Related
After a series of poorly judged flashes and (eventually) factory resets in the name of acquiring root, I am left with a stock S6 that gets no service whatsoever. Knox is tripped. The phone shows 5 bars but will not connect to 4G, GSM, CDMA, nor will it send/receive anything unless it's connected to Wifi and uses wifi calling.
I've been trying to fix this since 11pm last night and I am extremely frustrated. I would love to pay someone who has a clear understanding of these things to hold my hand through getting this thing working again. I have passed the point where my skills can help me.
Hi do you have facebook
Sent from my SM-G800H using Tapatalk
Have you put in your phone companies apn settings ?
Have you tried to Odin back to stock? It sounds like you flashed a custom recovery; what exactly did you do?
Yes, the APN settings are correct. I entered them manually in a second profile, but they were prepopulated as well. Neither makes a difference. I get "Not registered on network" when I try to make a call. When I try to have the phone detect TMobile's network, it says "Unable to select network. Select automatically".
The big issue is, I'm fairly certain the first thing I flashed was not meant for this phone...smh. I was able to Odin back to stock. Before and after multiple factory resets and cache wipes (though no settting for Dalvik cache in recovery...does this mean anything?) everything works fine except I have no service.
Try and toggle Airplane mode on and off? Also if you were on Wifi with Wifi calling disable both of those for the time being. Last case would be to odin factory firmware.
yes, i've tried that. i've tried removing the sim card for a few minutes to no avail.
with wifi and wifi calling on, the phone functions as normal but as soon as that's off, everything stops working.
I don't trust Odin to wipe everything it should.
Download a rooted stock rom. Then go into recovery, mount /system and wipe /system, cache & data, then flash the rom. Finish the setup wizard and try to make a call without wifi. If you cannot, verify APN is correct.
You could have a bad sim card. Sim cards die just like any other piece of electronics. Go to T-Mobile and swap sim cards, they should do it for free.
Edit: I just realized you are probably still on stock recovery. Root your system, flash twrp, then nuke the phone in recovery and start from scratch.
I assume you already tried restoring a nandroid. If that doesn't work and you can't make calls after restoring via Odin or flashing another rom, then you may have corrupted the EFS partition. The only way to recover from that is if you backed up your original EFS partition. A lot of people don't bother, but it is a critical step before flashing your first mod.
..
thank you so much for the advice. i'm trying this now.
OMGitsAlize said:
Have you put in your phone companies apn settings ?
Click to expand...
Click to collapse
socal87 said:
Have you tried to Odin back to stock? It sounds like you flashed a custom recovery; what exactly did you do?
Click to expand...
Click to collapse
Saafir said:
Wouldn't hurt to give Update Profile a go under System Update too.
Click to expand...
Click to collapse
this option does not exist for me
sublimaze said:
I don't trust Odin to wipe everything it should.
Download a rooted stock rom. Then go into recovery, mount /system and wipe /system, cache & data, then flash the rom. Finish the setup wizard and try to make a call without wifi. If you cannot, verify APN is correct.
You could have a bad sim card. Sim cards die just like any other piece of electronics. Go to T-Mobile and swap sim cards, they should do it for free.
Edit: I just realized you are probably still on stock recovery. Root your system, flash twrp, then nuke the phone in recovery and start from scratch.
I assume you already tried restoring a nandroid. If that doesn't work and you can't make calls after restoring via Odin or flashing another rom, then you may have corrupted the EFS partition. The only way to recover from that is if you backed up your original EFS partition. A lot of people don't bother, but it is a critical step before flashing your first mod.
Click to expand...
Click to collapse
okay, i do think it's possible that i corrupted the EFS partition. however, in download mode, the IMEI number it displays is correct.
i am able to get the phone rooted and twrp installed, but once i try to flash the rooted stock rom, i get a "error executing updater binary in zip". not sure how to proceed.
i may abandon the phone altogether and just order an insurance replacement :-/
postmastergeneral said:
okay, i do think it's possible that i corrupted the EFS partition. however, in download mode, the IMEI number it displays is correct.
i am able to get the phone rooted and twrp installed, but once i try to flash the rooted stock rom, i get a "error executing updater binary in zip". not sure how to proceed.
i may abandon the phone altogether and just order an insurance replacement :-/
Click to expand...
Click to collapse
With knox tripped gooood luck. Also, did u have an EFS backup?
That error message means the rom zip is looking for a different device code than the one you are trying to flash it on. Where did you get the rom file? Are you sure it is correct for your S6?
dial *#0011# and post a screenshot for me. I can help you.
Sunderwear said:
dial *#0011# and post a screenshot for me. I can help you.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THANK YOU
Pm. I'll help you
Any resolution? I am curious to know what exactly happened and what fixed it.
sorry for not PMing you. i got frustrated and stubborn and just ordered a new phone.
postmastergeneral said:
sorry for not PMing you. i got frustrated and stubborn and just ordered a new phone.
Click to expand...
Click to collapse
I feel bad for you - but very curious about one thing - I thought I read the thread carefully and never noticed a response to the question - "Did you try to odin back to Stock?"
Samsung phones are amazingly resilient - and under most conditions (unless you the phone is really totally FUBARed ) odining back to stock cures 99% of all problems - at least that I have seen. And except in one instance with the NOTE 3 (after it's initial release) Odining the stock rom usually fixes the problem every time. The note three was an unusual circumstance in my memory - and it happend to a bunch of people - I actually screwed up two phones and returned them both to get replacements - Odin would not fix the problem because one of the particians or maybe all of them had been corrupted) but you had an IMEI where I did not - so I don't think that was your issue (although, I may be wrong)
anyway, I can understand your frustration - I have been there my self - but usually cooler heads (the people at XDA) have helped me to find the solution that eventually worked - did you try to ODIN back to Stock? If that did not work then returning the phone may have been your only option - but I would love to know if you did try that option?
Hi all !
Since a week, i had a GPS problem with my i9305, it happened after i had flashed couple of AOSP roms, i dont know after which one it was exactly, the problem was that it couldnt get a lock onto my location, also couldnt find any satellites in any GPS fix/testing apps avaialable in the playstore, it was showing the blinking GPS icon on the left side in the statusbar, but there was no lock, it was endlessly blinking/searching for nothing.. Ive switched many times between AOSP and Samsung based roms, but this was the first time i encountered this kind of problem, which took me a week to figure out how to fix it :silly:
I tried many possible solutions such as, full wiping the rom, factory resetting within the settings, flashing back to STOCK rom with Odin, tightening the screws in the back of the phone, resetting and updating AGPS, changing GPS related files and libs in the rom, trying different roms etc. etc. with all to no avail !!
Then i did some research on the net and found the solution that worked for me, surprisingly it did even fix GLONASS that wasnt working before the problem occured, now GPS works perfectly fine!
SOLUTION:
1. first we need to enter service mode, this may differ for various android versions (4.3 - 4.4.4 - 5.1.1 etc.) just search for the right method if it is different. I did this on my android 4.4.4 KK ported note4 rom (Eclipse ROM)
Note: be sure the rom your doing this on, has the ServiceModeApp(_RIL).apk installed in system/priv-app, otherwise you wont be able to get in service mode!
Note: also if you dont have a sim password set, your phone might get sim locked, so set a pin password before doing this, afterwards you can always disable it again if you want..
2. in dial pad enter *#0011# to get in service mode
3. to unlock the main menu: press menu --> press back --> press menu --> press key input --> enter Q0 --> press ok and wait for the main menu to appear
4. now, press UMTS --> press COMMON --> press NV REBUILD --> press Restore Back-up
5. your device should now be rebooting and after that GPS issue should be fixed hopefully test your GPS with any app from the playstore..
Steps 3 and 4 pictures:
View attachment 3434862
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 3434866 View attachment 3434867 View attachment 3434870 View attachment 3434871
Below are some screenshots of the results of my test with the app ''GPS Test'' from the playstore:
Inside the house
Outside the house
I hope this post will be usefull for others, good luck if you are about to try this out! :good:
Follow this guide by @Alexander_the_B0ss to SIM-unlock your device if it gets SIM-locked after following the steps above!
Remember that i am in no way responsible for anything if you mess up things with your device !!
I had the same problem and the fix I did was to restore previously backed up NV from QPST app on pc
---------- Post added at 07:11 AM ---------- Previous post was at 07:06 AM ----------
I backed-up NV data using the guide in here
http://forum.xda-developers.com/showthread.php?t=1946915
Shadow92.Ahmed said:
I had the same problem and the fix I did was to restore previously backed up NV from QPST app on pc
---------- Post added at 07:11 AM ---------- Previous post was at 07:06 AM ----------
I backed-up NV data using the guide in here
http://forum.xda-developers.com/showthread.php?t=1946915
Click to expand...
Click to collapse
Yep, same thing, different procedure :good:
I really appreciate you sharing the fix. I've spent the best part of today trying to find a solution to this, and have taken my S3 apart more than once.
I even think I tried this fix earlier on my non-stock ROM and it didn't work.
Worked for me on the stock 4.4.4 ROM for EE.
MaHo_66 said:
Yep, same thing, different procedure :good:
Click to expand...
Click to collapse
We all try to help each other
GPS problem fixed
Hey,
and thank you soooo much for your helping advice
I did like you said and voila, GPS problem is history.
But what problem I still have is that I can´t flash any 5.x.x custom ROMs. Flashing goes well, but when it is time to reboot, my i9305 stuck to somekind of loop. I can flash stock ROM 4.4.4 and custom ROMs 4.4.4 as well, but Lollipop doesn´t work.
First time I had this problem was when I flashed some 5.1 ROM ( I don´t remember what was it ) But in that ROM suddenly happen that "Google services has stopped" or something like that. I couldn´t do nothing with phone. That error came again and again to phone´s screen..
So I was in situation that I had to flash stock 4.4.4 stock ROM. eveything went well, but GPS didn´t work anymore. Then I found your advice and I thought that now I can again flash custom ROMs as well. Flashing any custom 5.x.x ROM goes well, but in reboot, pghone stuck to loop.
Or had I wait longer in first time I reboot phone after flash?
Thank you so much in advance
/markkus
MarkkuAS said:
Hey,
and thank you soooo much for your helping advice
I did like you said and voila, GPS problem is history.
But what problem I still have is that I can´t flash any 5.x.x custom ROMs. Flashing goes well, but when it is time to reboot, my i9305 stuck to somekind of loop. I can flash stock ROM 4.4.4 and custom ROMs 4.4.4 as well, but Lollipop doesn´t work.
First time I had this problem was when I flashed some 5.1 ROM ( I don´t remember what was it ) But in that ROM suddenly happen that "Google services has stopped" or something like that. I couldn´t do nothing with phone. That error came again and again to phone´s screen..
So I was in situation that I had to flash stock 4.4.4 stock ROM. eveything went well, but GPS didn´t work anymore. Then I found your advice and I thought that now I can again flash custom ROMs as well. Flashing any custom 5.x.x ROM goes well, but in reboot, pghone stuck to loop.
Or had I wait longer in first time I reboot phone after flash?
Thank you so much in advance
/markkus
Click to expand...
Click to collapse
I don't know if it is related to your problem, but I had many problems with 5.X.X builds boot looping because of wrong gapps package. For example, using PA gapps with CM12.1 or Resurrection Remix causes a bootloop, but just flashing the rom and rebooting doesn't cause any bootloop at all. You might want to flash just the rom and let it boot. Cheers
I tried this and it ****ed my IMEI and efs folder i think my phone is dead
xellosx said:
I tried this and it ****ed my IMEI and efs folder i think my phone is dead
Click to expand...
Click to collapse
Can you confirm that your IMEI is really f***ed by flashing this zip file in recovery? Always helped me to bring back my IMEI (uploading to Gdrive ATM)
Edit: https://drive.google.com/file/d/0B9NUrR6bPQUxT2R6cWNiNHBTdjg/view?usp=sharing here you go.
I fixed it by flashing an official stock rom but thanks any way
Thank god for this fix, had to do it manually coz flashing the zip in recovery didn't work out for me. Thanks!
Sent from my GT-I9305 using Tapatalk
Thank you so much bruh
Sent from my GT-I9305 using Tapatalk
Help quick please!
I am with 4.4.4<<<[KK][STOCK][TW][STABLE][+AROMA] N4 Elite Lite v12, but location issue like others.
I made this solution here with NV REBUILD, but when my phone restarts it was SIM LOCKED and ask me for PIN UNLOCK
My phone was never locked before, but now is locked. What to do please?
lubo_uni said:
I am with 4.4.4<<<[KK][STOCK][TW][STABLE][+AROMA] N4 Elite Lite v12, but location issue like others.
I made this solution here with NV REBUILD, but when my phone restarts it was SIM LOCKED and ask me for PIN UNLOCK
My phone was never locked before, but now is locked. What to do please?
Click to expand...
Click to collapse
I just did the "Fix" GPS is fixed but my phone is locked!!
Whats the deal how do I unlock it again?
bigbossa said:
I just did the "Fix" GPS is fixed but my phone is locked!!
Whats the deal how do I unlock it again?
Click to expand...
Click to collapse
Ok managed to unlock my phone using this method
http://forum.xda-developers.com/galaxy-s3/help-i9305/sim-card-unlock-samsung-galaxy-s3-gt-t2185866
if you need a link to JB 4.1.1 you will have to register (use chrome browser to translate automatically)
https://www.samdownloads.de/download/i9305xxali5-4-1-1-germany-t-mobile/
GPS Fix still works
Thanks so much! This worked for me on AMCHA Rom KK v6.10.
I had previously upgraded to a 5.x ROM and then downgraded and I think this is when the GPS had stopped working.
I ran through the provided steps and did not get a Sim Lock error after reboot either.
Legend!
thnx @MaHo_66
works like a charm..
lubo_uni said:
I am with 4.4.4<<<[KK][STOCK][TW][STABLE][+AROMA] N4 Elite Lite v12, but location issue like others.
I made this solution here with NV REBUILD, but when my phone restarts it was SIM LOCKED and ask me for PIN UNLOCK
My phone was never locked before, but now is locked. What to do please?
Click to expand...
Click to collapse
bigbossa said:
I just did the "Fix" GPS is fixed but my phone is locked!!
Whats the deal how do I unlock it again?
Click to expand...
Click to collapse
bigbossa said:
Ok managed to unlock my phone using this method
http://forum.xda-developers.com/galaxy-s3/help-i9305/sim-card-unlock-samsung-galaxy-s3-gt-t2185866
if you need a link to JB 4.1.1 you will have to register (use chrome browser to translate automatically)
https://www.samdownloads.de/download/i9305xxali5-4-1-1-germany-t-mobile/
GPS Fix still works
Click to expand...
Click to collapse
To all using this method, if your device has been unlocked by someone,
THIS METHOD WILL RE-LOCK IT
Solutions:
You're probably on the knox bootloader, and to use the commands of that xda thread, you need a 4.1 rom.
But you can't flash a 4.1 rom because it will fail on the bootloader, so you need a 4.1 with 4.3 bootloader in ODIN format.
Here's one, fzeta is a forum member, all credits to him:
http://www.mediafire.com/download/9y2xo8a16w41eyr/Firmware_4.1.1_Modificado_for_fzeta.zip
Flash the rom, unlock the device with the known commands, and then re-flash philz recovery by known methods, and you're done.
*#0011# gets me into service mode but Q0 doesnt work for me on 4.4.4
any other codes?
thanks work for me
Hello, i was given a blu R1 HD prime phone that was bricked by one of my relatives, according to him, he tried to do a format all + download on this phone, which as far as im aware, is a death flag, so i have here this bricked phone, i installed mrmazak's prime 6.1 no nv.zip file on this phone, but it still gives me the TOOL DL IMAGE FAIL, error i've heard a lot about, i also saw him saying "THIS IS NOT THE PACKAGE YOU NEED" in which case i can do nothing but ask, whats the correct package to get this bad boy up and running again? thanks beforehand.
PS: The phone is 8gb/1gb ram ver. was on ver 6.1, amazon before the brick, no OTA's.
Shinnazuka0411 said:
Hello, i was given a blu R1 HD prime phone that was bricked by one of my relatives, according to him, he tried to do a format all + download on this phone, which as far as im aware, is a death flag, so i have here this bricked phone, i installed mrmazak's prime 6.1 no nv.zip file on this phone, but it still gives me the TOOL DL IMAGE FAIL, error i've heard a lot about, i also saw him saying "THIS IS NOT THE PACKAGE YOU NEED" in which case i can do nothing but ask, whats the correct package to get this bad boy up and running again? thanks beforehand.
PS: The phone is 8gb/1gb ram ver. was on ver 6.1, amazon before the brick, no OTA's.
Click to expand...
Click to collapse
For a device that was format all. Will need more partitions than are in that package you tried. Also I have tried to work with someone else who had the 8gb size device, we could not get past that error.
I do recall that the last last person got a new board for his phone and pulled the images from it to share. There is a link in the main thread somewhere. But , well even when he tried to restore his own backup from good device to the one with do error, it did not work.
NVM
I remembered it wrong. He tried to pull it, but could not do it.
Look through this thread. Maybe you can try to follow the advice I gave him, and it may work for you.
https://forum.xda-developers.com/r1...-blu-r1-hd-t3440261/post76482224#post76482224
Well, from this mess in english, i can kind of attempt to understand that he tried to install v17 backup, and it didnt work due to the PMT CHANGED FOR THIS ROM, then he somewhere got a .bin backup for miracle?, and then silence, i dont know what else you tried suggesting to him since his english was so bad, i cant follow the steps, on another note, got that .bin backup? maybe ill try flashing it with miracle tool and praying that it'll work. Also, which V17 should i use, NVRAM or NONV
Shinnazuka0411 said:
Well, from this mess in english, i can kind of attempt to understand that he tried to install v17 backup, and it didnt work due to the PMT CHANGED FOR THIS ROM, then he somewhere got a .bin backup for miracle?, and then silence, i dont know what else you tried suggesting to him since his english was so bad, i cant follow the steps, on another note, got that .bin backup? maybe ill try flashing it with miracle tool and praying that it'll work. Also, which V17 should i use, NVRAM or NONV
Click to expand...
Click to collapse
There is now a "repair rom" listed in an mtk support group I try to follow. I have not checked it out yet, but maybe it will help. Let me open this on PC to search for the link
this one was labled v6.4 firmware http://www.mediafire.com/file/6kys9896445l5sm/SP_Flash_Tool_BLU_R0010UU_V6.4_Firmware.zip/file
this is labled as a repair firmware http://www.mediafire.com/file/il54pxuvpkargtr/BLU_R1_HD_R0030UU_REPAIR_MT6735.rar/file
I would have you look at those , first i suppose.
if it does not work I do have backups made from miricle-box, but they are not uploaded anywhere right now.
Real appreciated, will keep you updated, if anything works ill post it here.
Alright, i tried the 6.4 rom, it didnt work, i had it already, i also tried to install the "repair firmware" but in the v5.1628.00.000 version of my SPFT it shows me "SP FLASH TOOL ERROR: (8417) THE LOAD SCATTER FILE IS INVALID", then i try on another version (v5.1744 & v5.1804), then tells me STATUS_SCATTER_FILE_INVALID (0xC00300001), i tried the fix copypasting the hashtags and general settings on top for both cases but that didnt work, i noticed the scatter file looks really weird, not like most of the ones posted here or elsewhere, its just a bunch of rows and not organized in the slightest, maybe i need to try using the scatter for my 8gb/1gb ram? since R0030UU is the 16gb/2gb ram's model code
---------------------------------------------------------------------------------------------------------------------------------------------------------------EDIT: Tried mixed and matching the every file from the MT6735 repair firmware with the ones it didnt have from the prime 6.1 rom whilist using said 6.1 scatter, still on TOOL DL IMAGE FAIL
Shinnazuka0411 said:
Alright, i tried the 6.4 rom, it didnt work, i had it already, i also tried to install the "repair firmware" but in the v5.1628.00.000 version of my SPFT it shows me "SP FLASH TOOL ERROR: (8417) THE LOAD SCATTER FILE IS INVALID", then i try on another version (v5.1744 & v5.1804), then tells me STATUS_SCATTER_FILE_INVALID (0xC00300001), i tried the fix copypasting the hashtags and general settings on top for both cases but that didnt work, i noticed the scatter file looks really weird, not like most of the ones posted here or elsewhere, its just a bunch of rows and not organized in the slightest, maybe i need to try using the scatter for my 8gb/1gb ram? since R0030UU is the 16gb/2gb ram's model code
---------------------------------------------------------------------------------------------------------------------------------------------------------------EDIT: Tried mixed and matching the every file from the MT6735 repair firmware with the ones it didnt have from the prime 6.1 rom whilist using said 6.1 scatter, still on TOOL DL IMAGE FAIL
Click to expand...
Click to collapse
all I can do is share the backup from miricle-box that I have.
https://www.androidfilehost.com/?fid=5862345805528042536
Just trying to catch up, so bricked phone that wont format correct? Do you have twrp on it?
mrmazak said:
all I can do is share the backup from miricle-box that I have.
androidfilehost/?fid=5862345805528042536
Click to expand...
Click to collapse
Hi, this work on BLU R0030UU 2GB/16GB or R0010UU??
TavoStyle said:
Hi, this work on BLU R0030UU 2GB/16GB or R0010UU??
Click to expand...
Click to collapse
This is from 16gb so the R0030uu
mrmazak said:
This is from 16gb so the R0030uu
Click to expand...
Click to collapse
Hi!, I am from Venezuela, I apologize for my English, I am using the Google translator ...
I tried to put the software but the following error appears
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TavoStyle said:
Hi!, I am from Venezuela, I apologize for my English, I am using the Google translator ...
I tried to put the software but the following error appears
Click to expand...
Click to collapse
Hello,
two issues.
first, the backup has scatter file formatted for use in miracle box, not sp flash tool.
next, The preloader on any updated phone has been changed and does not work to flash anymore.
So, what is / was version on your phone , so I can know if it should be able to work or not?
\
mrmazak said:
Hello,
two issues.
first, the backup has scatter file formatted for use in miracle box, not sp flash tool.
next, The preloader on any updated phone has been changed and does not work to flash anymore.
So, what is / was version on your phone , so I can know if it should be able to work or not?
\
Click to expand...
Click to collapse
First: If I use Miracle Box Crack 2.27A, can it work? (Would I have to disconnect and connect the battery to start the phone again?)
Next: I unchecked the Preloader because once I leave a brick as a phone to leave marked that option
Version: (Screen OLD, Now is in BLU Screen) (Ohhh I never UPDATE the software, I never use ROOT, I never use debloat...)
TavoStyle said:
First: If I use Miracle Box Crack 2.27A, can it work? (Would I have to disconnect and connect the battery to start the phone again?)
Next: I unchecked the Preloader because once I leave a brick as a phone to leave marked that option
Version: (Screen OLD, Now is in BLU Screen) (Ohhh I never UPDATE the software, I never use ROOT, I never use debloat...)
Click to expand...
Click to collapse
Most important part (custom build number) is missing from screen shot.
mrmazak said:
Most important part (custom build number) is missing from screen shot.
Click to expand...
Click to collapse
I just discovered something very crazy, I do not understand anything
In the recovery logs...
https://youtu.be/-sMubZoduig
TavoStyle said:
I just discovered something very crazy, I do not understand anything
In the recovery logs...
https://youtu.be/-sMubZoduig
Click to expand...
Click to collapse
so your build number is 6.6
you may be able to unlock.
But is phone still alive?
mrmazak said:
so your build number is 6.6
you may be able to unlock.
But is phone still alive?
Click to expand...
Click to collapse
My phone is stuck in the BLU logo
TavoStyle said:
My phone is stuck in the BLU logo
Click to expand...
Click to collapse
if it is still locked bootloader, and stock recovery fails to wipe data and / or cache. I do not have idea how to fix.\
Bricked BLU R1 HD
mrmazak said:
if it is still locked bootloader, and stock recovery fails to wipe data and / or cache. I do not have idea how to fix.\
Click to expand...
Click to collapse
Hi Mr Mazak
I had purchased non prime version of BLU R1 HD. I updated to the latest version via OTA. I had my phone rooted with super su and now wanted to try Magisk. After the reboot I had reinstalled the twrp recovery and did a format of all data on my phone. I am trying to install twrp but when I power on my device it is stuck on the boot loading screen. I have tried hold power button and volume down simultaneously and it reboots but gets stuck on the logo.
I tried using the sp flash tool to restore my phone to stock but it did not work. Get error S_BROM_DOWNLOAD_FAIL. 7d
My bootloader is unlocked.
Tried using adb commands but when I connect to the phone and run adb commands it says no authorisation.
If I can install twrp on the device then I will be able to install the rom from rootjunky, not sure if you require more info.
Awaiting your ananlys
Kind Regards
ismailf007 said:
Hi Mr Mazak
I had purchased non prime version of BLU R1 HD. I updated to the latest version via OTA.
Click to expand...
Click to collapse
The latest ota blocks the use of sp flash tool. And the kernel exploit used previouls. But now there is new exploit. But you cannot boot so that is mutt point now
ismailf007 said:
I had my phone rooted with super su and now wanted to try Magisk. After the reboot I had reinstalled the twrp recovery and did a format of all data on my phone.
Click to expand...
Click to collapse
Did you only format the data partition or whole device.?
ismailf007 said:
I am trying to install twrp but when I power on my device it is stuck on the boot loading screen.
Click to expand...
Click to collapse
This confuses me. You just said you had twrp already. Now you have trouble to I stall it.
ismailf007 said:
I have tried hold power button and volume down simultaneously and it reboots but gets stuck on the logo.
Click to expand...
Click to collapse
Did you use / try volume up?
ismailf007 said:
I tried using the sp flash tool to restore my phone to stock but it did not work. Get error S_BROM_DOWNLOAD_FAIL. 7d
My bootloader is unlocked.
Click to expand...
Click to collapse
From what you say.
1. You had working phone with SU root.
2. You have twrp installed
3. You wiped / formated with twrp
4. You now only boot to a logo screen. No recovery, or bootloader?
I tried to install twrp recovery in my redmi note 9 (merlin) then I lost my device I got hardbrick then i tried to recover unfortunately I formated my via sp flash tool now my mobile is back to life but I have lost Imei only SIM 1 working but UM not able to call with sim1 ND SIM 2 is not working can someone help me?
Since your device is MTK there are multiple ways to change your IMEI.
You can follow this guide to change your device IMEI back to original. (Changing IMEI to a different value than the default IMEI your device came with is illegal in most countries)
If you hate the technical stuff you can use this guide instead, it claims to be able to change the IMEI back to default value automatically by using baseband. Here is a video guide.
It's untested though so use it on your own risk.
Hope I helped.
XDHx86 said:
Since your device is MTK there are multiple ways to change your IMEI.
You can follow this guide to change your device IMEI back to original. (Changing IMEI to a different value than the default IMEI your device came with is illegal in most countries)
If you hate the technical stuff you can use this guide instead, it claims to be able to change the IMEI back to default value automatically by using baseband. Here is a video guide.
It's untested though so use it on your own risk.
Hope I helped.
Click to expand...
Click to collapse
XDHx86 said:
Since your device is MTK there are multiple ways to change your IMEI.
You can follow this guide to change your device IMEI back to original. (Changing IMEI to a different value than the default IMEI your device came with is illegal in most countries)
If you hate the technical stuff you can use this guide instead, it claims to be able to change the IMEI back to default value automatically by using baseband. Here is a video guide.
It's untested though so use it on your own risk.
Hope I helped.
Click to expand...
Click to collapse
can I recover wifi nvram error...? Via meta tool?
Shah65367 said:
can I recover wifi nvram error...? Via meta tool?
Click to expand...
Click to collapse
How to fix "NVRAM WARNING: Err = 0x10" error permanently.
Telegram Channel: t.me/xiaomiengs THIS TUTORIAL ONLY FOR XIAOMI DEVICES ONLY! (if you have nvram and nvdata backup, just restore it - will fix this issue) Requirements: Computer USB cable Engineering ROM for your device, download here Stock ROM for your device, download here 1. Install...
telegra.ph
This works for NVRAM issue
Communos said:
How to fix "NVRAM WARNING: Err = 0x10" error permanently.
Telegram Channel: t.me/xiaomiengs THIS TUTORIAL ONLY FOR XIAOMI DEVICES ONLY! (if you have nvram and nvdata backup, just restore it - will fix this issue) Requirements: Computer USB cable Engineering ROM for your device, download here Stock ROM for your device, download here 1. Install...
telegra.ph
This works for NVRAM issue
Click to expand...
Click to collapse
LINK IS NOT WORKING
Shah65367 said:
LINK IS NOT WORKING
Click to expand...
Click to collapse
You can follow this thread to fix this problem. (Literally first google result)
Shah65367 said:
can I recover wifi nvram error...? Via meta tool?
Click to expand...
Click to collapse
You can follow this thread to fix this problem. (Literally first google result)
XDHx86 said:
Since your device is MTK there are multiple ways to change your IMEI.
You can follow this guide to change your device IMEI back to original. (Changing IMEI to a different value than the default IMEI your device came with is illegal in most countries)
If you hate the technical stuff you can use this guide instead, it claims to be able to change the IMEI back to default value automatically by using baseband. Here is a video guide.
It's untested though so use it on your own risk.
Hope I helped.
Click to expand...
Click to collapse
link is not working why?
Shah65367 said:
link is not working why?
Click to expand...
Click to collapse
It requires hydra dongle https://www.hydra-dongle.com
PLZ TELL ME WITHOUT DONGLE ITS NOT POSSIBLE...? IS THERE ANY CRACK TOOL? I DONT HAVE MONEY I WANNA REPAIR FREE OF COST
Shah65367 said:
PLZ TELL ME WITHOUT DONGLE ITS NOT POSSIBLE...? IS THERE ANY CRACK TOOL? I DONT HAVE MONEY I WANNA REPAIR FREE OF COST
Click to expand...
Click to collapse
You can repair only imei for slot2 by yourself.
Only Xiaomi Centre can recover imei for slot1.
If you want to recover the imei for slot2, just follow this step:
1. Flash the ENGINEERING ROM: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4227933/
2. Enter in META MODE using MODEM META: https://androidmtk.com/download-modemmeta-tool
3. Write IMEI for slot2 and keep blank/null for slot1.
4. Flash any other MIUI (or custom) ROM you want.
5. Backup NVDATA if you want to restore IMEI after.
Done.
VD171 said:
You can repair only imei for slot2 by yourself.
Only Xiaomi Centre can recover imei for slot1.
If you want to recover the imei for slot2, just follow this step:
1. Flash the ENGINEERING ROM: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4227933/
2. Enter in META MODE using MODEM META: https://androidmtk.com/download-modemmeta-tool
3. Write IMEI for slot2 and keep blank/null for slot1.
4. Flash any other MIUI (or custom) ROM you want.
5. Backup NVDATA if you want to restore IMEI after.
Done.
Click to expand...
Click to collapse
JUST TELL ME LAST THING...IF I DO NOT FLASH ENGINEERING ROM THEN I CANNOT
Shah65367 said:
JUST TELL ME LAST THING...IF I DO NOT FLASH ENGINEERING ROM THEN I CANNOT
Click to expand...
Click to collapse
No. Because that the step 1 is "Flash the ENGINEERING ROM".
Meta mode is not allowed on release versions.
VD171 said:
No. Because that the step 1 is "Flash the ENGINEERING ROM".
Meta mode is not allowed on release versions.
Click to expand...
Click to collapse
H0W T0 BACK UP NVRAM DATA ND HOW TO BACKUP IN OFFICIAL ROM?
Shah65367 said:
H0W T0 BACK UP NVRAM DATA ND HOW TO BACKUP IN OFFICIAL ROM?
Click to expand...
Click to collapse
You can do that using TWRP or SP FLASH TOOL, read this: https://forum.xda-developers.com/t/...-on-merlin-redmi-note-9-redmi-10x-4g.4230423/
VD171 said:
You can do that using TWRP or SP FLASH TOOL, read this: https://forum.xda-developers.com/t/...-on-merlin-redmi-note-9-redmi-10x-4g.4230423/
Click to expand...
Click to collapse
ENGINEERING ROM NOT FLASHING VIA SP FLASH TOOL "CMD BROM ERROR"
Shah65367 said:
ENGINEERING ROM NOT FLASHING VIA SP FLASH TOOL "CMD BROM ERROR"
Click to expand...
Click to collapse
Try this: https://forum.xda-developers.com/t/...for-merlin-redmi-note-9-redmi-10x-4g.4238161/
GETTING THIS ERROR SEE SCREEN SHOT THEN I TRIED IN FIRMWARE UPGRADE THEN SP FLASH SHOWING "DA 100% DONE"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Shah65367 said:
GETTING THIS ERROR SEE SCREEN SHOT THEN I TRIED IN FIRMWARE UPGRADE THEN SP FLASH SHOWING "DA 100% DONE" View attachment 5250249
Click to expand...
Click to collapse
If you are facing the PMT changed error, you are using a different scatter file than used before.
You just need to use the SAME scatter file.
Here, you can find scatter file for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223097/
VD171 said:
If you are facing the PMT changed error, you are using a different scatter file than used before.
You just need to use the SAME scatter file.
Here, you can find scatter file for MERLIN: https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4223097/
Click to expand...
Click to collapse
I unzipped engineering rom if I will flash other scatter file then METAMOD will not detect my device....totally confused right not
While I was trying to throw the imei, I found myself in the software 3 It was bricked 4 times. I saved it. I somehow found it by researching, but I've been crazy for 1 week. I can't find a solution anymore. Please help.
First Imeiler Deleted I Don't Know How To Bring Back It Looks Null.I'm Trying to Install Rom No matter what I do, I'm always doing a clean install from Twrp, if an error is my current mistake, but the phone turns on, then it crashes and Twrp opens. No matter what I do, the moment it boots and the desktop appears, it throws itself into Twrp. There were 2 partitions A/B in the boot. I Said I'd Fix Imei With Engineer Rom I Said I'd Fix It With Your Rom Now I Want To Do It With Your Direction And That's Why I Just Joined You. I Don't Know English So I Tried To Translate It With Translation If I Said Something Wrong Please Let Me Know What I Don't Know. Thank You In Advance And Regards. Good Forums.
Download Mi Tool V2 on your computer and use that to unbrick your phone
XiaoMiTool V2 - Download XiaoMiTool V2 for free
Downlaod XiaoMiTool V2 for free and choose the version you want
www.xiaomitool.com
Kenora_I said:
Bilgisayarınıza Mi Tool V2'yi indirip kullanın ve kullanmak için kullanmak için kullanmak için
XiaoMiTool V2 - Download XiaoMiTool V2 for free
Downlaod XiaoMiTool V2 for free and choose the version you want
www.xiaomitool.com
Click to expand...
Click to collapse
Bunu zaten tahmin edebiliyor hata veriyor ama bootloader açık kaynaklanmıyor.
I would like to add at this time, I flashed the engineering rom right now, the phone opened like that, I'm researching how to fix the imei, I couldn't find it
So you have tried to flash a full fastboot stock ROM with MiFlash?
Kenora_I said:
So you have tried to flash a full fastboot stock ROM with MiFlash?
Click to expand...
Click to collapse
yes, it gave an error again, this time it gave super flash and time out errors And as I said now, I flashed the engineering rom, it just opened, I don't know what to do, I'm very confused, I don't want to make another mistake
ByLeoo said:
yes, it gave an error again, this time it gave super flash and time out errors And as I said now, I flashed the engineering rom, it just opened, I don't know what to do, I'm very confused, I don't want to make another mistake
Click to expand...
Click to collapse
Theres no change to the boot.img?
How to flash Xiaomi firmware via Fastboot & Recovery mode
Flashing your Redmi/Mi smartphone with Xiaomi official firmware (MIUI) will help you fix certain software issues on the phone. It also helps you to get rid of root and all modifications made to your phone system software. To upgrade, update or fix minor software problems on your phone, flashing...
www.leakite.com
Follow this step by step without change and get back to me
Kenora_I said:
How to flash Xiaomi firmware via Fastboot & Recovery mode
Flashing your Redmi/Mi smartphone with Xiaomi official firmware (MIUI) will help you fix certain software issues on the phone. It also helps you to get rid of root and all modifications made to your phone system software. To upgrade, update or fix minor software problems on your phone, flashing...
www.leakite.com
Follow this step by step without change and get back to me
Click to expand...
Click to collapse
ok i'm doing and i'm back so how can i fix imei now wouldn't it be easier now that eng rom is installed? Thank you for your help
Download qcn rebuilder tool and use that
descarao81 said:
EDIT QCN
EDIT QCN
IntroductionThis can be useful in case you loose your IMEI and you don't have a QCN backup to restore. Then the only option is to edit the IMEI stored in other's QCN backup to put your IMEI and restore the QCN file in your device. The most common reason for lost IMEI is selecting in QFIL the option to "Erase all before download" which erase absolutely everything when you install a ROM, QCN of course included.
0. Pre-requisites
- A QCN file. You can ask someone to share his with you or just download this "genericIMEI.qcn" file.
- "Qualcomm IMEI rebuilder" downloaded (from here) and extracted.
1. Run IMEIRebuilder.exe
2. Open the QCN file
Press the "Open file..." button, browse to select the QCN file and press "Open".
You will see random numbers loaded in IMEI1 and IMEI2
3. Edit IMEI1 and IMEI2 to put yours
4. Select "Rebuild"
Once it's done you can close the IMEI rebuilder software, re-execute it and load the edited to file to check that now it contains your IMEI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Do you have a QCN file for ur phone? Use that in that tool
Kenora_I said:
Do you have a QCN file for ur phone? Use that in that tool
Click to expand...
Click to collapse
there is, but it gave an error while taking a backup, is it defective, my qcn backup for 11
Hmm try it in the tool i posted above or find one from the internet
Kenora_I said:
Hmm try it in the tool i posted above or find one from the internet
Click to expand...
Click to collapse
I tried it with Ö tool, it gave me an error, because the file is defective, now I'm trying to create it again I will try and write right away, thank you very much for your help
ByLeoo said:
I tried it with Ö tool, it gave me an error, because the file is defective, now I'm trying to create it again I will try and write right away, thank you very much for your help
Click to expand...
Click to collapse
No problem! Good luck
Kenora_I said:
No problem! Good luck
Click to expand...
Click to collapse
thanks you bro imei now when i flash the rom
Kenora_I said:
No problem! Good luck
Click to expand...
Click to collapse
I want to ask something, now that the imei is repaired, is it okay if I install a custom rom? my friend installed oneos, it was very nice and most of the 11 problems were solved, if I install it with twrp, will the imei go back?
Sure i think, custom roms dont break IMEI...
If it does just make a backup of ur fixed qcn then just flash that if it breaks
tanks Bro ok oneos rom download ı am wait
Kenora_I said:
Sure i think, custom roms dont break IMEI...
If it does just make a backup of ur fixed qcn then just flash that if it breaks
Click to expand...
Click to collapse
sir, the rom was installed without any problems, but tell me, there is a problem, it restarts while opening and twrp enters
Son GSM said:
Hello, Is your problem bricked or lost imei? Please clarify your problem! We can help you!
View attachment 5358737
Click to expand...
Click to collapse
imei has been repaired.
The only problem now is which rom I install, when the phone starts, it restarts and twrp opens.