Hi,
I got a strange problem there. Installed the newest versions of Answerkeys Disabler and Advanced Config on Monday (had older version on my phone before) and newly installed Weekday.cab for Weekday display in Touchflo and the Call History Tab. After this I had issues with the background light twice. When I lock my phone it is set to shut off after a minute, but the hardware buttons lights and the phone dimmed light stayed on, and when I manually shut them off with the power button the hardware buttons lighted up again after about 5 seconds and after a minute the display also got back into dimmed background light, like when you press a button when the phone is locked and display's off. Only Soft Reset helps to eliminate this problem. Only program I could imagine causing this would be Answerkeys Disabler, but in previous versions i did not have this problem. Anyone have any suggestions?
I have noticed another HORRIBLE crap with my screen - I can see how white|gray color suddenly changes a bit to green.... and back again to gray|white. Seems like a controller keeps changing white balance or gray point cyclically. It is mostly seen when you pull down notification panel and look at it for a minute. The pattern of tint change from green to gray goes like for a 5 seconds each 5-10 seconds. And it is noticeable. Especially when you read the web page that is evenly lit with the light color. It distracts a lot from reading... Like your eyes suddenly find an obstacle and jump over it and all because of slight change in gray point tint.
Does anybody see the same gray|white point floating?
Settings -> Display -> Auto adjust screen power
Turn that off and you will be fine ...
turshija said:
Settings -> Display -> Auto adjust screen power
Turn that off and you will be fine ...
Click to expand...
Click to collapse
I would be happy if it were so simple... I tried everything before posting here (auto adjust, auto brightness, different levels of brightness) - the problem persists.
Hello! I have strange problems with backlight
1) back light is turned off -- i can't see anything on the screen with the day light. Changing the brightness in Settings/Display don't help.
2) but, after power off+power on, backlight is OK for 10 seconds, and turns off right after that.
I find the guy with the same problem,but on droid 2 -- youtube.com/watch?v=RxHqN_lycG8
Btw, in "AP Fastboot" mode ("M" key+PowerOn), backlight is don't turn of.
I try some ROMs, they all don't work for me. Only "kexec CM10" ROM have one difference: if I turn the phone off and on, the backlight is turning on for the 1/2 of second, I can see the lock screen, and after that it is turned off...
What can it be? How can I fix it? Any ideas will be very appreciated! I very like my Droid3,and want it back
al.zatv said:
Hello! I have strange problems with backlight
1) back light is turned off -- i can't see anything on the screen with the day light. Changing the brightness in Settings/Display don't help.
2) but, after power off+power on, backlight is OK for 10 seconds, and turns off right after that.
I find the guy with the same problem,but on droid 2 -- youtube.com/watch?v=RxHqN_lycG8
Btw, in "AP Fastboot" mode ("M" key+PowerOn), backlight is don't turn of.
I try some ROMs, they all don't work for me. Only "kexec CM10" ROM have one difference: if I turn the phone off and on, the backlight is turning on for the 1/2 of second, I can see the lock screen, and after that it is turned off...
What can it be? How can I fix it? Any ideas will be very appreciated! I very like my Droid3,and want it back
Click to expand...
Click to collapse
You'll have to try to turn the brightness up manually. It may be a broken light sensor. If you get in the right light you might be able to see the background and be able to turn it up.
MrObvious said:
You'll have to try to turn the brightness up manually. It may be a broken light sensor. If you get in the right light you might be able to see the background and be able to turn it up.
Click to expand...
Click to collapse
In the dark room, I can see everything on the screen. Unfortunately, brightness in Settings/display does not affect the backlight on my device.
I set the brightness to the maximum, but it still too dark
Is it possible that the problem is in flexible cable?
Hi.
I see a red point on display when the phone is turn off.
I never see red point when phone is turn on.i test it on any color page.but never seen.
it's only seen when phone is turn off and in very dark night with deep assiduity.
it cab be a serious problem?
I got my R1 HD recently. After I set up everything I noticed that when the screen is off, no matter whether I received an email, a sms or a missed call, the LED light just didn't flash. The phone did notify by sound and I can see items in status bar when I turn on the screen.
I looked at everything in the Settings, but couldn't find anything wrong. I called R1 representative and he said he never heard such issue before.
Then I ordered a replacement from Amazon and it arrived today. You know what, same thing happened! No LED light for notification. Just sound notification.
The only time I know there is an LED light is when I charge the phone (red) or when it's fully charged (green).
Has anyone seen such issue before? I greatly appreciate the help!
The LED can really only display red and green as when they are both on the red greatly overpowers the green so the color combination is not detectable. Lightflow can control which apps have access to the LED and which color to display. The LEDs are either on or off - no brightness levels. I have also not been able to get the LED to blink on notifications and suspect that this is also a hardware limitation of the phone. I've been quite disappointed in the LED notification capabilities. There are a couple of other threads about the notification light in the Blu forums here if you search
Thanks for the reply! I did try Lightflow, but it didn't help. In test mode or real mode, what I got was just a status bar notification, no LED.
yaconsult said:
The LED can really only display red and green as when they are both on the red greatly overpowers the green so the color combination is not detectable. Lightflow can control which apps have access to the LED and which color to display. The LEDs are either on or off - no brightness levels. I have also not been able to get the LED to blink on notifications and suspect that this is also a hardware limitation of the phone. I've been quite disappointed in the LED notification capabilities. There are a couple of other threads about the notification light in the Blu forums here if you search
Click to expand...
Click to collapse
I did have to change some settings for it to work with the Blu phone.
These are the settings I am using that allow apps to turn on the LED:
Under General settings, the following are checked:
Enable Light Flow
Show LED in priority mode
Device Admin
Enable Clear all
Accessibility check
Version upgrade reminder
Under Device settings and root, the following are checked:
Direct mode
Root mode
Run every command as root
Show LED with screen on
Nexus 5 force LED reset
I also have light flow enabled under settings->accessability and lightflow has root permission in supersu.
Oh so I have to root the phone? I just called Blu customer service, and they told me I need to do a factory reset..
Try it and let us know what happens, please. Some phones require root and others don't. I reflashed and rooted and xposed mine before I did anything else so I don't know if it works without root or not.
Solved! Did a hard reset (not factory data reset thru Settings) by pressing power button and volume up together to enter the recovery menu. I cannot believe Amazon/Blu missed such an important step that the customer has to do it by themselves..
Same here bit in a Blu vivo 5R in this case.
So... I need to execute a Factory Reset? And then appears the option for LED notification And works.
Hi ! I did buy a BLU VIVO XL2. No LED activity for notifications. I have the options for LED behavior (Settings/Advanced Settings/Under Hardware title, LED indicator, Notification Reminder ON but green LED never flashes when expected. Factory Reset tried: I used Volume Up & Power Button to get recovery menu. There, I took a backup (SD storage, no compression, several chunks of data). After that, I selected Factory Reset. When rebooted, Google did his automatic restore of phone. After that, I tried Restore from Recovery menu, but a msg informed backup was corrupted, so, I did get a full Factory Reset status, with my phone memory user data lost. NO LED Notifications working after all these actions !!!!! . LED is alive, when reporting Power status, so it is not HW damaged. I will keep fighting to get my LED notification activity working... Regards, Norberto !!!
Try the free version of LightFlow from the play store. It will allow you to test and turn individual notifications on or off. The light can on display red and green colors and the red is very much brighter than the green. Mine turns flashing red when I miss a phone call on the Blu R1 HD>
Hi !! Thnx yaconsult. I did try free & legacy, unsuccessfully. Have a good day !!
I guess the Vivo works differently, then. The notification light works ok on my R1. If I miss a call, I get a blinking red light.