Question Hello Xiaomi Mi 11 Think It Was Brick Help Me Pls - Xiaomi Mi 11

While I was trying to throw the imei, I found myself in the software 3 It was bricked 4 times. I saved it. I somehow found it by researching, but I've been crazy for 1 week. I can't find a solution anymore. Please help.
First Imeiler Deleted I Don't Know How To Bring Back It Looks Null.I'm Trying to Install Rom No matter what I do, I'm always doing a clean install from Twrp, if an error is my current mistake, but the phone turns on, then it crashes and Twrp opens. No matter what I do, the moment it boots and the desktop appears, it throws itself into Twrp. There were 2 partitions A/B in the boot. I Said I'd Fix Imei With Engineer Rom I Said I'd Fix It With Your Rom Now I Want To Do It With Your Direction And That's Why I Just Joined You. I Don't Know English So I Tried To Translate It With Translation If I Said Something Wrong Please Let Me Know What I Don't Know. Thank You In Advance And Regards. Good Forums.

Download Mi Tool V2 on your computer and use that to unbrick your phone
XiaoMiTool V2 - Download XiaoMiTool V2 for free
Downlaod XiaoMiTool V2 for free and choose the version you want
www.xiaomitool.com

Kenora_I said:
Bilgisayarınıza Mi Tool V2'yi indirip kullanın ve kullanmak için kullanmak için kullanmak için
XiaoMiTool V2 - Download XiaoMiTool V2 for free
Downlaod XiaoMiTool V2 for free and choose the version you want
www.xiaomitool.com
Click to expand...
Click to collapse
Bunu zaten tahmin edebiliyor hata veriyor ama bootloader açık kaynaklanmıyor.
I would like to add at this time, I flashed the engineering rom right now, the phone opened like that, I'm researching how to fix the imei, I couldn't find it

So you have tried to flash a full fastboot stock ROM with MiFlash?

Kenora_I said:
So you have tried to flash a full fastboot stock ROM with MiFlash?
Click to expand...
Click to collapse
yes, it gave an error again, this time it gave super flash and time out errors And as I said now, I flashed the engineering rom, it just opened, I don't know what to do, I'm very confused, I don't want to make another mistake

ByLeoo said:
yes, it gave an error again, this time it gave super flash and time out errors And as I said now, I flashed the engineering rom, it just opened, I don't know what to do, I'm very confused, I don't want to make another mistake
Click to expand...
Click to collapse
Theres no change to the boot.img?

How to flash Xiaomi firmware via Fastboot & Recovery mode
Flashing your Redmi/Mi smartphone with Xiaomi official firmware (MIUI) will help you fix certain software issues on the phone. It also helps you to get rid of root and all modifications made to your phone system software. To upgrade, update or fix minor software problems on your phone, flashing...
www.leakite.com
Follow this step by step without change and get back to me

Kenora_I said:
How to flash Xiaomi firmware via Fastboot & Recovery mode
Flashing your Redmi/Mi smartphone with Xiaomi official firmware (MIUI) will help you fix certain software issues on the phone. It also helps you to get rid of root and all modifications made to your phone system software. To upgrade, update or fix minor software problems on your phone, flashing...
www.leakite.com
Follow this step by step without change and get back to me
Click to expand...
Click to collapse
ok i'm doing and i'm back so how can i fix imei now wouldn't it be easier now that eng rom is installed? Thank you for your help

Download qcn rebuilder tool and use that

descarao81 said:
EDIT QCN
EDIT QCN
Introduction​This can be useful in case you loose your IMEI and you don't have a QCN backup to restore. Then the only option is to edit the IMEI stored in other's QCN backup to put your IMEI and restore the QCN file in your device. The most common reason for lost IMEI is selecting in QFIL the option to "Erase all before download" which erase absolutely everything when you install a ROM, QCN of course included.
0. Pre-requisites
- A QCN file. You can ask someone to share his with you or just download this "genericIMEI.qcn" file.
- "Qualcomm IMEI rebuilder" downloaded (from here) and extracted.
1. Run IMEIRebuilder.exe
2. Open the QCN file
Press the "Open file..." button, browse to select the QCN file and press "Open".
You will see random numbers loaded in IMEI1 and IMEI2
3. Edit IMEI1 and IMEI2 to put yours
4. Select "Rebuild"
Once it's done you can close the IMEI rebuilder software, re-execute it and load the edited to file to check that now it contains your IMEI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Do you have a QCN file for ur phone? Use that in that tool

Kenora_I said:
Do you have a QCN file for ur phone? Use that in that tool
Click to expand...
Click to collapse
there is, but it gave an error while taking a backup, is it defective, my qcn backup for 11

Hmm try it in the tool i posted above or find one from the internet

Kenora_I said:
Hmm try it in the tool i posted above or find one from the internet
Click to expand...
Click to collapse
I tried it with Ö tool, it gave me an error, because the file is defective, now I'm trying to create it again I will try and write right away, thank you very much for your help

ByLeoo said:
I tried it with Ö tool, it gave me an error, because the file is defective, now I'm trying to create it again I will try and write right away, thank you very much for your help
Click to expand...
Click to collapse
No problem! Good luck

Kenora_I said:
No problem! Good luck
Click to expand...
Click to collapse
thanks you bro imei now when i flash the rom

Kenora_I said:
No problem! Good luck
Click to expand...
Click to collapse
I want to ask something, now that the imei is repaired, is it okay if I install a custom rom? my friend installed oneos, it was very nice and most of the 11 problems were solved, if I install it with twrp, will the imei go back?

Sure i think, custom roms dont break IMEI...
If it does just make a backup of ur fixed qcn then just flash that if it breaks

tanks Bro ok oneos rom download ı am wait

Kenora_I said:
Sure i think, custom roms dont break IMEI...
If it does just make a backup of ur fixed qcn then just flash that if it breaks
Click to expand...
Click to collapse
sir, the rom was installed without any problems, but tell me, there is a problem, it restarts while opening and twrp enters

Son GSM said:
Hello, Is your problem bricked or lost imei? Please clarify your problem! We can help you!
View attachment 5358737
Click to expand...
Click to collapse
imei has been repaired.
The only problem now is which rom I install, when the phone starts, it restarts and twrp opens.

Related

Xiaomi Redmi 4 Prime/Pro unlock Bootloader ( Official way )

First things first.
I have too low amount of posts to post in dev sections so its there.
None of described software belongs to me. And im not responsible for damages.
!!! MI FLASH TOOL BELOW !!!
http://en.miui.com/unlock/download_en.html
Okay so me and probably others have/had problems with unlocking your Xiaomi Redmi 4 Prime.
These are simple steps to succes.
what is needed: Redmi 4 pro, ADB drivers
1. Sign to Xiaomi and apply for unlocking http://en.miui.com/unlock/
It is important to add correct data.
2. Connect to your Mi account on the device and enable Find Device option under Xaiomi cloud
if it is done correctly u will be able to find ur device at https://i.mi.com/
3 Wait for permission u will receive SMS message.
4. When permission is aquired and device is connected to Mi Cloud we have to try to unlock the device.
5 . Download Mi Unlock software ( added to post up there )
6 .Enable developer settings
System info -> couple of clicks on MiUi version
Back - > more settings -> developer settings - > Enable OEM unlock
7. Reboot to fastboot ( Vol down + power ) till some (russian?) bunny appears
8. Perform unlock from Mi Unlocker and press
Left button
enter Login(email) and password to mi account
Connect the phone and press the button !
9 Reboot. You should be done Congrats !
You can install miui global now or any other rom. to Perform you have to :
1. Boot to fastboot
2.Download Brigudav Recovery https://forum.xda-developers.com/redmi-4-prime/development/recovery-twrp-3-1-1-2-brigudav-t3656372
3.connect the phone
4. in console window type: fastboot flash recovery RECOVERYNAME.img
5.Boot to recovery and install the rom
Happy flashing !
Hard brick ?
Thanks to Butcher33 solution !
butcher33 said:
this video
https://www.youtube.com/watch?v=j27x5iJSS40
solved the day! Big thanks to the author!
Click to expand...
Click to collapse
Can i unlock with fake roms in my phone??
I have miui 8.0.5.0.0(MBECNDG)
Immanuelwijaya said:
Can i unlock with fake roms in my phone??
I have miui 8.0.5.0.0(MBECNDG)
Click to expand...
Click to collapse
I dont know but if you have installed non original rom isnt ur phone already unlocked?
Probably you can unlock your phone just make an application you can probably check the bootloader state from fastboot by
Code:
fastboot oem device-info
in fastboot mode
sigma119 said:
I dont know but if you have installed non original rom isnt ur phone already unlocked?
Probably you can unlock your phone just make an application you can probably check the bootloader state from fastboot by
Code:
fastboot oem device-info
in fastboot mode
Click to expand...
Click to collapse
I mean. Vendor rom. That have installed since i got the phone
Immanuelwijaya said:
I mean. Vendor rom. That have installed since i got the phone
Click to expand...
Click to collapse
Ofcourse you can but as i say so if u want to keep ur warranty u have to apply to them at unlock link that i posted, thought ive heard that its best to send them phones with miui when something got broken
Immanuelwijaya said:
Can i unlock with fake roms in my phone??
I have miui 8.0.5.0.0(MBECNDG)
Click to expand...
Click to collapse
You can't!!!
You need to flash a official China Stable 8.0.5.0 ROM to unlock - tried it with different phones and methods...
I have not activated the "find device" and is still unlocked.
Hi
I have recently purchased a Redmi 4 Prime phone that came with the vendor rom and I wanted to flash the latest china dev rom, but am stuck in bootloop. cant enter DL mode, but fastboot is OK. unfortunately none of the adb commads work, the phone is recognized under "fastboot devices" but not under "adb devices". I have tried the fastboot2edl v2 method but is goes straight into bootloop. can you please suggest what to do and help me out?
butcher33 said:
Hi
I have recently purchased a Redmi 4 Prime phone that came with the vendor rom and I wanted to flash the latest china dev rom, but am stuck in bootloop. cant enter DL mode, but fastboot is OK. unfortunately none of the adb commads work, the phone is recognized under "fastboot devices" but not under "adb devices". I have tried the fastboot2edl v2 method but is goes straight into bootloop. can you please suggest what to do and help me out?
Click to expand...
Click to collapse
Try to turn it off and press volume down + up and power until the LED flashes red and connect USB - it should be recognized as Qualcomm ******
If not, then build your own deep flash cable or order one on ebay or something... - with that u can reach the DL mode on nearly every Qualcomm device
this video
https://www.youtube.com/watch?v=j27x5iJSS40
solved the day! Big thanks to the author!
Finally got my unlock permission and I think I did everything correctly but I still get this error msg :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And trying with the older unlocker linked in this thread:
BrutalGreen said:
Finally got my unlock permission and I think I did everything correctly but I still get this error msg :crying:
And trying with the older unlocker linked in this thread:
Click to expand...
Click to collapse
Me too,
A bad luck guy, same situation
I just applied yesterday, waiting for permission to unlock.
coolpixs4 said:
Me too,
A bad luck guy, same situation
Click to expand...
Click to collapse
Flashed the Developer Preview Rom and it worked
usually the issue with unlock is a different username used to login. use the same, either email, number or name on both.
should solve it.
Can anyone translate this to English?
http://4pda.ru/forum/index.php?showtopic=721838&st=8200#entry56100951
Could make it easier to flash a new ROM
11 days ago I apply for the bootloader unlock.
I'm in trouble. I want to install an unofficial rom and this says mi.
Then use unofficial unlock.
Rafudus said:
11 days ago I apply for the bootloader unlock.
I'm in trouble. I want to install an unofficial rom and this says mi.
Click to expand...
Click to collapse
coolpixs4 said:
Me too,
A bad luck guy, same situation
Click to expand...
Click to collapse
well did u synced with mi cloud and enabled find then watched if its available in i.mi.com?
BrutalGreen said:
Finally got my unlock permission and I think I did everything correctly but I still get this error msg :crying:
And trying with the older unlocker linked in this thread:
Click to expand...
Click to collapse
try to make another account maybe, what did u wrote to them ? i was applying with " i want to install miui global" or something had no problems
kentaurest said:
Then use unofficial unlock.
Click to expand...
Click to collapse
I can't because unnofficial roms need official unlock...
sigma119 said:
well did u synced with mi cloud and enabled find then watched if its available in i.mi.com?
try to make another account maybe, what did u wrote to them ? i was applying with " i want to install miui global" or something had no problems
Click to expand...
Click to collapse
Yes i have it synced... I think that my fault was the reason of the applying... I wrote a copy paste one...
The thing is that i have to wait for the next month or i have to make another account?! :crying:

Bricked phone.

Hello, i was given a blu R1 HD prime phone that was bricked by one of my relatives, according to him, he tried to do a format all + download on this phone, which as far as im aware, is a death flag, so i have here this bricked phone, i installed mrmazak's prime 6.1 no nv.zip file on this phone, but it still gives me the TOOL DL IMAGE FAIL, error i've heard a lot about, i also saw him saying "THIS IS NOT THE PACKAGE YOU NEED" in which case i can do nothing but ask, whats the correct package to get this bad boy up and running again? thanks beforehand.
PS: The phone is 8gb/1gb ram ver. was on ver 6.1, amazon before the brick, no OTA's.
Shinnazuka0411 said:
Hello, i was given a blu R1 HD prime phone that was bricked by one of my relatives, according to him, he tried to do a format all + download on this phone, which as far as im aware, is a death flag, so i have here this bricked phone, i installed mrmazak's prime 6.1 no nv.zip file on this phone, but it still gives me the TOOL DL IMAGE FAIL, error i've heard a lot about, i also saw him saying "THIS IS NOT THE PACKAGE YOU NEED" in which case i can do nothing but ask, whats the correct package to get this bad boy up and running again? thanks beforehand.
PS: The phone is 8gb/1gb ram ver. was on ver 6.1, amazon before the brick, no OTA's.
Click to expand...
Click to collapse
For a device that was format all. Will need more partitions than are in that package you tried. Also I have tried to work with someone else who had the 8gb size device, we could not get past that error.
I do recall that the last last person got a new board for his phone and pulled the images from it to share. There is a link in the main thread somewhere. But , well even when he tried to restore his own backup from good device to the one with do error, it did not work.
NVM
I remembered it wrong. He tried to pull it, but could not do it.
Look through this thread. Maybe you can try to follow the advice I gave him, and it may work for you.
https://forum.xda-developers.com/r1...-blu-r1-hd-t3440261/post76482224#post76482224
Well, from this mess in english, i can kind of attempt to understand that he tried to install v17 backup, and it didnt work due to the PMT CHANGED FOR THIS ROM, then he somewhere got a .bin backup for miracle?, and then silence, i dont know what else you tried suggesting to him since his english was so bad, i cant follow the steps, on another note, got that .bin backup? maybe ill try flashing it with miracle tool and praying that it'll work. Also, which V17 should i use, NVRAM or NONV
Shinnazuka0411 said:
Well, from this mess in english, i can kind of attempt to understand that he tried to install v17 backup, and it didnt work due to the PMT CHANGED FOR THIS ROM, then he somewhere got a .bin backup for miracle?, and then silence, i dont know what else you tried suggesting to him since his english was so bad, i cant follow the steps, on another note, got that .bin backup? maybe ill try flashing it with miracle tool and praying that it'll work. Also, which V17 should i use, NVRAM or NONV
Click to expand...
Click to collapse
There is now a "repair rom" listed in an mtk support group I try to follow. I have not checked it out yet, but maybe it will help. Let me open this on PC to search for the link
this one was labled v6.4 firmware http://www.mediafire.com/file/6kys9896445l5sm/SP_Flash_Tool_BLU_R0010UU_V6.4_Firmware.zip/file
this is labled as a repair firmware http://www.mediafire.com/file/il54pxuvpkargtr/BLU_R1_HD_R0030UU_REPAIR_MT6735.rar/file
I would have you look at those , first i suppose.
if it does not work I do have backups made from miricle-box, but they are not uploaded anywhere right now.
Real appreciated, will keep you updated, if anything works ill post it here.
Alright, i tried the 6.4 rom, it didnt work, i had it already, i also tried to install the "repair firmware" but in the v5.1628.00.000 version of my SPFT it shows me "SP FLASH TOOL ERROR: (8417) THE LOAD SCATTER FILE IS INVALID", then i try on another version (v5.1744 & v5.1804), then tells me STATUS_SCATTER_FILE_INVALID (0xC00300001), i tried the fix copypasting the hashtags and general settings on top for both cases but that didnt work, i noticed the scatter file looks really weird, not like most of the ones posted here or elsewhere, its just a bunch of rows and not organized in the slightest, maybe i need to try using the scatter for my 8gb/1gb ram? since R0030UU is the 16gb/2gb ram's model code
---------------------------------------------------------------------------------------------------------------------------------------------------------------EDIT: Tried mixed and matching the every file from the MT6735 repair firmware with the ones it didnt have from the prime 6.1 rom whilist using said 6.1 scatter, still on TOOL DL IMAGE FAIL
Shinnazuka0411 said:
Alright, i tried the 6.4 rom, it didnt work, i had it already, i also tried to install the "repair firmware" but in the v5.1628.00.000 version of my SPFT it shows me "SP FLASH TOOL ERROR: (8417) THE LOAD SCATTER FILE IS INVALID", then i try on another version (v5.1744 & v5.1804), then tells me STATUS_SCATTER_FILE_INVALID (0xC00300001), i tried the fix copypasting the hashtags and general settings on top for both cases but that didnt work, i noticed the scatter file looks really weird, not like most of the ones posted here or elsewhere, its just a bunch of rows and not organized in the slightest, maybe i need to try using the scatter for my 8gb/1gb ram? since R0030UU is the 16gb/2gb ram's model code
---------------------------------------------------------------------------------------------------------------------------------------------------------------EDIT: Tried mixed and matching the every file from the MT6735 repair firmware with the ones it didnt have from the prime 6.1 rom whilist using said 6.1 scatter, still on TOOL DL IMAGE FAIL
Click to expand...
Click to collapse
all I can do is share the backup from miricle-box that I have.
https://www.androidfilehost.com/?fid=5862345805528042536
Just trying to catch up, so bricked phone that wont format correct? Do you have twrp on it?
mrmazak said:
all I can do is share the backup from miricle-box that I have.
androidfilehost/?fid=5862345805528042536
Click to expand...
Click to collapse
Hi, this work on BLU R0030UU 2GB/16GB or R0010UU??
TavoStyle said:
Hi, this work on BLU R0030UU 2GB/16GB or R0010UU??
Click to expand...
Click to collapse
This is from 16gb so the R0030uu
mrmazak said:
This is from 16gb so the R0030uu
Click to expand...
Click to collapse
Hi!, I am from Venezuela, I apologize for my English, I am using the Google translator ...
I tried to put the software but the following error appears
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TavoStyle said:
Hi!, I am from Venezuela, I apologize for my English, I am using the Google translator ...
I tried to put the software but the following error appears
Click to expand...
Click to collapse
Hello,
two issues.
first, the backup has scatter file formatted for use in miracle box, not sp flash tool.
next, The preloader on any updated phone has been changed and does not work to flash anymore.
So, what is / was version on your phone , so I can know if it should be able to work or not?
\
mrmazak said:
Hello,
two issues.
first, the backup has scatter file formatted for use in miracle box, not sp flash tool.
next, The preloader on any updated phone has been changed and does not work to flash anymore.
So, what is / was version on your phone , so I can know if it should be able to work or not?
\
Click to expand...
Click to collapse
First: If I use Miracle Box Crack 2.27A, can it work? (Would I have to disconnect and connect the battery to start the phone again?)
Next: I unchecked the Preloader because once I leave a brick as a phone to leave marked that option
Version: (Screen OLD, Now is in BLU Screen) (Ohhh I never UPDATE the software, I never use ROOT, I never use debloat...)
TavoStyle said:
First: If I use Miracle Box Crack 2.27A, can it work? (Would I have to disconnect and connect the battery to start the phone again?)
Next: I unchecked the Preloader because once I leave a brick as a phone to leave marked that option
Version: (Screen OLD, Now is in BLU Screen) (Ohhh I never UPDATE the software, I never use ROOT, I never use debloat...)
Click to expand...
Click to collapse
Most important part (custom build number) is missing from screen shot.
mrmazak said:
Most important part (custom build number) is missing from screen shot.
Click to expand...
Click to collapse
I just discovered something very crazy, I do not understand anything
In the recovery logs...
https://youtu.be/-sMubZoduig
TavoStyle said:
I just discovered something very crazy, I do not understand anything
In the recovery logs...
https://youtu.be/-sMubZoduig
Click to expand...
Click to collapse
so your build number is 6.6
you may be able to unlock.
But is phone still alive?
mrmazak said:
so your build number is 6.6
you may be able to unlock.
But is phone still alive?
Click to expand...
Click to collapse
My phone is stuck in the BLU logo
TavoStyle said:
My phone is stuck in the BLU logo
Click to expand...
Click to collapse
if it is still locked bootloader, and stock recovery fails to wipe data and / or cache. I do not have idea how to fix.\
Bricked BLU R1 HD
mrmazak said:
if it is still locked bootloader, and stock recovery fails to wipe data and / or cache. I do not have idea how to fix.\
Click to expand...
Click to collapse
Hi Mr Mazak
I had purchased non prime version of BLU R1 HD. I updated to the latest version via OTA. I had my phone rooted with super su and now wanted to try Magisk. After the reboot I had reinstalled the twrp recovery and did a format of all data on my phone. I am trying to install twrp but when I power on my device it is stuck on the boot loading screen. I have tried hold power button and volume down simultaneously and it reboots but gets stuck on the logo.
I tried using the sp flash tool to restore my phone to stock but it did not work. Get error S_BROM_DOWNLOAD_FAIL. 7d
My bootloader is unlocked.
Tried using adb commands but when I connect to the phone and run adb commands it says no authorisation.
If I can install twrp on the device then I will be able to install the rom from rootjunky, not sure if you require more info.
Awaiting your ananlys
Kind Regards
ismailf007 said:
Hi Mr Mazak
I had purchased non prime version of BLU R1 HD. I updated to the latest version via OTA.
Click to expand...
Click to collapse
The latest ota blocks the use of sp flash tool. And the kernel exploit used previouls. But now there is new exploit. But you cannot boot so that is mutt point now
ismailf007 said:
I had my phone rooted with super su and now wanted to try Magisk. After the reboot I had reinstalled the twrp recovery and did a format of all data on my phone.
Click to expand...
Click to collapse
Did you only format the data partition or whole device.?
ismailf007 said:
I am trying to install twrp but when I power on my device it is stuck on the boot loading screen.
Click to expand...
Click to collapse
This confuses me. You just said you had twrp already. Now you have trouble to I stall it.
ismailf007 said:
I have tried hold power button and volume down simultaneously and it reboots but gets stuck on the logo.
Click to expand...
Click to collapse
Did you use / try volume up?
ismailf007 said:
I tried using the sp flash tool to restore my phone to stock but it did not work. Get error S_BROM_DOWNLOAD_FAIL. 7d
My bootloader is unlocked.
Click to expand...
Click to collapse
From what you say.
1. You had working phone with SU root.
2. You have twrp installed
3. You wiped / formated with twrp
4. You now only boot to a logo screen. No recovery, or bootloader?

Note 9 imei unknown and baseband unknown

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Some one help me plz my note 9 imei 1 and imei 2 is unknown and baseband also unknown...
I tried flash stock rom again and didn't work
And also do factory reset not work
And my spen remote cant connect to my note9
Plz someone help me plz
No need to make a new thread. There were people helping you in the thread you made about this yesterday.
Mr. Orange 645 said:
No need to make a new thread. There were people helping you in the thread you made about this yesterday.
Click to expand...
Click to collapse
THE previous thread my probleme i stuck in bootloop even if i flash stock or factory binray but i found a solution and fixed bootloop
but now i dont have imei 1 or imei 2 is unknown
and baseband for device is unknown
and the spen remote is connecting and dont connect to my note 9
so you initially failed to do something first and this got you in the state you are in.(what did u do?)
strike 1.
then you also failed at restoring from a backup.( by restoring your twrp backup that should at least have EFS partition saved if not all of them)( but you probably didint back up anything)
strike 2.
now, when you flash stock i don't think you actualy flashed anything and failed at that too.
strike 3.
so i belive the issue is reading and then understanding it.
no efforts from anyone in the forums can fix that. only you can.
so read up on:
what type/model of phone you have.
what OEM unlock is.
what version/model of firmware it supports.
how different versions of odin exsist to flash firmware.
how to use odin and fill up the proper slots.
where to download rhe correct stock firmware.
how to properly flash twrp and wipe/format to prepare phone
how to use twrp for backuping and flashing.
how magisk is required to boot a twrp/rooted phone ( prolly your bootloop issue originally)
once all of the above is mastered then all your problems will vanish.
good luck on the literature
(btw from looking at the pictures your modem(CP) or part of the EFS partition has a missing file(s). anyways nothing flashing the correct stock firmware can't fix)
and spen is bound to phones imei. so in this case spen will connect again once you fix by restoring stock properly.
and since I'm such in a good mood,if you properly went through all the steps explained before and REALLY restored stock and also if you are rooted find a way to open:
efs/imei/mps_code.dat
if you get an error while opening it just copy to sd card and open it from there.
bober10113 said:
and since I'm such in a good mood,if you properly went through all the steps explained before and REALLY restored stock and also if you are rooted find a way to open:
efs/imei/mps_code.dat
if you get an error while opening it just copy to sd card and open it from there.
Click to expand...
Click to collapse
I mastered everything you say otherwise i wont able to restore my note 9 from bootloop invalid efs argument error
But the thing i am facing right now is that my imei 1 an imei 2 and baseband in unknown state
Am i able to fix this without root or twrp recovery i try to fix it using adb but no such file or dictionary found
Can you give me a solution to fix imei plz (with or without root)
bober10113 said:
and since I'm such in a good mood,if you properly went through all the steps explained before and REALLY restored stock and also if you are rooted find a way to open:
efs/imei/mps_code.dat
if you get an error while opening it just copy to sd card and open it from there.
Click to expand...
Click to collapse
What should i do after i get to efs/imei/mps_code.dat
In order to fix imei and baseband
devil499 said:
What should i do after i get to efs/imei/mps_code.dat
In order to fix imei and baseband
Click to expand...
Click to collapse
did you ever root or install twrp?
bober10113 said:
did you ever root or install twrp?
Click to expand...
Click to collapse
No root and no twrp
devil499 said:
No root and no twrp
Click to expand...
Click to collapse
then please explain how you got yourself into this problem?
bober10113 said:
then please explain how you got yourself into this problem?
Click to expand...
Click to collapse
I DID dactory reset to my note 9 after that the phone booted up and the imei 1 and 2 and baseband is unknown
then i managed to solve the probleme after i serch the internet i fout a tool named sam fix tool
the tool got a baseband fix
i run the baseband fix from the tool then the phone goes to download mode and flash something
after that the phone stuck in bootloop
i try to flash factory combination but no luck still bootloop
i got back to stock rom and go into recovery i found that invaild efs argumant error in recovery
i tried everything in order to get the phone boot up again
i was able to boot it up again but the imei 1 and 2 still unknown same as baseband
i try adb command to get the efs fix but error no such dictionary
the only way i have is to root and try to fix efs using twrp terminal but i dont want to root my phone i dont want to tirp knox
plz is there any way to get my imei 1 and 2 and baseband fixed
factory resets dont wipe efs. so i dont know what acctualy happened but it dosent make sense.
anyways good luck
devil499 said:
I DID dactory reset to my note 9 after that the phone booted up and the imei 1 and 2 and baseband is unknown
then i managed to solve the probleme after i serch the internet i fout a tool named sam fix tool
the tool got a baseband fix
i run the baseband fix from the tool then the phone goes to download mode and flash something
after that the phone stuck in bootloop
i try to flash factory combination but no luck still bootloop
i got back to stock rom and go into recovery i found that invaild efs argumant error in recovery
i tried everything in order to get the phone boot up again
i was able to boot it up again but the imei 1 and 2 still unknown same as baseband
i try adb command to get the efs fix but error no such dictionary
the only way i have is to root and try to fix efs using twrp terminal but i dont want to root my phone i dont want to tirp knox
plz is there any way to get my imei 1 and 2 and baseband fixed
Click to expand...
Click to collapse
Since you haven't rooted or flashed any other firmware why don't you approach Samsung support? Tell them I tried to factory reset and since then it was like this.
devil499 said:
I DID dactory reset to my note 9 after that the phone booted up and the imei 1 and 2 and baseband is unknown
then i managed to solve the probleme after i serch the internet i fout a tool named sam fix tool
the tool got a baseband fix
i run the baseband fix from the tool then the phone goes to download mode and flash something
after that the phone stuck in bootloop
i try to flash factory combination but no luck still bootloop
i got back to stock rom and go into recovery i found that invaild efs argumant error in recovery
i tried everything in order to get the phone boot up again
i was able to boot it up again but the imei 1 and 2 still unknown same as baseband
i try adb command to get the efs fix but error no such dictionary
the only way i have is to root and try to fix efs using twrp terminal but i dont want to root my phone i dont want to tirp knox
plz is there any way to get my imei 1 and 2 and baseband fixed
Click to expand...
Click to collapse
Hi, I had the same problem and managed to sort it out. Find your service provider firmware on Sammobile and download it with Sam firm, extract it and load I'm Odin all necessary files and good to go. After that you can flash with Odin android pie straight on your note 9. Let me know if you still need any help. Good luck.
I also have same issue on my note 9 due to sam fix tool
maybe they should call it the sam break tool.
where is the file located again?
id be curious to study it
Usually its a modem issue when that happens. Perhaps find the right modem for your device and use Odin. It used to happen to me when I flashed international ROMs on my n910t . I would have to flash my models modem and it goes back to normal.
bober10113 said:
so you initially failed to do something first and this got you in the state you are in.(what did u do?)
strike 1.
then you also failed at restoring from a backup.( by restoring your twrp backup that should at least have EFS partition saved if not all of them)( but you probably didint back up anything)
strike 2.
now, when you flash stock i don't think you actualy flashed anything and failed at that too.
strike 3.
so i belive the issue is reading and then understanding it.
no efforts from anyone in the forums can fix that. only you can.
so read up on:
what type/model of phone you have.
what OEM unlock is.
what version/model of firmware it supports.
how different versions of odin exsist to flash firmware.
how to use odin and fill up the proper slots.
where to download rhe correct stock firmware.
how to properly flash twrp and wipe/format to prepare phone
how to use twrp for backuping and flashing.
how magisk is required to boot a twrp/rooted phone ( prolly your bootloop issue originally)
once all of the above is mastered then all your problems will vanish.
good luck on the literature
(btw from looking at the pictures your modem(CP) or part of the EFS partition has a missing file(s). anyways nothing flashing the correct stock firmware can't fix)
and spen is bound to phones imei. so in this case spen will connect again once you fix by restoring stock properly.
Click to expand...
Click to collapse
Note 9 (atleast USA models) I thought couldnt flash TWRP. Unless you're in binary but not even sure if that works. Also it cant be oem unlocked. However in Binary of course. Is the S pen really bound to IMEI? My IMEI number is 000000000000000. Which it obviously was not that a day ago but my S pen still works as it should. Let me be a hypocrite but less filler rambling. I'm hurting for this answer as well.
---------- Post added at 04:43 AM ---------- Previous post was at 04:40 AM ----------
If curiosity is your game I was stupid as no other and figured going into binary was the best way to get a new IMEI to a rumored black listed note I got on the low low. Erase EFS 1/2/3 without backing up. I'll take a bow for being stellar. Come to find out after the damage was done. The IMEI was completely clean and I just needed to switch service.

[GUIDE] Unlock bootloader of Lenovo Tab 4 10 with OEM unlock "greyed out" (TB-X304F/L and other Qcom tablets)

WARNING: DO THIS AT YOUR OWN RISK !!!!
I AM NOT RESPONSIBLE IF YOU START CRYING INTO YOUR BRICKED TABLET
This guide is only for devices with "OEM Unlocking" option greyed out !!!
Others can follow the simpler procedure mentioned in the TWRP thread...
Prerequisites:
QDLoader_HS_USB_Driver (Google it and find)
Hex Editor (eg. HxD)
PC and some brain to understand....
Procedure:
Install the drivers and hex editor.
Clone this repo to PC - https://github.com/Naveen3Singh/BLUnlocker (Thanks to the dev )
Extract the firehose file from stock rom. (eg. "prog_emmc_firehose_8917_ddr.mbn" for TB-X304)
Boot into edl mode using key combo
or using adb
Code:
adb reboot edl
Check the port number in device manager and run " dump_devinfo.bat ".
Mention port number and full path to "*.mbn" file (eg. D:\where\every\it\is\prog_emmc_firehose_8917_ddr.mbn)
A file named " devinfo.img " will be dumped to the working dir. Edit it using an HEX editor as shown below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Save the devinfo.img after editing and run " unlock.bat "
Reboot after success message.
Voila !! You have Successful unlocked the bootloader. Reboot to system by holding the power button.
EDIT (13/01/2020): After unlocking bootloader and restarting, if it asks for password, Reboot to recovery and format data...
Flash TWRP and Enjoy rooting...
PS: The same procedure can be done using QFIL tools (QPST)
Attached:
Firehose file of TB-X304F and TB-X304L (DONT USE ON OTHER DEVICES!!!)
Credits:
Thanks to the dev who wrote the code ( https://github.com/Naveen3Singh )
@hk96 (Myself)
Hit thanks if this helped....
Reserved !!!
Thank you very much! It worked perfectly!
Firehose file for X304L if anyone needs it
Hb20032003 said:
Thank you very much! It worked perfectly!
Click to expand...
Click to collapse
Great! I also have this problem...
Does unlocking in this way factory resets the tablet?
Is the "firehose" file version sensitive (i.e., if I use the S001016 file in a S001014 TB-X304F will I have any kind of trouble?)
Thanks!
njascgil said:
Great! I also have this problem...
Does unlocking in this way factory resets the tablet?
Is the "firehose" file version sensitive (i.e., if I use the S001016 file in a S001014 TB-X304F will I have any kind of trouble?)
Thanks!
Click to expand...
Click to collapse
After unlocking, when u Boot into system it asks for a password, even if u didn't set one to start with (atleast in my case).
So you need Boot into recovery and wipe data.
Short answer: yes, factory reset is necessary.
Regarding file version, I hav no idea... May be u can give it a try...
Hb20032003 said:
Firehose file for X304L if anyone needs it
Click to expand...
Click to collapse
Thanks...
Let me add this to OP, so that it is easier for others.
Can you please make a video tutorial? i am new to rooting and am unable to understand the instructions properly.
Chhayank_Sharma said:
Can you please make a video tutorial? i am new to rooting and am unable to understand the instructions properly.
Click to expand...
Click to collapse
May do it when i find time....
But there are many videos on the same procedure for other Qcom phones, you can get some hint from that.
If you are very new to this, i suggest you not to do, unless your are confident.
hk96 said:
May do it when i find time....
But there are many videos on the same procedure for other Qcom phones, you can get some hint from that.
If you are very new to this, i suggest you not to do, unless your are confident.
Click to expand...
Click to collapse
ok thanks.
hk96 said:
Regarding file version, I hav no idea... May be u can give it a try...
Click to expand...
Click to collapse
I was going to try it, but it's my daughter's tablet and she didn't let me do it... She is afraid of loosing some games' progress...
Nothing work for me
Eagle-no1 said:
Nothing work for me
Click to expand...
Click to collapse
May be you would have missed something....
This seems to work for most people.
hk96 said:
May be you would have missed something....
This seems to work for most people.
Click to expand...
Click to collapse
I got to work now, I had an old bad cable in use. Thank you.
hk96 said:
PS: The same procedure can be done using QFIL tools (QPST)
Click to expand...
Click to collapse
How? I watched a video and I can load the mbn but I don't know what to put in the xml thing box. I tried doing the method steps but it says Failed to write hello response back to device Did not receive Sahara hello packet from device
Nevermind I got it. As you can see by my signature I haven't done anything like this in many years.
Jakeup96 said:
Nevermind I got it. As you can see by my signature I haven't done anything like this in many years.
Click to expand...
Click to collapse
could you explain how you did it pleasssee
Jakeup96 said:
Nevermind I got it. As you can see by my signature I haven't done anything like this in many years.
Click to expand...
Click to collapse
Haha... Everything happens gradually...
rustyrust said:
could you explain how you did it pleasssee
Click to expand...
Click to collapse
I think, the instructions are crisp and clear as possible...
Can u tell where u got stuck ??
Work! You're GENIUS
hello,
I already root some device but here I'm stuck because I don't find the port number in device manager :-( drivers installed and "lenovo tab4 10" displayed in device manager. in properties I have : port_#0002.hub_#0005
I tried use 0002 or 0005 as port number but the .bat script failed each time. do I have correct port number ?
[EDIT] I have "failed to write hello response back to device" message and my tablet is in FFBM Mode.
[EDIT] in FFBM mode, my device is recognized in device manager (but i'm not sure to find the correct port and the script don't work) and in FastBoot Mode (first menu), my device seems to be not recognized in device manager. I guess that the script must be launched in this mode but I miss a driver. I install "adb drivers" + QDLoader-HS-USB_Driver_64bit_Setup drivers. What do I miss ?

REDMI NOTE 9 IMEI INVALID/NULL

I tried to install twrp recovery in my redmi note 9 (merlin) then I lost my device I got hardbrick then i tried to recover unfortunately I formated my via sp flash tool now my mobile is back to life but I have lost Imei only SIM 1 working but UM not able to call with sim1 ND SIM 2 is not working can someone help me?
Since your device is MTK there are multiple ways to change your IMEI.
You can follow this guide to change your device IMEI back to original. (Changing IMEI to a different value than the default IMEI your device came with is illegal in most countries)
If you hate the technical stuff you can use this guide instead, it claims to be able to change the IMEI back to default value automatically by using baseband. Here is a video guide.
It's untested though so use it on your own risk.
Hope I helped.
XDHx86 said:
Since your device is MTK there are multiple ways to change your IMEI.
You can follow this guide to change your device IMEI back to original. (Changing IMEI to a different value than the default IMEI your device came with is illegal in most countries)
If you hate the technical stuff you can use this guide instead, it claims to be able to change the IMEI back to default value automatically by using baseband. Here is a video guide.
It's untested though so use it on your own risk.
Hope I helped.
Click to expand...
Click to collapse
XDHx86 said:
Since your device is MTK there are multiple ways to change your IMEI.
You can follow this guide to change your device IMEI back to original. (Changing IMEI to a different value than the default IMEI your device came with is illegal in most countries)
If you hate the technical stuff you can use this guide instead, it claims to be able to change the IMEI back to default value automatically by using baseband. Here is a video guide.
It's untested though so use it on your own risk.
Hope I helped.
Click to expand...
Click to collapse
can I recover wifi nvram error...? Via meta tool?
Shah65367 said:
can I recover wifi nvram error...? Via meta tool?
Click to expand...
Click to collapse
How to fix "NVRAM WARNING: Err = 0x10" error permanently.
Telegram Channel: t.me/xiaomiengs THIS TUTORIAL ONLY FOR XIAOMI DEVICES ONLY! (if you have nvram and nvdata backup, just restore it - will fix this issue) Requirements: Computer USB cable Engineering ROM for your device, download here Stock ROM for your device, download here 1. Install...
telegra.ph
This works for NVRAM issue
Communos said:
How to fix "NVRAM WARNING: Err = 0x10" error permanently.
Telegram Channel: t.me/xiaomiengs THIS TUTORIAL ONLY FOR XIAOMI DEVICES ONLY! (if you have nvram and nvdata backup, just restore it - will fix this issue) Requirements: Computer USB cable Engineering ROM for your device, download here Stock ROM for your device, download here 1. Install...
telegra.ph
This works for NVRAM issue
Click to expand...
Click to collapse
LINK IS NOT WORKING
Shah65367 said:
LINK IS NOT WORKING
Click to expand...
Click to collapse
You can follow this thread to fix this problem. (Literally first google result)
Shah65367 said:
can I recover wifi nvram error...? Via meta tool?
Click to expand...
Click to collapse
You can follow this thread to fix this problem. (Literally first google result)
XDHx86 said:
Since your device is MTK there are multiple ways to change your IMEI.
You can follow this guide to change your device IMEI back to original. (Changing IMEI to a different value than the default IMEI your device came with is illegal in most countries)
If you hate the technical stuff you can use this guide instead, it claims to be able to change the IMEI back to default value automatically by using baseband. Here is a video guide.
It's untested though so use it on your own risk.
Hope I helped.
Click to expand...
Click to collapse
link is not working why?
Shah65367 said:
link is not working why?
Click to expand...
Click to collapse
It requires hydra dongle https://www.hydra-dongle.com
PLZ TELL ME WITHOUT DONGLE ITS NOT POSSIBLE...? IS THERE ANY CRACK TOOL? I DONT HAVE MONEY I WANNA REPAIR FREE OF COST
Shah65367 said:
PLZ TELL ME WITHOUT DONGLE ITS NOT POSSIBLE...? IS THERE ANY CRACK TOOL? I DONT HAVE MONEY I WANNA REPAIR FREE OF COST
Click to expand...
Click to collapse
You can repair only imei for slot2 by yourself.
Only Xiaomi Centre can recover imei for slot1.
If you want to recover the imei for slot2, just follow this step:
1. Flash the ENGINEERING ROM: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4227933/
2. Enter in META MODE using MODEM META: https://androidmtk.com/download-modemmeta-tool
3. Write IMEI for slot2 and keep blank/null for slot1.
4. Flash any other MIUI (or custom) ROM you want.
5. Backup NVDATA if you want to restore IMEI after.
Done.
VD171 said:
You can repair only imei for slot2 by yourself.
Only Xiaomi Centre can recover imei for slot1.
If you want to recover the imei for slot2, just follow this step:
1. Flash the ENGINEERING ROM: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4227933/
2. Enter in META MODE using MODEM META: https://androidmtk.com/download-modemmeta-tool
3. Write IMEI for slot2 and keep blank/null for slot1.
4. Flash any other MIUI (or custom) ROM you want.
5. Backup NVDATA if you want to restore IMEI after.
Done.
Click to expand...
Click to collapse
JUST TELL ME LAST THING...IF I DO NOT FLASH ENGINEERING ROM THEN I CANNOT
Shah65367 said:
JUST TELL ME LAST THING...IF I DO NOT FLASH ENGINEERING ROM THEN I CANNOT
Click to expand...
Click to collapse
No. Because that the step 1 is "Flash the ENGINEERING ROM".
Meta mode is not allowed on release versions.
VD171 said:
No. Because that the step 1 is "Flash the ENGINEERING ROM".
Meta mode is not allowed on release versions.
Click to expand...
Click to collapse
H0W T0 BACK UP NVRAM DATA ND HOW TO BACKUP IN OFFICIAL ROM?
Shah65367 said:
H0W T0 BACK UP NVRAM DATA ND HOW TO BACKUP IN OFFICIAL ROM?
Click to expand...
Click to collapse
You can do that using TWRP or SP FLASH TOOL, read this: https://forum.xda-developers.com/t/...-on-merlin-redmi-note-9-redmi-10x-4g.4230423/
VD171 said:
You can do that using TWRP or SP FLASH TOOL, read this: https://forum.xda-developers.com/t/...-on-merlin-redmi-note-9-redmi-10x-4g.4230423/
Click to expand...
Click to collapse
ENGINEERING ROM NOT FLASHING VIA SP FLASH TOOL "CMD BROM ERROR"
Shah65367 said:
ENGINEERING ROM NOT FLASHING VIA SP FLASH TOOL "CMD BROM ERROR"
Click to expand...
Click to collapse
Try this: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
GETTING THIS ERROR SEE SCREEN SHOT THEN I TRIED IN FIRMWARE UPGRADE THEN SP FLASH SHOWING "DA 100% DONE"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shah65367 said:
GETTING THIS ERROR SEE SCREEN SHOT THEN I TRIED IN FIRMWARE UPGRADE THEN SP FLASH SHOWING "DA 100% DONE" View attachment 5250249
Click to expand...
Click to collapse
If you are facing the PMT changed error, you are using a different scatter file than used before.
You just need to use the SAME scatter file.
Here, you can find scatter file for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223097/
VD171 said:
If you are facing the PMT changed error, you are using a different scatter file than used before.
You just need to use the SAME scatter file.
Here, you can find scatter file for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223097/
Click to expand...
Click to collapse
I unzipped engineering rom if I will flash other scatter file then METAMOD will not detect my device....totally confused right not

Categories

Resources