hey all, i believe i have a bricked rog 2, it wont turn on, but the pc still recognises it in device manager as a com connection. ive tried using qfil and downloading different firmware but always fail. is there a tool like the nubia one, or even the rog phone 3 one ive seen on here?
Try to fix with dr fone
You can try to attempt repair and if it's still not help then you can try to flash it
Related
Hi just got my new p970 from ebay delivered brand new from hong kong and was working fine for me vodafone but was on froyo so i wanted to update to ICS. i tried the official updater but all this did was made my fone unbootable! so i found this website, downloaded the smart flash tool and the KDZ file for uk. however now ICS is installed properly, but it doesnt recognise SIM card, no signal no contacts nothing! ive tried downloading a few older ones even version 2.3.4 which it was on before but again im not getting signal!
Any help am i using the wrong KDZ to get a p970 working for vodafone uk? or is there something else i can try to unlock it?
Any help much appreciated! been waiting for weeks to have a smartphone again and its allllll gone wrong :'(
also my phone seems to have no IEMI number being recognised...
You probably check "delete entire cp" in smart flash tool. I cant give you a link, but you should search for how to restore imei. I think your sim isnt recognized becsuse there is know imei
Sent from my LG-P970 using Tapatalk 2
here is the link:
http://forum.xda-developers.com/showthread.php?t=2137840
scroll down to the restore imei part
thanks i have been trying this method, but when ever i try and switch to CP the phone is gone from the COM port and fails to install the driver, and keeps making the noise as if its being pluged in and out.... ive read alot of people have had this problem. my computer is windows 7, im going to try at work on the XP computer tomorrow hopefully i can resolve this!
Ok so now tried on 3 computers, one iwth windows 7 one windows 8 and one XP. On all of them when i connect the phone to and switch to CP USB mode the phone constanly disconnects and re connects but the driver never installs. I have downloaded the driver from lg website and its detected fine in AP USB mode but i just cant get it recognised in CP USB so have no way of changing the IEMI!!!!!! this is soo fruistrating i dont know what else to try now any ideas?
Hello everyone,
One week after using my new M7, it is not switching on anymore but luckily my PC recognizes it as QHSUSB_DLOAD. I am trying to find it's RUU but I can't get the CID of the phone to download the suitable RUU.
I Googled the forum but I didn't manage to find anyway I can extract the CID of the phone. How can I get the CID when the phone is bricked and not switching on? Anyone can help me?
Thanks
Gamool said:
Hello everyone,
One week after using my new M7, it is not switching on anymore but luckily my PC recognizes it as QHSUSB_DLOAD.
Click to expand...
Click to collapse
Lucky? Not really. ..
QHSUSB_DLOAD can happen for 2 reasons
1. You have flashed something wrong (an incompatible firmware for example) and the phone went in QHSUSB_DLOAD mode. In this case you might be able to unbrick using the unbricking project.
2. If the phone went in QHSUSB_DLOAD mode itself (not directly after a bad flash) then its an hardware problem and will probably need a motherboard replacement.
alray said:
Lucky? Not really. ..
QHSUSB_DLOAD can happen for 2 reasons
1. You have flashed something wrong (an incompatible firmware for example) and the phone went in QHSUSB_DLOAD mode. In this case you might be able to unbrick using the unbricking project.
2. If the phone went in QHSUSB_DLOAD mode itself (not directly after a bad flash) then its an hardware problem and will probably need a motherboard replacement.
Click to expand...
Click to collapse
What exactly happened:
Bought the phone one week ago, unboxed the phone and received an update. After downloading the update the phone refused to install it and it gave some error message that the current software of the phone is modified and the phone cannot continue installing the downloaded new update.
Two days later, I was transferring some files from another phone to it using Wi-Fi direct via an app, the M7 freezes with no response to anything whatsoever, tried to restart the phone using the power button but it didn't switch on.
I can see that there is hope as long as the PC recognize it. Can you sort up my situation again? Thanks.
Gamool said:
What exactly happened:
Bought the phone one week ago, unboxed the phone and received an update. After downloading the update the phone refused to install it and it gave some error message that the current software of the phone is modified and the phone cannot continue installing the downloaded new update.
Click to expand...
Click to collapse
This happen when the phone CID or MID doesn't match the software version.
Two days later, I was transferring some files from another phone to it using Wi-Fi direct via an app, the M7 freezes with no response to anything whatsoever, tried to restart the phone using the power button but it didn't switch on.
Click to expand...
Click to collapse
If it froze and then rebooted in qhsusub its an hardware problem.
I can see that there is hope as long as the PC recognize it.
Click to expand...
Click to collapse
Not really. If the phone is in QHSUSB_DLOAD mode the only known method to revive it is using the Unbrick project which only work when the phone went in this mode after a bad firmware flash. Its not possible to use a RUU neither, the phone must be booted in bootloader/ RUU mode for that. Still worth trying the unbrick project but I don't think there is any hope.
I have done so much and probably have everything I need downloaded already but I am stuck.
LG - K 7 - Family Mobile (Wal-Mart/T-Mobile) phone
Tried to root it and got stuck into a security loop and was able to get into download mode at that point, I used LGUP and now my phone will not do anything. I can not get my computer to recognize it, it does nothing when plugged into charger. Its like stuck off so I cant get to a download screen flash my phone back to the way it was. Please I need help, ive found all the links to people in similiar situations as me and none of them have unlocked this BLACKOUT BRICKED UNLOCK ABLE MODE!
Different programs from android studios to LGUP to ADB and Fastboot, LG support tool, LG Flash Tool, and all the necessary files like LGUP_Lab_Frame_Ver_1_10, LGUP_K330, LGK330.dz, The K33011e (Walmart Family Mobile) zip file, proper .kdz files and some others.
PLEASE HELP ME.
Would be forever in your debt
Shawn
Anyone? Last night I left my phone plugged in all night hoping it make a difference and still cant get anything to load, computer to recognize it im stuck. HELP ME PLZ :fingers-crossed:
I've been running NG3 rooted for 2 years w/ T-Mobile. Due to recent changes on the Tmobile network (they dropped 1900 and switched to b12 = 700a which the 870 can't acquire) I've been forced to move to ATT. When their SIM was loaded I could get 4gLTE so data and text worked, but couldn't make or receive any calls. The signal would drop entirely - no 4gLTE or bars.
I decided I'd try to reload the full NE4. The PC wouldn't recognize the phone via USB (new and old drivers tried). I tried 3 PC's same issue device unknown regardless of Samsung driver age. My wife has the same phone and same issue. Since USB wasn't being recognized (nor on my wifes 870) ODIN was out so I booted and tried loading via the SD card. Well I apparently bricked my phone attempting this. It won't boot beyond the SAMSUNG logo (thereabouts). I can't access the phone via USB. I can however use the bootloader (?) (v-up + pwer + home) and attempt to load from the SD card. I have several stock roms but I receive errors attempting to load these - " footer wrong" and " signature verification failure". I tried Downloading them again but md5 is good on them all
I'm not having fun... . Does anyone know how I can get my phone to load from the boot screen without these errors? I need to get my wife's 870 working too. Her phone can text but no calls (same scenario only I didn't mess here's up just yet). The boot screen on my phone still shows last up date NG3.
I 'm not concerned about being rooted or which version I land on anymore, I'd just to get it working again. Any help is much appreciated - thank you
for what it's worth talking to myself ... the USB cable I've been using for years and has always worked. Tried it on my wife's phone and didn't work but still thinking it's the PC unable to load the USB drivers. Bought 2 new phones. Tried the cable on the new phone - no drivers. Tried the new USB cable that came with the new phone and it worked fine. Used the new USB cable on my soft bricked phone and drivers loaded. I was able to use Odin to upload the OF3 revision to my G870 successfully. Now I'm looking for a way to root it.
any links please?
You can search for "wonder share mobile go" and find how to root with it.
OMG - That was amazing. It rebooted a few times but "SUCCESS". I can't believe all the steps we go through on XDA (and I love XDA) to root a phone but this was 1 click = done. The OF3 can easily be rooted with this software. I uninstalled it (cause I don't trust it) but the root remained and I'm rocking and fat happy.... AND the KNOX = 0
ON THE OTHER HAND - the software soft bricked my Moto G5 Plus. It's not all it's cracked up to be. I contacted the company and it really seemed to me the person responding couldn't read English. Their responses were incoherent and didn't approach the subject at all. Like they were from another country. Yeah.. one of those companies who rely on foreigners to handle their tech support. I'll never use that software again - not trust worthy and the techs are clueless
Thank you very much
hello everybody
this redmi note 9 global 3/64 gb was working just fine.
one day the screen became so lagy so i tried to factory reset it then the screen became totaly not responding so i took it to repair shop he said the touch screen was the problem so he replace it, and didn't work so the problem was not in touch screen.
then suddenly the phone got hard bricked i give it to many repair shop and they can't fix it, every repair shop said different storys, one said the problem is in motherboard's circuit, another one said the phone is global but the manufacturer put an Indian motherboard...
i lost a lot of money but the phone is not fixed
then this week i tried to check if the motherboard stills alive so i plug it on my pc then i saw the usb port of this phone on device manager, so i tried to flash it with sp flash tool,, i downloaded miui 13 fastboot rom (the phone was on miui12 before he got hard brick), i install drivers and bypass and i run sp flash tool i load all the settings, when i press start it says "STATUS_DA_HASH_MISMATCH".
i tried everything to solve this, but nothing, i saw many people who got this error message and i tried there solutions but NOTHING!
i'm not going to more repair shops because one of them stole my selfie camera, so this is my last hope.
i hope someone who has experience to help me.
rz_q said:
hello everybody
this redmi note 9 global 3/64 gb was working just fine.
one day the screen became so lagy so i tried to factory reset it then the screen became totaly not responding so i took it to repair shop he said the touch screen was the problem so he replace it, and didn't work so the problem was not in touch screen.
then suddenly the phone got hard bricked i give it to many repair shop and they can't fix it, every repair shop said different storys, one said the problem is in motherboard's circuit, another one said the phone is global but the manufacturer put an Indian motherboard...
i lost a lot of money but the phone is not fixed
then this week i tried to check if the motherboard stills alive so i plug it on my pc then i saw the usb port of this phone on device manager, so i tried to flash it with sp flash tool,, i downloaded miui 13 fastboot rom (the phone was on miui12 before he got hard brick), i install drivers and bypass and i run sp flash tool i load all the settings, when i press start it says "STATUS_DA_HASH_MISMATCH".
i tried everything to solve this, but nothing, i saw many people who got this error message and i tried there solutions but NOTHING!
i'm not going to more repair shops because one of them stole my selfie camera, so this is my last hope.
i hope someone who has experience to help me.
Click to expand...
Click to collapse
Try mtk auth bypass tutorials on YouTube
the DA file was not compatible with your device, mostly it just work fine with MTK_AllInOne_DA.bin, try looking for DA file that compatible with your device and try flashing it again. or here, https://m929.ru/_pages/mtk_bypass.html
loftheaven said:
the DA file was not compatible with your device, mostly it just work fine with MTK_AllInOne_DA.bin, try looking for DA file that compatible with your device and try flashing it again. or here, https://m929.ru/_pages/mtk_bypass.html
Click to expand...
Click to collapse
i installed the baypass tool on this link and i tried to flash using MTK_AllInOne_DA and DA_6765_6785_6768_6873_6885_6853 but didn't work