URGENT Phone bricked after locking bootloader back with fastboot - Realme X2 Pro Questions & Answers

my phone only can get to edl mode and the bootloader is locked, i relocked it to receive ota updates. the "boot destroyed" message shows if you try to power it on. i tried QFIL with x2 pro firmware (ofp extracted) but no luck. is there anything i can try? thanks in advance.

UPDATE: i sent dm to https://www.facebook.com/NUNLOCKOFFICIAL and he unbricked it in a minute, you can trust him

Related

Bricked Gear Live?

Hi, I was wondering if anyone could please help. I have a gear live, always running on stock firmware. Randomly without me doing anything to the device, it got stuck on the boot logo. So I decided to see if I could boot into recovery mode, but I get the error
"mmc_read fail" and "movinand checksum confirmation fail"
The bootloader also seems to be locked, so is there any way I can recover this device?
EDIT: The only thing I can do is boot into Fastboot, can't enable USB Debugging for adb to work
Thanks
Please help, i can only access fastboot with a locked bootloader

Completely unbrick!!! EVA L19C185

Guys I am completely unbricked my phone EVA L19. I cant enter erecovery or flash something that adb says command not allowed. I can just enter fastboot mode. adb says my bootloader unlocked and fastboot says it is relocked, always stuck at huawei logo. Can you help me to do something to save my phone without sending warranty service? I almost tried all unbrick guides and result is nothing Why huawei hisuite dont support for eva L19!!
hiphoplife77 said:
Guys I am completely unbricked my phone EVA L19. I cant enter erecovery or flash something that adb says command not allowed. I can just enter fastboot mode. adb says my bootloader unlocked and fastboot says it is relocked, always stuck at huawei logo. Can you help me to do something to save my phone without sending warranty service? I almost tried all unbrick guides and result is nothing Why huawei hisuite dont support for eva L19!!
Click to expand...
Click to collapse
i am currently in the exact same situation on my EVA-L09, where i can't enter system, erecovery or dload. I also can't use fastboot or adb commands.
I am currently communicating back and forth with Huawei about the situation and I recommend that you do the same. As our phones can't be fixed unless we can use an ADB command to restore erecovery,
which in turn also reinstalls Dload.
We need a bit more informations to help. What cust are your phones, when you enter fastboot menu does it say locked or unlocked. What exactly were you doing before your phone failed (nougat upgrade?).
Have you tried eva-l09c432b136 firmwares to unbrick your phones?
Can you unlock your phones again from fastboot menu, and reflash them manually with fastboot commands?
I was trying to flash stock rom what L19C185B180. But failed and stuck at huawei logo. As I said fastboot says frp locked and bootloader relocked. But when I check from adb, it says botloader unlocked. And also when I am trying some command in fastboot, it says always command not allowed. I am unable to do anything from fastboot or hisuite.
hiphoplife77 said:
I was trying to flash stock rom what L19C185B180. But failed and stuck at huawei logo. As I said fastboot says frp locked and bootloader relocked. But when I check from adb, it says botloader unlocked. And also when I am trying some command in fastboot, it says always command not allowed. I am unable to do anything from fastboot or hisuite.
Click to expand...
Click to collapse
Did you tried factory reset from stock recovery?
I cant enter recovery. Just fastboot that never allow to flash something.
hiphoplife77 said:
I cant enter recovery. Just fastboot that never allow to flash something.
Click to expand...
Click to collapse
Did you put the full firmware in sd card and tried dload method again?
As I said I can only enter to fastboot, unfortunately.
hiphoplife77 said:
As I said I can only enter to fastboot, unfortunately.
Click to expand...
Click to collapse
Did you tried to unlock the bootloader again?
How did you flashed the firmware when the phone get bricked?
gm007 said:
Did you tried to unlock the bootloader again?
How did you flashed the firmware when the phone get bricked?
Click to expand...
Click to collapse
You didnt understand. First I flashed firmware after than phone bricked.
hiphoplife77 said:
You didnt understand. First I flashed firmware after than phone bricked.
Click to expand...
Click to collapse
You flashed the firmware with dload ot twrp?
Do you still have twrp?
I tried before but couldnt. I dont have twrp or erecovery. Just fastboot.
hiphoplife77 said:
You didnt understand. First I flashed firmware after than phone bricked.
Click to expand...
Click to collapse
Unlock your bootloader again, surely you allready have the bootloader unlock code. Bootloader can relock when flashing roms. Then try fastboot flash again. Just try it. No harm if it can't be done.
I cannot unlock bootloader again because command not allowed due to frp lock. Can I unlock frp from fastboot?
Also I tried to purchase dc phoenix credit for flashing stock rom but I couldnt. Hipay payment rejected and they want confirmed paypal account for purchasing. And also I couldnt do it because paypal does not exist in turkey and so I couldnt confirm my paypal account. Anyone have dc phoenix account with 15 credits? Donate me please
hiphoplife77 said:
Also I tried to purchase dc phoenix credit for flashing stock rom but I couldnt. Hipay payment rejected and they want confirmed paypal account for purchasing. And also I couldnt do it because paypal does not exist in turkey and so I couldnt confirm my paypal account. Anyone have dc phoenix account with 15 credits? Donate me please
Click to expand...
Click to collapse
Ok, from what I understand then you're stuck at trying with factory firmware. Try eva-l19c185b166, EVA-L09c185b136. Or find a service center that can erase your frp from fastboot.
Luckily I tried to change update.app file what I downloaded from official huawei support site, format my sd card and dload method worked. I am so happy now flashed l19c185b180, updated to b220 and bootloader is locked, not relocked interestingly luck is from my side now. I wont use any file that shared unofficially again. Thank you everyone for your helpful behaviours.

Huawei P9 Stuck on boot loop. dload method can't be accessed, eRecovery does not work

Hello! I was flashing my phone and wanted to restore it to a stock firmware.
Looks like I bricked the phone.
I can't access the dload method, eRecovery does not work and bootload is locked too.
What can I do to recover it? Please I really need help
EDIT: What I was trying to flash was the stock package but I did it in the wrong order
Do u have bootloader unlock code? If have, unlock bootloader, go fastboot, flash stock recovery img, then try dload/ eRecovery to restore stock firmware
John Tan said:
Do u have bootloader unlock code? If have, unlock bootloader, go fastboot, flash stock recovery img, then try dload/ eRecovery to restore stock firmware
Click to expand...
Click to collapse
Unfornately I don't have it.
Is there a way to get it? What else could I do?
Aroukan said:
Unfornately I don't have it.
Is there a way to get it? What else could I do?
Click to expand...
Click to collapse
It's not only about Bootloader, is your FRP unlocked - boot to Fastboot and read both for FRP and Phone (Bootloader), are they locked or unlocked?
If FRP is unlocked (and Bootloader locked), you can use DC Unlocker with 4 Euros credit to buy Bootloader code and to unlock the Bootloader in Fastboot:
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
But if FRP is locked, you couldn't unlock it because you cannot boot to System to Unlock OEM, hence you will have to use DC Phoenix with 15 Euros credit to unlock FRP & Bootloader and to unbrick the phone - read posts #4 to #8:
https://forum.xda-developers.com/p9/help/bypass-frp-t3879402
PS: To boot into Fastboot - switch the phone off, connect by USB to PC, press and keep pressing Volume- and then boot by Power button

Moto g6 hard brick after ota update

Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
Hold power and volume down til reboot into "bootloader" mode, plug usb-c cable to PC, then reflash later stock rom
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
Just power up directly to bootloader holding power + vol down, then reflash the latest official firmware for your device. As long as it is the official firmware for your device you don't need to unlock bootloader.
BUT if you brick it with an updated bootloader thats more recent that the OG firmware available for your device, sadly you have a cute paperweight until an official firmware with a more up to date bootloader is available. It happend once to me with a G4 Play have the device useless for a good 2 months until a firmware with a new bootloader was available. It sucks.
You have to go to the service center.
Hey msobarzoe13, I am using moto g6 and from India. When android p soak test was leaked as everyone out there, I tried it. It was good except for some network issues. So I decided to revert back to the stock firmware. I downloaded the OS and flashed it and faced the same issue. I tried several times but no luck. I was not even able to unlock the bootloader because I didn't turn on OEM unlock under settings. So I took it to the service center. The best part is by installing Beta your warranty is void. So I did it through the service center. They told Moto G6 series is very secured so flashing it with a leaked software is prevented. I don't know why. So don't take a further risk, take it to the service center.
Omar04 said:
Just power up directly to bootloader holding power + vol down, then reflash the latest official firmware for your device. As long as it is the official firmware for your device you don't need to unlock bootloader.
BUT if you brick it with an updated bootloader thats more recent that the OG firmware available for your device, sadly you have a cute paperweight until an official firmware with a more up to date bootloader is available. It happend once to me with a G4 Play have the device useless for a good 2 months until a firmware with a new bootloader was available. It sucks.
Click to expand...
Click to collapse
What you mean with "OG firmware" and what if the motorola is totally hardbricked? I mean not able to go to bootloader or recovery or even fastboot because he didnt turn on android debugging oem?
msobarzoe13 said:
Hi everyone. I have a moto g6 and I updated a few weeks ago, but the thing is that when I was flashing the stock (the 8.0 version becuase it doesn´t exist a 9.0 yet) rom via fastboot I get an error about "downgrade security", after that I try to unlock the bootloader and I found that I cant get into the os and the recovery, it apears an error "failed load kernel" and gets into the fastboot mode. I try to unlock the bootloader via adb but i can´t because i can´t get in to the recovery, only fastboot mode. I try many ways to fix this but I don´t found anything yet.
HEELPPPP
Click to expand...
Click to collapse
If your bootloader is still locked just take it to a moto service centre, I also tried downgrading and took it to service centre they fixed it
I have also hard bricked my moto g6 while updating. There was an OTA update and i started update without noticing my battery percentage. Now i have hard bricked dead moto g6. There is no response at all. Only life in my device is that it is detected as Qualcomm HS-USB QLoader 9008 in pc.
My Moto G6 went into Hard Brick after downgrade and upgrade, does not go into download mode and does not turn on, just flashes the led.
Does anyone have a solution.
Thanks.
Jefersonrr said:
My Moto G6 went into Hard Brick after downgrade and upgrade, does not go into download mode and does not turn on, just flashes the led.
Does anyone have a solution.
Thanks.
Click to expand...
Click to collapse
Same problem with me also. It may be detected as qualcomm hs-usb qloader 9008 while you connect in pc. If that is the problem than we need blank flash file which is not available right now. Either we have to send our device to service center for motherboard replacement or we need to wait for blank flash file which is not possible to come because these files are sensitive to motorola. another solution is if some one provide me mmcblk0.img of moto g6 than i might be able to boot it from sd card and may revive it again.
My Moto G6 Ali got hardbricked also plzzz help anyone solved it or have blankflash HE
Do anyone got any solution regarding this then plzzz help
:crying::crying::crying::crying::crying::crying:
Or email me at
??
[email protected]
Please help

[SOLVED]Can't enter in UPGRADE Mode

Hi guys,
i bricked my huawei p10 device.
When i try to turn on the device show "ERROR MODE" and doesn't boot.
I can enter in Fastboot Mode only.
I payed for DC Unlocker, it flashed my phone, but it needs later the device in UPGRADE Mode in order to complete the process.
i tried Vol+, Vol- and Power but it boot in "Your devices is unlocked and can't be trusted, booting now".
How i can force the upgrade mode?
thanks
Edit. SOLVED flashing by testpoint
Solved, flashing via testpoint.
crymito said:
Hi guys,
i bricked my huawei p10 device.
When i try to turn on the device show "ERROR MODE" and doesn't boot.
I can enter in Fastboot Mode only.
I payed for DC Unlocker, it flashed my phone, but it needs later the device in UPGRADE Mode in order to complete the process.
i tried Vol+, Vol- and Power but it boot in "Your devices is unlocked and can't be trusted, booting now".
How i can force the upgrade mode?
thanks
Edit. SOLVED flashing by testpoint
Click to expand...
Click to collapse
sorry tell me which board software you have flash in testpoint mode. i have try first VTR-Downgrade-Board-A067-7.0.0_r1.dgtks all ok after repair imei with hcu and try with Victoria-L29B_C432B164_Firmware_Denmark_Nonspecific_Android7.0_EMUI5.1.APP but no way to enter upgrade mode
crymito said:
Solved, flashing via testpoint.
Click to expand...
Click to collapse
Hi, can you explain that a little more please, thanks. I am trying to recover my P10 using DC Phoenix too, but it doesn't enter upgrade mode after rebooting.
Bixxyxr said:
sorry tell me which board software you have flash in testpoint mode. i have try first VTR-Downgrade-Board-A067-7.0.0_r1.dgtks all ok after repair imei with hcu and try with Victoria-L29B_C432B164_Firmware_Denmark_Nonspecific_Android7.0_EMUI5.1.APP but no way to enter upgrade mode
Click to expand...
Click to collapse
It is really necessary to repair the IMEI, my P10 is legal, it is only frozen in black screen and I have seen about the Test Point and I will try to test it from there

Categories

Resources