I'm sure there is a simple fix for this, but...
When I have my Jabra BT250v paired with my AT&T Tilt, the phone does not ring. If I'm wearing it, then I can hear the call coming through, it actually announces who is calling, pretty cool, but I don't wear it constantly. So, how do I get it to ring on the phone, again?
Thanks,
John
jconway1968 said:
...So, how do I get it to ring on the phone, again?...
Click to expand...
Click to collapse
Don't unpair, just turn the headset off
That is one solution. However, then I can't answer the phone with my bluetooth. By the time I turn it on and let it connect with the phone, the call goes into v-mail...
Any other thoughts. Is there a setting on the phone, that I can uncheck, that would allow it to ring on the phone, instead or in addition to the bluetooth?
John
Hi all,
I have a brand new Note and I'm not sure that it's working fine:
When I plug the included handsfree in the jack, and yes all the way in until it "clicks", I have the following weird behavior:
- sound on phone conversation comes from handsfree but microphone active is not the one from the handsfree, it's the one from the phone
- when using Skype, sound comes from phone loudspeaker, then when I unplug the handsfree the sound comes from the phone earspeaker, then when I plug the handsfree again the sound comes from the handsfree... and while all this the active microphone is the one from the phone
I have no way to check whether it's the phone or the handsfree, both are new from unsealed box, I think I suspect the phone, and more precisely the phone is having a hard time knowing when/if its handsfree is plugged...?
I have another 10 days to return the phone and get a new one, anything that I'm doing wrong or shall I return it?
(It's a white Note running latest 2.3.6)
Thanks for your help.
As an update, I read that the Skype issue is... well, a Skype issue and that they're working on it...
But the problem remains with the microphone of the handsfree, still not working, not working when making phone calls, and not working with the application "Voice Recorder".
Any setting that I have to use in order to enable the handsfree mic to work and not use the phone microphone when the handsfree is plugged in (all the way until the click) ? I wouldn't think so but asking just in case before raising hell at the store so they give me a new one.
(BTW the phone's not rooted or anything, all stock 2.3.6)
Thanks for any feedback.
Has anyone else been unable to make phone calls after connecting to your vehicle's bluetooth? Most of the time, I can make phone calls without issue. Sometimes, I can't even hear the call ring when I'm connected to bluetooth. Occasionally, when I turn my vehicle off, the call goes silent instead of transferring to the earpiece on the phone. The only way I can fix the issue is rebooting the phone. This has become increasingly frustrating for me, since the issue is so inconsistent.
I'm running the stock ROM, rooted and un-encrypted.
Thanks!
Same here
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I just got my N6 today and I'm having trouble with My Ford Touch as well. I can get it to pair and play music, but it won't "connect" to my phone. It's odd because my N5 works fine with it. I would assume the N6 wouldn't be different.
We probably have to wait for an update from Ford, which will probably take months...
EDIT: Well I decided to try it again. I deleted the Nexus 6 entry as well as the Nexus 5 entry. Went through the pairing process again and it worked as intended. Not sure what happened the first time.
I ran into the same problem as others where my N5 worked flawlessly with my Ford Sync in my fusion, but the N6 is terrible.
I love the phone, but this is really annoying. I get into the car and sometimes it connects immediately, other times I have to turn off and back on the bluetooth about 3 times for it to finally connect. Very weird. Ford offers an upgrade to my Sync system, but wants $50 to do the upgrade. Pass.
I might try what the other person did and delete all entries for phones and pair it again. Unfortunately, the weather is pretty bad outside, so it might need to wait a short bit.
Has anyone else had luck re-pairing with their car and had reliable connections?
I use Ford Sync.
robbnice said:
I'm having the exact same problem you are having with my Ford Touch Sync, Bluetooth has work maybe once. At other times only the music over bluetooth has work. But was unable to make hands free calling! I also made my ford touch sync a trusted device, and the problem with connection still continues! Hope someone could provide some suggestions
Stock rooted- TWRP- encryption removed
Click to expand...
Click to collapse
I use Ford Sync, and everything works as expected. I am Stock and unrooted. I guess it would come down to what version of Sync. Mine is from 2012. No touch screen. I also delete all other entries on the system and start from scratch making sure that the N6 is the main device.
If I can wake up the screen on my own, outgoing calls work fine
PaisanNYC said:
I am having issues also. Just today, my phone shows I am connected to my Pioneer Navi head unit, and the Pioneer shows connected to my phone. I proceed to make a call. The audio on my radio mutes as it should, and nothing. No ringing, no busy signal nothing. so i hang up and try three more times. on that third retry, i heard the other party faintly, realizing that even though my radio muted and shows BT connected, the call went through the ear speaker on the phone. When I hung up the phone, my radio unmuted.
Last week, I was having issues where i couldnt hear any rings or busy signals. It would be silent for 20 seconds or so, then i hear the other party say "hello".
I honestly thought it was my head unit, since it is about 4 years old. But now I see others with similar issues on other brand bluetooth systems in their cars.
Click to expand...
Click to collapse
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
androidfan91 said:
I have a Nexus 6 running Benzo ROM (5.1.1) and I have a GPS Nuvi 3580 bluetooth-enabled which I want to use to make calls while driving. I have added this device to my trusted devices so my phone unlocks as soon as it connected to it.
If my phone screen is on, then I'm able to call anyone from the bluetooth device, no issues. But as soon as my screen goes off, I can't make calls and when I switch on the screen on my own, I see a message "Process system isn't responding. Wait or close?"
Irrespective of what I select on this message, the call goes through. But it totally defeats the purpose of handsfree bluetooth mode. Is there something that is not allowing the bluetooth device to wake my phone up.
Also when I receive an incoming call, I see the notification on my GPS but I can't receive the call in one go. It takes multiple calls for it go through. I have also noticed that my bluetooth device keeps disconnecting and connecting without any change on either the phone or the GPS side.
Click to expand...
Click to collapse
Since I last made that post you quoted, i purchased and installed a 2015 model of the Pioneer AVIC-8100NEX. It has Android Auto, but can be used with the regular Pioneer UI also. I have had no issues anymore with this new radio. Maybe the BT protocol in the radio is newer? Im not that tech savvy to know. But the 2015 radio had no issues with BT calls anymore, on Pioneer's UI or Android Auto's UI.
Please I need your help, my edge 6 while in car every-time a call comes, it accepts the call. is there a way I can have the option where I can choose to accept or decline the call?
Thank you
It may be your stereo, not the phone. I have the option on my stereo to automatically answer the call. I don't know about the phone tho (might check any Car Mode apps that you may use.
So I got the phone and I'm trying to use the handfree Bluetooth in the car. I have connected the phone, and Spotify works flawlessly, but when I try to make a phone call it disconnects the car audio then goes to spraker/regular mode. I have tried to clear my Bluetooth app cache with no success. Do I have to sideload a new codec for the Bluetooth for it to stay connected to the car when making phone calls.
I'm running Pie 9, February 15th 2019 Update
Build number - P-mr1-rc003-rzr-190305.3110
I have searched but can't seem to find anything with the same issues as me, if come one could kindly point me at the right direction that would be great.
Having something similar.
My Wifes RP2 connects to an ATOTO A6 Pro headset, but when her phone rings it doesn't appear on the head unit, and we can't accept calls. you can initiate a call from the head unit, but it doesn't know the call is happening, so you can't drop the call. Been hoping Android 10 is coming soon, so I can upgrade her and test again.
My Huawei Mate 10 Pro works perfectly with the head unit, so I think this is RP2 related.
Did you find anything that helped you?
I'm having the exact same problem with my Razer Phone 2.
What car do you have? It's a 2015 Kia Soul for me.