosure: I don't use Google pay or too many banking apps, so YMMV. But, I am using j4nn's kernel with unlock hidden. (See link in my note 6.) You can flash this, or you can leave in your stock kernel and merely fastboot to this. From what I have seen, it hides most - if not all -- indicators that the phone is rooted and the BL in unlocked.
Does somebody has :
G8441_1310-7123_47.1.A.16.20-R7B_Customized_CE1.ftf ?
Only backup i did not make, and its gone from XperiFirm.
Still have the feeling battery life was better in Oreo, and would be nice for experimenting.
Would be nice.
Thanks in advance.
I usually root every phone, but since this is something I do once a year, I tend to forget some basics (so bear with me). Other things, I actually never really knew.
Until now, rooting a phone and flashing a custom rom (or the factory image) were "one and done" things and I simply never updated my phone ever again, since OTA no longer works once the bootloader is unlocked, and installing a newer image forced me to wipe everything in TWRP or else I could no longer read the encrypted memory. Of course, that also forced me to re-root my phone and reinstall everything. A bit too much of a hassle for monthly security updates...
Nowadays, however, updates and security patches are more important than ever. And since I just received my rootable SD N9600, I want to do it correctly this time and stay up do date.
This begs the question: How *do* I stay up to date without basically factory-resetting, re-formatting and re-rooting my phone every month for every security update?
Google showed me a few solutions.
Pixel phones apparently have A/B partitions and a TWRP script. Not an option for the Note 9, though.
Flashfire apparently was the perfect solution that did exactly what I was looking for, but it has been abandoned by Chainfire and unfortunately it no longer works with newer Magisk versions. Even when I downgraded to a super old Magisk version, it would ultimately crash when starting the app (after receiving root permissions). So it doesn't seem to work, although staying on an old version of Magisk forever would not be an ideal solution anyway.
Is there anything like Flashfire or a simpler approach that I am missing?
Surely, I can't be the only rooted user who wants to install monthly security patches without wiping the entire phone.
Spaced Invader said:
I usually root every phone, but since this is something I do once a year, I tend to forget some basics (so bear with me). Other things, I actually never really knew.
Until now, rooting a phone and flashing a custom rom (or the factory image) were "one and done" things and I simply never updated my phone ever again, since OTA no longer works once the bootloader is unlocked, and installing a newer image forced me to wipe everything in TWRP or else I could no longer read the encrypted memory. Of course, that also forced me to re-root my phone and reinstall everything. A bit too much of a hassle for monthly security updates...
Nowadays, however, updates and security patches are more important than ever. And since I just received my rootable SD N9600, I want to do it correctly this time and stay up do date.
This begs the question: How *do* I stay up to date without basically factory-resetting, re-formatting and re-rooting my phone every month for every security update?
Google showed me a few solutions.
Pixel phones apparently have A/B partitions and a TWRP script. Not an option for the Note 9, though.
Flashfire apparently was the perfect solution that did exactly what I was looking for, but it has been abandoned by Chainfire and unfortunately it no longer works with newer Magisk versions. Even when I downgraded to a super old Magisk version, it would ultimately crash when starting the app (after receiving root permissions). So it doesn't seem to work, although staying on an old version of Magisk forever would not be an ideal solution anyway.
Is there anything like Flashfire or a simpler approach that I am missing?
Surely, I can't be the only rooted user who wants to install monthly security patches without wiping the entire phone.
Click to expand...
Click to collapse
n9600 has limited development from the community. so if you are not going to flash a custom rom( usually thats how people stay up to date) then you will have to go through the rooting procedure each time.
bober10113 said:
n9600 has limited development from the community. so if you are not going to flash a custom rom( usually thats how people stay up to date) then you will have to go through the rooting procedure each time.
Click to expand...
Click to collapse
So every solution that makes this easier is strictly device-specific and nothing like Flashfire (which would have worked regardless of community activity for the N9600) exists anymore?
Dark times indeed, almost makes me question if I should keep rooting my devices...
I have rooted note8 with decrypted data partition (no-verity... something script). I updated recently to newest firmware simply through odin. I flashed firmware preserving data (home csc file?). There was bootloop but after i flashed twrp and rooted with magisk phone started without problem and all settings and data was there. So this is solution for me, maybe it will work on note 9 too.
Spaced Invader said:
So every solution that makes this easier is strictly device-specific and nothing like Flashfire (which would have worked regardless of community activity for the N9600) exists anymore?
Dark times indeed, almost makes me question if I should keep rooting my devices...
Click to expand...
Click to collapse
Personally I'm sticking with phones officially supported by lineageOs (formerly cynogenmod) from now on.
Kriomag said:
I have rooted note8 with decrypted data partition (no-verity... something script). I updated recently to newest firmware simply through odin. I flashed firmware preserving data (home csc file?). There was bootloop but after i flashed twrp and rooted with magisk phone started without problem and all settings and data was there. So this is solution for me, maybe it will work on note 9 too.
Click to expand...
Click to collapse
Hi, I have a Note 9 that was rooted with Magisk and running on Oreo 8. I updated it via Odin to Android 10. I have a bootloop. What should I do? Please help me
I am currently rooted running stock A11. I noticed that the update to A12 is now available. Just for fun, I checked updates on my phone & it says there is an update for A12 available. I thought being rooted, with the boot-loader unlocked, I wouldn't get updates. But there it is, asking me to download it.
Would it work if I downloaded and installed it via OTA on my phone? Would it wipe all my data (internal storage) and un-root me? Would it brick me? Just asking because I thought the proper way to update while rooted was this way (step #4), but doing it via OTA doesn't get much easier.
I am currently happy with how my phone is set up and running. I don't have an urgent need to update and really dislike setting up a phone as new. Of course, if an update to new a new OS is available...I'm going to want to install it eventually.
Thanks for the advice!
I'm not going past Q on my stock N10+'s, one still running very well on Pie. It's load is over 1.5 years old.
The first thing I do on my stock phones is disable OTA Updates. I may eventually update the Pie one to Q but it's more restrictive than Pie. I gain some nice features and it runs a bit faster, but loose some functionality as well.
Security simply isn't an issue with Pie in everyday use. Q may prove more troublesome.
Going to R would break them. It's a mess. CPU cycle burning scoped storage and tard repetitive security permissions. All my apps are vetted and trusted, many wouldn't load on R. Some aren't replaceable like my free office app which I use a lot. Plus forced encryption on first boot up... trashware.
Trust 12 to be better? When pigs fly.
Rule #1, if your OS is running fast, stable and fulfilling its mission let it be.
At the best you'll waste a lot of time that wasn't worth the trouble and at the worst end worse off than before. I'm not buying the hype.
mn1968 said:
I am currently rooted running stock A11. I noticed that the update to A12 is now available. Just for fun, I checked updates on my phone & it says there is an update for A12 available. I thought being rooted, with the boot-loader unlocked, I wouldn't get updates. But there it is, asking me to download it.
Would it work if I downloaded and installed it via OTA on my phone?
Click to expand...
Click to collapse
Yes, you can update via OTA.
mn1968 said:
Would it wipe all my data (internal storage) and un-root me?
Click to expand...
Click to collapse
The OTA preserves /data, but because it updates the boot image, you will lose root.
mn1968 said:
Would it brick me? Just asking because I thought the proper way to update while rooted was this way (step #4), but doing it via OTA doesn't get much easier.
Click to expand...
Click to collapse
Why would an OTA update brick your device? The answer is no. However, due to Android Verified Boot features, you will need to disable both dm-verity and vbmeta verification in order to flash and boot a patched boot image. Unfortunately, this has required a data wipe to work. Those of us on the Pixel 5 are experiencing the same issue and are still working on the "why". If you leave /vbmeta and /boot stock, you can still temporarily boot a patched image....which just means that you'll lose root when you reboot.
mn1968 said:
I am currently happy with how my phone is set up and running. I don't have an urgent need to update and really dislike setting up a phone as new. Of course, if an update to new a new OS is available...I'm going to want to install it eventually.
Thanks for the advice!
Click to expand...
Click to collapse
Understandable. As I mentioned above, if you want to upgrade to Android 12 and have permanent root, it's likely that you will have to wipe. However, you can try following this guide and see if it works for you. Be warned, the user that posted that was on the 12 Beta, and had wiped previously when upgrading from Android 11. It won't cause a brick, but you may still have to wipe your device. If you're prepared to bite that bullet, you can give it a try.
Ultimately, you have 3 options:
Stay on Android 11 with root
Upgrade to Android 12, keep data, but lose root
Upgrade to Android 12, most likely wipe data, and reroot.
blackhawk said:
Rule #1, if your OS is running fast, stable and fulfilling its mission let it be.
At the best you'll waste a lot of time that wasn't worth the trouble and at the worst end worse off than before. I'm not buying the hype.
Click to expand...
Click to collapse
There is a certain degree of logic to this. I used Windows 7 and refused to update to 8.1 or 10 for a long time. Now that I'm on 10 Enterprise LTSC, I'm refusing to upgrade to 11. If it ain't broke, don't fix it.