Hey, i have a problem since my last update for my Banking App (VR-SecureGo; Update to 20.27.0 (from 20.23.0 i think)). The problem is that Magisk is getting detected even with Magisk Hide enabled, repackaged Magisk Manager and passing SafetyNet.
I don't know what can I do to bypass this root detection. I can't downgrade version anymore because the last version isn't supported anymore.
My specifications:
Device: Pixel 2 XL
Version: Android 11
ROM: Stock (Rooted with Magisk boot.img)
Installed Magisk: v22.1
Installed Magisk Manager Version: v22.1
Installed Magisk Modules: Universal SafetyNet Fix
(EdX/LS)posed: Not installed (anymore; tried to bypass detection with LSPosed and XPrivacyLua spoof, but don't work)
Edit: Before anyone refers me to the other posts, i've already seen them and tried their solutions, but none of them work
PS: Sorry for my bad english, I'm german
Did you try freezing the hidden magisk app prior starting the banking app?
This is the only working solution i could find for DKB Tan2Go.
JMaster7 said:
Hey, i have a problem since my last update for my Banking App (VR-SecureGo; Update to 20.27.0 (from 20.23.0 i think)).
Click to expand...
Click to collapse
The same here of course :-(
I tried all too, only restoring the last backups (made with swift backup) did help for now.
VR SecureGo, PSD-SecureGo and PSD.Banking app are affected.
These apps did work with Magisk 22.x and Edxposed.
ratelutz said:
Did you try freezing the hidden magisk app prior starting the banking app?
This is the only working solution i could find for DKB Tan2Go.
Click to expand...
Click to collapse
Can you please explain a bit more, what you mean?
Very simple:
Configure magisk hide, hide the magisk app, freeze the hidden magisk app, start your banking app
ratelutz said:
Very simple:
Configure magisk hide, hide the magisk app, freeze the hidden magisk app, start your banking app
Click to expand...
Click to collapse
Thx.
ratelutz said:
Very simple:
Configure magisk hide, hide the magisk app, freeze the hidden magisk app, start your banking app
Click to expand...
Click to collapse
Yes, this works but a little laborious :-(
Thank you.
tramp20 said:
Yes, this works but a little laborious :-(
Thank you.
Click to expand...
Click to collapse
Yes, annoying if done manually.
But this can be automated with Tasker.
As i tap (start) my banking app,
Tasker:
-kills it right again
-freezes the hidden magisk app
-and restarts the banking app
jokk3l said:
Yes, annoying if done manually.
But this can be automated with Tasker.
As i tap (start) my banking app,
Tasker:
-kills it right again
-freezes the hidden magisk app
-and restarts the banking app
Click to expand...
Click to collapse
And the most reliable and fastest method is using logcat reader and reacting on app started event
ratelutz said:
Very simple:
Configure magisk hide, hide the magisk app, freeze the hidden magisk app, start your banking app
Click to expand...
Click to collapse
i have similar problem with other app
so what do you mean by (freeze the hidden magisk app)
ratelutz said:
And the most reliable and fastest method is using logcat reader and reacting on app started event
Click to expand...
Click to collapse
This!
abogrhen said:
i have similar problem with other app
so what do you mean by (freeze the hidden magisk app)
Click to expand...
Click to collapse
Magisk Manager app can be hidden (repacked/renamed) to make it harder to be detected.
Freezing can be done via apps like airfrozen or via shell command "pm disable-user <PACKETNAME>"
jokk3l said:
This!
Magisk Manager app can be hidden (repacked/renamed) to make it harder to be detected.
Freezing can be done via apps like airfrozen or via shell command "pm disable-user <PACKETNAME>"
Click to expand...
Click to collapse
The hide already done
but the freezing is new to me
i will try
Thanks. Airfroze did help me to bypass root check.
ratelutz said:
And the most reliable and fastest method is using logcat reader and reacting on app started event
Click to expand...
Click to collapse
How can I do that? Freezing Magisk does work for me. The method jokk3l described is a bit buggy on my phone. I have to open the VR Banking app twice. But thank you jokk3l, that's better than doing evertyhing by hand.
Edit: YouTube helps! Thank you for posting your solutions!
Was there another update? I rooted just yesterday and can't get SecureGO to work at all.
I'm using Magisk 23.0 on Android 10.
I already renamed Magisk, activated MagiskHide and used airfrozen to freeze the renamed app, but SecureGO refuses to start
For me it works just fine with freezing Magisk.
Maybe you need to clear cache and data of securego first after you renamed and hid magisk!?
paulquappe said:
For me it works just fine with freezing Magisk.
Maybe you need to clear cache and data of securego first after you renamed and hid magisk!?
Click to expand...
Click to collapse
Tried freezing, then clearing data / reinstalling SecureGo and even then it doesn't start.. is there any way to check if other apps can "see" the root? I'm wondering whether MagiskHide even works at all..
I got same problem here but with another bank app, C6 Bank.
The way I could have it working with root is on Android 10. With Android 11 can't make it run anymore.
Hi @ all.
I had the same problem with the vr securego app. It helped to completely uninstall Magisk and reinstall it again. Then the work around works with the Magisk hide, Hide Magisk app and freeze. Many greetings
FreezyLemon said:
Tried freezing, then clearing data / reinstalling SecureGo and even then it doesn't start.. is there any way to check if other apps can "see" the root? I'm wondering whether MagiskHide even works at all..
Click to expand...
Click to collapse
Did you solve your issue with this app? Having LOS 18.1, Magisk 23.0 with MagiskHide and freezed the app by with Airfrozen but it does not work. Neither VRSecure-GO nor DKB-Tan2GO are working anymore
Related
I recently rooted my new Mi A2 Lite using Magisk.
So my current banking app detected the root and now I cannot use it anymore. I tried Root Cloak and MagiskHide but both of them did not work either. It still shows the message saying my phone is rooted.
How do I debug that now. I need it to be working anyhow.
App: K-Plus; play.google.com/store/apps/details?id=com.kasikorn.retail.mbanking.wap
https://didgeridoohan.com/magisk/MagiskHideHidingRoot
arunsharmaofficial said:
I recently rooted my new Mi A2 Lite using Magisk.
So my current banking app detected the root and now I cannot use it anymore. I tried Root Cloak and MagiskHide but both of them did not work either. It still shows the message saying my phone is rooted.
How do I debug that now. I need it to be working anyhow.
App: K-Plus; play.google.com/store/apps/details?id=com.kasikorn.retail.mbanking.wap
Click to expand...
Click to collapse
I recently had the same problem, but with a different banking app.
What helped me in the past was to hide Magisk Manager with a random package name. It is an option in Magisk Manager itself. Unfortunately it doesn't work anymore but i could mask Magisk Manager with the Samsung app S Secure and now it's working again .
This was included in my Galaxy S7 ROM so you probably need to find the apk for the app or find a similiar working app for your phone model.
Hope this helps.
Daci54 said:
I recently had the same problem, but with a different banking app.
What helped me in the past was to hide Magisk Manager with a random package name. It is an option in Magisk Manager itself. Unfortunately it doesn't work anymore but i could mask Magisk Manager with the Samsung app S Secure and now it's working again .
This was included in my Galaxy S7 ROM so you probably need to find the apk for the app or find a similiar working app for your phone model.
Hope this helps.
Click to expand...
Click to collapse
Alright! Can you clarify what on how to hide Magisk with a different package name. I am still pretty new to Magisk. Thanks.
arunsharmaofficial said:
Alright! Can you clarify what on how to hide Magisk with a different package name. I am still pretty new to Magisk. Thanks.
Click to expand...
Click to collapse
Open Magisk Manager, go to settings and tap on Hide Magisk Manager. If your banking app doesn't work right away try a restart. If it still doesn't work try to mask Magisk Manager with S Secure or similiar apps.
The magisk hide feature does not work
nm180618 said:
The magisk hide feature does not work
Click to expand...
Click to collapse
It does work, the steps I took were:
1) Install Banking app
2) Open it and get notified about the phone being rooted
3) Use Magisk Hide feature to hide the Banking app
4) Go to phone's app settings
5) Baking app settings
6) Clear storage data (Clearing only the cache could work too, I didn't test it)
7) Profit!
Hope that works for you.
Magisk hide doesn't seem to be working for me. Magisk says it's working and safety net passes, but I've tested multiple apps and they can see that I'm rooted. Hiding magisk with a random package name doesn't work either.
Yesterday I installed magisk and went to hide options and checked my banking app. I was amazed to see banking app allowing me to do everything without limited functionality due to "root" like before. But today banking app detected root again and limited all functions, how? There haven't been any updates for banking app yet it seemed to no longer be fooled by magisk.
Same goes for me with the K-Plus app as well. (สวัสดีคับผม) Use Magisk Hide to hide the root access but it crashes the bank app instead.
Not sure what I've missed.
Gpay and banking are still detecting root/custom rom
Magisk and manager installed.
module SaMoDXv1 installed.
Safteynet is showing green
gpay and banking apps hidden
Using hide magisk function
removed all Magisk related stuff from SD card.
Cleared cache from gpay and banking apps .
Turned off usb debugging.
What else is there?
Just installed root checker basic, it sees root. I hide magisk from it and it still sees root. Is that right?
beythas said:
Same goes for me with the K-Plus app as well. (สวัสดีคับผม) Use Magisk Hide to hide the root access but it crashes the bank app instead.
Click to expand...
Click to collapse
Try following the 'Promon' section in https://github.com/Ingan121/UDSBypass
Hi,
I'ould like installing Fde.ai on my One plus 6 rooted with Ice Renovate 11.1 rom, but I'm not sure that installation is compatible with "Rice tweaks", a tweak app for this rom no my device.
Peraphs there is someone who does know the answer?
Tks and regards.
Roberto
What I do
Go to setting -> Magisk Hide -> disable then enable.
This way worked with me .
I used Magisk Manager v 7.2.0 (213).
Magisk v 19.3 (19300).
What worked for me is using the "Hide Magisk Manager" feature in settings. Now apps are not promoting about device being rooted and are running fine now.
Anyone solved this problem?
I still have a banking app with this problem. I tried many times but still not working.
Magisk hide dont work for this app.
nguyenlinh said:
Anyone solved this problem?
I still have a banking app with this problem. I tried many times but still not working.
Magisk hide dont work for this app.
Click to expand...
Click to collapse
So far there are very few apps that I've seen that can not be tricked with tips from the guide linked in the second post of this thread. Give it a shot...
Can you try it?
https://play.google.com/store/apps/details?id=vietcombank.itcenter.smartotpcorp
I Cannot run this app.
Thanks
nguyenlinh said:
Can you try it?
https://play.google.com/store/apps/details?id=vietcombank.itcenter.smartotpcorp
I Cannot run this app.
Thanks
Click to expand...
Click to collapse
Runs fine with the app on the Hide list and the Magisk Manager repackaged with a random name.
More:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
Can someone check this for me?
https://play.google.com/store/apps/details?id=no.apps.dnbnor&hl=en_US
Iam using MH v60 with 19.3 still nothing. Iam fighting with that about 4 months now((((
Details: Huawei P20 Pro running 9.0. Magisk Manager v7 (latest), Magisk v18.2 (latest canary) original package name. Safety net passed.
I tested to make sure that magisk hide is working properly on my device. https://play.google.com/store/apps/details?id=com.revolut.revolut&hl=en_GB. This app does not have fingerprint login enabled without magisk hide. Hence when I turn off magisk hide, you can't use fingerprint to login into the app. When I turn it back on, fingerprint login works. Also my bank app works.
Here is the problem. https://play.google.com/store/apps/details?id=com.starlingbank.android&hl=en_GB. This app does not seem to run even when magisk hide is on. Here's the kicker, even though magiskhide has been toggled and confirmed working, upon opening this app it will show the usual "device not secure/rooted" message. After this it somehow disable magiskhide as my revolut app no longer prompts for fingerprint and my bank app stops working.
I have to go back into magisk and retoggle magisk hide for it to work again. (However the starling bank app still fails the root check)
I'm really really frustrated now and will appreciate any help.
UDPATE: I did some stuff from https://forum.xda-developers.com/apps/magisk/how-to-bypass-lloyds-root-detection-t3837206, the adaway host list. Added MagiskHide Props Config. I also set tasker to toggle magiskhide whenever I turn on my screen. Seems to work more consistently for now
Check the Magisk main thread and Github, there is a known problem with Magisk Hide in the 18.x. I went back to 17.x which work for me without any problems.
lambstone said:
Details: Huawei P20 Pro running 9.0. Magisk Manager v7 (latest), Magisk v18.2 (latest canary) original package name. Safety net passed.
I have to go back into magisk and retoggle magisk hide for it to work again. (However the starling bank app still fails the root check)
I'm really really frustrated now and will appreciate any help.
Click to expand...
Click to collapse
If Magisk Hide Of Magisk 18.x Is Working Intermittently (Which Means Also The Device Will Not Pass The SafetyNet Sometimes), Try To Use The Module Of Microsoft Intune Company Portal Hider Which Includes Also The Functionality Of Re-Enabling Magisk Hide Every 5 Min. For Magisk 18.x From This Thread https://forum.xda-developers.com/apps/magisk/module-microsoft-intune-company-portal-t3780451. Awaiting Your Feedback.
Dreamer(3MF) said:
The Functionality Of Re-Enabling Magisk Hide Every 5 Min
Click to expand...
Click to collapse
Doesn't this cause battery drain?
akxak said:
Check the Magisk main thread and Github, there is a known problem with Magisk Hide in the 18.x. I went back to 17.x which work for me without any problems.
Click to expand...
Click to collapse
Hi, some questions. Do I have to install also the Manager v6.10 to install Magisk v17.3? Or can I leave the last Manager? Then, I uninstall Magisk from the app and them I flash the v17.3 from (temporary) TWRP, is it correct?
Simone_ASR said:
Hi, some questions. Do I have to install also the Manager v6.10 to install Magisk v17.3? Or can I leave the last Manager? Then, I uninstall Magisk from the app and them I flash the v17.3 from (temporary) TWRP, is it correct?
Click to expand...
Click to collapse
The latest Magisk Manager dropped support for Magisk 17 or older, you need the matching Manager..
akxak said:
The latest Magisk Manager dropped support for Magisk 17 or older, you need the matching Manager..
Click to expand...
Click to collapse
Thank you so much for your fast reply!
In the exact same situation as OP P20 Pro (maybe except im on LOS 16)
Magisk seems to be working fine passing safteynet and Root Beet finding nothing but yet the Starling Bank app and the Arriva Ticket app both figure out my phone is rooted after a while and lock out.
Had exact problem with Starling app with magisk hide and app on hide list. Turned out to be a direct build.prop modification so after resetprop -p all good now.
gkornaks said:
Had exact problem with Starling app with magisk hide and app on hide list. Turned out to be a direct build.prop modification so after resetprop -p all good now.
Click to expand...
Click to collapse
Can you expand on this a bit?
I've downloaded Magiskhide props config, and what do I have to do now?
For me, starling always works for couple of days and then it locks me out via the root screen.
republicj said:
Can you expand on this a bit?
I've downloaded Magiskhide props config, and what do I have to do now?
For me, starling always works for couple of days and then it locks me out via the root screen.
Click to expand...
Click to collapse
I modified a build.prop directly before magisk install so compromised the system partition. I've used resetprop to mask it. Like you I'm occasionally getting root warning as well and have to re-authorise so magisk hide in 18.1 not perfect as mentioned a lot in a forum.
Hi,
it seams that the problem is still there. I have to retoggle Magisk Hide at every reboot of the phone.
Is there any workaround or any ETA on the fix?
Thank you.
No one?
Never ask for ETAs...
https://github.com/topjohnwu/Magisk/issues/1654
Didgeridoohan said:
Never ask for ETAs...
https://github.com/topjohnwu/Magisk/issues/1654
Click to expand...
Click to collapse
Ok, I'm sorry about that , I just needed a confirmation that the problem was still there. Thank you for the reply!
Yes it's till here. I cannot login to Arriva bus app with Magisk 20.1.
Hi All,
CITI bank App is detecting root. No matter what I do, Magiskhide fails to hide CITI bank app. Tried all the basic troubleshooting.
1. Restored the Magisk app and unchecked CITI bank app from the list.(shield icon)
2. Rebooted and added CITI bank to list.
3. Changed magisk manager name(Hide the app)
4. Changed the Twrp folder name.
5. Cleared cache for CITI bank.
If anyone could possibly help, I'll be grateful.
Thanks in advance.
altafharsh60 said:
Hi All,
CITI bank App is detecting root. No matter what I do, Magiskhide fails to hide CITI bank app. Tried all the basic troubleshooting.
1. Restored the Magisk app and unchecked CITI bank app from the list.(shield icon)
2. Rebooted and added CITI bank to list.
3. Changed magisk manager name(Hide the app)
4. Changed the Twrp folder name.
5. Cleared cache for CITI bank.
If anyone could possibly help, I'll be grateful.
Thanks in advance.
Click to expand...
Click to collapse
Were you able to solve this? I am also facing the same issue. Please let me know.
trgowtham said:
Were you able to solve this? I am also facing the same issue. Please let me know.
Click to expand...
Click to collapse
I am using a web version now.
Citi Mobile
m.citibank.co.in
Works exactly same.
I know this is not a solution, but workaround until the app starts to work.
trgowtham said:
Were you able to solve this? I am also facing the same issue. Please let me know.
Click to expand...
Click to collapse
Hey ,
Its working for me again.
1. Installed magisk v 22.0.apk and Magisk 22. Zip.
2. Hiding manager app
3. Installed the latest citi bank app (Version 23.5.2) but didn't open
4. Added app to magisk hide list.
Its started working.
Please uninstall busybox.
altafharsh60 said:
Please uninstall busybox.
Click to expand...
Click to collapse
Awesome.. uninstalling busybox did the trick..
Citi app works perfectly now..
Now need to check if other apps are broken because of busybox..
use airfrozen and then its working
i uninstalled busybox, still no luck.. Citibank still detects root
Any idea on how to solve this?
xn0live said:
use airfrozen and then its working
Click to expand...
Click to collapse
After August app update, Citibank is stuck on blue screen WITHOUT any notification!
Obviously it detects magisk root, and all hiding procedures failed (magisk 23.0 / no busybox installed).
Applying airfrozen (on magisk manager) fix the issue while root stays active.
Ta
huuur said:
After August app update, Citibank is stuck on blue screen WITHOUT any notification!
Obviously it detects magisk root, and all hiding procedures failed (magisk 23.0 / no busybox installed).
Applying airfrozen (on magisk manager) fix the issue while root stays active.
Ta
Click to expand...
Click to collapse
me too. just found this post, installed airfrozen and freezed magisk and now citibank works (busybox doesnt matter for me). however, one of the hsbc app still doesnt work even with busybox renamed and magisk freezed
huuur said:
After August app update, Citibank is stuck on blue screen WITHOUT any notification!
Obviously it detects magisk root, and all hiding procedures failed (magisk 23.0 / no busybox installed).
Applying airfrozen (on magisk manager) fix the issue while root stays active.
Ta
Click to expand...
Click to collapse
you shall find an app that have the function of "App ops"
Then disable citibank from "get installed apps"
take a try I have worked in this way
wks960803 said:
you shall find an app that have the function of "App ops"
Then disable citibank from "get installed apps"
take a try I have worked in this way
Click to expand...
Click to collapse
i can't seem to find Citibank on the Request install package from the App ops app.
xn0live said:
use airfrozen and then its working
Click to expand...
Click to collapse
You just saved my life. Thank you very much!
xn0live said:
use airfrozen and then its working
Click to expand...
Click to collapse
Thanks - but easier said than done
Airfrozen cannot get root - using Poco F2 Pro, Android 11 stock, Magisk 23.0
Any idea how to overcome?
Thanks
Tiemichael said:
Thanks - but easier said than done
Airfrozen cannot get root - using Poco F2 Pro, Android 11 stock, Magisk 23.0
Any idea how to overcome?
Thanks
Click to expand...
Click to collapse
just open your magisk, and enable it from there...
Same issue here on SM-N910G with crDroid custom ROM. I needed to have the "Hide the Magisk app" settting enabled in conjunction with Airfrozen. Just freezing the Magisk app wasn't enough. Note: this isn't the MagiskHide setting I'm referring to; that setting was enabled the whole time.
Steps that worked for me (Magisk 23.0) was:
1. In Magisk, add Citi to the hide list first (of course)
2. In Magisk, don't use "Hide the Magisk app". I.e. the app is listed as Magisk in the app drawer.
3. Then, install Airfrozen and grant root access (I wouldn't get the grant root access prompt unless #2 above was done)
4. Now, in Magisk, enable "Hide the Magisk app" and go through that process to rename to 'settings' or whatever.
5. Now, open up Airfrozen and select "settings" (or whatever name you used in 4). Freeze it.
6. Citi app now launches and loads the login screen
Hope that helps someone
dallivadr said:
Same issue here on SM-N910G with crDroid custom ROM. I needed to have the "Hide the Magisk app" settting enabled in conjunction with Airfrozen. Just freezing the Magisk app wasn't enough. Note: this isn't the MagiskHide setting I'm referring to; that setting was enabled the whole time.
Steps that worked for me (Magisk 23.0) was:
1. In Magisk, add Citi to the hide list first (of course)
2. In Magisk, don't use "Hide the Magisk app". I.e. the app is listed as Magisk in the app drawer.
3. Then, install Airfrozen and grant root access (I wouldn't get the grant root access prompt unless #2 above was done)
4. Now, in Magisk, enable "Hide the Magisk app" and go through that process to rename to 'settings' or whatever.
5. Now, open up Airfrozen and select "settings" (or whatever name you used in 4). Freeze it.
6. Citi app now launches and loads the login screen
Hope that helps someone
Click to expand...
Click to collapse
Thanks! It definitely helped me!
wks960803 said:
you shall find an app that have the function of "App ops"
Then disable citibank from "get installed apps"
take a try I have worked in this way
Click to expand...
Click to collapse
i didn't see any permission nameas "get installed apps" in app ops.
dallivadr said:
Same issue here on SM-N910G with crDroid custom ROM. I needed to have the "Hide the Magisk app" settting enabled in conjunction with Airfrozen. Just freezing the Magisk app wasn't enough. Note: this isn't the MagiskHide setting I'm referring to; that setting was enabled the whole time.
Steps that worked for me (Magisk 23.0) was:
1. In Magisk, add Citi to the hide list first (of course)
2. In Magisk, don't use "Hide the Magisk app". I.e. the app is listed as Magisk in the app drawer.
3. Then, install Airfrozen and grant root access (I wouldn't get the grant root access prompt unless #2 above was done)
4. Now, in Magisk, enable "Hide the Magisk app" and go through that process to rename to 'settings' or whatever.
5. Now, open up Airfrozen and select "settings" (or whatever name you used in 4). Freeze it.
6. Citi app now launches and loads the login screen
Hope that helps someone
Click to expand...
Click to collapse
hmm...not working for me. using MIUI here , i already disallow citibank to read my app list, and perform steps above. still detect my phone as rooted.
locolyric said:
hmm...not working for me. using MIUI here , i already disallow citibank to read my app list, and perform steps above. still detect my phone as rooted.
Click to expand...
Click to collapse
Try downgrading magisk to v22 and uninstalling busybox. I'm using it.
See images.
Hi
I have a problem in the clubhouse app that login not complete on any rooted device ... no problem on Non Root devices
I hide magisk app add clubhouse to magisk hide and EDExposed blacklist but still not working.
also, the same issue is in Mcdonald's app.
any idea how to solve these issues
Note: My Bank app works after adding it to magisk hide and hide magisk app, which means i did it right.
thanks
anyone help me please
Have you tried removing the Magisk app? That's a popular way of detecting Magisk, even with a repackaged app. It's practically impossible to completely hide it on anything below Android 11, and even then it's necessary for the app to target A11 for full hiding to work (which won't happen until Google enforces that, maybe later this year).
Of course, Xposed/EdXposed/LSPosed tools can probably be used to hide the app fully...
Didgeridoohan said:
Have you tried removing the Magisk app? That's a popular way of detecting Magisk, even with a repackaged app. It's practically impossible to completely hide it on anything below Android 11, and even then it's necessary for the app to target A11 for full hiding to work (which won't happen until Google enforces that, maybe later this year).
Of course, Xposed/EdXposed/LSPosed tools can probably be used to hide the app fully...
Click to expand...
Click to collapse
thanks for your reply
if i removed magisk .. everything that use root will stop and i don't want that
also can you please tell me how to hide the app fully using EDXposed
I did not say "remove Magisk"... I said "remove the Magisk app". Just uninstall the app and try and see if Clubhouse still triggers. If it works we know it's looking for the app and you'll have to either freeze/uninstall the Magisk app when using Clubhouse and then reinstall it again afterwards, or use one of the available isolation methods. I've got a few of those mentioned here, but I'm sure you can find more if you search (it's been covered a lot):
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Isolation_apps
zamlkawy said:
Hi
I have a problem in the clubhouse app that login not complete on any rooted device ... no problem on Non Root devices
I hide magisk app add clubhouse to magisk hide and EDExposed blacklist but still not working.
also, the same issue is in Mcdonald's app.
any idea how to solve these issues
Note: My Bank app works after adding it to magisk hide and hide magisk app, which means i did it right.
thanks
Click to expand...
Click to collapse
for Mcdonald's try this
[MOD][XPOSED][4.1+] McRoot (McDonalds Global App)
McRoot McDonalds Global App security fix Remove checks of: root unacceptable apps unacceptable device properties (developer options etc) Note: The app requests SafetyNet pass! Use Magisk+Riru+Riru-Unshare etc Install notes: install apk...
forum.xda-developers.com
Hi. I also have Magisk installed on my device. I uninstalled Magisk app, tried logging into clubhouse again, but still the issue persists.
After receiving the missed call while trying to sign in, I get the notification, 'There was an error please try again'
Clearing the clubhouse app data, uninstalling and reinstalling the app again hasn't helped at all. I get the same issue.
I have Magisk 23.0 installed on my Oneplus5T running Android 10.
For context I have "treble_arm64_bvS-userdebug 11 RQ3A.211001.001 eng.crossg.20211108.032335 test-keys" LineageOS custom rom with magisk and safetynet granted (thanks to riru module)
But my banking app got recently updated https://play.google.com/store/apps/details?id=com.cm_prod.bad and now refuses to let me connect because "For security reasons this application does'nt support emulators anymore"
This app has MagiskHide applied otherwise it detects root and refuses to let me connect
I know MagiskHide is discontinued but is there a Magisk module or a tweak that could resolve my issue ?
Thanks in advance for any help
Try install IsLand and add app that detect Magisk into IsLand, also hide magisk app by repacking magisk with random package
Dawnowl444 said:
For context I have "treble_arm64_bvS-userdebug 11 RQ3A.211001.001 eng.crossg.20211108.032335 test-keys" LineageOS custom rom with magisk and safetynet granted (thanks to riru module)
But my banking app got recently updated https://play.google.com/store/apps/details?id=com.cm_prod.bad and now refuses to let me connect because "For security reasons this application does'nt support emulators anymore"
This app has MagiskHide applied otherwise it detects root and refuses to let me connect
I know MagiskHide is discontinued but is there a Magisk module or a tweak that could resolve my issue ?
Thanks in advance for any help
Click to expand...
Click to collapse
https://github.com/kdrag0n/safetynet-fix make sure you use the one for magisk hide not zygisk.
Also make sure that magisk manager is hidden ex in magisk manager settings hide magisk rename. Also make sure gms(play services), play store, and your banking app is hidden
toolhas4degrees said:
https://github.com/kdrag0n/safetynet-fix make sure you use the one for magisk hide not zygisk.
Also make sure that magisk manager is hidden ex in magisk manager settings hide magisk rename. Also make sure gms(play services), play store, and your banking app is hidden
Click to expand...
Click to collapse
There are more and more app now can detect magisk stub apk (random package). Your tutorial is old and already have a post about how to do this ))
Well thanks for your responses and yes I have already have already rename Magisk with random id, I have universal safety net fix with riru, and MagiskHide enabled with my banking app (otherwise it detects root as is). And tough that all of this was enough (I do pass safetynet for now) but seems that it is not for my banking app...
@huskydg.11455139 I installed IsLand but I was a bit too much surprised with all the professional profil tweaking that it was doing without my consent... I kinda panic and uninstall the all thing...
But :
- I don't get in what way this will hide the fact that my banking app detect Magisk as an emulator
- When an app is "professionalised" what does it do and what does happen to my saves ?
- I do need MagiskHide to hide root otherwise my banking app detects it either way, can I do that while having IsLand enabled ?
Dawnowl444 said:
Well thanks for your responses and yes I have already have already rename Magisk with random id, I have universal safety net fix with riru, and MagiskHide enabled with my banking app (otherwise it detects root as is). And tough that all of this was enough (I do pass safetynet for now) but seems that it is not for my banking app...
@huskydg.11455139 I installed IsLand but I was a bit too much surprised with all the professional profil tweaking that it was doing without my consent... I kinda panic and uninstall the all thing...
But :
- I don't get in what way this will hide the fact that my banking app detect Magisk as an emulator
- When an app is "professionalised" what does it do and what does happen to my saves ?
- I do need MagiskHide to hide root otherwise my banking app detects it either way, can I do that while having IsLand enabled ?
Click to expand...
Click to collapse
IsLand is second space, any app in IsLand cannot collect anything in Primary space, prevent it collects app list and scan these apk to detect random package magisk app
You can apply MagiskHide / MagiskDenyList for any app in IsLand
I used this to bypass Techcombank, PUBG NEW STATE which can even detect random package magisk app (stub.apk) without freezing Magisk app
Or Hide your list app by using Xposed module: Hide My List App, because now more and more app can detect magisk even it has random package.
With combo (MagiskHide)+(Random Package Magisk app)
huskydg said:
IsLand is second space, any app in IsLand cannot collect anything in Primary space, prevent it collects app list and scan these apk to detect random package magisk app
You can apply MagiskHide / MagiskDenyList for any app in IsLand
I used this to bypass Techcombank, PUBG NEW STATE which can even detect random package magisk app (stub.apk) without freezing Magisk app
Or Hide your list app by using Xposed module: Hide My List App, because now more and more app can detect magisk even it has random package.
With combo (MagiskHide)+(Random Package Magisk app)
Click to expand...
Click to collapse
Well I did just now tried IsLand and my banking app still detects that my phone is considered as an emulator.
But the thing is MagiskHide and random package repacking do work as long as hiding root is concerned, otherwise by banking app do warn me that it detects root. But I wonder if in that process MagiskHide use some technics that are ones of an emulator in the process and my banking app do detects that...
Dawnowl444 said:
Well I did just now tried IsLand and my banking app still detects that my phone is considered as an emulator.
But the thing is MagiskHide and random package repacking do work as long as hiding root is concerned, otherwise by banking app do warn me that it detects root. But I wonder if in that process MagiskHide use some technics that are ones of an emulator in the process and my banking app do detects that...
Click to expand...
Click to collapse
Are you using Custom ROM?
huskydg said:
Are you using Custom ROM?
Click to expand...
Click to collapse
Well yes I'm using AndyYan's Lineage OS (Android 11) rom thanks to phh experimentation from the Treble Project.
This could could be a thing but I'ts weird that my banking app is warning me about emulator and not custom rom (instead of WhatsApp that clearly says that it detects custom rom).
I'm just speculating at this point but I have my bootloader unlock and the phh/AndyYan rom is userdebug. I think the unlock bootloader is spoofed by safetynet fix but I don't know if the userdebug variant can be detect and can be sign of an emulator...
Dawnowl444 said:
Well yes I'm using AndyYan's Lineage OS (Android 11) rom thanks to phh experimentation from the Treble Project.
This could could be a thing but I'ts weird that my banking app is warning me about emulator and not custom rom (instead of WhatsApp that clearly says that it detects custom rom).
I'm just speculating at this point but I have my bootloader unlock and the phh/AndyYan rom is userdebug. I think the unlock bootloader is spoofed by safetynet fix but I don't know if the userdebug variant can be detect and can be sign of an emulator...
Click to expand...
Click to collapse
So that's why, most Custom ROM has broken rules, do you know? Also app can easily detect if you are running Custom ROM
huskydg said:
So that's why, most Custom ROM has broken rules, do you know? Also app can easily detect if you are running Custom ROM
Click to expand...
Click to collapse
Welp same here but it just bug me that my app detects "emulator" and not custom rom... But it's could be some nonsens from by banking app after all...
And weird think that I need to disable MagiskHide, that is still usefull to me, for Momo checking.
So then I should try to spoof my build id and other stuff that can say that I have custom rom?
Dawnowl444 said:
Welp same here but it just bug me that my app detects "emulator" and not custom rom... But it's could be some nonsens from by banking app after all...
And weird think that I need to disable MagiskHide, that is still usefull to me, for Momo checking.
So then I should try to spoof my build id and other stuff that can say that I have custom rom?
Click to expand...
Click to collapse
Maybe they can mark custom ROM as emulator just to make you fear (sometime they said they found something but not that thing). who know?
Try restore to stock rom (no root) and check
huskydg said:
Maybe they can mark custom ROM as emulator just to make you fear (sometime they said they found something but not that thing). who know?
Try restore to stock rom (no root) and check
Click to expand...
Click to collapse
Yeah sometimes they say stuff because they found root or "insecurity" but the app says something completely different.
I will loose all my data if I restore stock rom plus it's a Chinese bloated rom, so I won't do that. I do really like Lineage OS so I will stay out there. But yeah it will most definitively work with stock rom not rooted that's obvious (well I say that but I still have TWRP and unlock bootloader)
huskydg said:
There are more and more app now can detect magisk stub apk (random package). Your tutorial is old and already have a post about how to do this ))
Click to expand...
Click to collapse
If you are using xposed, you can use dev opts hide and hide my applist modules to hide anything you want. I was going with the simplest answer to see if all the first checks were in place.
toolhas4degrees said:
If you are using xposed, you can use dev opts hide and hide my applist modules to hide anything you want. I was going with the simplest answer to see if all the first checks were in place.
And wasn't tutorial was a question
Click to expand...
Click to collapse
Not all apps you can apply the same way
huskydg said:
Not all apps you can apply the same way
Click to expand...
Click to collapse
Actually you can if they are more invasive you will need more hiding than magisk hide can give you. Which are the lsposed method example of what I said also lua module can do some of it also depends which module you prefer. I use hide my applist and dev opts
Go search lsposed and how to use hide my applist
toolhas4degrees said:
Actually you can if they are more invasive you will need more hiding than magisk hide can give you. Which are the lsposed method example of what I said also lua module can do some of it also depends which module you prefer. I use hide my applist and dev opts
Go search lsposed and how to use hide my applist
Click to expand...
Click to collapse
You think I don't know this , don't you?
If you do you wouldn't be here asking.
Maybe you should try using them correctly and clearing data and cache of the app.
toolhas4degrees said:
If you do you wouldn't be here asking.
Maybe you should try using them correctly and clearing data and cache of the app.
Click to expand...
Click to collapse
What's the question I am asking?
toolhas4degrees said:
If you do you wouldn't be here asking.
Maybe you should try using them correctly and clearing data and cache of the app.
Click to expand...
Click to collapse
Maybe you misunderstand what i am taking?