Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
NOTE:
WE ARE ENCRYPTED (FILE BASED FORCED ENCRYPTION). So if you are unencrypted format data partition or use any no_verity solution you want. We don't support it.
Files to download before starting:
* Download stable OxygenOS full zip 10.3.2 from here.
(XDA thread for reference)
* Download TWRP image & zip Installer from Mauronofrio
* Download AICP ROM (Link)
* Download latest OpenGapps nano or micro package for ARM64 & Android 10.0 from here
Setting the phone into a "clean" device state and/or flash AICP for the first time:
(e.g. coming from another custom ROM)
1. Connect the phone to a PC.
2. Reboot to bootloader and boot your device into recovery mode:
Code:
fastboot boot twrp-3.3.1-18-enchilada-Q-mauronofrio.img
.
3. Wipe the System, Cache, and Data.
4. Flash the latest OxygenOS zip & Flash TWRP Installer zip.
5. Reboot to Recovery.
6. Flash OxygenOS zip again (to make sure it is on both slots) & TWRP Installer zip.
7. Reboot to Recovery again.
8. Flash the AICP ROM zip. You don't need to flash twrp zip anymore since we build it with rom.
9. Reboot to Recovery once again.
10. Flash OpenGApps (nano recommended) package and latest Magisk if you want to get rooted.
11. Reboot.
Installing ROM Updates ("dirty flashing") MANUALLY
1. Reboot to Recovery.
2. Flash Substratum rescue zip if you have a theme applied or uninstall the theme completely.
3. Flash the AICP ROM zip. You don't need to flash twrp zip anymore since we build it with rom.
4. Reboot to Recovery.
5. Flash OpenGApps package.
6. Flash Magisk zip, if you want to be rooted.
7. Reboot.
We recommend to use integrated Updater via AicpExtras to update system since it will maintain gapps and magisk. Note that update process is slow and it will be faster if you maintain the device awake.
Currently supported Root Solution:
Magisk stable
Magisk version >= 20.3 recommended.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_oneplus_sdm845
Device tree source:
https://github.com/AICP/device_oneplus_asm845-common
https://github.com/AICP/device_oneplus_enchilada
Vendor source:
https://github.com/AICP/proprietary_vendor_oneplus
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
AICP Team
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
AICP, ROM for the OnePlus 6
Contributors
csolanol, wartomato, semdoc
Source Code: https://github.com/aicp
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OOS Stable 10.3.2
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 15
Created 2018-09-14
Last Updated 2020-04-06
Reserved #1
Reserved #2
Oos cam?
se7ensde said:
Oos cam?
Click to expand...
Click to collapse
yup
Any screen shot ??
Shakib123 said:
Any screen shot ??
Click to expand...
Click to collapse
really are screenshots needed?
Great work bro
Any major bugs?
csolanol said:
really are screenshots needed?
Click to expand...
Click to collapse
Not really, this awesome work is enough. Thanks for bringing us AICP.
JDR0iD said:
Great work bro
Any major bugs?
Click to expand...
Click to collapse
Yes, no screenshots. LOL.
IMPORTANT.
Before start to flash it:
* Download 5.1.11 Firmware OnePlus6Oxygen_22_OTA_015_all_1808102118_770880.zip and move to your internal SDCard.
* Download TWRP: twrp-3.2.3-0-enchilada.img
* Download TWRP installer zip: twrp-installer-enchilada-3.2.3-0.zip and move that to your internal SD card.
* Download AICP Weekly and copy to your internal SD card.
* Download latest OpenGapps nano package for arm64 and copy to your internal SD card.
1. Go to bootloader mode and boot your device into recovery mode: (use the lastest official TWRP)
fastboot boot twrp-3.2.3-0-enchilada.img
Click to expand...
Click to collapse
2. wipe system, data and caches
3. flash OnePlus6Oxygen_22_OTA_015_all_1808102118_770880.zip + TWRP installer zip in a row.
4. reboot to recovery
5. flash OnePlus6Oxygen_22_OTA_015_all_1808102118_770880.zip again.
This way, we are sure that we have same firmware on both A&B slot's.
6. Boot into system
Now, we are ready to flash AICP
a. Go to recovery again. ( TWRP was flashed already...)
b. Wipe system, data and caches
c. Flash AICP.zip + TWRP installer
d. Reboot to recovery
e. Flash GAPPS + Magisk 17.1 (optiional)
f. Reboot to system.
On dirty flash:
** Repeat steps between a-f.
You have to flash TWRP installer after every ROM.zip update then boot into other slot and flash GAPPS + Magisk (optional)
** NO NEED TO CLEAN DALVİK/CACHES
** NEVER switch slots manually from recovery.
Enjoy !!!
Installed it and now testing :laugh: good work for the amazing ROM
semdoc said:
* Download latest OpenGapps nano package for arm64 and copy to your internal SD card.
Click to expand...
Click to collapse
Sorry, only for my interest. To use nano package instead of pico is only for the face-unlock thing or also for the account login problems I sometimes could read in other threads or of other reason, perhaps you can tell me please.
After setup AICP, can I uninstall e.g. google search and Device Health Services and face detection/unlock stuff ? Thanks in advance.
Bonito77 said:
Sorry, only for my interest. To use nano package instead of pico is only for the face-unlock thing or also for the account login problems I sometimes could read in other threads or of other reason, perhaps you can tell me please.
After setup AICP, can I uninstall e.g. google search and Device Health Services and face detection/unlock stuff ? Thanks in advance.
Click to expand...
Click to collapse
You can allways try with pico package... Try and report please
@csolanol or @semdoc , what is the reason to have the os on both slots ?
Also nessesary if I am coming from Stock-OOS 5.1.11 with July Security, just rooted and TWRP ?
The one we should flash is the rollback version which you have to flash if you
come from a higher security patch or better if you come from Android 9 to 8, but it don't format data ? So this ROM has July or August patch ?
Sorry when asking again, makes me all a lit bit confused, on other 8.1 custom roms we don't have to do so. Then I can flash and tell about pico package.
Bonito77 said:
@csolanol or @semdoc , what is the reason to have the os on both slots ?
Also nessesary if I am coming from Stock-OOS 5.1.11 with July Security, just rooted and TWRP ?
The one we should flash is the rollback version which you have to flash if you
come from a higher security patch or better if you come from Android 9 to 8, but it don't format data ? So this ROM has July or August patch ?
Sorry when asking again, makes me all a lit bit confused, on other 8.1 custom roms we don't have to do so. Then I can flash and tell about pico package.
Click to expand...
Click to collapse
You have to. For example you flash ob2 it flashes to one slot. Not both. So you flash the ob2 then boot to twrp technically your now on ob2. So you flash a rom again that's on pie that will flash it to the 8.1 slot because your already on the pie slot. So if you keep both slots either pie or Oreo you won't have any problems with different firmware and can flash your life away and if your going from just to September which is what I'm assuming this is then you will probably not have to format data. But if you flash back to July you will. Or any other security patch before September.
@joemossjr , that's a really comprehensive answer, more than one thanks worthy.
Bonito77 said:
@joemossjr , that's a really comprehensive answer, more than one thanks worthy.
Click to expand...
Click to collapse
No problem lol
joemossjr said:
Flash ob2 flash twrp reboot recovery then Flash ob2 then twrp again reboot recovery Flash omni then twrp reboot recovery. Flash gapps and magisk 17.1(optional) format data. Boot
Click to expand...
Click to collapse
Sorry for spaming. This guide from you also works ? Of course with the stuff needed for AICP and no format data but the wipes which are recommending in OP instructions.
Because I am not at home and no PC.
AICP is my favorite rom so far....but i have a question....is there a navigation gestures like in oos or in other roms?....
James Blode said:
AICP is my favorite rom so far....but i have a question....is there a navigation gestures like in oos or in other roms?....
Click to expand...
Click to collapse
You are asking about these changes probably:
http://gerrit.aicp-rom.com/#/q/topic:opnav-gestures+(status:open+OR+status:merged)
---------- Post added at 00:43 ---------- Previous post was at 00:37 ----------
Bonito77 said:
Sorry for spaming. This guide from you also works ? Of course with the stuff needed for AICP and no format data but the wipes which are recommending in OP instructions.
Because I am not at home and no PC.
Click to expand...
Click to collapse
Actually flashing procedure is same for ALL ROM's...
Trivial Part: You have to flash same stock ROM on both A&B slots... Latest Oreo firmware If you are planning to flash any oreo based custom ROM, or latest OB If you are going to flash pie based custom ROM, respectively... Or you will loose yourself in endless bootloops....
After that... As you may noticed, the flashing row in TWRP is same...
FYI.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
crdroid_features/README.mkdn at 11.0 · crdroidandroid/crdroid_features
our main features (why you love us). Contribute to crdroidandroid/crdroid_features development by creating an account on GitHub.
github.com
Always Have a full functional Backup. Just in case!
Rom Download Link :
Downloads for : Samsung Galaxy S4 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Lineage Recovery link :
Downloads for : Samsung Galaxy S4 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Recomended Bootloader/Modem :
I9506XXUDRB1_I9506XXUDRA1_bootmodem.tar | by kyasu for Galaxy S4
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
GAPPS: DOWNLOAD GAPPS - Not updated yet for 11.0 -- use Beta from link below
Platform: ARM
Android: 11.0
OpenGapps :
OpenGApps - Browse /arm at SourceForge.net
OpenGApps daily releases
sourceforge.net
BITAGaaps :
[CUSTOM][GAPPS] BiTGApps for Android
Hi All, Welcome to the official BiTGApps Release thread! BiTGApps is a customized Google Apps Package to sideload Google Apps in Custom Android OS. It comes with many useful features and easy installation. Get features list, instructions...
forum.xda-developers.com
Device Source:
GitHub - Khalvat-M/kernel_samsung_msm8974: samsung SD800/801 kernel
samsung SD800/801 kernel. Contribute to Khalvat-M/kernel_samsung_msm8974 development by creating an account on GitHub.
github.com
** Make sure you're running a proper working Recovery (TWRP is recommended)
TWRP Link :
Download TWRP for ks01lte
Download TWRP Open Recovery for ks01lte
dl.twrp.me
1) Copy crDroid zip, GAPPS zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash GAPPS
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk v20.1 (whatever is most recent, Android 10 is now supported)
ROM Asking for Decryption key on boot:
This isn't a ROM issue, but an issue with your device. Kindly boot into TWRP and go to wipe - choose FORMAT - TYPE - YES
***This WILL wipe your INTERNAL storage. Backup before performing the format.
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
WHATS WORKING
1. Ril (Call&Network)
2. Bluetooth
3. Sounds
4. Sensors
5. Gps
6. Wifi
7. Camera
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed
- have modified system files
Thanks to:
- fagyi - Can't stress enough how much you do. Thank you so much for everything!!!
- Google
- LineageOS
- SlimRoms
- AOSPA
- AOSIP
- AICP
- OmniRom
- NamelessROM
- Many others... (if you've been left out just send a PM )
XDAevDB Information
[ROM] [11.0] crDroidAndroid v7.0 [UNOFFICIAL], ROM for the S4 i9506( ks01lte)
Contributors
khalvat
Source Code: https://github.com/crdroidandroid
ROM OS Version: Android 11
Based On: LineageOS
Version Information
Status: Stable
Created 2020-10-01
Last Updated 2021-09-10
Pin
New build 2020-10-02
Fixed camera
Expect Anticipate
Thank you
Hi,
may I ask you if it is possible to upgrade from CrDroid-OSv6 Android 10 ?
New build 2020-10-06
welcome to CrDroid now
Edit: Clean flash needed
Thank you
khalvat said:
New build 2020-10-06
welcome to CrDroid now
Edit: Clean flash needed
Click to expand...
Click to collapse
Good
khalvat said:
New build 2020-10-06
welcome to CrDroid now
Edit: Clean flash needed
Click to expand...
Click to collapse
Don't go over to the beginning
it is standing on logo
Waoo
New build 2020-10-08
Fixed boot issue
Fixed Home button
Fixed more bugs
I haven't flashed this as yet, as I am building and flashing/testing android 10 (crDroid). If someone could tell me, how many of the features are they supporting from the last final build of Android 10 crDroid, are they currently supporting in Android 11? is it heavily cut down?
I have found they are still adding new features as well as bug fixes to crDroid android 10.
DiamondJohn said:
I haven't flashed this as yet, as I am building and flashing/testing android 10 (crDroid). If someone could tell me, how many of the features are they supporting from the last final build of Android 10 crDroid, are they currently supporting in Android 11? is it heavily cut down?
I have found they are still adding new features as well as bug fixes to crDroid android 10.
Click to expand...
Click to collapse
There aren't many functions, for example
no battery number and no button action
Does not work SDXC card and bad format.
kiprio said:
it is standing on logo
Click to expand...
Click to collapse
Check that you are on the correct firmware for baseband/modem and do a clean flash
Version from 8.10.2020 is starting ok yet. But this vesion has others problems. The SDXC card does not work and format as extsdcard also does not work. Battery is too much hot. Android 10 works perfectly.Possibly next version will come better.
I did clean flash with BitGapps and Magisk. It is lagging so now it is unussable.
tomogo said:
I did clean flash with BitGapps and Magisk. It is lagging so now it is unussable.
Click to expand...
Click to collapse
ummm... its alpha, its not meant to be used as a daily or such.
khalvat said:
Version Information
Status: Alpha
Click to expand...
Click to collapse
does this have support for VoLTE?
New build 2020-11-06
Device changelog:
Merged november security patch
Fixed lag completely
Fixed hotspot
Fixed camera on video call
Fixed blur for our device
Fixed face unlock for our old device
And many bugs fixed too
Known issue
Memory sd card
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
crdroid_features/README.mkdn at 11.0 · crdroidandroid/crdroid_features
our main features (why you love us). Contribute to crdroidandroid/crdroid_features development by creating an account on GitHub.
github.com
Always Have a full functional Backup. Just in case!
Rom Download Link :
Kltechn :
Downloads for : Samsung Galaxy S5 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Klte:
Downloads for : Samsung Galaxy S5 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Klteduos
Downloads for : Samsung Galaxy S5 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Device sources:
GitHub - Khalvat-M/kernel_samsung_msm8974: samsung SD800/801 kernel
samsung SD800/801 kernel. Contribute to Khalvat-M/kernel_samsung_msm8974 development by creating an account on GitHub.
github.com
GAPPS: DOWNLOAD GAPPS - Not updated yet for 11.0 -- use Beta from link below
Platform: ARM
Android: 11.0
OpenGapps :
OpenGApps - Browse /arm at SourceForge.net
OpenGApps daily releases
sourceforge.net
BITAGaaps :
[CUSTOM][GAPPS] BiTGApps for Android
Hi All, Welcome to the official BiTGApps Release thread! BiTGApps is a customized Google Apps Package to sideload Google Apps in Custom Android OS. It comes with many useful features and easy installation. Get features list, instructions...
forum.xda-developers.com
** Make sure you're running a proper working Recovery (TWRP is recommended)
TWRP Link : https://twrp.me/samsung/samsunggalaxys5qualcomm.html
1) Copy crDroid zip, GAPPS zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash GAPPS
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk v20.1 (whatever is most recent, Android 10 is now supported)
ROM Asking for Decryption key on boot:
This isn't a ROM issue, but an issue with your device. Kindly boot into TWRP and go to wipe - choose FORMAT - TYPE - YES
***This WILL wipe your INTERNAL storage. Backup before performing the format.
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
WHATS WORKING
1. Ril (Call&Network)
2. Bluetooth
3. Sounds
4. Sensors
5. Gps
6. Wifi
7. Camera
8. Fingerprint
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed
- have modified system files
Thanks to:
- fagyi - Can't stress enough how much you do. Thank you so much for everything!!!
- Google
- LineageOS
- SlimRoms
- AOSPA
- AOSIP
- AICP
- OmniRom
- NamelessROM
- Many others... (if you've been left out just send a PM )
XDAevDB Information
[ROM] [11.0] crDroidAndroid v7.0 [UNOFFICIAL], ROM for the S5 ( klte)
Contributors
khalvat
Source Code: https://github.com/crdroidandroid
ROM OS Version: Android 11
Based On: LineageOS
Version Information
Status: Stable
Created 2020-10-04
Last Updated 2021-09-10
Request
Please develop a version for Galaxy s5 (Japan) kltedcm....
Thank you very much
You are The Best @khalvat !!
would this work with kltedv?
Hi,
Been using your android 10 ROM on my kltedv for a few weeks and really pleased with it. Any chance this Android 11 ROM will work on it as well?
Also, I noticed an 'auto power on' issue on your android 10 ROM here.. https://forum.xda-developers.com/showpost.php?p=83640829&postcount=276
Thanks.
Using this rom now. Initial testing has most things working, doesn't play well with Migrate yet but that won't be a rom issue. A little bit clunky moving between screens but understandable as it's alpha. Overall impression, positive
first seconds with this rom..omg so laggy..like 2 fps in a game its impossible to use...waiting for fixes))))
SIM not detected
@khalvat could you please pick that commit for microG support?
https://github.com/crdroidandroid/a...mmit/57d1ad30d26edc67cd3e41f0fc84679569d76446
which model of S5 does it work on?
950F?
troyer1234 said:
which model of S5 does it work on?
950F?
Click to expand...
Click to collapse
Klte is SM-G900F and similar.
Skerleton said:
first seconds with this rom..omg so laggy..like 2 fps in a game its impossible to use...waiting for fixes))))
SIM not detected
Click to expand...
Click to collapse
Laggy as hell. Even without GApps. Missing qr scanner seems to be a common issue in android 11.
troyer1234 said:
which model of S5 does it work on?
950F?
Click to expand...
Click to collapse
Works on my kltedv, just a little laggy but everything tested so far works
Testing this great ROM, as previously mentioned the device is laggy, it can be worked around by removing animations on developer tools, however the recent animation doesn't seems to be affected by it, currently finding glitches on the bottom right of the screen as a ghost image from current working screen while scrolling (A little hard to explain and even more to show it up) it's pretty decent for gaming combined with the gpu drivers available for the device. Looking forward for the development, if there is space for beta testing I'll gladly help!
Make sure to backup efs partition before flashing this ROM. Had a Bluetooth keeps stopping bug after going back to lineageOS 16.0
khalvat said:
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Always Have a full functional Backup. Just in case!
Rom Download Link :
Kltechn :
Soon
Klte:
https://androidfilehost.com/?fid=8889791610682951429
klteduos :
Soon
GAPPS: DOWNLOAD GAPPS - Not updated yet for 11.0 -- use Beta from link below
Platform: ARM
Android: 11.0
OpenGapps : https://opengapps.org/
BITAGaaps : https://forum.xda-developers.com/an...ps-android-t4012165/post81060589#post81060589
** Make sure you're running a proper working Recovery (TWRP is recommended)
TWRP Link : https://twrp.me/samsung/samsunggalaxys5qualcomm.html
1) Copy crDroid zip, GAPPS zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
8) Flash GAPPS
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk v20.1 (whatever is most recent, Android 10 is now supported)
ROM Asking for Decryption key on boot:
This isn't a ROM issue, but an issue with your device. Kindly boot into TWRP and go to wipe - choose FORMAT - TYPE - YES
***This WILL wipe your INTERNAL storage. Backup before performing the format.
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
WHATS WORKING
1. Ril (Call&Network)
2. Bluetooth
3. Sounds
4. Sensors
5. Gps
6. Wifi
7. Camera
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed
- have modified system files
Thanks to:
- fagyi - Can't stress enough how much you do. Thank you so much for everything!!!
- Google
- LineageOS
- SlimRoms
- AOSPA
- AOSIP
- AICP
- OmniRom
- NamelessROM
- Many others... (if you've been left out just send a PM )
XDAevDB Information
[ROM] [11.0] crDroidAndroid v7.0 [UNOFFICIAL], ROM for the S5 ( klte)
Contributors
khalvat
Source Code: https://github.com/crdroidandroid
ROM OS Version: Android 11
Based On: LineageOS
Version Information
Status: Alpha
Created 2020-10-04
Last Updated 2020-10-04
Click to expand...
Click to collapse
Very good work [emoji2]
Enviado desde mi GT-I9305 mediante Tapatalk
@elberth. Please be observant and respectful of XDA Rule #4 for all of your future posts. Thank you.
Badger50
Forum Moerator
Mod edit: Translation.
Hello friends, why can't I root android R WITH Magisk ??
hola amigos, porque no puedo rootear android R CON Magisk??
elberth said:
hola amigos, porque no puedo rootear android R CON Magisk??
Click to expand...
Click to collapse
Use magisk 21. It is in beta?
elberth said:
hola amigos, para hacer el root con magisk A11
Click to expand...
Click to collapse
Please do not post links to fake magisk. Only official source is github. And pleas use English language
https://github.com/topjohnwu/Magisk/releases/tag/v21.0
Very good job to the developer the room is still very green but it is on the right track [emoji6]
Enviado desde mi SM-G900F mediante Tapatalk
Where Kltechnduo?
Please develop a version for Galaxy s5 (Japan) kltechnduo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
MIUI 13 for Galaxy S9/S9 Plus with Project Treble - Porting R/A
- Warning this is not for daily use.
- GSI made by Nippon, credit goes to him.
-MIUI 13 Port Alpha #1 without R/A is Android 11, with R/A is Android 12.
Features:
- Full MIUI 13 firmware from NIPPON GSI Global.
- Added a brightness overlay to try and improve it but more work needs to be done.
- Modified vendor and disabled KeyStore.
Working:
- RIL.
- SD Card.
- Touch.
- Hard press button.
Bugs:
- Most likely more stuff I haven't noticed yet.
Warning:
- The ROM, has not yet been tested on Samsung Galaxy S9 Plus, we look for beta testers. To propose yourself join on our telegram channels.
Guide [HOW TO INSTALL IT]:
1. Extract the zip, and save it on SD Card or memory
2. Do proper backup of your important vids, pics, files, etc.
3. Reboot to recovery
4. Clean wipe (Dalvik, system,data,vendor,cache)
5.[T.2] Flash vendor.img & boot.img for your device.
6. Flash system.img
7. Flash permissiver, zygote, etc. if needed.
8. Reboot and good luck.
Instructions only for Samsung S9 Plus users:
-Reboot to recovery
-Wipe system, cache, dalvik and data
-Flash CrDroid Android Q (CrDroid)
-Flash System img from miui
-Mount vendor in twrp and go to /vendor/lib64/hw/ and rename the keystore file with a .bak at the end
Downloads:
MIUI13 R/A
MIUI13
Okami Project [Tips, Fixs, Extras]:
Project
Kernel Source:
Source
Tips:
-[T.2] In case, it does not go for Samsung Galaxy S9 Plus users, use another vendor, possibly AOSP and/or CrDroid or the stock vendor.
-In case, it does not go for Samsung Galaxy S9 Plus users, use another kernel, possibly AOSP and/or CrDroid.
-To report bugs you will have to be clear and share the log.txt.
Credits:
[email protected] for Vendor & Boot.
Social Network:
Telegram Group
Telegram Channel
Telegram Support Bot
Thread re-opened.
can you post the link for Android 11 of this thread?
[CLOSED][ROM][NIPPON GSI Port][Alpha] MIUI 13 Android 11
DISCLAIMER * Your warranty is now void. * We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels. * You do it at your own risk and take the responsibility upon yourself and you are not to...
forum.xda-developers.com
vwong said:
can you post the link for Android 11 of this thread?
[CLOSED][ROM][NIPPON GSI Port][Alpha] MIUI 13 Android 11
DISCLAIMER * Your warranty is now void. * We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels. * You do it at your own risk and take the responsibility upon yourself and you are not to...
forum.xda-developers.com
Click to expand...
Click to collapse
I just update this Thread, if you go to the beginning, in the part where there is Downloads, you find MIUI13, careful that MIUI 13 R/A is with Android 12.
I have star2lte (S9+) currently downloading it.
I'll post a feedback when it's done.
EDIT:
Device boots to download mode.
What I did:
-Wiped system, cache, dalvik and data
-Flashed CrDroid Android Q (CrDroid)
-Flashed System img from miui13 R/A
- Renaming /vendor/lib64/hw/ keystore file results with Error 1.
Does it work on G9650?
Do we have screenshots
I tried it and there a weird hole punch at the top other then that is working ig
Supernova| said:
I tried it and there a weird hole punch at the top other then that is working ig
Click to expand...
Click to collapse
Does it work on G9650?
I tried it for s9+ there's a weird hole at the top, it recognises the sim card but calls doesn't work. Other than that it works.
Coach876_ said:
I tried it for s9+ there's a weird hole at the top, it recognises the sim card but calls doesn't work. Other than that
Click to expand...
Click to collapse
Coach876_ said:
I tried it for s9+ there's a weird hole at the top, it recognises the sim card but calls doesn't work. Other than that it works.
Click to expand...
Click to collapse
s9 plus with exynos or snapdragon?
Exynos
F17mous said:
I have star2lte (S9+) currently downloading it.
I'll post a feedback when it's done.
EDIT:
Device boots to download mode.
What I did:
-Wiped system, cache, dalvik and data
-Flashed CrDroid Android Q (CrDroid)
-Flashed System img from miui13 R/A
- Renaming /vendor/lib64/hw/ keystore file results with Error 1.
Click to expand...
Click to collapse
From an user on support:
I installed the rom on galaxy s9 + according to the instructions, coming after android 11, i had to install the vendor on android 10, for crdroid 10. After installing crdroid, I flashed system.img and reboot. Initially the phone went into download mode, then I went back into recovery mode and flashed boot.img. This time it was lucky, the phone opened.
Follow this Guy.
Guilhermegh7 said:
Does it work on G9650?
Click to expand...
Click to collapse
I don't think because it's for Exynos, but you can use the system.img and replace vendor.img and boot.img with your for the snapdragon. Use AOSP or stock.
Supernova| said:
I tried it and there a weird hole punch at the top other then that is working ig
Click to expand...
Click to collapse
Use Okami Project, and the fixes you find in the telegram channel.
Badger50 said:
Тема вновь открыта.
Click to expand...
Click to collapse
я извняюсь , а означает что R/A?
it cant use on A3 2017
although using cr boot vendor still stuck on first logo
MIUI 12.5.3 worked but no sim detect
Does it work on G965N device?
AlexanderDev said:
DISCLAIMER
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
MIUI 13 for Galaxy S9/S9 Plus with Project Treble - Porting R/A
- Warning this is not for daily use.
- GSI made by Nippon, credit goes to him.
-MIUI 13 Port Alpha #1 without R/A is Android 11, with R/A is Android 12.
Features:
- Full MIUI 13 firmware from NIPPON GSI Global.
- Added a brightness overlay to try and improve it but more work needs to be done.
- Modified vendor and disabled KeyStore.
Working:
- RIL.
- SD Card.
- Touch.
- Hard press button.
Bugs:
- Most likely more stuff I haven't noticed yet.
Warning:
- The ROM, has not yet been tested on Samsung Galaxy S9 Plus, we look for beta testers. To propose yourself join on our telegram channels.
Guide [HOW TO INSTALL IT]:
1. Extract the zip, and save it on SD Card or memory
2. Do proper backup of your important vids, pics, files, etc.
3. Reboot to recovery
4. Clean wipe (Dalvik, system,data,vendor,cache)
5.[T.2] Flash vendor.img & boot.img for your device.
6. Flash system.img
7. Flash permissiver, zygote, etc. if needed.
8. Reboot and good luck.
Instructions only for Samsung S9 Plus users:
-Reboot to recovery
-Wipe system, cache, dalvik and data
-Flash CrDroid Android Q (CrDroid)
-Flash System img from miui
-Mount vendor in twrp and go to /vendor/lib64/hw/ and rename the keystore file with a .bak at the end
Downloads:
MIUI13 R/A
MIUI13
Okami Project [Tips, Fixs, Extras]:
Project
Kernel Source:
Source
Tips:
-[T.2] In case, it does not go for Samsung Galaxy S9 Plus users, use another vendor, possibly AOSP and/or CrDroid or the stock vendor.
-In case, it does not go for Samsung Galaxy S9 Plus users, use another kernel, possibly AOSP and/or CrDroid.
-To report bugs you will have to be clear and share the log.txt.
Credits:
[email protected] for Vendor & Boot.
Social Network:
Telegram Group
Telegram Channel
Telegram Support Bot
Click to expand...
Click to collapse
Not working on s9+ the android 12
my phone is mi 8 pro codename is equuleus.
can i flash this rom?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn
Flashing Instructions:
Pre-installation:
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
Before installing Android 13 based build you need to update firmware to 12 version, here is a guide on how to do it (credits to Linux4):
LTE variant: https://lineage.linux4.de/fw_update/gta4xl.html
WIFI variant: https://lineage.linux4.de/fw_update/gta4xlwifi.html
First time installation:
Use crdroid recovery
Format Data / Factory reset
Install Rom
Install gapps (Optional)
Reboot
Update installation:
Reboot to recovery
Wipe Cache
Install rom
Install gapps (Optional)
Reboot
Sources:
ROM: https://github.com/crdroidandroid
Device sources: https://github.com/tabs6lite-dev
Kernel sources: https://github.com/tabs6lite-dev/android_kernel_samsung_gta4xl
Download:
- Wifi Variant
ROM https://crdroid.net/gta4xlwifi
Changelog: https://raw.githubusercontent.com/c...ndor_crDroidOTA/13.0/changelog_gta4xlwifi.txt
crDroid recovery: https://sourceforge.net/projects/darkjoker360-developements/files/Samsung/Galaxy%20Tab%20S6%20Lite/gta4xlwifi-12.1-recovery.img/download
- LTE Variant
ROM https://crdroid.net/gta4xl
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/13.0/changelog_gta4xl.txt
crDroid recovery: https://sourceforge.net/projects/darkjoker360-developements/files/Samsung/Galaxy%20Tab%20S6%20Lite/gta4xl-12.1-recovery.img/download
Known issues:
* You tell me
Visit official website @ crDroid.net
DarkJoker360 Telegram Updates
crDroid Community Telegram
crDroid Updates Channel
Donations
Reserved
Is working flawlessly so far. Thanks!
But I would suggest linking the Lineage OS install Guide or update your instructions to be a little bit more detailed
Can it be installed in the 2022 version?
Terrorigel97 said:
Can it be installed in the 2022 version?
Click to expand...
Click to collapse
I don't think so, the 2022 Edition uses a Qualcomm processor instead of an Exynos.
But besides this they seem to be identical, maybe it's not to hard to make compatible version
Updated flawless from crDroid 8.11 to 9 with crDroid recovery, flashed the files from micro SD-card.
I suggest to change the link in flashing instruction to Mindthegapps.
Opengapps is not up-to-date with Gapps for Android 13.
Iceman66 said:
Updated flawless from crDroid 8.11 to 9 with crDroid recovery, flashed the files from micro SD-card.
I suggest to change the link in flashing instruction to Mindthegapps.
Opengapps is not up-to-date with Gapps for Android 13.
Click to expand...
Click to collapse
Awesome ....not looking forward to the full wipe again but will definitely update over the holiday.
please can somebody help me to install this rom? like you're telling a fool.
deerkwo said:
please can somebody help me to install this rom? like you're telling a fool.
Click to expand...
Click to collapse
You can practice with the tutorial from Lineage: https://wiki.lineageos.org/devices/gta4xlwifi/install
i tried but facing issues, can you help me by teamviewer or anydesk connection?
Iceman66 said:
Updated flawless from crDroid 8.11 to 9 with crDroid recovery, flashed the files from micro SD-card.
I suggest to change the link in flashing instruction to Mindthegapps.
Opengapps is not up-to-date with Gapps for Android 13.
Click to expand...
Click to collapse
Did you use the existing 12.1 crdroid recovery (linked in OP) or update to the latest on sourceforge?
mad4some said:
Did you use the existing 12.1 crdroid recovery (linked in OP) or update to the latest on sourceforge?
Click to expand...
Click to collapse
i used the built-in recovery in crDroid 8.11 ( A 12.1). With advanced power menu i rebooted to recovery, did a full wipe and flashed crDroid 9 and Gapps. It only took me 3 minutes to change from Android 12.1 to 13.
DarkJoker360 said:
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/13.0/README.mkdn
Flashing Instructions:
Pre-installation:
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
Before installing Android 13 based build you need to update firmware to 12 version, here is a guide on how to do it (credits to Linux4):
LTE variant: https://lineage.linux4.de/fw_update/gta4xl.html
WIFI variant: https://lineage.linux4.de/fw_update/gta4xlwifi.html
First time installation:
Use crdroid recovery
Format Data / Factory reset
Install Rom
Install gapps (Optional)
Reboot
Update installation:
Reboot to recovery
Wipe Cache
Install rom
Install gapps (Optional)
Reboot
Sources:
ROM: https://github.com/crdroidandroid
Device sources: https://github.com/tabs6lite-dev
Kernel sources: https://github.com/tabs6lite-dev/android_kernel_samsung_gta4xl
Download:
- Wifi Variant
ROM https://crdroid.net/gta4xlwifi
Changelog: https://raw.githubusercontent.com/c...ndor_crDroidOTA/13.0/changelog_gta4xlwifi.txt
crDroid recovery: https://sourceforge.net/projects/darkjoker360-developements/files/Samsung/Galaxy%20Tab%20S6%20Lite/gta4xlwifi-12.1-recovery.img/download
- LTE Variant
ROM https://crdroid.net/gta4xl
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/13.0/changelog_gta4xl.txt
crDroid recovery: https://sourceforge.net/projects/darkjoker360-developements/files/Samsung/Galaxy%20Tab%20S6%20Lite/gta4xl-12.1-recovery.img/download
Known issues:
* You tell me
Visit official website @ crDroid.net
DarkJoker360 Telegram Updates
crDroid Community Telegram
crDroid Updates Channel
Donations
Click to expand...
Click to collapse
when will you port blissrom to tab s6 lite
Is it just me or does rotation lock not work? Things will always go back to portrait mode when auto-rotate is disabled.
Edit - works after rebooting, but only until the screen is shut off again. The setting will not hold between powering the screen off/on. Very annoying.
what gapps version do you use ? no worries found it, nikgapps.
I am a little confused so hoping to get some clarifications, thanks in advance.
1. I am on lineageos 19.1(official build), so I guess I can install the crDroid recovery first, then install the crDroid ROM?
2. the gapps link in the "pre-installaton" section opens "https://opengapps.org/", but above response says it is nikgapps, so which one to use, also if opengapps, there is no version for android 12? and which variant? if nikgapps, which one to download from here(https://nikgapps.com/downloads#downloads)?
3. Is Magisk mandatory?
Thanks.
Pre-installation:
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
amazon007 said:
I am a little confused so hoping to get some clarifications, thanks in advance.
1. I am on lineageos 19.1(official build), so I guess I can install the crDroid recovery first, then install the crDroid ROM?
2. the gapps link in the "pre-installaton" section opens "https://opengapps.org/", but above response says it is nikgapps, so which one to use, also if opengapps, there is no version for android 12? and which variant? if nikgapps, which one to download from here(https://nikgapps.com/downloads#downloads)?
3. Is Magisk mandatory?
Thanks.
Pre-installation:
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
Click to expand...
Click to collapse
magisk isnt mandatory its only if you want to root and modify your system with different modules, you can download any of the nikgapps packages dependent on if you want the full google experience or bare bones.
burt35 said:
magisk isnt mandatory its only if you want to root and modify your system with different modules, you can download any of the nikgapps packages dependent on if you want the full google experience or bare bones.
Click to expand...
Click to collapse
Thank you! I was able to install smoothly. I install mindthegapps for android 13.
Though somehow even I sideloaded magisk but it is no where to be found, I guess it is ok.
Another thing is, google sent me two emails
- first email saying "new sign-in to your Google Account on a Huawei Nexus 6P device"
- second email saying "welcome to your new Pixel 5"
Not sure if this is normal.
amazon007 said:
Thank you! I was able to install smoothly. I install mindthegapps for android 13.
Though somehow even I sideloaded magisk but it is no where to be found, I guess it is ok.
Another thing is, google sent me two emails
- first email saying "new sign-in to your Google Account on a Huawei Nexus 6P device"
- second email saying "welcome to your new Pixel 5"
Not sure if this is normal.
Click to expand...
Click to collapse
install the magisk app and the emails are just verifying your device which is usually spoofed as a different device mine comes up as a nexus 6p
Just noticed there is no fast charging after installing this ROM.
I enabled fast charging in battery settings, and the power brick+usb c cable work on my pixel 6 phone as fast charging, but it shows "charging slowly" on my S6 lite.
Using Samsung fast charging brick came with S10 is same, charging slowly.