Related
I've been using ADB the last couple of days to install apps on my Captivate and all of the sudden it stopped working today.
When I type 'adb devices' the phone comes up right away, but it shows offline.
I have tried reinstalling the drivers and Android SDK, but no luck. I've searched around and found some others with this issue, but haven't really found a fix that works for me.
Any idea why ADB would just stop working like that? I even performed a factory reset of the phone and put everything back to defaults.
Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Man, I really thought I was going crazy.
wimbet said:
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Click to expand...
Click to collapse
What the hell is that about!? I wish all these companies would stop trying to break from standards by proprietizing common cables.
I can't get the drivers to work. Where did you get yours?
Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Man, I really thought I was going crazy.
Click to expand...
Click to collapse
Yeah I buy that, I couldn't even get the thing to try and connect at all with out switching usb connections on my computer.
stock cable works. I just rooted and ran into that problem. In order to get around it if you cant get a diff cable, make sure that b4 you connect your phone to your pc you turn off your internet so it doesnt auto dl the drivers. b4 u connect, dl the drivers for your phone from the root thread. Plug your phone into ur comp with the internet off and close any pop ups. Go to device manager look for the notification labled usb or captivateand right click and select update. Select search from file on disk or select file (something like that, i forget) and scroll and select the folder where you extracted the usb drivers. Make sure the checkbox that says search subfolders is checked and click next to install. two more drivers will pop up in device manager after u install the first one. Repeat the same procedure for both of them and then you should be able to use adb just fine to root.
Just wanted to further confirm that using a different microusb cable works! I keep reinstalling the drivers but it kept showing the device was offline. Then I tried my old Nokia N85 cable and it worked like charm! So weird how usb cables aren't made equally, unless Samsung designed the cable to prevent using adb?
I had this issue for a little while, but I installed the Samsung Kies software (which contains drivers) and uninstalled the ADB drivers I had originally downloaded. It's worked like a charm since then.
Go to SamsungApps.com and then use the canada site, as the software isn't really available in the US yet.
I have had no problems using the stock cable on my Laptop and work PC, both are Win 7 32bit. The same cannot be said for my my main home PC which is Win 7 64bit. Neither the stock cable nor an after market cable worked with ADB.
For the 32bit OSes I installed the Kies software and the usb device gets installed correctly. for the 64bit OS, I installed the Kies software but could get the phone to connect correctly. I then tried to install the 64bit drivers that are floating around the web. The 64 bit drivers worked enough to get the phone connected to the PC but when I tried to query "adb devices" the phone would always appear as offline. I've tried several things: install/uninstall drivers and software on the PC, restart the PC and Phone, change cables. Nothing seems to help on Win 7 64bit.
It seems to me that there might be a bug in the 64bit driver, though I have no proof of a bug.
I am going to keep playing with the 64bit OS until i figure it out or get so annoyed a that I just give up.
I'll be using my Win 7 32 bit laptop until I get the 64bit PC to work.
TimF said:
I have had no problems using the stock cable on my Laptop and work PC, both are Win 7 32bit. The same cannot be said for my my main home PC which is Win 7 64bit. Neither the stock cable nor an after market cable worked with ADB.
For the 32bit OSes I installed the Kies software and the usb device gets installed correctly. for the 64bit OS, I installed the Kies software but could get the phone to connect correctly. I then tried to install the 64bit drivers that are floating around the web. The 64 bit drivers worked enough to get the phone connected to the PC but when I tried to query "adb devices" the phone would always appear as offline. I've tried several things: install/uninstall drivers and software on the PC, restart the PC and Phone, change cables. Nothing seems to help on Win 7 64bit.
It seems to me that there might be a bug in the 64bit driver, though I have no proof of a bug.
I am going to keep playing with the 64bit OS until i figure it out or get so annoyed a that I just give up.
I'll be using my Win 7 32 bit laptop until I get the 64bit PC to work.
Click to expand...
Click to collapse
i've been able to install .apk's with my win7 64-bit ADB :O
all i did was install Samsung Kies.
i don't think i've ever had a problem...?
EDIT: i'm using the cable that came with it and no problems yet.
I'm running win 7 x64 and Kies did the trick for me. I haven't had a single issue connecting my phone since I did that.
Sent from my SAMSUNG-SGH-I897 using XDA App
Justa dding to the anecdotes.
I was having problems with the included cable using the front USB. It would show as Device Offline, also the charging wasn't very strong.
I switched to the onboard USB at the back of the case, and adb worked fine with the included cable.
Looks like I'll be picking up a couple extra USB cables so I won't have to continuously do the desk dive everytime I need to use it somewhere else.
1. I installed the kies drivers first and it would say offline when i checked the device through the cmd prompt.
2. I then installed the adb drivers and it then said the device was online.
3. i then rooted the phone and went on my way. i then tried it a second time and it said device offline.
4. nothing changed during this time except that i turned off debug mode, changed it to mass storage and plugged it back into the usb to transfer some files.
5. on returning to debug mode it no longer tells me the device is online. i have tried different USB ports as well.
6. i deleted the drivers, and reinstalled and it still says offline.
very frustrating.
wow. i forgot to try plugging it into another USB port. that worked. sorry about previous post.
I am running Windows 7 Home Premium 64bit on my laptop,
I installed the samsung 64bit drivers, it was an installer i found on the web, not the kies installer packaged driver one.
i changed my setting on my captivate to Mass Storage.
I mounted usb and everything works, by that I mean i was able to ADB like no tomorrow without any issues.
Then I made the mistake of installing Samsung Kies and that messed up my previous drivers and I wasnt able to ADB to my phone. I had to uninstall Samsung Kies and my phone still wasnt being found I still couldnt ADB.
my solution to fixing was restarted my phone and computer, without my phone connected to USB i re-installed the Samsung 64bit Driver Package, then hooked up my phone made sure Mass Storage was selected and Mounted USB and bam was able to ADB again.
hope this helps! also i have been doing videos helping people with issues with samsung's captivate on youtube, youtube.com/johnnyzappone if anyone wants to check em out, if anyone has any suggestions please let me know and id be happy to release a video!
I resolved my issues, I plugged the stock cable into one of the rear usb ports and the device is now available on my main PC Win 7 64 bit.
wimbet said:
Ok I almost pulled my hair out, but I found the problem.
For some reason, ADB does not work with the Samsung USB cable that came with the Captivate.
I switched to another USB cable and it works just fine.
Click to expand...
Click to collapse
Confirmed this made my device stop appearing as offline with adb.
How it is even possible that the cable prevents (only) adb access on the PC, I have no idea.
I have windows 7 and mac osx and I can use adb with both using the stock USB.
i have debugging active.
lol @ the samsung cable.
i've 2 indentic cables here, one doesn't work. plugged in the other one and this one works...
maby its just a strange issue on windows, next time try to pull out the cable and put in back in then connect your device again this should work.... :s
because earlier the cable just worked fine and now it doesn't.. so good luck xD
joelpt said:
Confirmed this made my device stop appearing as offline with adb.
How it is even possible that the cable prevents (only) adb access on the PC, I have no idea.
Click to expand...
Click to collapse
also can confirm PITA
Hi everyone,
I'm having issues connecting my Samsung Captivate to my computer. For about a week, it worked fine, I was able to transfer files to my phone but recently I noticed that the "USB connected" notification is not showing on the phone when plugged in to the computer.
Now, when I plug in my phone to the computer it just charges but doesn't comunicate with my computer. A friend of mine bought the same phone right after I did and he gets the "USB connected" connected when he plugs in his.
I tried using his USB cable but again, the phone is not recognized by Windows nor the phone detects it is connected to the computer. I've tried installing several USB drivers that I've come across on several forums, but nothing. I even downloaded and updated Kies to the latest version, but still nothing.
My phone is unlocked and NOT rooted, and I'm using Windows 7 x64. I've set the USB Settings to Mass Storage, even to Ask on Connection, but it doesn't ask anything when I connect the phone to a USB on my computer.
Sometimes Windows knows there is a device connected but says it couldn't recognize it.
I already did a factory reset, but the issue was not solved. I've tried connecting it to other computers, but still hasn't been able to connect my phone correctly.
What could it be?
Thanks!
Hmm. You have Mass Storage selected and up-to-date USB drivers. Try selecting USB-Debugging and Stay Awake in the Development option of your phone. If that doesn't fix it, then I have a few other ideas.
Make sure the usb door is completely open, it should click into place, some users have reported this solves their usb issues.
I did what you told me, but still my phone ain't recognized by Windows nor my phone is aware that it has been conected to a computer
What other ideas do you have in mind?
catire said:
Make sure the usb door is completely open, it should click into place, some users have reported this solves their usb issues.
Click to expand...
Click to collapse
I'm sure usb door is completely opened
Have you tried using a different USB outlet on your computer? I had this same issue when I plugged my phone up using the USB outlet on the front of my computer then when I tried the one on the back of my computer it worked just fine.
Are you running a launcher app? I use launcher pro and can't connect until I change back to the default launcher with home switcher and launch it.
jgchaval said:
I did what you told me, but still my phone ain't recognized by Windows nor my phone is aware that it has been conected to a computer
What other ideas do you have in mind?
Click to expand...
Click to collapse
First off, think back. If it worked for a week and then suddenly stopped, what changed? Maybe you updated something on Windows or changed something on your phone. There's a reason it just stopped.
You can try using a free program called USBDeview.
It might do the trick for you and help you install the correct drivers. I'm thinking you no longer have them.
1. Download USBDeview (link is above)
2. Plug your phone in and open the program. Find all the HTC drivers-delete them
3. Unplug your phone and plug it back in
4. The correct drivers should install automatically
You can also try updating the drivers manually.
Galaxy S drivers (These are for ADB, but will work fine)
1. Click the Start Menu on your computer and right click "Computer"
2. Choose "Manage" --> it will ask you to continue --> "Device Manager"
3. Plug you phone in and look for it to pop up, probably under Portable Devices
4. Right click --> "Properties" --> "Update Driver" --> "Browse" --> "Let Me Pick" --> and navigate to the location you extracted the drivers to.
This is most likely a driver issue. I doubt your phone is messed up. You'll get it eventually. I also had a hard time getting my Captivate to connect. After uninstalling and reinstalling my drivers (more than once) it finally worked. One last thing, for now. When you uninstall drivers, also make sure you don't have any installed under your program list. As in, Control Panel --> Uninstall a program. Good luck!
climber1872000 said:
Have you tried using a different USB outlet on your computer? I had this same issue when I plugged my phone up using the USB outlet on the front of my computer then when I tried the one on the back of my computer it worked just fine.
Click to expand...
Click to collapse
A friend of mine, who bought the same phone on the same day as I did, plugged in his phone on my computer using my cable to the same port my phone was connected, and he did get the "USB Connected" notification on his phone
govgeek said:
Are you running a launcher app? I use launcher pro and can't connect until I change back to the default launcher with home switcher and launch it.
Click to expand...
Click to collapse
No, i'm using the default launcher that comes with the Captivate
jgchaval said:
Hi everyone,
I'm having issues connecting my Samsung Captivate to my computer. For about a week, it worked fine, I was able to transfer files to my phone but recently I noticed that the "USB connected" notification is not showing on the phone when plugged in to the computer.
Now, when I plug in my phone to the computer it just charges but doesn't comunicate with my computer. A friend of mine bought the same phone right after I did and he gets the "USB connected" connected when he plugs in his.
I tried using his USB cable but again, the phone is not recognized by Windows nor the phone detects it is connected to the computer. I've tried installing several USB drivers that I've come across on several forums, but nothing. I even downloaded and updated Kies to the latest version, but still nothing.
My phone is unlocked and NOT rooted, and I'm using Windows 7 x64. I've set the USB Settings to Mass Storage, even to Ask on Connection, but it doesn't ask anything when I connect the phone to a USB on my computer.
Sometimes Windows knows there is a device connected but says it couldn't recognize it.
I already did a factory reset, but the issue was not solved. I've tried connecting it to other computers, but still hasn't been able to connect my phone correctly.
What could it be?
Thanks!
Click to expand...
Click to collapse
I just did the new AT&T update and mine is now having this problem. I have to manually go into manage applications > usb settings > mass storage to get it to work now
a.n said:
First off, think back. If it worked for a week and then suddenly stopped, what changed? Maybe you updated something on Windows or changed something on your phone. There's a reason it just stopped.
You can try using a free program called USBDeview.
It might do the trick for you and help you install the correct drivers. I'm thinking you no longer have them.
1. Download USBDeview (link is above)
2. Plug your phone in and open the program. Find all the HTC drivers-delete them
3. Unplug your phone and plug it back in
4. The correct drivers should install automatically
You can also try updating the drivers manually.
Galaxy S drivers (These are for ADB, but will work fine)
1. Click the Start Menu on your computer and right click "Computer"
2. Choose "Manage" --> it will ask you to continue --> "Device Manager"
3. Plug you phone in and look for it to pop up, probably under Portable Devices
4. Right click --> "Properties" --> "Update Driver" --> "Browse" --> "Let Me Pick" --> and navigate to the location you extracted the drivers to.
This is most likely a driver issue. I doubt your phone is messed up. You'll get it eventually. I also had a hard time getting my Captivate to connect. After uninstalling and reinstalling my drivers (more than once) it finally worked. One last thing, for now. When you uninstall drivers, also make sure you don't have any installed under your program list. As in, Control Panel --> Uninstall a program. Good luck!
Click to expand...
Click to collapse
I did all that yesterday, but the device ain't listed in the USBDeview nor it shows up in the Device Manager
did you finally fix this problem? because I'm having the same issue here
Same here. It was working fine, I could connect to Kies, transfer music in Media mode and see both sd drives in Mass Storage mode. Then I rooted today and now I get nothing. In anything but Kies mode I get the Windows Bong of Recognition, but still not visible in Explorer. Also, my Home screen stays active instead of switching to the USB animation like it did before. I know this can't be a consequence of rooting the phone, can it?
EDIT: More weirdness, with the phone connected in Mass Storage mode if I look at My Computer in Explorer there are 2 extra drives showing, but they are greyed out and when I click on either of them it asks me to insert a card as the drive is empty. WTF???
UPDATE: I unrooted and managed to get my USB connection back to working. It is still a bit flaky as I sometimes have to disconnect/reconnect several times before it works, but at least it now works although it sometimes loses sync in the middle of transferring a file. Can't imagine why simply rooting the phone would cause the loss of USB connectivity. I am going to reroot and see if it occurs again.
OK, a rerooted the phone and this problem is now back. I have no problem connecting while in debugging mode. I installed OCD (non-Market apps mod) and when I turn off debugging and connect I get the Windows bong and see the USB icon in the Notification bar, but the MTP screen never comes up and I can't see the phone in Explorer (Mass Storage mode) or in WMP (Media mode). Kies can;t see it in that mode, either. I really don't want to have to unroot every time I want to look at the phone contents. Any ideas? PLEASE!
I'm having a similar problem - I installed the Perception ROM and immediately afterwards I can't see the USB connection at all from my PC or my Mac. The USB icon on the phone does not come up either.
I'm trying to get my hands on a different cable - but the weird thing is when I plug the USB into my computer the phone starts charging for like half a second and then stops.
This is really annoying. I tried changing the rom to Cognition 3.02 but that didn't change anything.
There are a few topics on this here on the forum - I would recommend the following:
How are you rooting your phones? Nobody has said exactly how they are doing this. Are you using recommended rooting methods? Or are you using some app found on the market?
Make sure you have USB De-Bugging is turned on.
Make sure you have it listed as ask on connection.
For those who can see the drives in Windows...
Plug in your phone and then pull down your notification bar and click on the USB connected message. It will give you an option there to mount your SDCard(s) to Windows allowing you to transfer files.
Kies is junk - I'd recommend uninstalling it as it seems to cause more issues then it solves.
Use the drivers I have posted in the Q&A section (these are the ones that are linked in Design Gears Odin 1 Click Back to Stock post btw) - but I would try and COMPLETELY removing the pre-existing drivers before installing the new ones.
Make sure the USB Cable is plugged into the back USB port that is directly on your motherboard - this will ensure it's not a computer/hardware related issue.
I know of one user who had to go through his computer and manually remove all remnants of other drivers. I have my phone connected to both a Windows XP 32bit and a Windows 764bit systems and have been lucky to not have any USB issues.
If none of that works - I'd suggest taking it to your nearest AT&T/Rodgers shop and see if they can get the phone to connect (make sure it's back to stock!). If not they should warranty replace the device.
avgjoegeek said:
There are a few topics on this here on the forum - I would recommend the following:
How are you rooting your phones? Nobody has said exactly how they are doing this. Are you using recommended rooting methods? Or are you using some app found on the market?
Make sure you have USB De-Bugging is turned on.
Make sure you have it listed as ask on connection.
For those who can see the drives in Windows...
Plug in your phone and then pull down your notification bar and click on the USB connected message. It will give you an option there to mount your SDCard(s) to Windows allowing you to transfer files.
Kies is junk - I'd recommend uninstalling it as it seems to cause more issues then it solves.
Use the drivers I have posted in the Q&A section (these are the ones that are linked in Design Gears Odin 1 Click Back to Stock post btw) - but I would try and COMPLETELY removing the pre-existing drivers before installing the new ones.
Make sure the USB Cable is plugged into the back USB port that is directly on your motherboard - this will ensure it's not a computer/hardware related issue.
I know of one user who had to go through his computer and manually remove all remnants of other drivers. I have my phone connected to both a Windows XP 32bit and a Windows 764bit systems and have been lucky to not have any USB issues.
If none of that works - I'd suggest taking it to your nearest AT&T/Rodgers shop and see if they can get the phone to connect (make sure it's back to stock!). If not they should warranty replace the device.
Click to expand...
Click to collapse
This isn't my first rodeo... But to answer your questions:
I used the rooting method posted in XDA forums - the one-click rooting.
I've used the drivers included in the xda-forum. Not the kies software.
The only thing that changed was the loading of a new custom rom. The cable works (confirmed on my friend's phone). I can't get odin to restore back to stock because I can't get the computer to recognize the phone in either normal or in download mode. I've restored to stock using the jh7 in the stickied q&a thread
I don't think it's a hardware issue either - I think it's software-based. I'm going to try to take it to an at&t store today at lunch to see what they say.
I also have that problem only I noticed it when I cleared the dalvik cache. It messed up the auto rotate so it was always sideways and now I have no connectivity to the PC. Let me know how ATT treats you.
greeto4 said:
I also have that problem only I noticed it when I cleared the dalvik cache. It messed up the auto rotate so it was always sideways and now I have no connectivity to the PC. Let me know how ATT treats you.
Click to expand...
Click to collapse
What rom are you on
Does anyone else have this problem? When I connect my phone to either my laptop (winXP) or my desktop (win7x64) I periodically - constantly, really - get this message:
"One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message."
When I click the message, it identifies my phone as a Generic USB Hub (4 ports) with the first child being a USB Mass Storage Device, the second being the problematic "Unknown Device" and the last two are "Unused Port"s.
This happens whether the phone is in charge-only or mass storage mode. I tried installing the autoplay drivers and that didn't help, so I uninstalled them. No hubs are involved - I've always plugged straight into the tower or laptop. I've also tried two different quality (first party Motorola) cables.
Mass storage mode works fine despite the error - I can access the Internal storage as well as the SD card. Is this a problem with my phone, or am I missing some software on the Windows side?
Ben
crt_ben said:
Does anyone else have this problem? When I connect my phone to either my laptop (winXP) or my desktop (win7x64) I periodically - constantly, really - get this message:
"One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message."
When I click the message, it identifies my phone as a Generic USB Hub (4 ports) with the first child being a USB Mass Storage Device, the second being the problematic "Unknown Device" and the last two are "Unused Port"s.
This happens whether the phone is in charge-only or mass storage mode. I tried installing the autoplay drivers and that didn't help, so I uninstalled them. No hubs are involved - I've always plugged straight into the tower or laptop. I've also tried two different quality (first party Motorola) cables.
Mass storage mode works fine despite the error - I can access the Internal storage as well as the SD card. Is this a problem with my phone, or am I missing some software on the Windows side?
Ben
Click to expand...
Click to collapse
Have you tried installing the WHQL drivers for this device from here: http://www.lgforum.com/resources ?
majorpay said:
Have you tried installing the WHQL drivers for this device from here: http://www.lgforum.com/resources ?
Click to expand...
Click to collapse
Thanks for the suggestion major. I tried those drivers with no luck - the message still pops up frequently in both charge and mass storage modes.
crt_ben said:
Thanks for the suggestion major. I tried those drivers with no luck - the message still pops up frequently in both charge and mass storage modes.
Click to expand...
Click to collapse
Odd... I had issues with the original drivers, but once installed, I never had another prompt again.
edit: I had it one more time, but it found them and installed them
that's very interesting. i also use 2 machines--one with xp and one with win7. my usb connection worked flawlessly on both. fyi...my connection default is mass storage, and i've actually never tried the other options. i wonder why the difference? did you make any changes? are you rooted? i am not.
gr33nT said:
that's very interesting. i also use 2 machines--one with xp and one with win7. my usb connection worked flawlessly on both. fyi...my connection default is mass storage, and i've actually never tried the other options. i wonder why the difference? did you make any changes? are you rooted? i am not.
Click to expand...
Click to collapse
Hi gr33nT,
Thanks for responding. I'm 100% stock at the moment, not rooted or anything (though it will be soon ) Sometimes I use charge only if I have it connected to my laptop at work but I still want to listen to music from the SD card. I may see if I can get Verizon to swap out the phone, the message pops up all the time and it's getting annoying...
A quick follow-up on this one: I tried the stock LG cable on my win7 machine (I had been using moto cables). I installed BOTH the bootstrap drivers as well as the LG drivers from the web - still happening. I rooted with these drivers via S1C so I know the drivers are good. If nobody else has run into this, something is probably wonky with my phone, so I'm probably going to exchange it.
For mine, every time I connect, it asks me if I want to install bootstrap. Even though, they have already been installed cuz I am rooted.
I've had the same issue both as stock, and rooted and in every configuration with the phone and PC you can think of. I've downloaded the drivers and installed them from both the phone and web site all to no avail. This is really getting annoying.
I hope someone has a fix for this.
AndroidCraig said:
I've had the same issue both as stock, and rooted and in every configuration with the phone and PC you can think of. I've downloaded the drivers and installed them from both the phone and web site all to no avail. This is really getting annoying.
I hope someone has a fix for this.
Click to expand...
Click to collapse
Hmm...that is troubling. I'm still having the issue running the stock rom and rooted, now. When I get time I'm going to drop by the Verizon store and hopefully they'll replace the phone - I suggest you try the same, as I doubt it's the computers we're using. My win7 box and winXP work laptop could hardly be more different!
I doubt a replacement will fix anything, I experience the same thing as majorpay. Drivers worked for a while and then it started asking for it again. This also causes issues when using usb tether as its connecting and disconnecting. The issue is not present when used as a mass storage device.
bwhxeon said:
I doubt a replacement will fix anything, I experience the same thing as majorpay. Drivers worked for a while and then it started asking for it again. This also causes issues when using usb tether as its connecting and disconnecting. The issue is not present when used as a mass storage device.
Click to expand...
Click to collapse
Hi bwhxeon,
The issue (USB device not recognized - it sounds like you're referring to the autoplay driver installation) happens for me in mass storage mode also. I believe it has to be the phone as I've never had this problem on any of my PCs with my OG Droid or any other USB device. With this phone, I have the problem on all of my PCs.
I had the same problem. The error popups seemed random at first. I noticed if I enabled/disabled the WIFI on the device while it was connected, I could make the error popup.
I ended up getting a new replacement device when I also noticed the 4G Hotspot wasn't working either even after a factory restore. There was definitely a hardware issue with the phone.
USB Unknown Device
same issue here.. when using ADB though I have to set to Internet Connection then it goes away for a while until I want mass storage or just charge from USB again, then re-appears.
LG is not like most other phones as in usb debugging only works in internet connection mode where others go into it as soon as you plug it in.
Just kind of scanned this thread but have you tried a different USB cable? I was having a problem with mine only wanting to charge with the stock so I grabbed another cable and it has worked right ever since
Same issue, two different pcs, with two different cables. Bootstrap does not load anymore so I am using the drivers from the links, both sets of Lg verizon drivers
Sent from my VS910 4G using XDA App
Like in the topic. My pc can't seem to notice my HTC one phone. Not at all.
Some details:
PC - Laptop Lenovo Y580
Operating system - Windows 8.1 64 bit
Android - 5.0.2 I think (Lollipop)
My phone notices the cable (asks for internet tethering etc.) but I don't see it anywhere in pc's Device Manager (neither does HTC Sync Manager).
I've tried numerous things. I installed HTC Sync Manager, I've installed HTC drivers separately, reinstalled generic USB driver and drivers for USB 3.0, changed cable, changed port to another USB 2.0, change to USB 3.0, checked if it works on friend's pc (nope), reinstalled almost any of above mentioned things witt antivirus disabled, with firewall disabled, with almost anything that can be disabled. Nothing. It's not that case of wrong driver. My pc don't see this phone at all.
To be honest I'm tired. Like really tired. I've spent all free time I could find last week trying to somehow make it work. With no effect whatsoever. I don't see even slice of progress (noticing SOMETHING in device manager would be nice). I would love to see some way to analise this. I'm getting closer and closer to just buying new phone. Even though I don't want one, but I can't do any testing with this device.
EDIT: Few things I've remembered about my tries: I've tried both USB debugging on and off, and I've also already done factor reset of the phone - to no effect obviously.
When connected to pc, phone can be charged, but PC doesn't react in any way (no "USB connected", popping up HTC Sync Manager or "Media device connected" info).
I'll appreciate any help. Especially if it manages to change something in my situation.
Best regards,
Hisuu
Hisuu said:
Like in the topic. My pc can't seem to notice my HTC one phone. Not at all.
Some details:
PC - Laptop Lenovo Y580
Operating system - Windows 8.1 64 bit
Android - 5.0.2 I think (Lollipop)
My phone notices the cable (asks for internet tethering etc.) but I don't see it anywhere in pc's Device Manager (neither does HTC Sync Manager).
I've tried numerous things. I installed HTC Sync Manager, I've installed HTC drivers separately, reinstalled generic USB driver and drivers for USB 3.0, changed cable, changed port to another USB 2.0, change to USB 3.0, checked if it works on friend's pc (nope), reinstalled almost any of above mentioned things witt antivirus disabled, with firewall disabled, with almost anything that can be disabled. Nothing. It's not that case of wrong driver. My pc don't see this phone at all.
To be honest I'm tired. Like really tired. I've spent all free time I could find last week trying to somehow make it work. With no effect whatsoever. I don't see even slice of progress (noticing SOMETHING in device manager would be nice). I would love to see some way to analise this. I'm getting closer and closer to just buying new phone. Even though I don't want one, but I can't do any testing with this device.
I'll appreciate any help. Especially if it manages to change something in my situation.
Best regards,
Hisuu
Click to expand...
Click to collapse
When you plug in your phone to the computer do you get the following:
USB Connected
HTC Sync Manager
Media device [MTP] connected
Can you charge your phone while connected to the computer or do you have to use the wall charger to charge your phone? If you don't see the programs listed above, it sounds like a hardware issue with the USB port on your phone.
@majmoz
When you plug in your phone to the computer do you get the following:
USB Connected
HTC Sync Manager
Media device [MTP] connected
Click to expand...
Click to collapse
No, no and no. My pc seems to not react with anything (neither did friend's pc).
Can you charge your phone while connected to the computer or do you have to use the wall charger to charge your phone? If you don't see the programs listed above, it sounds like a hardware issue with the USB port on your phone.
Click to expand...
Click to collapse
Yes, I can charge phone when connected to PC.
And as I mentioned phone actually notices it's connected to something, and asks what mode to enter (USB tethering, smart network sharing etc.). But it also seems... kinda dodgy. Sometimes phone doesn't react, I have to reconnect or even restart it. Sometimes "USB connected, Tap to change settings" stays... even after I have already disconnected it .
Few things I've remembered about my tries: I've tried both USB debugging on and off, and I've also already done factor reset of the phone - to no effect obviously. (I'll add this info to 1st post to gather info in one place).
Any other ideas?
This topic is my last resort, because I'm out of ideas and start leaning to buying new phone just for testing purposes (either Samsung Galaxy S3 or Nexus4 I guess).
Hisuu said:
Any other ideas?
This topic is my last resort, because I'm out of ideas and start leaning to buying new phone just for testing purposes (either Samsung Galaxy S3 or Nexus4 I guess).
Click to expand...
Click to collapse
start from scratch: Uninstall HTC sync and all the drivers you have tried. Then install HTC drivers only (not the generic drivers) or install HTC sync and uninstall it but keep the drivers installed (the idea is to have the driver installed but not HTC Sync, we don't want Sync to interact with the phone).
Try another USB cable but make sure its Data enabled (not only a charging cable). Some cheap cables are for charging only, no data connection.
Try another USB port, use 2.0 usb ports, do not use any external usb hub, use th eport directly on your motherboard (at the back of your computer).
Try with another computer
Clean your phone usb port using a cotton swab with some isotropic alcohol and then apply (spray) a light coat of electrical enhancer on your usb port (see your local electronic supplier or even some hardware stores)
alray said:
start from scratch: Uninstall HTC sync and all the drivers you have tried. Then install HTC drivers only (not the generic drivers) or install HTC sync and uninstall it but keep the drivers installed (the idea is to have the driver installed but not HTC Sync, we don't want Sync to interact with the phone).
Try another USB cable but make sure its Data enabled (not only a charging cable). Some cheap cables are for charging only, no data connection.
Try another USB port, use 2.0 usb ports, do not use any external usb hub, use th eport directly on your motherboard (at the back of your computer).
Try with another computer
Clean your phone usb port using a cotton swab with some isotropic alcohol and then apply (spray) a light coat of electrical enhancer on your usb port (see your local electronic supplier or even some hardware stores)
Click to expand...
Click to collapse
Tried other cables (data enabled, they were from different phones), as well as different USB ports (both 2.0 and 3.0). Also tried another pc (no luck).
Uninstalled HTC Sync and drivers so many times I can't count it ;]
I'll try to clean the port and maybe use motherboard on friend's pc (on his machine I've only used front panel). Hopefully something works. Thanks for your input, I appreciate it.
Hi,
I connected my note 5 to my laptop today, and surprise surprise, it is no longer recognized by the PC (though it charges). It used to be fine, I don't know what changed!
I tried different cables, different USB ports and different laptops
I tried to plug it in normal mode, safe mode, recovery mode and download mode
I tried switching USB debugging on/off
I tried the *#0808# menu, and I tried MTP+ADB and CP options
I uninstalled drivers from the PC and installed the latest from the samsung website
I tried both kies and smart switch
nothing worked! I am not doing a factory reset because I have seen many people do it for other devices and none of them solved it this way! I'm waiting for the Marshmallow update, maybe it will fix this annoying issue. Meanwhile do you have any other ideas guys?
Hazardous Pain said:
Hi,
I connected my note 5 to my laptop today, and surprise surprise, it is no longer recognized by the PC (though it charges). It used to be fine, I don't know what changed!
I tried different cables, different USB ports and different laptops
I tried to plug it in normal mode, safe mode, recovery mode and download mode
I tried switching USB debugging on/off
I tried the *#0808# menu, and I tried MTP+ADB and CP options
I uninstalled drivers from the PC and installed the latest from the samsung website
I tried both kies and smart switch
nothing worked! I am not doing a factory reset because I have seen many people do it for other devices and none of them solved it this way! I'm waiting for the Marshmallow update, maybe it will fix this annoying issue. Meanwhile do you have any other ideas guys?
Click to expand...
Click to collapse
hi,
you don't say what Laptop o/s you using on laptop.?
Windows 10, Windows 8.1 Windows 8 or Windows 7...... or Apple o/s.?
Briefly my take is on this is, most probably the laptop and not phone.?
(Yes, i might be wrong of course.)
My reason is, i have Windows 10 laptop
and sometimes / a few time, ) my
laptop does not recognize my Note5
Yes, , it charges phone (just like yours) but does not recognize phone.!
I then have to re install drivers for phone I use Smart Switch to re install drivers.
Then it works ok for a while etc..
Why don't you test phone on someone else's pc or laptop to make sure.?
Overall my Note5 is mostly recognized by laptop
Good luck
willcor said:
hi,
you don't say what Laptop o/s you using on laptop.?
Windows 10, Windows 8.1 Windows 8 or Windows 7...... or Apple o/s.?
Briefly my take is on this is, most probably the laptop and not phone.?
(Yes, i might be wrong of course.)
My reason is, i have Windows 10 laptop
and sometimes / a few time, ) my
laptop does not recognize my Note5
Yes, , it charges phone (just like yours) but does not recognize phone.!
I then have to re install drivers for phone I use Smart Switch to re install drivers.
Then it works ok for a while etc..
Why don't you test phone on someone else's pc or laptop to make sure.?
Overall my Note5 is mostly recognized by laptop
Good luck
Click to expand...
Click to collapse
Thank you for the reply.
As I have already mentioned, I did try another laptop. Mine is windows 8.1 x64 and my brother's windows 10 x64. I tried re installing the drivers from smart switch but to no avail.
Any other ideas?
Hazardous Pain said:
Thank you for the reply.
As I have already mentioned, I did try another laptop. Mine is windows 8.1 x64 and my brother's windows 10 x64. I tried re installing the drivers from smart switch but to no avail.
Any other ideas?
Click to expand...
Click to collapse
hi ,
why i still think its laptop /pc drivers related.
(But yes ,i might be completely wrong ..?)
i have laptop win 10 x64 also.
The issue is of laptop, not always recognizing a device /similar as yours ,but charging device .
Other devices, when trying to connect to laptop (,not just my Note5 ),( from time to time) eg Note 2,..3 ..4 , USB flashstick ..my Polar M400 running watch etc .Device is not recognized but charging .
So for me,
its just not Note 5 but other devices also (.from time to time) .
My "take " on this issue is that it points between drivers (pc ,laptop) //// relevant devices eg Note 5 ..etc . and not just the firmware issue of Note 5 ,??
but yes, as stated i might be wrong .
good luck
Post note ,
i have to add reinstalling drivers "sometimes " help " ,
but it happens again, later. ( not recognizing device )
So i am pointing fingers, at Windows o/s + the "company/maker " of laptop ..pc and + devices .The compatibility between all three above ,combined and yes i had similar issues ( from time to time with Win 8 ../Win 8.1 etc ).
Yet, i have also found that certain of my devices
that work nearly 100% of time on my laptop !,
which indicates to me, the compatibility of devices between device /laptop ,is very good ..??
I have a note 2 and it works every time when I plug it to either pc. My laptop is lenovo with all the latest drivers. Hopefully, marshmallow will address this issue because otherwise, this means that I can't root my device.
Hazardous Pain said:
I have a note 2 and it works every time when I plug it to either pc. My laptop is lenovo with all the latest drivers. Hopefully, marshmallow will address this issue because otherwise, this means that I can't root my device.
Click to expand...
Click to collapse
Wait, have you tried this yet?
Pull down notification menu while phone is plugged in and there should be a option for changing from charge mode to mtp and such. Just pull down notification and tap on the biodiversity that's lasted.
Sent from my SM-N920T using Tapatalk
Hazardous Pain said:
I have a note 2 and it works every time when I plug it to either pc. My laptop is lenovo with all the latest drivers. Hopefully, marshmallow will address this issue because otherwise, this means that I can't root my device.
Click to expand...
Click to collapse
hi ,
strange ,
just for the record i also have a Lenovo Flex 2 laptop ( x64 ) Win 10 .!!!
i have rooted all my devices on Lenovo laptop ( Note 2, Note 3 , Note 4 and my Note 8.0 tablet etc )
Yet , i am at moment not interested in rooting my Note5 ( i have it already a couple of months )
I am happy keeping myself busy with Theme store ,tweaks/beta apps and lately with the interesting Lockmaster app( Play store ) for lockscreen ... etc .
If i get the root "urge " i pick up my other rooted devices and use them .or /update or/ install root only tweaks/apps etc. for my rooted devices .!!
i hope Marshmallow fixes your issues .!!
good luck
Jammol said:
Wait, have you tried this yet?
Pull down notification menu while phone is plugged in and there should be a option for changing from charge mode to mtp and such. Just pull down notification and tap on the biodiversity that's lasted.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
There are no options in the pull-down menu it just says cable charging
Hazardous Pain said:
There are no options in the pull-down menu it just says cable charging
Click to expand...
Click to collapse
Did you try clicking where it says Cable Charhing?
Edit: Never mind that. I see what you mean. That's odd it's not there for you. It definitely sounds like a PC issue. You can try completely removing all Samsung drivers and start over. Just using the Uninstaller will not cut it though. You'll have to do a system level cleaning of all samsung drivers.
Sent from my SM-N920T using Tapatalk
Hazardous Pain said:
Hi,
I connected my note 5 to my laptop today, and surprise surprise, it is no longer recognized by the PC (though it charges). It used to be fine, I don't know what changed!
I tried different cables, different USB ports and different laptops
I tried to plug it in normal mode, safe mode, recovery mode and download mode
I tried switching USB debugging on/off
I tried the *#0808# menu, and I tried MTP+ADB and CP options
I uninstalled drivers from the PC and installed the latest from the samsung website
I tried both kies and smart switch
nothing worked! I am not doing a factory reset because I have seen many people do it for other devices and none of them solved it this way! I'm waiting for the Marshmallow update, maybe it will fix this annoying issue. Meanwhile do you have any other ideas
Click to expand...
Click to collapse
navdeepavi said:
Hazardous Pain said:
Hi,
I connected my note 5 to my laptop today, and surprise surprise, it is no longer recognized by the PC (though it charges). It used to be fine, I don't know what changed!
I tried different cables, different USB ports and different laptops
I tried to plug it in normal mode, safe mode, recovery mode and download mode
I tried switching USB debugging on/off
I tried the *#0808# menu, and I tried MTP+ADB and CP options
I uninstalled drivers from the PC and installed the latest from the samsung website
I tried both kies and smart switch
nothing worked! I am not doing a factory reset because I have seen many people do it for other devices and none of them solved it this way! I'm waiting for the Marshmallow update, maybe it will fix this annoying issue. Meanwhile do you have any other ideas
Click to expand...
Click to collapse
The issue is not with your device. It's because of Windows. Is there another computer that you can use to connect your device to that you have never connected to before? Also make sure that you are using either the cable that came with your device, or at least a good quality cable. I've had that issue occur in the past because I was using a cheap cable.
Click to expand...
Click to collapse
Jammol said:
The issue is not with your device. It's because of Windows. Is there another computer that you can use to connect your device to that you have never connected to before? Also make sure that you are using either the cable that came with your device, or at least a good quality cable. I've had that issue occur in the past because I was using a cheap cable.
Click to expand...
Click to collapse
I did plug it in my brother's laptop but no dice. I tried the OEM cable and an Asus cable on USB 2 and 3 ports, it did not work on either pc. How can I completely uninstall samsung drivers?
For users having the same issue, I found a solution (which also fixes all charging issues by the way).
If you look at the charging port, you will see a "tongue" where the pins connect. We all know that fast charging requires 5 pins not 4. The OEM cable comes with 5 as you all know. However, I found the OEM cable to be very fragile and not reliable, one pin tends to get bent without much pressure. This leads to the "tongue" going down somehow. The fix is to get the "tongue" up a bit, use a toothpick or something that does not conduct power. As for the cable, I suggest you use an Asus cable (I have 3 of those, 2 from my nexus 7s and 1 from my Zenwatch). Asus cables come with 5 pins and they are sturdier than Samsung's and they are a bit longer as well. Now the phone charges properly, fast charging and all and the computer recognizes it once again.
Hope this helps you too
Hazardous Pain said:
For users having the same issue, I found a solution (which also fixes all charging issues by the way).
If you look at the charging port, you will see a "tongue" where the pins connect. We all know that fast charging requires 5 pins not 4. The OEM cable comes with 5 as you all know. However, I found the OEM cable to be very fragile and not reliable, one pin tends to get bent without much pressure. This leads to the "tongue" going down somehow. The fix is to get the "tongue" up a bit, use a toothpick or something that does not conduct power. As for the cable, I suggest you use an Asus cable (I have 3 of those, 2 from my nexus 7s and 1 from my Zenwatch). Asus cables come with 5 pins and they are sturdier than Samsung's and they are a bit longer as well. Now the phone charges properly, fast charging and all and the computer recognizes it once again.
Hope this helps you too
Click to expand...
Click to collapse
so meaning the charging port "tounge" need to be lift up a bit? so not the cable problem? im on this situation now.. i tried all my cables and only fast charging.
jayyusz said:
so meaning the charging port "tounge" need to be lift up a bit? so not the cable problem? im on this situation now.. i tried all my cables and only fast charging.
Click to expand...
Click to collapse
Yes, exactly
Hazardous Pain said:
Yes, exactly
Click to expand...
Click to collapse
I'm having this same problem these same problems. Other then I'm not able to get it to recognize even after doing everything that was said to do in this thread.
I feel like I'm missing a file? I was messing with them and just may think that could be my problem. is there anything else that has not been said in this thread I could do to fix this problem? When connected to my computer it recognize it as a charger. I can't access my files from my computer to my phone.
any help would be very helpful! Thanks!
I'm having the exact same problem but now I tried to use Flashify to go back to original recovery instead of TWRP & now by recovery or boot IMG is screwed so it wont even boot to recovery..
It boots only to download mode & is not recognized by any PC we have, with every cable I've tried.. uhhgggggg
I was having the same issue. Here is what solved it for me:
• Disconnect the usb cable.
• Go to Control Panel\All Control Panel Items\Troubleshooting\Hardware and Sound
o Go down to device / hardware and devices – click on that
o Follow instructions to correct issues. This found I needed a bus device driver update.
o Let it update and once done go out.
• On PC - Go to Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings - go down until you get to the part that says "All Networks" ...expand the list by clicking on the arrow to the right. In this area you will see "Media Streaming" There should be an area highlighted in blue that says "Choose media streaming options" click on that. Make sure you "allow all" . Once that is done, click "ok" at the bottom. Plug your device into the usb and it should be recognized. Seems a recent Windows update has that filter off.
• Now, restart your computer.
• Use original usb cord that came with phone! Plug in phone then plug in usb to computer.
• It should recognize your device now.
I now have to restart computer every time I want to connect my device but it works.
Hi I am having that same problem with my note 4. It doesn't seem to be a pc problem as no pc at all none Nada recognizes the phone. Windows 7 to Windows 10. None. Used 2 workmates of mine who also have note 4s on my laptop and all the laptops i used i used their phine on itand they worked so blaming the pc seems to be out of the equation..your solution and all those settings have been untouched as it has all devices allowed ..... tried cleaning the connectors and also different oem cables to no avail ..The only thing I have not done is change the logic board
Hi I hope somebody can help me. I am having exactly the same issue. though I don't think its PC or Laptop problem. I have two Note 5 the other one is working just fine, while the other Note 5 that was just charging was connected I noticed that running *#0808# I can select AP and CP but MTP+ADP was not selected and if I try selecting the radio button I will be able to but after pressing Ok or Reboot it back to no selection at all. Which I observe on my other Note 5 that was working its always selected every time I run *#0808#.
One more thing noticed is that on the Note 5 that was not working I boot it download (ODIN) mode and connect back to USB of my PC and Laptop, I hear a sound (the typical sound in windows once you connect any USB device) though I cannot access it I am positive that my USB port on both device are in good condition and since it was detected in windows through ODIN boot mode I was under the impression that its a phone software/firmware related. Can somebody help me on this one? thanks