Database Develop

Krypton compatibility on Huawei Mate 7

Hello,
i've attempted to install Kodi 17 Released version ARMV7A(32bit) and also ARMV8A(64bit) but none of them are working on Huawei Ascend Mate 7.
The version ARMV7A(32bit) install correctly but Kryption is crashing after the splash screen.
Mate 7 is running on Marshmallow 6.0 SDK 23.
Cleaning the cache and restarting Krypton doesn't help.
Any help will be very appreciated since this problem keeps around for a while and i'm not the only one.
I can't remember of any lack of supported HW requirements regarding Huawei Mate 7 on Krypton like HW acceleration or anything ??
Thanks in advance

With my phone it happened when I tried to move the user folder to the external sdcard.
Finally I switched to the spmc http://spmc.semperpax.com/ and no more issues. Unfortunately is the previous version, but is working ok.

Thanks for the answer.
Kodi Jarvis also works perfectly but the problems occurs on v17 - Krypton.
Nobody had the issue on Mate 7 with Kodi 17 Krypton ?
Does even anybody use Krypton on Mate 7 ?
Cheers

I have the same problem any fix ??

Still no luck with chromecast in 5.0 ?

I've seen similar problem on older OOS,
i recently tried mine ( Stock 5,0 + Magisk only ), it always failed.. "casting to 'xxxx' has ended.
even my older xperia sp can cast without lag whatsoever.
Anyone here have similar problem ? any workarounds ?
P.S : chromecast 2.0, tried both method, with google's Home App, or directly by going to Settings-Display-Cast.
Thanks.

Same problem with my Smart TV. Screen mirror is not working since Android Oreo (OxygenOS 5.0.0 or 5.0.1) [emoji24]
Enviado desde mi ONEPLUS A3000 mediante Tapatalk

Hm... I haven't experienced any issues with Chromecast on OOS 5.0. Or any OS version for that matter.

just an update.. casting works fine now,
updated to 5.0.1, tried casting right away.. voila, it works.
i just remembered that i use wifi bonding from magisk on 5.0.0, it might be the problem.

Internet is very slow on LineageOS (latest build) on xiaomi mi 3w

Hello guys, today I just clean flashed the latest lineageOS build for my xiaomi mi 3, But when I was in MIUI 9, My internet speed was normal, but after I flashed the latest LineageOS, My internet speed suddenly became slow but I can connect to the internet. It's just too slow for my device when i flashed the rom. Is the rom the problem or is it our internet/router?

Wilhelmalex726 said:
Hello guys, today I just clean flashed the latest lineageOS build for my xiaomi mi 3, But when I was in MIUI 9, My internet speed was normal, but after I flashed the latest LineageOS, My internet speed suddenly became slow but I can connect to the internet. It's just too slow for my device when i flashed the rom. Is the rom the problem or is it our internet/router?
Click to expand...
Click to collapse
from location in settings diasble location and wifi scannig.
It's an option in 3 dots

That's for wifi , but for mobile network it has become very slow
The ping is high too

I guess this thread is outdated as hell, but AFAIK you should be able to fix it by changing "Preferred network type" in Cellural network settings -> Advanced (at least it helped on my Xiaomi Redmi Note 5).
I should be changed to best you got available.

VPN issue on Honor 4X

Hi,
I have a Honor 4X phone (Ch2-L11) with Android 6.
I installed latest Windscribe VPN from App Store but it won't work at all. everytime I try to connect app being crached. I almost certain that it's because original ROM but I'm here to ask anybody have same issue or not? I add this app to Protected App list but it does not help at all!
same VPN version app works fine on another phone with Android 5!
There is any custom ROM with Android 8.1 Go Edition or even 7 but non-EMUI for this phone?
Any help appreciated

hi again!
the issue has been fixed with latest windscribe updates.

[BUG] [Treble] WiFi disconnects 2 Minutes after locking screen

Hello, i installed Lineage OS based on Android 12.1 and 13 (A/B, vanilla, noSU).
Andy Yan's personal builds // GSI - Browse /lineage-20-td at SourceForge.net
sourceforge.net
In Both versions the WiFi disconnects 2 Minutes after locking the screen.
I looked into the logcat and found out it is an IPv6 bug. Disabling Ipv6 in the WiFi Router fixed the problem. Another workaround is to disable IPv6 over ADB.
The Problem is, some services rely on IPv6 which is why i dont want to disable it in the router. The ADB Workaround is just temporary, since it enabled again after a reconnection. This Bug is present for many years and different devices.
The LineageOS build are based on the TrebleDroid GSIs. This problem is also present in the TrebleDroid GSIs. Not a specific LineageOS problem.
altairfr-huawei - Browse /TrebleDroid-GSI at SourceForge.net
sourceforge.net
Does someone know a fix or workaround for this? Maybe a dev was dealing with this problem in the past and knows what needs to be done. I would really like to use Lineage OS 20 since it works pretty well and to get rid of google and huawei services. And of course latest security patches. But the permanently disconnecting WiFi is a dealbreaker. If not, the only option for me is going back to stock rom and debloat it via adb.

How did you install A11 and A12 on P10 when they have builds only for A/B devices from Android 12.
So last builds supporting from them should be LOS 18.1

MIcHiJK said:
Hello, i installed Lineage OS based on Android 12.1 and 13 (A/B, vanilla, noSU).
Andy Yan's personal builds // GSI - Browse /lineage-20-td at SourceForge.net
sourceforge.net
In Both versions the WiFi disconnects 2 Minutes after locking the screen.
I looked into the logcat and found out it is an IPv6 bug. Disabling Ipv6 in the WiFi Router fixed the problem. Another workaround is to disable IPv6 over ADB.
The Problem is, some services rely on IPv6 which is why i dont want to disable it in the router. The ADB Workaround is just temporary, since it enabled again after a reconnection. This Bug is present for many years and different devices.
The LineageOS build are based on the TrebleDroid GSIs. This problem is also present in the TrebleDroid GSIs. Not a specific LineageOS problem.
altairfr-huawei - Browse /TrebleDroid-GSI at SourceForge.net
sourceforge.net
Does someone know a fix or workaround for this? Maybe a dev was dealing with this problem in the past and knows what needs to be done. I would really like to use Lineage OS 20 since it works pretty well and to get rid of google and huawei services. And of course latest security patches. But the permanently disconnecting WiFi is a dealbreaker. If not, the only option for me is going back to stock rom and debloat it via adb.
Click to expand...
Click to collapse
i did not face such issue with wifi bug... in android 13 gsi on my huawei p10 running harmonyOS vendor.

anly11 said:
How did you install A11 and A12 on P10 when they have builds only for A/B devices from Android 12.
So last builds supporting from them should be LOS 18.1
Click to expand...
Click to collapse
p10 has SAR(A/B) it should boot fine on phh a12 and trebledroid a13 gsi

XDXDDX said:
i did not face such issue with wifi bug... in android 13 gsi on my huawei p10 running harmonyOS vendor.
Click to expand...
Click to collapse
Hello, thank you for the reply. I was on EMUI 9 or 9.1 i dont know exactly before installing a treble ROM. Can you give me some informations how to install the harmonyOS vendor?

in my case everything works fine on android a13 gsi even offline charging works too thanks to altairFR patches.

MIcHiJK said:
Hello, thank you for the reply. I was on EMUI 9 or 9.1 i dont know exactly before installing a treble ROM. Can you give me some informations how to install the harmonyOS vendor?
Click to expand...
Click to collapse
you need to rebrand it, go and find p10 oeminfo collection xda thread and there download the VTR-TL00 C01, its the only oeminfo that can rebrand to harmonyOS because the build number matches to current HarmonyOS selected. but i dont think its a good idea updating your device to harmonyOS because you will lose the functionality of booting to recovery using vol and power button, the procedure of flashing gsi in CN is also different compared to others, you need to factory reset first before flashing the gsi.

MIcHiJK said:
Hello, thank you for the reply. I was on EMUI 9 or 9.1 i dont know exactly before installing a treble ROM. Can you give me some informations how to install the harmonyOS vendor?
Click to expand...
Click to collapse
find me on telegram my username @pedrojvan, also emui 9.1 and harmonyOS have smaller system partiton size which you can only flash small vanilla gsi but thank goodness altairFR made an easy tool kit to repartition our huawei phones without any hastle or "risk". you can just download it on telegram also on sf, ig.