Mi max 2 stuck at Tux logo - Xiaomi Mi Max 2 Questions & Answers

My mi max 2 is stuck at Tux logo , Not Booting into fast boot mode or recovery , and boot loader is also locked , I tired flashing fastboot rom by shorting edl pins , In mi flash beta version the flash is showing successful after 20-25 mins but I think it's showing wrong because it's still stuck at Tux logo , I tired different versions of mi flash , In letest version I am getting this error - write failed sector 9216( error in attached photos ) , I also tired unplugging the battery and display , then it show , hello packet error , please anyone able to help ?

try use QFIL

Related

[Help Needed] Getting boot-loop after flashing every ROM! Bootloader unlocked

Hi Peoples,
I am getting bootloop after flashing China Dev, China Stable or Global ROM. My MI5's boot loader is already unlocked. So I don't need to flash via EDL mode. So far I am seeing below scenarios:
* Flash successful without edl mode - MI mi.com logo coming then suddenly restarting to the same state and again showing mi logo.
* Flash successful without edl mode - MI mi.com logo coming then ..... android logo coming then again looping the same thing. After couple of same loop then only mi logo looping!
I tried Mi Flash tool from fastboot ROM section, I tried another Flashtool from the en.miui forum and lastly I tried MiFlash Beta. But the same scenario.
I have also seen several times that, after flashing phone went to edl mode itself and could not be ON and none of the button combination works. Then I had to Flash again. However, still in boot loop. This is crazy!
Please help me out if you can!
Got the same problem - but i did not yet flashing any ROM, my xiaomi mi5 fall into boot loop after reboot (I did not changing any settings, or smth else).
Maybe someone can help in this situation? (my bootloader is locked)
Have you found any solution for this problem? I am experiencing the same issue when I tried to flash Chinese Rom to global rom in Mi5

Hardbricked xiaomi mi max 2 dead phone no fastboot no recovery only edl.

hi i need help my mi max 2 is hard bricked stuck in only edl mode i tried to fix it with xiaomimiflash tool but evry time i flash a new fastboot it shows error time write out or phone disconnected I even tried to use qfil even that doesn't work help me to bring back to life my phone and sorry for my bad English :/

Phone got bricked randomly - QUALCOMM HS-USB QDLOADER 9008 (NEED HELP)

I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
I ve little same issue. need help too.
I have Mi A2 runnig on android8.1
but it didnt update 9.0
so I try with twrp but fail no boot anymore.
I use miFlash tool. accdently I locked phone. flashed rom didnt boot.
now I ve just fastboot mode. or open 'android one' screen and then goes black.
I try EDL mode by test point inside phone.
flash with 2018 mi Flash tool but stuck in flashing...
flash with 2016 mi Flash tool write succesful flashed afte 6min. but not boot.
I read 2 days on forums. cant find anything to do.
is there any solution?
thanks
Hi, has anyone made any progress?
Theduardds said:
I was using my mi a2 and it randomly freezed, then i restarted using power button, but he didn't turned on, now it is just black screen and i can't get into bootloader mode or turn the phone on.
Bootloader was locked, never tried to unlock.
I think it got stuck on EDL mode because it shows up 'qualcomm hs-usb qdloader 9008' on device manager on windows.
Already tried to use mi flash tool to flash the last ROM, it recognize the phone but fails every time.
Neither adb or fastboot recognizes the phone.
Some errors that i had using the tool:
Failed to open the SDCC Device slot 0 partition 0 (it shows up only on version 2019.11.15.0)
Cannot receive hello packet (when i get this error, i hold the power button for a few seconds then i try again only to get the error below)
Error when flashing storsec.mbn
Can someone help me?
UPDATE
I downloaded mi flash tool 2016.08.30.0 and i can successfuly flash the rom, but still got black screen with no response.
Click to expand...
Click to collapse
A year ago i had the same issue kinda. The only thing that worked for me was flashing mi 6x stock rom and after some trial an error it flashed and it fixed. The only problem is i have a mi 6x forever. Basically download mi 6x stock rom. Try that mi flash tool and keep hard rebooting and click flash button right after it vibrates. If lucky sometime will work and flash. If nothing try older versions of mi flash tool. Good luck.
all of you have the same problem ... you bootloop into edl mode because you have ARB4 triggered ..that means the only stock you can flash in miflash is ARB4 rom ( latest most up to date )
you also need patched programmer file since flashing ARB4 requires miui account
the fix to this problem is documented everywhere and explained lots of times ...just read ..follow this guide and one-click tool to unbrick
next time read ......a little ..
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/

I can't install any custom rom

Good Morning! I'm having a boring problem with my Mi A2. I can not flash any ROM on my device. In the Fastboot screen does not appear Mi Bunny, although the PC recognizes. This happened after I had to put the phone in EDL mode to restore the stock kidney, in one in a failed attempt to install the miui 10 at the time the phone had got stuck on the screen initialization.
If anyone has a help I would be very grateful. It almost always gets stuck in error 1 or error 7 In twrp no custom ROM is recognized.. I don't remember the description but it is almost always an update error.

my redmi note 9 merlin is boot looping i cant access recovery mode

i was trying to downgrade my phone to miui 11 global version by replacing the miui rom using option in update " choose update package " it loaded to the boot screen and run fo 99.99% and i got a black screen i tried to on my phone but it got stuck in boot loop i cant access recovery mode and no fastboot device is not rooted and an important thing i didnt reset my device before downgrading pls tell me how to repair it or to put in download mode or to access recovery mode i can see only redmi logo not android below it pls help me

Categories

Resources