So i installed/flashed evolution x rom OSS vendor using orangefox (unchecked the unmount system thingy)without any error
my phone is decrypted so first thing i did is
wipe the cache,data,system,vendor,dalvik/art cache then
Add the evo x rom to queue then next is the DFE.zip then after succesfully flashed i reboot to system it worked and played for hours then I was planning to install magisk and pressed the reboot to recovery then the problem begun always stuck at fastboot wont boot to recovery cant even shutdown the phone always starts at fastboot.
whats the problem? or did I do anything wrong??
right now im using stock rom again but i want to use custom rom.
Mi 9t pro global latest update.
I had the same problem with other ROM. Even after flashing recovery once again my phone couldn't exit fastboot. The cause could be a damaged boot partition, but I'm not 100% certain.
hash8bits said:
So i installed/flashed evolution x rom OSS vendor using orangefox (unchecked the unmount system thingy)without any error
my phone is decrypted so first thing i did is
wipe the cache,data,system,vendor,dalvik/art cache then
Add the evo x rom to queue then next is the DFE.zip then after succesfully flashed i reboot to system it worked and played for hours then I was planning to install magisk and pressed the reboot to recovery then the problem begun always stuck at fastboot wont boot to recovery cant even shutdown the phone always starts at fastboot.
whats the problem? or did I do anything wrong??
right now im using stock rom again but i want to use custom rom.
Mi 9t pro global latest update.
Click to expand...
Click to collapse
Fast Boot Issue solved. Only tested on K20 pro
Run this you will get your twrp back by pressing vol + while booting and Boot into recovery system also working fine
fastboot flash dtbo dtbo.img
dtbo file attached below
I have problem with fingerprint.
When I use in full screen brightness its work perfectly, but when my screen on low brightness fingerprint don't recognise.
Pls help.
K20 pro
Evolution x
hash8bits said:
So i installed/flashed evolution x rom OSS vendor using orangefox (unchecked the unmount system thingy)without any error
my phone is decrypted so first thing i did is
wipe the cache,data,system,vendor,dalvik/art cache then
Add the evo x rom to queue then next is the DFE.zip then after succesfully flashed i reboot to system it worked and played for hours then I was planning to install magisk and pressed the reboot to recovery then the problem begun always stuck at fastboot wont boot to recovery cant even shutdown the phone always starts at fastboot.
whats the problem? or did I do anything wrong??
right now im using stock rom again but i want to use custom rom.
Mi 9t pro global latest update.
Click to expand...
Click to collapse
i have the exact problem, just i used twrp (3.5.2_9-0-raphael-1)
flashing dtbo doesnt do anything :/
how can I get out of bootloop? stuck at fastboot...
thank you so much
oriped said:
i have the exact problem, just i used twrp (3.5.2_9-0-raphael-1)
flashing dtbo doesnt do anything :/
how can I get out of bootloop? stuck at fastboot...
thank you so much
Click to expand...
Click to collapse
flashed the latest fastboot version from https://xiaomifirmwareupdater.com/miui/raphael to bring the phone back to life.
same problem? repeat after me:
choose a fastboot version, click download and then scroll down to the fastboot version (.tgz file type, don't get confused as the first download button is recovery version again...). extract and copy to minimal adb & fastboot. run "flash_all.bat".
phone starts with miui
softbrick, soft brick mi9 t pro, fastboot, flash stock rom, bootloop fastboot, Redmi K20 Pro, Raphael
still wondering what caused that bootloop...
Related
TL;DR - Tried to downgrade Android 10 Xiaomi EU to Android 9 Xiaomi EU, tried wiping the device (besides storage). I can get into TWRP and Fastboot, just won't boot OS.
Detailed:
I was running the latest Android 10 Xiaomi EU Stable Rom MIUI 11 (11.0.2) and wanted to downgrade because I had a few issues.
I reinstalled the last stable Android 10 Xiaomi EU Stable Rom for MIUI 10 (10.3.17) and it ran fine. I then realized that I wanted to be back on Android 9....
I went and tried to install Android 9 Xiaomi EU Stable Rom for MIUI 10 (10.3.16) and then ran into boot looping.
So then I got into TWRP and erased all data and then tried to copy over the old update file and realized I can't copy over anything even with MTP Enabled.
All the folders in the sdcard are random letters and numbers..
So now I can't send any files over and im stuck wondering how to fix this problem and then go over to Pixel Experience.
Send help! Please!
You messed up with encryptions... Just flash Chinese fastboot rom before pixel experience... and, as always, don't forget: DO NOT lock your bootloader ..
thiagodark said:
You messed up with encryptions... Just flash Chinese fastboot rom before pixel experience... and, as always, don't forget: DO NOT lock your bootloader ..
Click to expand...
Click to collapse
And I would do that by downloading which version of fastboot? Any stable one that I want to run?
Also would it be through fastboot using Mi Flash Tool or something else?
Then the pixel experience would be installed just through TWRP?
Sorry, I just don't wanna mess up.
originalwill23 said:
And I would do that by downloading which version of fastboot? Any stable one that I want to run?
Also would it be through fastboot using Mi Flash Tool or something else?
Then the pixel experience would be installed just through TWRP?
Sorry, I just don't wanna mess up.
Click to expand...
Click to collapse
As you want to flash pixel experience, you need to flash chinese fastboot rom, because pixel experience is based on Chinese firmware. So, by flashing Chinese you will be half way. Pick last stable pie version.. I believe is 10.3.16, don't remember...
Yes. You should use miflash tool, just don't forget: you need to select "clean all" and not "clean all and lock".
Boot into miui system once.
After that just flash twrp through normal fastboot command, as you already did in the past. Then flash PE in twrp...
Remember to boot in twrp just after flash it, if you boot into device it will be replaced by stock one...
thiagodark said:
As you want to flash pixel experience, you need to flash chinese fastboot rom, because pixel experience is based on Chinese firmware. So, by flashing Chinese you will be half way. Pick last stable pie version.. I believe is 10.3.16, don't remember...
Yes. You should use miflash tool, just don't forget: you need to select "clean all" and not "clean all and lock".
Boot into miui system once.
After that just flash twrp through normal fastboot command, as you already did in the past. Then flash PE in twrp...
Remember to boot in twrp just after flash it, if you boot into device it will be replaced by stock one...
Click to expand...
Click to collapse
@originalwill23
After booting into TWRP and before flashing PE, wipe cache and dalvik, then format data. Either reboot into TWRP, or unmount and mount data, then carry on with the PE flashing.
Robbo.5000 said:
@originalwill23
After booting into TWRP and before flashing PE, wipe cache and dalvik, then format data. Either reboot into TWRP, or unmount and mount data, then carry on with the PE flashing.
Click to expand...
Click to collapse
@Robbo.5000
That sounds confusing..
So after flashing the chinese fastboot and starting the phone up once to confirm its working, i boot into twrp and wipe cache+dalvik, then format all data, then restart into twrp and flash pe?
Doing that is just making sure its a clean flash and not a dirty one?
originalwill23 said:
@Robbo.5000
That sounds confusing..
So after flashing the chinese fastboot and starting the phone up once to confirm its working, i boot into twrp and wipe cache+dalvik, then format all data, then restart into twrp and flash pe?
Click to expand...
Click to collapse
You boot into MIUI once to let it finalise the installation.
Then install TWRP and immediately boot into TWRP.
When changing ROMs you should clean flash, which normally means wiping cache, dalvik and data before installing the new ROM.
In this case it's best to format data instead, otherwise you may get problems with encryption, similar to what your seeing now.
After formatting data, TWRP sometimes has a problem seeing the data partition properly, to fix this you either reboot into TWRP or go to the mount menu and unmount data, then mount it again.
After this you copy the PE ROM onto the phone and flash it.
Robbo.5000 said:
You boot into MIUI once to let it finalise the installation.
Then install TWRP and immediately boot into TWRP.
When changing ROMs you should clean flash, which normally means wiping cache, dalvik and data before installing the new ROM.
In this case it's best to format data instead, otherwise you may get problems with encryption, similar to what your seeing now.
After formatting data, TWRP sometimes has a problem seeing the data partition properly, to fix this you either reboot into TWRP or go to the mount menu and unmount data, then mount it again.
After this you copy the PE ROM onto the phone and flash it.
Click to expand...
Click to collapse
I successfully got everything up and running in PE and im loving it. Thanks!!
[SOLVED]
So, I have a xiaomi mi 8 and recently I was tryin to install a custom rom(now I understand that I should make a full wipe, but my problem is not there). I tried to install miui.eu pie version to update it to miui.eu 11 but I got a strange brick. The phone shows only boot logo, sometimes it reboots and shows me that logo again. But I cant enter recovery or fastboot. I dont know what to do.
So the solution is edl flash, if it's ARB, THERE IS NO OTHER SOLUTION
If you can't put it on recovery or fastboot then you'll have to try with edl mode, the problem is that you have to take it apart, tho I would try again fastboot and recovery a few times
The devices on boot shows Unlocked sign on the bottom of the screen? If it is boot on twrp recovery and go to Wipe Button and format data, type yes and then press enter, after that reboot to recovery and then reflash miui 11 rom and wipe data, dalvik, cache, then reboot your device and will boot to miui without any problem, i had the same problem on my mi 8 with android q miui 11 rom!
flash china rom using miflash tool,instal twrp,format data if internal shows as 0mb,direct install eu rom...
no need to wipe anything
Solved
So, the problem was the ARB system, I just found a guy that has an authorized xiaomi account and flashed via edl. There wasn't any other solution, thank you guys, this website is really user-friendly. Now I want a cool android q rom, but not sure about aosp projects(pixelexp, havoc(i get error 7, don't know why), maybe ressurection remix) or miui(such as eu, miroom, maybe masik(don't know alot about this one). I don't know(((. Anyway, thank you guys one more time))))))
Use the official and latest twrp recovery!
help i get this brick.. i just stuck On Mi logo without Unlock Text. sometime srestart but still stuck in Mi Logo Without Unlock Text. cant go to fastboot or twrp. please help me
Hello there,
I'm using the Xiaomi.eu latest Beta rom ATM. I'm trying to flash other roms (like lineage OS 17.1 for example) but it seems to reboot to fastboot everytime. I've tried doing a clean flash, formatting data, dirty flashing. Nothing seems to help it boot into the new rom.
Clearly I'm doing something wrong. If I try flashing the recommended Chinese vendor firmware (stable version), I get an error 7..but my TWRP is up to date as recommended.
If anyone has any idea where I'm going wrong, that would help a lot.
Thanks
therightperson_630 said:
Hello there,
I'm using the Xiaomi.eu latest Beta rom ATM. I'm trying to flash other roms (like lineage OS 17.1 for example) but it seems to reboot to fastboot everytime. I've tried doing a clean flash, formatting data, dirty flashing. Nothing seems to help it boot into the new rom.
Clearly I'm doing something wrong. If I try flashing the recommended Chinese vendor firmware (stable version), I get an error 7..but my TWRP is up to date as recommended.
If anyone has any idea where I'm going wrong, that would help a lot.
Thanks
Click to expand...
Click to collapse
Don't know what your doing wrong, but this is my failsafe method should nothing else work.
Flash the latest Chinese 11.0.5 fastboot ROM. Make sure you don't lock the bootloader if using the Mi Flash Tool.
Boot into MIUI once to allow it to finalise the install, you don't need to do the initial phone setup once it boots into MIUI.
Boot into fastboot and install TWRP. I recommend the latest from mauronofrio which should be 3.1.1-32
Boot immediately into TWRP. I use the volume up button while powering up the phone.
Perform a factory reset in TWRP (using the swipe button), then format data (need to type 'yes' to confirm).
Reboot into TWRP using the TWRP boot menu, this ensures the newly formatted data partition is correctly mounted.
Copy over the ROM you want and GApps if needed, then flash.
Boot into your new ROM, everything should be OK. Then boot back into TWRP to install Magisk if you want root.
Yep that seems to have done the trick. At first I was getting frustrated because I thought I was downloading the right Chinese ROM, turns out I was downloading the recovery version instead of the fastboot one.
I think it wasn't working because I was on the beta channel. Switching over to the stable channel meant I had to go through a fastboot flash apparently. I've seen this before on my OP3.
Got lineage OS loaded, thanks for your help!
I just install the custom recovery of Pixel experience on my Redminote 11 2201117tg 6/128
after i successfully install the custom recovery (base on adb log) when i boot it to recovery mode it will show the MI logo then start to fading then it will go back to fastboot mode
SGY.ken said:
I just install the custom recovery of Pixel experience on my Redminote 11 2201117tg 6/128
after i successfully install the custom recovery (base on adb log) when i boot it to recovery mode it will show the MI logo then start to fading then it will go back to fastboot mode
Click to expand...
Click to collapse
Try another TWRP/OF :https://androidfilehost.com/?w=files&flid=329301
After booting into recovery, you need to "install current recovery" or something like that. Another mistake you might have done is flashing the zip insteadof img or vice versa . I actually did that last one by mistake. There is a pretty good video guide on YouTube, look it up.
anw i already switch to Pixel Experience on RN11 but my problem now is i cannot use GCAM its alwaysnot responding and close after i open the app is there any link you can give me GCAM for PE+ RN11 tanks
has anyone tried yet fastboot flash recovery twrp.img to install twrp?
dj
My phone name and model is redmi 9c (angelica) variant..i will get straight to the point..i installed an updated version of my from 12.0.22 to 12.5.4.0 through orange fox recovery...i flashed the recovery by dirty flashing where i just cleared cache and delvik ART or something...then just flashed the whole update zip file through recovery.. everything was working and no problem then i just thought that i would open the custom recovery and it will not open and will kept itself stuck in recovery image or start image of the recovery not open or closing.. nothing worked until i thought i should just factory reset my phone but it won't factory reset itself and will get stuck on that same custom recovery logo and i had manually force it open like i did by press and holding the power button until it vibrated..it opened like normal shut down or restart...so i my phone couldn't be formatted so what i did was to download the fastboot version of my phone that i had installed and took the recovery.img file and flashed it through another phone through bugjaeger app..since i don't have a pc that all i could do and it worked the stock recovery came back and i can wipe my data if i want....but if i installed the custom recovery.img once again it won't work and will get stuck like that time so i want a solution where i can get custom recovery back again...and i gave my full story because someone might be in a similar position as me and by doing something that i did might just help them and also i want a solution to get my custom recovery back plz someone help me.....
you should know that there is a version of Pbrp Vendor R (Miui 12.5), it is the one that works but has encryption, it is unfortunate but if you have MicroSD you will have no problem installing magisk
wulan17 Custom Recovery
My Android Custom Recovery Builds
www.pling.com