hello
i have juste install the miui rom 7.1.19 and i try many time for install trwp but all time i brick my phone , i search a trwp for this rom but i dont found , the trwp for this rom it s possible to found ???
Use twrp test 3 and it'll work
there is a modified version available in the miui forum
and this is the official website of the TWRPs guys and gals: https://twrp.me/devices/xiaomimi5.html
Install this zcx twrp recovery
*OTA incremental update support package
http://en.miui.com/thread-364569-1-1.html
shabtab said:
Use twrp test 3 and it'll work
Click to expand...
Click to collapse
Link for TWRP?
verma.avesh said:
Link for TWRP?
Click to expand...
Click to collapse
https://mega.nz/#!n5YkFBCb!T9JovjU8RdMlJVEZHbEovygN0zeIoPrPyWSYnvRShzw
Link is here https://dl.twrp.me/mako/
I had no part in creating this just sharing the good news
multirom update twrp thanks
Hi Folks...
Got me an Samsumg Galaxy S3 GT-I9305.
I tried to install RR, so first step obviously was getting TWRP 3.2.1-0-i9305.img.tar.
Downloaded over at https://dl.twrp.me/i9305 the said version.
Installed with Odin V3 and everything came up clear but when i tried to boot into recovery i got stuck in Bootlogo
Playing around for a while i decided to install TWRP 3.0.2-1 which worked fine on first try.
Tried to flash the 3.2.1-0-i9305.img via TWRP gave me the error message "File is too big".
Can anyone confirm?
That version is too big for the recovery partition on our device.. Need someone to compress it to make it smaller to fit the partition size of the device.
I have the same problem with the last version TWRP 3.2.1.0.
When I push this one with Odin 3.12, all is sucess but when i reboot the device in custom recovery, it can't, it is stuck
S3 GT-I9305 Specific?
Lexington67 said:
Hi Folks...
Got me an Samsumg Galaxy S3 GT-I9305.
I tried to install RR, so first step obviously was getting TWRP 3.2.1-0-i9305.img.tar...
Click to expand...
Click to collapse
TWRP 3.2.1-0 works great on my S3 i9300, flashed from the external SD card so could you please edit your thread title and add: S3 GT-I9305?
Thanks!
curiousrom said:
TWRP 3.2.1-0 works great on my S3 i9300, flashed from the external SD card so could you please edit your thread title and add: S3 GT-I9305?
Thanks!
Click to expand...
Click to collapse
This thread is in the gt-i9305 help n troubleshooting section btw.. So there's nothing to edit. Correct me if im wrong.
Lexington67 said:
Can anyone confirm?
Click to expand...
Click to collapse
Confirmed also. Unable to use 3.2.1-0 for install/upgrade.
3.0.2-1 works fine, https://dl.twrp.me/i9305/twrp-3.0.2-1-i9305.img.html
Working 3.2.1-0 credit goes to @Option58 the one who compress it. Thank him. Enjoy guys.
https://androidfilehost.com/?fid=817906626617954564
Official TWRP 3.2.1-0 for i9305 Problem Reported to TeamWin TWRP
@Lexington67 @public3n3my @GouLt @mouth
I reported the problem to the TeamWin TWRP so other S3 i9305 users don't waste their time with this version:
Hello, several XDA i9305 users report here
that version TWRP 3.2.1-0 returns error: "File is too big".
https://forum.xda-developers.com/galaxy-s3/help-i9305/twrp-3-2-1-0-t3720311/
https://dl.twrp.me/i9305/
Click to expand...
Click to collapse
And they promptly replied:
Thanks for the report. I have removed it from the download section of twrp.me and disabled future builds until someone can fix the issue.
Click to expand...
Click to collapse
Awesome support from a non-profit open source community project IMO.
***
I'm working on my own TWRP device tree, based on official LineageOS repos, with the intention of getting official support for version 3.2.1-0. I'll create my own thread when my build is ready. According to TWRP's official page for the i9305, there is no current official maintainer.
Edit: I compiled a 3.2.1-0 build and created a separate thread: https://forum.xda-developers.com/galaxy-s3/development-i9305/recovery-twrp-3-2-1-0-t3741413
plz can anyone give me the link to download redwolf twrp recovery img with ota support for redmi 4x?
ivansahajay said:
plz can anyone give me the link to download redwolf twrp recovery img with ota support for redmi 4x?
Click to expand...
Click to collapse
First move this thread to qna section.
ivansahajay said:
plz can anyone give me the link to download redwolf twrp recovery img with ota support for redmi 4x?
Click to expand...
Click to collapse
And please after that search in Rom, kernel & other Section..
Get the latest Red-Wolf Recovery installation and review watch the video
Welcome to the new thread of twrp flashable stock Android One for Mi A1
There will be only stable TWRP flashable builds of stock with no modifications.
All these builds of mine contain everything which a fastboot ROM does, so it's a complete replacement.
How to install
1. Reboot to TWRP (CosmicDan TWRP is recommended)
2. Wipe system, data, dalvik and cache. (if coming from a custom rom) (you may skip if coming from stock)
3. Install the ROM file.
4. Reflash TWRP installer (if you want to have TWRP installed in your phone later).
5. Install Magisk (if you want to have root).
6. Reboot to system.
Additional Notes/Credits
Original credits go to Xiaomi and Google.
Downloads
Latest:
Stock 9.0 [V10.0.14.0] TWRP - October 2019
Old Downloads:
Stock 8.1.0 [V9.6.7.0.ODHMIFE][October 2018 Security Patch]
Stock 8.1.0 [V9.6.8.0.ODHMIFE][November 2018 Security Patch]
Stock Pie Beta [V10.0.2.0] TWRP Zip
Stock Pie Stable [V10.0.3.0] TWRP Zip
XDA:DevDB Information
Stock Android One, ROM for the Xiaomi Mi A1
Contributors
talayy
ROM OS Version: 9.0 Pie
ROM Firmware Required: TWRP 3.2.X.X
Version Information
Status: Stable
Current Stable Version: 10.0.14.0
Created 2018-10-20
Last Updated 2019-10-29
Nice
Keep this up to date ?
Great job! Do continue to update this thread!
talayy said:
Welcome to the new thread of twrp flashable Stock 8.1.0.
There will be only stable builds of stock 8.1.0 with no modifications.
How to install
1. Reboot to TWRP
2. Wipe system, data, dalvik and cache. (if coming from a custom rom) (you may skip if coming from stock)
3. Install the ROM.
4. Reflash TWRP installer (if you want to have TWRP installed in your phone later).
5. Install Magisk 17.x (if you want to have root).
6. Reboot to system.
Additional Notes/Credits
Special thanks to Tadi for providing me payload OTA link. Moreover, additional credits go to Xiaomi and Google.
Downloads
Stock 8.1.0 [V9.6.7.0.ODHMIFE][October Patch]
XDA:DevDB Information
Stock 8.1.0, ROM for the Xiaomi Mi A1
Contributors
talayy
ROM OS Version: 8.x Oreo
ROM Firmware Required: TWRP 3.2.x.x
Version Information
Status: Stable
Current Stable Version: V9.6.7.0.ODHMIFE
Created 2018-10-20
Last Updated 2018-10-20
Click to expand...
Click to collapse
Hey, can you share how you get the full source? like from MI official site or from Google directly? Do you mind sharing how you able to find the direct link to the full stock ROM of October security patch for Xiaomi A1 global?
I can't find it in official MI and I like to "Take bug report" to locate the OTA link that it tries to download and manually unpack the payload.bin, but Magisk seems can't patch the boot.img
myself379 said:
Hey, can you share how you get the full source? like from MI official site or from Google directly? Do you mind sharing how you able to find the direct link to the full stock ROM of October security patch for Xiaomi A1 global?
I can't find it in official MI and I like to "Take bug report" to locate the OTA link that it tries to download and manually unpack the payload.bin, but Magisk seems can't patch the boot.img
Click to expand...
Click to collapse
I just had payload file from official google OTAs which I decompiled using python codes and made a twrp flashable zip that just works well and yeah, I'll keep it up to date. You all will get TWRP flashable stock within a day of OTA release but only for stable versions.
talayy said:
I just had payload file from official google OTAs which I decompiled using python codes and made a twrp flashable zip that just works well and yeah, I'll keep it up to date. You all will get TWRP flashable stock within a day of OTA release but only for stable versions.
Click to expand...
Click to collapse
How did you get this files?
zurik said:
How did you get this files?
Click to expand...
Click to collapse
Search it up on Google, everything's there ?
I soo wanted to switch to stock....
And here u aree
---------- Post added at 04:26 PM ---------- Previous post was at 04:22 PM ----------
Something is wrong with the link not working
talayy said:
I just had payload file from official google OTAs which I decompiled using python codes and made a twrp flashable zip that just works well and yeah, I'll keep it up to date. You all will get TWRP flashable stock within a day of OTA release but only for stable versions.
Click to expand...
Click to collapse
I do get the payload.bin and able to extract the boot.img, but how you recompile into a full version? the payload.bin from Septemeber patch to October patch is 200 MB++ while the TWRP flashable stock you provided is 1.1GB, how you recompile it?
myself379 said:
I do get the payload.bin and able to extract the boot.img, but how you recompile into a full version? the payload.bin from Septemeber patch to October patch is 200 MB++ while the TWRP flashable stock you provided is 1.1GB, how you recompile it?
Click to expand...
Click to collapse
Payload bin from September to October is different from payload bin of October OTA as a full package. Also, I used kitchen + wrote updater script to flash it in A/B partition device (A1 in this case) using TWRP.
Too many people have downloaded the filee?
So you cannot access the file
Showing this on download page!!!
Yeah can you rehost this with another download link?
Downloading now!! thanks for this one bro. Plz always keep up-to-date this thread. And can u tell me which custom kernel should i use for better battery life with stock rom? any idea?
Please, uploud to another serwer - thanks!
Hey guys, I'm having major exams this week so I am not sure if I have any time to reupload. If someone has it downloaded, please mirror it for time being and I'll add it to OP.
What should i do to increase charging speed as charging speed on stock is pretty slow
Arnav1104 said:
What should i do to increase charging speed as charging speed on stock is pretty slow
Click to expand...
Click to collapse
It is fine for me. Same as in other roms. On a side note, if you want more than official then flash a custom kernel e.g moun/franco and manually increase it.
talayy said:
It is fine for me. Same as in other roms. On a side note, if you want more than official then flash a custom kernel e.g moun/franco and manually increase it.
Click to expand...
Click to collapse
Yaa i mean to say which custom kernel i should flash on stock rom to increase charging speed
Well, I'm able to download today. y'all should try again If not download from Mirror (MEGA)
https://mega.nz/#!kQoDEaoI!FjNk4bT0cVLq5Fj8e5IyPa0gkJM4SJfFqWyhN_J29TE