Related
Current Update:Feb 1st 2008 12:58AM
Wing for NOOBS like me.
All information in this thread was copied from other peopled, all I have done is put it in one place.. I will update this from time to time
DISCLAIMER:
I am in no way responsible the content listed below, most of this should work as the people of the community do help each other. Please be careful. And report any errors to me.
Adding Information, If you wish to add information to this post, please private message me it, I will add the info, please provide me a link to the data if you have it, and the original writer of said info, I will give the credit to the writing and the provider of said info.
please send it with the general area for it to go
ie: part 2:tweaks or part 4: random stuff.
so i can add it to the proper area fast, and if it doesnt fit into anything - i will add it to random stuff or new area. but we have the random stuff
Part 1: useful thread Post.
[*]Part 2: Random tweaks.
[*]Part 3: Rom’s Touch it/Open Touch Wing.
[*]Part 4: Random Info: random stuff that is unsorted
[*]Part 5: T-Mo Wing RUU for USA [the original tmobile install]
Updated on December 17 2007
Part 1: Useful Threads
Cab install for the Wing
The Following is from zcink @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=341867
Great Wing Info Thread
The following is from Nyer78 @ XDA
Original Thread @ http://forum.xda-developers.com/showthread.php?t=326655
General HTC Cabs
The Following is from patr!k @ XDA
Original thread @ http://forum.xda-developers.com/showthread.php?t=344533
All WM6 Roms
The following is from papamopps @ XDA
http://forum.xda-developers.com/showthread.php?t=358030
Part 2 tweaks.
The Following is from – Tater_Tot24 @ Howard forums
Original thread @ http://www.howardforums.com/showthread.php?t=1215155
Please Note that some of these entries only apply to the WING.
Add Side Button Functionality:
1. Using a registry editor go to HKLM\Software\Microsoft\Shell\Keys
2. In Keys, create a new Key named "40C7".
3. Copy the contents of 40C5 to to 40C7.
4. Edit the "Name" value replacing the "4" with a "5" (5 is Voice command button).
5. Close the registry editor.
6. In Settings\Buttons you should see the new "Button 5(Hold)" entry. If not, soft reset.
Note: I had to make voice command the hold function and screentoggle the non hold function for it to work correctly.
Camera Settings:
1. Open the camera, so you can see images thru the camera lens.
2. Go to bottom of screen & click on the "Y" at far left side.
3. Now move to the 4th icon at the bottom, and set the resolution on "L" and the quality on Super Fine (not Basic).
4. Move to the next icon on the right, and set the Capture Mode on either "Burst" or "Sports"
5. Next, click the icon at far left and set your Capture Speed to either Moderate or Fast, and "Snapshots" to at least 3.
6. Click on the next icon on the right and set it on Storage Card.
7. Finally, click the "Sun" and set the White Balance on Auto.
8. Click OK in the upper right, and you're almost set. Just go now to far left of camera screen and click either of the tiny > arrows until you come to 1/3 (or 1/5 or 1/7 or 1/10, depending on how you set "Snapshots.")
9. Now you're set to take some really great pictures. They will be sharp & clear all the way from about 12 inches to infinity.
10. For sharper pictures, leave the setting at 1x. Anything else is a "Zoom" shot.
Enhanced File System Performance:
Registry: HKLM\System\StorageManager\FATFS
Key: CacheSize (dWord)
Default: 0 (I am not sure what this equates to, the valid values I know about are 4096, 8192, 16384)
New Value: 8192
Hide SIM Contacts:
Registry: HKCU\ControlPanel\Phone
Key: ShowSim (dWord)
Default: 1 (show)
New Value: 0 (hide)
Active Sync Running in the Background Fix:
1. Create a “Fake Server”
Configure Server Menu Activesync Programs 2.Go to Start
3. In the following screens you can enter any old garbage. It does not matter, but just in case your unsure, just type the following in the indicated boxes:
4. Server Address: fake / User name: fake / Password: fake / Domain: fake. Then you are finished creating the fake server
5. Finally, UNCHECK the box in the time zones tab in the phone settings (This may sound silly, but it works! I promise!!)
MyFavs Missed Call Fix:
Registry: \HKLM\Security\Phone\NoLog
Key: List
Action: REMOVE
Hard Reset Instructions:
1. Hold down both of the “soft buttons”
2. Perform a soft reset with the stylus while still holding down the buttons
3. Push the green phone button to confirm that you do want to do a hard reset
DeBrand the Phone:
1. Perform a Hard Reset (instructions listed below)
2. Phone cycles through format, installs WM6, then prompts you to config touch screen
3. Install finishes and loads WM6
4. Then a prompt appears warning that EXT ROM will install extra contents (don't install! poke the soft reset button before EXT ROM install)
5. Hit soft reset button when EXT ROM prompt appears, you have 3 seconds!
6. Power on like normal
Send Large MMS:
Registry: HKLM\Software\Arcsoft\ArcSoft MMS UA\Config\UI\Size Limit
Key: wap2sendlimit1 (you can also change wap1sendlimit1)
Default: 307200
New Value: 1228800 (1200K)
Set the new value by going to Text/Multimedia --> Menu --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
MMS Sending Issue Fix:
1. Due to incorrect Port setting for the MMS server, the phone may not be able to send MMS messages all the time.
2. Go to Text/Multimedia --> Menue --> New --> MMS --> Menu --> Options --> MMS Options --> Servers --> T-mobile MMS
3. Make sure the settings are set to: Gateway: 216.155.165.50 / Port Number: 8080 / Server: http://216.155.174.84/servlets/mms
Remap Soft Buttons:
For Calendar
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Default
Default: Calendar
New Value: Internet (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\112
Key: Open
Default: HTCCalendar.exe
New Value: \Windows\iexplore.exe (again, anything you want goes here)
For Contacts
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Default
Default: Contacts
New Value: (anything you want goes here)
Registry: HKCU\Software\Microsoft\Today\Keys\113
Key: Open
Default: \Windows\RSK\Contacts.lnk
New Value: (again, anything you want goes here)
Remove / Modify Startup Sound:
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Enable (dWord)
Default: 1 (jingle on)
New Value: 0 (jingle off)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: Volume (dWord)
Default: 127
New Values: 16 - 200
You can also modify the sound and animation by changing the WAV and GIF files in these two keys.
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: WAVFile (SZ String Value)
Default: \Windows\T-Mobile startup.wav
New Value: (whatever you want)
Registry: HKLM\SOFTWARE\HTC\StartupAnimation
Key: GIFFile (SZ String Value)
Default: \Windows\TMO_Startup.gif
New Value: (whatever you want)
Remove the Tray Icon from Today Screen:
Registry: \HKLM\init\
Key: Launch92
Action: DELETE
Note: If you want to keep some but not all of the icons:
Registry: HKLM\Software\HTC\TrayApplet
There you'll find listings for each icon (the folders are for the WinWap, MyFaves, and CommManager tray icons). Remove the ones you don't want and soft reset. If you remove the music player settings, you will then have to uncheck the plug-in from Today items.
Adding Slide Sounds:
1. First you are going to need two .wav files.
2. Once you have the two sounds that you want to use, Rename them to Slider3_in.wav and Slider3_out.wav and place them in the \Windows Folder on your phone.
3. Go to the Registry: HKLM\Software\HTC\SlidingSound\.
4. Once your there you should see 3 Folders (keys) that are labeled 0-2, and 2 Dword Files (ActiveSlidingSound and SlidingSoundEffect).
5. In that same directory, you need to make a new folder (key) and label it "3". Once that is made, you need to go inside that "3" which should be empty and have nothing inside.
6. Now you need to make a new String.Label the String "in" without quotes, and then set the string to "Slider3_in.wav". Now you should have one string inside folder (key) 3.
7. Now you need to make another String inside of folder (key) 3. Just follow step 5, but instead of using "in" use "out". So it should be labeled "out" and should be set to "Slider3_out.wav".
8. Next, create another String inside of folder and call it “Default” (no quotes). Now set that sting to whatever you want the new schema to be called (i.e. wind chimes, customer, etc).
9. Now head back to the registry: HKLM\Software\HTC\SlidingSound\, where you should now see folders (keys) 0-3 now and two Dwords files.
10. Now change Dword ActiveSlidingSound to 3, which is the new sound you created.
Disable the SMS Sent notification
Regisrty: HKLM\Software\Microsoft\Inbox\Settings\
Key: SMSNoSentMs (decimal)
Default: 0 (on)
New Value: 1 (off)
Note: Please note that the 'Settings' key may not exist in your device, and thus may have to be created first.
Storage Card Settings:
Mail Attachments
1. Go to Text/Multimedia --> Menu --> Tools --> Options --> Storage
2. Then check the box!
IE Storage
Registry: HKCU\Software\Microsoft\Windows\CurrentVersion\Exp lorer\Shell Folders
Key: Cache (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\Temporary Internet Files
Key: Cookies (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\Cookies
part 2a
Key: History (string)
Default: Program Memory
My Value: \Storage Card\Internet Files\History
Note: Please see the “camera settings” to store pictures and video to the storage card.
Video from Portrait to Landscape:
Registry: HKLM\System\GDI\
Add key "Rotation"
Add Dword "LandscapeMode"=0
Move / Remove Startup Files:
1. make directory "\Windows\StartUpDisabled"
2. If you don't use MyFav5 Plan then copy "\Windows\StartUp\My5MsgCenter.lnk" to "\Windows\StartUpDisabled\My5MsgCenter.lnk"
3. If you don't use Voice Commands often (you can still manually start app) then copy "\Windows\StartUp\Voice Command.lnk" to "\Windows\StartUpDisabled\Voice Command.lnk"
Remove Services:
4. Go to "HKEY_LOCAL_MACHINE\Services"
5. If you don't use MyFav5 Plan (SMSCSend links to my5client.dll, I don't have My Fav plan, so I don't need this service)
a) save SMSCSend reg export somewhere for backup
b) delete "HKEY_LOCAL_MACHINE\Services\SMSCSend" from registry
6. Go to "HKEY_LOCAL_MACHINE\Services"
7. If you don't use Windows Live
a) save Windows Live reg export somewhere for backup
. b) delete "HKEY_LOCAL_MACHINE\Services\Windows Live" from registry
Other Services:
Other Services
"HKEY_LOCAL_MACHINE\Services\BTHIDSVC"
loads the Bluetooth Human Interface Device drivers and service
"HKEY_LOCAL_MACHINE\Services\BTAGSVC"
loads the Bluetooth Audio Gateway drivers and service
"HKEY_LOCAL_MACHINE\Services\BthAsPlugin"
loads Active Sync over BlueTooth service
"HKEY_LOCAL_MACHINE\Services\Trusted"
loads WSP Push, Push Router, SIM tool kit, SIM Init
"HKEY_LOCAL_MACHINE\Services\OBEX"
object exchange - protocol for data exchange between devices or syncing
"HKEY_LOCAL_MACHINE\Services\NOTIFY"
pop up notifications for events
"HKEY_LOCAL_MACHINE\Services\credsvc"
Credentials Manager
"HKEY_LOCAL_MACHINE\Services\CERTENROLL"
performs enrollment and renewal of certificates
"HKEY_LOCAL_MACHINE\Services\WirelessService"
Wireless Monitor Service
Increase voiceVolume:
Regisrty: HKCU\Control Panel\SoundCategories\InCall
Key: AttenuationCategory
Default: 2
New Value: 1
Regisrty: HKCU\Control Panel\SoundCategories\InCall
Key: InitVol
Default: 3
New Value: 10
Increase Voice Command Volume:
Registry: HKCU\Control Panel\SoundCategories\VoiceCommand1
Key: AttenuationCategory
Default: 3
New Value: 1
Registry: HKCU\Control Panel\SoundCategories\VoiceCommand1
Key: InitVol
Default: 5
New Value: 20
Better sound over A2DP
Registry: HKLM\Software\Microsoft\Bluetooth \A2DP\Settings
Key: MaxSupportedBitPool
Default: 30
New Value: 58
Registry: HKLM\Software\Microsoft\Bluetooth \A2DP\Settings
Key: BitPool
Default: 30
New Value: 58
Note: If not good enough, then delete: "MaxSupportedBitPool"=XXX &
"BitPool"=XXX.
Unlocks & Unhide the Extended Rom in Explorer:
Registry: HKLM\System\StorageManager\AutoLoad\TRUEFFS_DOC1
Key: bootphase
Default: 1
New Value: 2
Registry: HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1
Key: mounthidden
Default: 1
New Value: 0
Registry: HKLM\System\StorageManager\Profiles\TRUEFFS_DOC1
Key: folder
Default: ?
New Value: Extended_ROM
GMail Settings:
You can access your Gmail messages from the Wing in three ways:
Set up Gmail as a POP3 account
Automatically forward Gmail
Access Gmail from the Internet
Set up Gmail as a POP3 Account
1. Log in to your Gmail account from your PC.
2. Select Settings at the top of any Gmail page.
3. Select the Forwarding and POP tab in the orange Mail Settings box.
4. Under POP Download, choose to Enable POP for all mail or Enable POP only for mail that arrives from now on.
5. Specify whether you want Gmail to keep a copy of messages in the Inbox when you access messages through POP.
6. Select Save Changes.
I. Auto-configure Gmail from your Pocket PC phone
1. Press Start --> Messaging.
2. Select New Email Account.
3. Enter your e-mail address and make sure the box is checked for getting the settings automatically
4. In the Auto configuration screen, wait until the Status changes from Connecting to Completed and then select Next.
5. Enter your name, user name, and password (DO NOT REMOVE the recent: from in front of the username that it automatically provides) and select Next.
6. Ensure Account type is set to POP3 and select Next.
7. Make sure that Incoming Mail is set to pop.gmail.com:995
8. Make sure that Outgoing Mail is set to smtp.gmail.com:465 and select Finish.
9. Select Yes to confirm that you would like to download mail for this new account now.
II. Automatically Forward Gmail to Another Account
1. Log in to your Gmail account from your PC.
2. Select Settings at the top of any Gmail page
3. Select Forwarding and POP in the orange Mail Settings box.
4. Select Forward a copy of incoming mail and enter the e-mail address to which you'd like your e-mail forwarded.
Now your Gmail will automatically be forwarded to this account.
III. Access Gmail from the Internet
If you don't subscribe to an unlimited data plan or need only occasional access to your Gmail account you may prefer to access your Gmail from your Pocket PC phone using Internet Explorer. To access your account through Internet Explorer, go to http://m.gmail.com.
alternate Gmail Settings
IMAP4 style
provided from Google!
http://mail.google.com/support/bin/answer.py?answer=78886&topic=12814
Part 3 Roms
Part 3 Roms...
Touch it and Open Touch are the popular Roms
as well as CleanROM
The roms are basicly rebuilds of the operationg system on the phone, and whats preinstalled. These roms are much faster and have more prog mem then the stock rom.
All WM6 Roms
The following is from papamopps @ XDA
http://forum.xda-developers.com/showthread.php?t=358030
Keyboard Fix For Roms
Thanks to duprade
http://forum.xda-developers.com/showthread.php?t=359696
I will not give advice to which is better. Use em and figure that out on your own
Part 4: Random Stuff
Part 4 : Random Stuff
Wing as a Webcam
Found at XDA
http://forum.xda-developers.com/showthread.php?t=348187&highlight=WING+AS+A+WEBCAM
Modifying and/or Removing Tray Icons
Remove the Tray Icon from Today Screen:
Registry: \HKLM\init\
Key: Launch92
Action: DELETE
Note: If you want to keep some but not all of the icons:
Registry: HKLM\Software\HTC\TrayApplet
There you'll find listings for each icon (the folders are for the WinWap, MyFaves, and CommManager tray icons). Remove the ones you don't want and soft reset. If you remove the music player settings, you will then have to uncheck the plug-in from Today items.
Part 5: T-mo Wing RUU - USA
Part 5 : T-mo Wing RUU - USA
From At XDA xavier6303
Found http://forum.xda-developers.com/showthread.php?t=321717
This will reset your phone, basically reinstall windows and all the phone, heard it works as a decent unbricker,
How to enter boot mode
Restart the phone and hold the voice and camera button
Please don´t post in this thread. All important things are mentioned. If something is missing please PM nyitalian - so he can isnert.
After all is in - the thread will be closed.
Thanks for this great thread!!!
updated with IMAP4 settings for gmail account connection
Feb 1st 2008
This is what many touch pro/fuze owners want to have - ability to get full control over their keyboards.
This is for Raphael only! Do not try to install this on other devices!
Do not ask me to make a version for other device since my remappers are driver dependent and this can be very and very complicated without real device (if possible at all).
So, what is it ? It's a modified keyboard driver with configurator application for keys setup. Any key (yeah, i mean ANY, including Home and Back keys) can be reassigned to perform desired actions. Keys on a QWERTY keyboard are not an exception, they might be remapped too.
If any key has an action configured and is defined to be processed by my driver extension, it wouldn't go into the system. That is to say no one program even like AEButton will see key events processed by my driver.
Driver extension also can vibrate on any key press.
Modified drivers were tested on many ROMs based on different OEMs, so they would work in most cases.
Thanks dcd1182 for CDMA version testing.
Features:
Different event types supported: single, double and triple clicks, long presses
Two modes of key mapping: three actions per key or direct key mapping
Key repeats in direct key mapping mode
Actions sequence repeats in actions mode
Key combinations using FN modifier
Default key behaviour action - you won't loose key's default behaviour if you just want to add double click or long press to it
Different key behaviour depending on foreground process/window class/window text
Multiple rules for each key to provide different behaviour for each application you want
Multiple actions for each event
Different predefined actions:
Run program
Key press emulation
Send symbol/text to active window
Close active window
Switch to window by class/text
Terminate data connection
Wi-Fi toggle
BT toggle
Screen rotation
Power management (screen power toggle, suspend, reset)
Exceptions lists which are used to deny key remapping depending on foreground process/window class/window text
Configurable long press and double click duration
Configuration import/export in configurator
Changelog is located here.
Configurator UI localization support information is located here.
Requirements:
- .NET CF 2.0 (for configurator app)
- WM 6.1/6.5 compatible
Usage:
- Install SdkCerts.cab
- Install RaphKbdControl_XXX.cab
- Soft reset
- Check if keyboard works by pressing hardware buttons and seeing if they do their work, if not - uninstall cab, this wouldn't work on your current ROM
- If it works - go to the control panel and find "Keyboard Config" on a System page
How to define key processing:
- Run configurator (Control Panel -> System -> Keyboard Config)
- Press Menu -> Add key
- When dialog asking you to press key appears press and release desired key
- Set up needed options in key setup dialog and press OK (left softkey)
- In configurator's main window press left softkey "Update settings" to let new configuration take place (reboot is not needed, coz new settings will work immediately after saving)
What to do if keyboard doesn't work after uninstallation of this software:
- in any way stop device "KBD1:"
- for example, you can use Dotfred's TaskManager - navigate to Devices tab and find the KBD1: string, then press Stop
- delete files \Windows\keypad.dll and \Windows\kbdcntrl.dll
- soft reset
How to add new button to Buttons applet and get it working:
- add or copy existing key [HKLM\Software\Microsoft\Shell\Keys\40CX], where X is 1-6
- under this key add next values:
* Name - display name of the button in list (doesn't matter what you write here, it's only for you)
* Icon - path to icon for this button
- goto configurator and define an 'emulate key press' action for any button you want and set these values here: key code - 'App X' and check 'Win' checkbox - only in this case button will work
- save settings and enjoy newly created button
TODO:
- optimization
- Shift+?? key combinations support (if there would be requests on this)
- more actions
- other useful things
- your suggestions ?
Backup before installing of modified driver is strongly recommended.
Be careful when downloading the cab, make sure you choose the correct version suitable for your device.
Also, here is small collection of AltTab programs attached.
You can use any of them assigned as 'run program' action to desired key to switch between running programs.
well im going to try this right now, thanks
tested and works great.
side note: under the todo list adding different key behaviours depending on active window would be great
thanks
Push!
What a great app ! Couold you try to add something like multi-pressd ?
Glad to see something like this come along.
Curious, any plans to integrate with the Buttons applet found in Settings?
Cheers,
Again, excellent work!
luciusz said:
Couold you try to add something like multi-pressd ?
Click to expand...
Click to collapse
Do you mean key combinations ? I will think about it.
hilaireg said:
Curious, any plans to integrate with the Buttons applet found in Settings?
Click to expand...
Click to collapse
No. Although buttons applet and my extension do similar work, they work in different ways, so it's not possible to integrate them at this moment.
It is very cool program.
But it is not work with russian keyboard on official Rom
Or it's my mistake?
after uninstall app and soft reset do not work hardware keyboard,
and keys: on/off device (on the top side) and loudness (on left side)
What can I do?
Cool tool!!! If you implement to configure different behaviour for different programs that would be really nice!
Wow; this really does sound like the tool I was hoping for. (The hardware keyboard and the home/back etc keys? Perfect!)
Sadly, seems like the rom I am using (MightyROM5, for CDMA and Sprint) wasn't one of them... oh, well. If anyone else with CDMA has a ROM and tries this successfully, though, I'd love to know so I can try a different one.
For me, the hardware keys worked again after an uninstall and soft reset. (To turn the screen back on after it fell asleep while I was doing this, I had to hold the power key down as if I was going to force it to turn off, only longer than normal -- just a FYI if someone else has the same issue.)
ldrn said:
Sadly, seems like the rom I am using (MightyROM5, for CDMA and Sprint) wasn't one of them... oh, well.
Click to expand...
Click to collapse
Could you send me keypad.dll (hope CDMA version has the same name as for GSM) file from your ROM ?
is there a way to make a tab key ? i really would like one . i hate having to touch the screen to change entry feilds on the internet ,usually when i log into xda or myspace or anywhere that has a forums ..... i use it tons on my computer and thats pretty much my only complaint about the fuze keyboard ...NO TAB !
tarkim said:
Could you send me keypad.dll (hope CDMA version has the same name as for GSM) file from your ROM ?
Click to expand...
Click to collapse
This is the keypad.dll from MightyRom 4.16 (CDMA):
Two requests:
1.
Please let me execute .lnk files also, not only .exe files
2.
I cannot use arguments when calling exe files. Please support arguments when calling exe files in the next version.
Thanks for listening!
Oliver
gmanfuzing said:
is there a way to make a tab key ? i really would like one . ....
Click to expand...
Click to collapse
owilsky said:
Two requests:
1. Please let me execute .lnk files also, not only .exe files
2. I cannot use arguments when calling exe files. Please support arguments when calling exe files in the next version.
Click to expand...
Click to collapse
All these would be implemented in new version which I'm currently working on. Wait a few days and you'll get it
mcw
tnx for driver, will se what I can do
Nice!
Will this app let me remap the Volume Up/Down to Scroll Up/Down?
tarkim said:
mcw
tnx for driver, will se what I can do
Click to expand...
Click to collapse
Wow, thank you for taking a look at this! (And thanks Mcw for posting it.)
kusbainian said:
Will this app let me remap the Volume Up/Down to Scroll Up/Down?
Click to expand...
Click to collapse
yes
ldrn
i've analyzed CDMA keypad driver that mcw posted here, it's 90% similar to GSM version
i will patch it in a free time like my one, but i haven't a CDMA device to test it so you will need to test patched driver
Amazing app, exactly what I dream about, thanks!
I would also like to propose some more functions than just running app with keypress, like for example closing window, closing app, opening start menu, etc...
And, if anybody knows standalone symbols keypad replacement, with your superb program we can get rid of this problem: http://forum.xda-developers.com/showthread.php?p=3911050
I have an issue with this app, dunno why but only my storage card is available to search exe from, I'm unable to search exe from main memory, how comes?
Thanks
Is there a way to change the default (onscreen) keyboard
I know you can go to
Settings > Personal > Input . Input Method > ....
and change it there.. but mine always defaults back to the normal keypad every time..
Yet i would like it to either be "full qwerty" or "phonepad"
is there a registry change maybe?
Thanks
If you have SK-tools, you can change the default keyboard to any built-in or 3rd party keyboard you want.
You don't even have to buy it, it works even on trial.
there is also a tiny free program called sip change
which change the default input device
phonepad is default on my x1
ahh, i do have sktools.. but where do i find the SIP changer option? there are practically thousands of different options to wade through with that programme..
would be easier to have a registry change though
Try this, it works.
http://forum.xda-developers.com/showthread.php?t=271008
sipchange works, but sometimes it's a pain to get the right amount of delay.
sktools are the more "elegant" solution, change it once and it stays that way.
category "maintenance" -> input methods -> tab & hold on the keyb you wish to make default -> "set as default"
sktools will ask if you're really sure etc... then do a restart.
thanks guys
hello
I want to add volume buttons on navigation bar for my handy daughter.
for ex:
volume (-) on left
classic navbar buttons (on center)
volume (+) on right
(She have a Teclast T30 with Android 9)
I try custom navigation bar app but it have some issues (buttons disappearing when rotate)
I try systemui tuner but no navigation bar entries
So for now, i want to try with tasker but i'm a noob
Can somebody help me to create this profil ?
thx for all
Nobody to help me ?
Let me start by saying that if you have zero experience with Tasker, please help yourself by working through some beginner tutorials found in excess online.
You will need to decide what type of profile should trigger the task containing the following actions. Maybe when specific apps are launched (video, music, ...). Or maybe you want them displayed always which means an "on boot" event. Or something else
This is straightforward using the built in "settings -> custom setting" action. If the device is not rooted, you will need to give write secure settings permissions to tasker through ADB.
Reference the "Using Shell Commands" section (scroll down pretty far) of How to Add Left/Right Keyboard Cursors to the Nav Bar during Text Input post.
It's very similar except instead of using the keycodes for left and right cursor movement (21, 22), we're using the keycodes for volume up and volume down (24,25).
We are also using volume up/down icons instead of left/right. The link to the website to get the icons is on that same page, in the same section. The links to the pages containing the 64x64 icons I used are: Volume Up and Volume Down.
And most importantly, instead of using a run shell command action, we're taking advantage of the relatively new custom setting action. As described above, you don't need a rooted device for this as long as you give the permissions through ADB.
I created a folder under the Tasker folder called "NavIcons" to hold icons for tasks like this. You may need to try different icon sizes to find a size that suits your device.
There is a nice summary of keycodes here.
add volume +/- buttons
Code:
A1: Custom Setting [
Type: Secure
Name: sysui_nav_bar
Value: key(25:file:///storage/emulated/0/Tasker/NavIcons/volume-down-64.png),back;home;key(24:file:///storage/emulated/0/Tasker/NavIcons/volume-up-64.png)
Use Root: Off
Read Setting To:
remove volume +/- buttons (without recent button)
Code:
A1: Custom Setting [
Type: Secure
Name:sysui_nav_bar
Value: space,back;home;menu_ime
Use Root: Off
Read Setting To:
remove volume +/- buttons (with recent button)
Code:
A1: Custom Setting [
Type: Secure
Name: sysui_nav_bar
Value: space,back;home;recent,menu_ime
Use Root: Off
Read Setting To:
Thanks for all !!
I understood how to and it work !
I launch this task on event "home launcher" because on "on start" don't work
Many thx !!
Hi,
This guide will show you how to remap your Spen/Stylus Bluetooth button + Hover action + button press while hovering the screen to any action/app/task you want.
This guide will only show beginners guide. Further per app action configuration is not shown. It is DIY but if you want to share your configuration, you are welcome here.
Requirements (will not work without these) :
1. Samsung OneUI Based Roms (Sure will not work on lineage)
2. Spen/Stylus with Bluetooth capabilities (Knock offs will not work)
3. Spen/Stylus paired to your phone and Air actions enabled
4. Tasker Latest Beta (As its Tasker guide)
5. Note 9 (Oneui 2.0/2.1)
My Configuration:
Device: N960F Exynos
Rooted: Yes
How to:
1. Import Tasker projects from link below (Extremely Beginner Friendly)
Links:
Download
Steps:
Download above file
Import to Tasker
Enable it and Then detach spen to use it
Change Task or Try it out first
OR
2. DIY and Other methods of hover/Single press while hover will be soon posted.
Troubleshoot:
• Remap does not work:
1. Check requirements again
2. Make sure Tasker is not disabled/Profile is not disabled
3. Make sure necessary permissions are given to Tasker already.
4. You will need to check point 2 in How to guide above and find button clicks for your device if they are different and replace above with your ones.
• Other actions also initiates/duplicate actions:
1. If long press is defined in Settings > Spen > Air Actions then assign it to Tasker secondary app and detach Spen > long press > popup comes about secondary app > disable it
2. Disable per app actions in Settings > Spen > Air Actions
3. Turn off Air command if you want button pressed while hovering remap
4. If you want to disable customisation while in particular app, in tasker profile like in above project Single Click -> long press on current context -> add context -> application -> select applications and tick invert box at bottom -> press back (Example already added in the project file)
Further DIY:
1. Per app configuration
2. Initiate multiple actions/shortcuts/activities
3. Create an app out of it (However Tasker is superior with many options)
Tags:
Ble Stylus Spen note note9 note10 capacitive remote air action airaction
2. Spen/Stylus with Bluetooth capabilities (Knock offs will not work)
what does it mean?
and please share tasker download link
amirfrkhi said:
2. Spen/Stylus with Bluetooth capabilities (Knock offs will not work)
what does it mean?
and please share tasker download link
Click to expand...
Click to collapse
Counterfeit Spen will not work that do not possess bluetooth capabilities.
Tasker Link: Download
Error
when i import it said error. contain bad data
amirfrkhi said:
when i import it said error. contain bad data
Click to expand...
Click to collapse
Which tasker version you are using? I reinstalled tasker just for you and used same file and imported it with no problems. Are you importing as project or 3 dots->data->restore? It should not fail.
Reattaching file for you to this reply. Extract it and import. Hope it works.