Related
Hi, as you know Camera Controller app which lets you manage Camera app through Galaxy Watch/Active 2/Active is only available on Samsung Galaxy S10 series/ Note 10 series and now recently supported S20 series in update.
You cant install camera controller app in your Note 9 or older devices due to samsung restrictions.
Instructions:
1. You need Xposed on your Note 9 , i have Note 9 exynos international version with android 10 OS, i am using edxposed sandhook.
2. Install the app Device ID Masker Lite from https://repo.xposed.info/module/zone.bytesreverser.xposeddeviceidmaskerlite and enable module and reboot.
3. Now goto Model field and write "SM-N975F" ( we are spoofing to Note 10+) and click apply and now reboot the device. ( if you using device id masker pro/unlocker you can click Select Apps option and click Select all and save) REBOOT.
4. Now in Galaxy store you should see the Camera app update available, update it should be atleast v10.0.02.9 http://apps.samsung.com/appquery/appDetail.as?appId=com.sec.android.app.camera this link will show app unavailable if you login in note 9 or s9 model no. Means without spoof.
NOTE : just in case i have attached the Camera v10.0.02.9 also , remember it is zipped and needs to be unzipped to get apk file.
5. Now after update goto this link http://apps.samsung.com/gear/appDetail.as?appId=com.samsung.cameracontroller and install camera controller in your watch/active 2/active, which was not available to your device before.
6. Once done, you can switch back to your old real model of your device, goto device id masker and click apply in MODEL field when it is empty and done. REBOOT.
Can this be achieved without root?
Can someone just get the APK file so we can manually install it
This worked for me on latest build of havoc os, might work for other Roms too.
Step 1 :
Open Magisk manager, download and install both
MagiskHide Props Config (link) and Busybox for android NDK modules from downloads, after installing reboot your phone.
Step 2:
Install terminal emulator from playstore(link)
Step 3:
open terminal emulator
enter command :
Code:
su
Grant superuser access when prompted
Step 4:
type in command:
Code:
props
Step 6 :
and follow the on screen options
select option 1 - edit device fingerprint
by typing : 1
then type in f to Pick a certified fingerprint
from the list pick your mobile manufacturer
select your mobile model
select the latest available android version
finally reboot your phone by typing in
Code:
reboot
this should fix the ctsProfile issue,
to use banking or wallet apps, hide magisk by using magisk hide option and select the app you want to hide root access from
thanks to this awesome dev Didgeridoohan for making this possible
https://forum.xda-developers.com/member.php?u=4667597
for people who want a video to look at the process here is the video
credits :
Thread link for magisk hide props config module: https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
DEV for magisk hide props config module : Didgeridoohan
you can donate him at : https://www.paypal.me/didgeridoohan
does it affect the fingerprint?
is it safe?
this process works to solve cts Profile check, but banking apps still doesn't work
Doesn't work for me.
I used:
Google Pixel XL (Android 10)
Magisk 20.4
Magisk Manager 7.5.1
Edit: Enable "Magisk Hide" in the Settings -> reboot -> now it works.
Doesn't work for me either.
Pixel 4
It didn't give me an option to select an Android version.
I managed to make banking apps to work by disabling usb debugging.
Enviado desde mi F8331 mediante Tapatalk
I did exactly as it described above but still ctsprofile: false. Google pay sees root on my Poco F2 Pro.
Unfortunately does not work for Google Pixel 4 XL (Android 10)
For everyone that's struggling with trying to pass CTS:
https://www.didgeridoohan.com/magisk/MagiskHide#hn_Unlocked_bootloader_3
Google seemed to do something, i.e. Google Pay has been working for a long time. But when I was sleeping, Google sneaked in to my bedroom and made so that ctsProfile returned false in Magisk when I wake up.
A new unknown and uninvented method needs to be done? A Magisk update?
Vantskruv said:
Google seemed to do something, i.e. Google Pay has been working for a long time. But when I was sleeping, Google sneaked in to my bedroom and made so that ctsProfile returned false in Magisk when I wake up.
A new unknown and uninvented method needs to be done? A Magisk update?
Click to expand...
Click to collapse
Ha!
I concur!
did the whole process with my Mi A3 with Android 10 and my device is stuck on Mi logo. how to fix?
Interesting. Woke up jul 8th as well with as notification that Google pay cannot be used any more. Seems like they flipped a switch.... I tried unroofing until I realized I had to do a factory reset to relock the bootloader. So back on root without Google pay. I hope for a quick solution though
Heh...
I have tried this method. It was suprising that Mi 10 is not on the props list...
The best thing in my phone is that the CTS is false (for - as I can remember - three weeks) but GP payements work.
Banking apps not working even though hided in the magisk. Any fix for it?
Not working with Magisk 20.4
Try disabling usb debugging and/or magisk hidding
Enviado desde mi F8331 mediante Tapatalk
vamsi209 said:
This worked for me on latest build of havoc os, might work for other Roms too.
Step 1 :
Open Magisk manager, download and install both
MagiskHide Props Config (link) and Busybox for android NDK modules from downloads, after installing reboot your phone.
Step 2:
Install terminal emulator from playstore(link)
Step 3:
open terminal emulator
enter command :
Code:
su
Grant superuser access when prompted
Step 4:
type in command:
Code:
props
Step 6 :
and follow the on screen options
select option 1 - edit device fingerprint
by typing : 1
then type in f to Pick a certified fingerprint
from the list pick your mobile manufacturer
select your mobile model
select the latest available android version
finally reboot your phone by typing in
Code:
reboot
this should fix the ctsProfile issue,
to use banking or wallet apps, hide magisk by using magisk hide option and select the app you want to hide root access from
thanks to this awesome dev Didgeridoohan for making this possible
https://forum.xda-developers.com/member.php?u=4667597
for people who want a video to look at the process here is the video
credits :
Thread link for magisk hide props config module: https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
DEV for magisk hide props config module : Didgeridoohan
you can donate him at : https://www.paypal.me/didgeridoohan
Click to expand...
Click to collapse
Hi!
At the end of the tutorial my phone was not there (redmi note 8 pro) so what i need to do if my phone is not to the list????
roberto_1986 said:
Hi!
At the end of the tutorial my phone was not there (redmi note 8 pro) so what i need to do if my phone is not to the list????
Click to expand...
Click to collapse
Pick whatever device on the list that's closest, or help with finding a working, certified print for your device.
Didgeridoohan said:
Pick whatever device on the list that's closest, or help with finding a working, certified print for your device.
Click to expand...
Click to collapse
its safe??? because it change my phone fingerprint....
---------- Post added at 02:04 AM ---------- Previous post was at 01:09 AM ----------
roberto_1986 said:
its safe??? because it change my phone fingerprint....
Click to expand...
Click to collapse
also for get fingerprint u need to have both CTS profile and basic integrity set to true (not in my case because CTS is set to false)
so someone can get his finger pring from a redmi note 8 pro???
This is how to fix safetynet and device not certified (May not work on 11, but will on 10). Tested on magisk 20.4 stable.
1. Install magisk, i get basic integrity and cts both false.
2. Turn on magisk hide, and check several times, basic integrity will be true and cts still false. Device still not certified. Basic integrity must true in this step to go to next step.
In this step, you must make sure that basic integrity is true, or you will get basic and cts will true at the end but your device wont certified. For make sure, in step 2, i hide the magisk manager also.
3. Install busybox and magisk hide prop config, reboot.
4. Open terminal, type :
- su
- props
- 1
- f
- and choose fp model what you want (use android 10 model for 10 and sunfish 11 preferably for 11), reboot.
5. Check, cts should be true.
6. Clear data for playstore.
7. Check playstore several times, and you will see your device should be certified.
If this tutorial was helpful for you, feel free to leave a thanks to show your appreciation.
Don't work on stock rom. I have xposed installed. Before 10.2 it was working.
micgeb said:
Don't work on stock rom. I have xposed installed. Before 10.2 it was working.
Click to expand...
Click to collapse
I'm not on OOS right now, otherwise I'd be able to help you better. Maybe it's Xposed that's causing you to not be able to pass? Try uninstalling it and see if it passes for you after
micgeb said:
Don't work on stock rom. I have xposed installed. Before 10.2 it was working.
Click to expand...
Click to collapse
Misuto said:
I'm not on OOS right now, otherwise I'd be able to help you better. Maybe it's Xposed that's causing you to not be able to pass? Try uninstalling it and see if it passes for you after
Click to expand...
Click to collapse
I also cover this in my Guide about Installing Lineage, Step 5. I found the Android 10 fingerprint does not pass safety net reliably so I always use the Android 9 fingerprint (even on Android 10 ROMs).
Don't get hung up on device type or Android version. I have tablets that run Android 9 and 10, that use a Android 7 fingerprint. If your device isn't available choose another one.
OhioYJ said:
I also cover this in my Guide about Installing Lineage, Step 5. I found the Android 10 fingerprint does not pass safety net reliably so I always use the Android 9 fingerprint (even on Android 10 ROMs).
Don't get hung up on device type or Android version. I have tablets that run Android 9 and 10, that use a Android 7 fingerprint. If your device isn't available choose another one.
Click to expand...
Click to collapse
I used the key already for Android 9/10. It is only one key in the list.
micgeb said:
I used the key already for Android 9/10. It is only one key in the list.
Click to expand...
Click to collapse
On the 7 one, I meant for another device (Since I was talking tablets at that point) I should have made that clearer. My overall point was that the make / model of the fingerprint does not necessarily matter, just as long as it passes safety net for you.
Great guide and extremely easy to follow. Thanks OP. My 6T is on 10.3.4 and it was from T mobile and converted to international. Now it passed ctsprofile.
So does that mean I could use google pay now? I haven't checked yet. But I still cannot install netflix and disney+ from play store.
xman099 said:
Great guide and extremely easy to follow. Thanks OP. My 6T is on 10.3.4 and it was from T mobile and converted to international. Now it passed ctsprofile.
So does that mean I could use google pay now? I haven't checked yet. But I still cannot install netflix and disney+ from play store.
Click to expand...
Click to collapse
Just give it a little time. Also you may want to delete play store app's storage and reboot. As long as you pass ctsprofile, those apps will be available.
phaino00 said:
Just give it a little time. Also you may want to delete play store app's storage and reboot. As long as you pass ctsprofile, those apps will be available.
Click to expand...
Click to collapse
Thanks. After storage cleaned, now it is certified.
Misuto said:
I originally posted this in another thread to help some people out, and I decided to make a new thread here to help more people, so here is the guide.
Download MagiskHide Props Module from Magisk, install it and reboot your phone. After you do that, go to the play store and download an app call Termux, open it and type su and hit enter, and after that type props and hit enter, a menu will load up in a few seconds, type 1 and hit enter, after that type f and hit enter then type 20 for the OnePlus fingerprint, hit enter, after typing 20 type 9 next for the 6T fingerprint, type 2 for Android 10 and type y for yes and hit enter, wait for it to complete and type y one last time to reboot your phone. That should fix it for you.
P.S. Also don't forget to enable Magisk Hide toggle in the Magisk app settings, in recent builds it's no longer enabled by default.
Click to expand...
Click to collapse
Thanks for the great guide, TMobile converted to international on 10.3.4 now showing certified.
I'm seeing around that people are still wondering how to fix safetynet on their devices, so I've updated the guide with better wording to help people out.
I'm currently using v10.3.6 OOS on my converted OnePlus 6t and this worked perfect. Not that it matters as I'm quite sure this will work long as Android 10 is selected in props and you're on Android 10 but I chose Pixel 3XL Android 10 for my fingerprint change in props. I'm using latest magisk canary. Appreciate this @Misuto !
flash713 said:
I'm currently using v10.3.6 OOS on my converted OnePlus 6t and this worked perfect. Not that it matters as I'm quite sure this will work long as Android 10 is selected in props and you're on Android 10 but I chose Pixel 3XL Android 10 for my fingerprint change in props. I'm using latest magisk canary. Appreciate this @Misuto !
Click to expand...
Click to collapse
You're welcome. Glad I could help.
working for me almost perfect. except one banking app works fine.
Misuto said:
This is how to fix safetynet and device not certified (May not work on 11, but will on 10). Tested on magisk 20.4 stable.
1. Install magisk, i get basic integrity and cts both false.
2. Turn on magisk hide, and check several times, basic integrity will be true and cts still false. Device still not certified. Basic integrity must true in this step to go to next step.
In this step, you must make sure that basic integrity is true, or you will get basic and cts will true at the end but your device wont certified. For make sure, in step 2, i hide the magisk manager also.
3. Install busybox and magisk hide prop config, reboot.
4. Open terminal, type :
- su
- props
- 1
- f
- and choose fp model what you want (use android 10 model for 10 and sunfish 11 preferably for 11), reboot.
5. Check, cts should be true.
6. Clear data for playstore.
7. Check playstore several times, and you will see your device should be certified.
If this tutorial was helpful for you, feel free to leave a thanks to show your appreciation.
Click to expand...
Click to collapse
Worked on Oneplus Nord.
Thank you.
Misuto said:
This is how to fix safetynet and device not certified (May not work on 11, but will on 10). Tested on magisk 20.4 stable.
1. Install magisk, i get basic integrity and cts both false.
2. Turn on magisk hide, and check several times, basic integrity will be true and cts still false. Device still not certified. Basic integrity must true in this step to go to next step.
In this step, you must make sure that basic integrity is true, or you will get basic and cts will true at the end but your device wont certified. For make sure, in step 2, i hide the magisk manager also.
3. Install busybox and magisk hide prop config, reboot.
4. Open terminal, type :
- su
- props
- 1
- f
- and choose fp model what you want (use android 10 model for 10 and sunfish 11 preferably for 11), reboot.
5. Check, cts should be true.
6. Clear data for playstore.
7. Check playstore several times, and you will see your device should be certified.
If this tutorial was helpful for you, feel free to leave a thanks to show your appreciation.
Click to expand...
Click to collapse
Tested and passed on Oneplus 8 Pro IN2025, Latest LineageOS 18.1. OP be praised.
Edit: I have to have the universal SafetyNet Fix installed in the meantime to achieve the success. Otherwise it doesn't work. Now it also worked on my old pixel 2 XL following this way.
It doesn't show that I passed safety net and the rest. But my bank apps and netflix now working flawlessly.
Misuto said:
This is how to fix safetynet and device not certified (May not work on 11, but will on 10). Tested on magisk 20.4 stable.
1. Install magisk, i get basic integrity and cts both false.
2. Turn on magisk hide, and check several times, basic integrity will be true and cts still false. Device still not certified. Basic integrity must true in this step to go to next step.
In this step, you must make sure that basic integrity is true, or you will get basic and cts will true at the end but your device wont certified. For make sure, in step 2, i hide the magisk manager also.
3. Install busybox and magisk hide prop config, reboot.
4. Open terminal, type :
- su
- props
- 1
- f
- and choose fp model what you want (use android 10 model for 10 and sunfish 11 preferably for 11), reboot.
5. Check, cts should be true.
6. Clear data for playstore.
7. Check playstore several times, and you will see your device should be certified.
If this tutorial was helpful for you, feel free to leave a thanks to show your appreciation.
Click to expand...
Click to collapse
This seems like a very easy-to-follow guide. Before I actually execute it, I was wondering if this would work on my unrooted OP6T running Lineage OS 18.1 (official) with lineage os recovery. Doing this just so that I can use Amazon pay, Paytm and other banking apps. Any idea?
Misuto said:
This is how to fix safetynet and device not certified (May not work on 11, but will on 10). Tested on magisk 20.4 stable.
1. Install magisk, i get basic integrity and cts both false.
2. Turn on magisk hide, and check several times, basic integrity will be true and cts still false. Device still not certified. Basic integrity must true in this step to go to next step.
In this step, you must make sure that basic integrity is true, or you will get basic and cts will true at the end but your device wont certified. For make sure, in step 2, i hide the magisk manager also.
3. Install busybox and magisk hide prop config, reboot.
4. Open terminal, type :
- su
- props
- 1
- f
- and choose fp model what you want (use android 10 model for 10 and sunfish 11 preferably for 11), reboot.
5. Check, cts should be true.
6. Clear data for playstore.
7. Check playstore several times, and you will see your device should be certified.
If this tutorial was helpful for you, feel free to leave a thanks to show your appreciation.
Click to expand...
Click to collapse
Thanks man. It worked perfectly on Lineage OS 17.1
Misuto said:
This is how to fix safetynet and device not certified (May not work on 11, but will on 10). Tested on magisk 20.4 stable.
1. Install magisk, i get basic integrity and cts both false.
2. Turn on magisk hide, and check several times, basic integrity will be true and cts still false. Device still not certified. Basic integrity must true in this step to go to next step.
In this step, you must make sure that basic integrity is true, or you will get basic and cts will true at the end but your device wont certified. For make sure, in step 2, i hide the magisk manager also.
3. Install busybox and magisk hide prop config, reboot.
4. Open terminal, type :
- su
- props
- 1
- f
- and choose fp model what you want (use android 10 model for 10 and sunfish 11 preferably for 11), reboot.
5. Check, cts should be true.
6. Clear data for playstore.
7. Check playstore several times, and you will see your device should be certified.
If this tutorial was helpful for you, feel free to leave a thanks to show your appreciation.
Click to expand...
Click to collapse
This worked for me. Thanks
not sure if there was a recent update somewhere, but somehow I lost the ability to use face unlock when using LastPass and the Wells Fargo app. anyone else or have any suggestions? I've updated to the August Pixel update, but this was happening prior to this specific update and only recently. in the past it was working fine. I've already tried clearing the face data and re-recognizing, but no change. help!
I've got the same with June update. Factory reset helps me with LastPass face unlock
LaatPass user here and face unlock is working fine for me. Running Android 11 beta 3.
Sent from my Pixel 4 XL using Tapatalk
Did you install a magisk module to pass safteynet? It's that, not the June update, lol. It tricks your phone into thinking it's not a pixel 4
enndub said:
Did you install a magisk module to pass safteynet? It's that, not the June update, lol. It tricks your phone into thinking it's not a pixel 4
Click to expand...
Click to collapse
****, that was it... damned if I do, damned if I don't!
It works fine for me.
So does Simple Bank
enndub said:
Did you install a magisk module to pass safteynet? It's that, not the June update, lol. It tricks your phone into thinking it's not a pixel 4
Click to expand...
Click to collapse
Can you point me in the direction of that magisk module?
You mean the magiskhidepropsconfig? I tried it but it still didn't pass safety net
dimm0k said:
****, that was it... damned if I do, damned if I don't!
Click to expand...
Click to collapse
Did you use magisk hide prop config to change your phone fingerprint?
bsg411 said:
Did you use magisk hide prop config to change your phone fingerprint?
Click to expand...
Click to collapse
I added the MagiskHide Props Config module along with the HARDWARE OFF module just so I could pass SafetyNet... unfortunately as a result of the latter module, biometric unlock gets hosed as a result. I disabled that module, but left the former one enabled and things are back to normal with biometric unlock
dimm0k said:
I added the MagiskHide Props Config module along with the HARDWARE OFF module just so I could pass SafetyNet... unfortunately as a result of the latter module, biometric unlock gets hosed as a result. I disabled that module, but left the former one enabled and things are back to normal with biometric unlock
Click to expand...
Click to collapse
I did the magisk hide props config module and masked the pixel 4xl fingerprint but that alone didnt pass safetynet....not familiar with hardware off
bsg411 said:
I did the magisk hide props config module and masked the pixel 4xl fingerprint but that alone didnt pass safetynet....not familiar with hardware off
Click to expand...
Click to collapse
how did you mask the pixel 4xl fingerprint?
dimm0k said:
how did you mask the pixel 4xl fingerprint?
Click to expand...
Click to collapse
I thought thats what you did get the CTS profile to pass under the safetynet check??
The procedure I followed is below...but it didnt work for me:
1) First, go to the Google Play Store & download “Termux” which is an Android terminal emulator and Linux environment app.
2) Next, open Magisk Manager & swipe from the left side. From there, select the “Downloads” option.
3) There, you need to Install two Magisk Modules – Busybox for Android NDK & MagiskHide Props Config
4) You can either Install one Module & then reboot and then Install the other, or Install One, go back, install the second, and then reboot. Both will work.
5) Once the phone reboots, now we need to do one final thing which is the most important step. Before moving to the next step, just check if both the modules are shown as installed or not in Magisk Manager.
6) Open the Termux app & then type “su” and press Enter. This will grant Superuser Rights to the app.
7) Next, type “props” & press Enter. You will see a lot of options & numbers in front of them to choose from.
8) You need to choose the option that says “Edit Device Fingerprint”. It should be the Number “1” but just double check it on your device.
Enter that Number & press Enter.
9) Again, you’ll see some options & from there, choose the one that says “Pick a certified fingerprint”. This time, instead of numbers, you will see letters in front of each option like “f”, “v”, “s”, “b” etc. Enter the letter in front of the option (Pick a Certified Fingerprint) & press Enter.
10) Now, you’ll see a long list of various Smartphone companies so from here, you need to choose your phone’s company. For Example, if your phone is the Asus Zenfone Max Pro M1, choose “Asus”. Here also, you need to type the number in front of the company name & then press Enter.
11) Now, it’ll show you various devices from that company. If your device is there in the list, you’re good to go. Otherwise, you’re not lucky so you will have to wait for some other method.
12) Select the number in front of your Phone’s name & then press Enter.
13) Finally, it will ask if you want to continue. If you have followed everything above & selected the right options, write “y” & press Enter.
Finally, press “y” to reboot your device & press Enter. Now, your phone will reboot.
bsg411 said:
I thought thats what you did get the CTS profile to pass under the safetynet check??
The procedure I followed is below...but it didnt work for me:
1) First, go to the Google Play Store & download “Termux” which is an Android terminal emulator and Linux environment app.
2) Next, open Magisk Manager & swipe from the left side. From there, select the “Downloads” option.
3) There, you need to Install two Magisk Modules – Busybox for Android NDK & MagiskHide Props Config
4) You can either Install one Module & then reboot and then Install the other, or Install One, go back, install the second, and then reboot. Both will work.
5) Once the phone reboots, now we need to do one final thing which is the most important step. Before moving to the next step, just check if both the modules are shown as installed or not in Magisk Manager.
6) Open the Termux app & then type “su” and press Enter. This will grant Superuser Rights to the app.
7) Next, type “props” & press Enter. You will see a lot of options & numbers in front of them to choose from.
8) You need to choose the option that says “Edit Device Fingerprint”. It should be the Number “1” but just double check it on your device.
Enter that Number & press Enter.
9) Again, you’ll see some options & from there, choose the one that says “Pick a certified fingerprint”. This time, instead of numbers, you will see letters in front of each option like “f”, “v”, “s”, “b” etc. Enter the letter in front of the option (Pick a Certified Fingerprint) & press Enter.
10) Now, you’ll see a long list of various Smartphone companies so from here, you need to choose your phone’s company. For Example, if your phone is the Asus Zenfone Max Pro M1, choose “Asus”. Here also, you need to type the number in front of the company name & then press Enter.
11) Now, it’ll show you various devices from that company. If your device is there in the list, you’re good to go. Otherwise, you’re not lucky so you will have to wait for some other method.
12) Select the number in front of your Phone’s name & then press Enter.
13) Finally, it will ask if you want to continue. If you have followed everything above & selected the right options, write “y” & press Enter.
Finally, press “y” to reboot your device & press Enter. Now, your phone will reboot.
Click to expand...
Click to collapse
whoa, no... I never did any of this. what is the purpose of these steps?
dimm0k said:
whoa, no... I never did any of this. what is the purpose of these steps?
Click to expand...
Click to collapse
let me back up....what steps did you take to get last pass to work with face unlock? also does you Gpay work too?
bsg411 said:
let me back up....what steps did you take to get last pass to work with face unlock? also does you Gpay work too?
Click to expand...
Click to collapse
being rooted, GPay stopped working until I installed the SQLite Fix module, however recently ctsProfile started failing for me, but that did not affect GPay. lastpass was always working for me until I installed the MagiskHide Props Config along with the HARDWARE OFF module.
dimm0k said:
being rooted, GPay stopped working until I installed the SQLite Fix module, however recently ctsProfile started failing for me, but that did not affect GPay. lastpass was always working for me until I installed the MagiskHide Props Config along with the HARDWARE OFF module.
Click to expand...
Click to collapse
Yeah but the props config has many different things to be altered... What configuration did you alter? Or did you just install the module and left it alone?
Also I could not find the hardware off module or what it does.
Hi All,
Im having the Chinese Mi 11 Pro, with the default ROM on to it.
Unlocked, flashed to the Global ROM. BUT its not passing SafetyNet, Logical because the phones bootloader is being unlocked.
No, I don't wanna go using Xiaomi.EU ROM, I just want to use the Global ROM
How to pass SafetyNet on this point? (inc.Root)
Please help me with this..
{Mod edit: Quoted post deleted}
You are unethical person and selfish and should be reported for guiding others with incorrect information.
aygul12345 said:
Hi All,
Im having the Chinese Mi 11 Pro, with the default ROM on to it.
Unlocked, flashed to the Global ROM. BUT its not passing SafetyNet, Logical because the phones bootloader is being unlocked.
No, I don't wanna go using Xiaomi.EU ROM, I just want to use the Global ROM
How to pass SafetyNet on this point? (inc.Root)
Please help me with this..
Click to expand...
Click to collapse
Don't lock the bootloader ever if not stock rom installed, I assume you know already, but worth to mention because others might not know.
I can't help with an answer regarding your question, sorry. Others will be able to help.
{Mod edit: Quoted post deleted}
No, I cant lock the boatloader because that's coussing Bootloop, because its not the default ROM (Chinese).
Hi,
what you need to do to pass Safety Net (assuming you have installed Magisk 23001, so the one still containing Magisk Hide):
1. Install the modules "Magiskhide Props Config" and "Universal Safety Net Fix" (current is 2.1.1)
2. in Magisk enable Magisk Hide and select Google Play, Play Services and (if used) Googe Pay
3. reboot
4. open a terminal, enter root mode ("su") and then "props", changing to the proposed Mi11 Ultra fingerprint
5. go to "Settings->Apps", find "Google Play Services", clear data & cache on that
6. reboot again (you will see a dialogue asking to confirm your Google account for backups if that is configured)
At least on my phones this procedure worked nicely (also on non Xiaomi, of course selecting another fingerprint ), hopefully also for you - and also despite an unlocked bootloader !!
aygul12345 said:
Hi All,
Im having the Chinese Mi 11 Pro, with the default ROM on to it.
Unlocked, flashed to the Global ROM. BUT its not passing SafetyNet, Logical because the phones bootloader is being unlocked.
No, I don't wanna go using Xiaomi.EU ROM, I just want to use the Global ROM
How to pass SafetyNet on this point? (inc.Root)
Please help me with this..
Click to expand...
Click to collapse
Flash magisk + magic hide module
s3axel said:
Hi,
what you need to do to pass Safety Net (assuming you have installed Magisk 23001, so the one still containing Magisk Hide):
1. Install the modules "Magiskhide Props Config" and "Universal Safety Net Fix" (current is 2.1.1)
2. in Magisk enable Magisk Hide and select Google Play, Play Services and (if used) Googe Pay
3. reboot
4. open a terminal, enter root mode ("su") and then "props", changing to the proposed Mi11 Ultra fingerprint
5. go to "Settings->Apps", find "Google Play Services", clear data & cache on that
6. reboot again (you will see a dialogue asking to confirm your Google account for backups if that is configured)
At least on my phones this procedure worked nicely (also on non Xiaomi, of course selecting another fingerprint ), hopefully also for you - and also despite an unlocked bootloader !!
Click to expand...
Click to collapse
Im gonna try this at this moment, I will flash Magisk with the image. And follow the steps you mentionend. Let you know if its worked yes or no.
s3axel said:
Hi,
what you need to do to pass Safety Net (assuming you have installed Magisk 23001, so the one still containing Magisk Hide):
1. Install the modules "Magiskhide Props Config" and "Universal Safety Net Fix" (current is 2.1.1)
2. in Magisk enable Magisk Hide and select Google Play, Play Services and (if used) Googe Pay
3. reboot
4. open a terminal, enter root mode ("su") and then "props", changing to the proposed Mi11 Ultra fingerprint
5. go to "Settings->Apps", find "Google Play Services", clear data & cache on that
6. reboot again (you will see a dialogue asking to confirm your Google account for backups if that is configured)
At least on my phones this procedure worked nicely (also on non Xiaomi, of course selecting another fingerprint ), hopefully also for you - and also despite an unlocked bootloader !!
Click to expand...
Click to collapse
MagiskHidePropsConf/common/prints.sh at master · Magisk-Modules-Repo/MagiskHidePropsConf
This tool is now dead... Contribute to Magisk-Modules-Repo/MagiskHidePropsConf development by creating an account on GitHub.
github.com
Xiaomi Mi 11 Pro is not listed.
Using Magisk 23011, I can't search modules in this build? How?
aygul12345 said:
MagiskHidePropsConf/common/prints.sh at master · Magisk-Modules-Repo/MagiskHidePropsConf
This tool is now dead... Contribute to Magisk-Modules-Repo/MagiskHidePropsConf development by creating an account on GitHub.
github.com
Xiaomi Mi 11 Pro is not listed.
Using Magisk 23011, I can't search modules in this build? How?
Click to expand...
Click to collapse
I used magisk 23.0 and worked fine
speedtripler said:
I used magisk 23.0 and worked fine
Click to expand...
Click to collapse
But my phone fingersprint is not listed. I only see:
Xiaomi Mi 11 China (11):Xiaomi:M2011K2C=Xiaomi/venus/venus:11/RKQ1.200928.002/V12.0.22.0.RKBCNXM:user/release-keys__2021-01-01Xiaomi Mi 11 Lite Indonesia (11):Xiaomi:M2101K9AG=Xiaomi/courbet_id/courbet:11/RKQ1.200826.002/V12.5.1.0.RKQIDXM:user/release-keys__2021-06-01
Xiaomi Mi 11 Pro is other codename: Star
Xiaomi Mi 11 Pro with SD888 and code name “Star” is launched in Europe
newsbeezer.com
How can I submit or obtain the correct fingerprint?
Indeed, I just checked and saw that there is no longer any Mi11 Ultra fingerprint.
I'd just take the next closes certified fingerprint, in that case Mi 11 China.....
s3axel said:
Hi,
what you need to do to pass Safety Net (assuming you have installed Magisk 23001, so the one still containing Magisk Hide):
1. Install the modules "Magiskhide Props Config" and "Universal Safety Net Fix" (current is 2.1.1)
2. in Magisk enable Magisk Hide and select Google Play, Play Services and (if used) Googe Pay
3. reboot
4. open a terminal, enter root mode ("su") and then "props", changing to the proposed Mi11 Ultra fingerprint
5. go to "Settings->Apps", find "Google Play Services", clear data & cache on that
6. reboot again (you will see a dialogue asking to confirm your Google account for backups if that is configured)
At least on my phones this procedure worked nicely (also on non Xiaomi, of course selecting another fingerprint ), hopefully also for you - and also despite an unlocked bootloader !!
Click to expand...
Click to collapse
Also If I wanna install the Universal Safetynet Fix 2.1.1 its fails because you need to have installed the module " Riru", 26.1.3 version from github. Is that correct?
So Im having in totall 3 modules installed.
- Magisk Hide props config module from Magisk
- Universal Safety net Fix .2.1.1 from Github
- Riru module installed from 26.1.3 from Github
Is that correct?
Just want to be sure.
Ok, thanks for the addition/correction and apologies for my incomplete list - as I always install Riru for Edxposed I wasn't aware it's also needed for the safety net fix ....
I always installed Riru from the Magisk repo, but of course taking it from the official GitHub is also fine....
s3axel said:
Ok, thanks for the addition/correction and apologies for my incomplete list - as I always install Riru for Edxposed I wasn't aware it's also needed for the safety net fix ....
I always installed Riru from the Magisk repo, but of course taking it from the official GitHub is also fine....
Click to expand...
Click to collapse
Thanks for the confirming.
- But what to do when you install a bank app? Do I need select that App in the MagiskHide? Or what process/handeling I need to walkthrough?
- Do you use the setting: " Hide the Magisk App "? When you use this? Is it useful?
Sorry for these newbie question but wanna be sure that I'm doing it right!
aygul12345 said:
Thanks for the confirming.
- But what to do when you install a bank app? Do I need select that App in the MagiskHide? Or what process/handeling I need to walkthrough?
- Do you use the setting: " Hide the Magisk App "? When you use this? Is it useful?
Sorry for these newbie question but wanna be sure that I'm doing it right!
Click to expand...
Click to collapse
Hi again
yes, you most possibly would need to select the banking app within MagiskHide... In addition some apps check for a ".TWRP" folder on the SDCARD, so in case the app still detects a modified system you could try removing this folder (if its there ).....
Also many apps detect Magisk when the Magisk Manager is not "hidden", so yes, using this setting is advisable as well...
Cheers,
Axel
s3axel said:
Hi again
yes, you most possibly would need to select the banking app within MagiskHide... In addition some apps check for a ".TWRP" folder on the SDCARD, so in case the app still detects a modified system you could try removing this folder (if its there ).....
Also many apps detect Magisk when the Magisk Manager is not "hidden", so yes, using this setting is advisable as well...
Cheers,
Axel
Click to expand...
Click to collapse
Ah I dindt know that... I saw a dir of "TWRP" I deleted this.
- Check always in the folder for the dir. "TWRP" and delete this.
- So I need to select some apps such as a banking app to apply in the list of "MagiskHide", next to the following apps that are already listed such as; "Google Play Store(com.android.vending), Google Play-services(com.google.android.gms)" -*Just ticking/enabling the app it enable one of this services (com.xxx)
- Enable "Hide the Magisk app" in the settings, to be sure that is being hidden.
@s3axel Could you give me advise what to do when there is an OTA update, what is the process or handling to walkthrough? Do you still get Root? Or will it broken? If so, Do I need to reinstalla every module again?
Could you give a view what to do when you execute a Firmware upgrade / OTA?
Thanks so far budyy.
@aygul12345 as you are on Stock Global ROM keeping Root should be pretty straight forward (this is from memory as I'm on Xiaomi.EU where the procedure is slightly different, so others are welcome to chime in as well ) : just take the OTA, install it from within the system menu but DONT reboot just yet. After the update got installed and before reboot go to Magisk Manager and select direct installation - that should be everything you need to do.....
s3axel said:
@aygul12345 as you are on Stock Global ROM keeping Root should be pretty straight forward (this is from memory as I'm on Xiaomi.EU where the procedure is slightly different, so others are welcome to chime in as well ) : just take the OTA, install it from within the system menu but DONT reboot just yet. After the update got installed and before reboot go to Magisk Manager and select direct installation - that should be everything you need to do.....
Click to expand...
Click to collapse
Yes, I'm sitting at the Stock - Global ROM instead of the default Chinese ROM (Bootloader - unlocked)
Thanks to you I'm finally passing the CTS - Profile check. By changing the fingerprint to "Xiaomi mi 11"
The strange thing was that I did this before but didn't worked out.. And now finally it worked out by the steps you mentioned. So many thanks!
I flashed also TWRP as recovery, and Download Magisk (23) 23000, changed it to .zip and installed it from TWRP - Also this gives me root access.
Before I did pathing the boot.img of the ROM, but its not needit anymore.
Thats why I don't know what is the logical, practical way to achieve the goal.
So back to point xD, When installing the OTA from STOCK - Menu I need to go to Magisk Manager and select direct installation. After that I can reboot the phone?
Hi, glad this worked out fine for you
Yes, after OTA installation and Magisk installation you can reboot.....
Please clarify which firmware did you use to convert it to Global?
I can't seem to find any official Global for Mi 11 Pro.
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
This link shows the name for both 11 Pro/Ultra, that seems a bit risky to flash.