On all my old Samsung phones the call waiting would ring and then maybe a few seconds later ring again reminding you.
My new 21 Ultra the call waiting is like a constant beeping every second. Is there a way to change that pattern?
Also when switching over a call a box pops up asking how you want to handle the call when you are accepting the new call. 99% of the time I want to end the call and take the new call. Is there any way to bypass that screen as well?
jkhawk said:
On all my old Samsung phones the call waiting would ring and then maybe a few seconds later ring again reminding you.
My new 21 Ultra the call waiting is like a constant beeping every second. Is there a way to change that pattern?
Also when switching over a call a box pops up asking how you want to handle the call when you are accepting the new call. 99% of the time I want to end the call and take the new call. Is there any way to bypass that screen as well?
Click to expand...
Click to collapse
As far as I know, its nothing to do with the phone. Its your phone service provider and I don't think you can change it other than disabling call waiting option.
Related
Hey all...I probalby should know this as I have uses a PPC device for 2 years...but I don't remember having this issue on my last phone.
When I am on a call and get another coming in it consistently beeps/rings for the call waiting.
I have set my phone up to wait 30 seconds before going to voicemail (as I am not always around the phone). Because of this if I am in the middle of a conversation and get another call, I can't hear the other party (and am distracted myself) because my phone keeps ringing the other line for 30 seconds until the call is rejected.
When using MS Voice Command, I get the same thing with incoming announcements. If I am on the phone with Caller A and then Caller B calls, MSVC keeps saying "Incoming Call from Caller B."
I don't want to turn off Call Waiting, but I would like to change the notification so it is only a beep or something simple every 5-10 seconds and not a continuous ringing or talking.
Is the caller ID ring/tone able to be managed differently from the ring tone/announcement? What is the best way to manage this?
thanks
bumping to see if anyone has advice?
I have Same Problem With BlackStone and this annoying me so much
Any advice ?
PhoneAlarm has a setting to Vibrate for alerts while in a call.
Just curious...
I've had the phone for just over a week, and have the Kang-O-Rama bundle installed. Overall, it's awesome...
What I have noticed though is that there doesn't appear to be a tone for incoming call waiting. A couple of days ago I noticed I had a missed call/VM after I hung up on my current call. I tested it out by calling a friend and having another friend (who was with me) call me while I was in the call. There was no audible notification while in call.
I then activated the "vibrate incoming call waiting" or whatever option and that appeared to work, but still no tone. And even the vibrate may be hit and miss, as I missed another call today while on a call.
Does the Nexus One not have a call waiting tone? Is it buggy? Is it the CM ROM?
yes I am having same problem but I am using home rom.
I think I have seen this, but not quite what you describe. my phone beeps only the first time for call waiting, then it stops. maybe this is the way its supposed to be cause I like it like that.
Is your in call volume on low and is it enable in the settings? Setting-call settings-additional settings-call waiting checked.
My wife has a Touch Diamond 2 with original stock ROM from about a year ago. She has a recurring problem with incoming calls stopping ringing after 3 rings - meaning that she misses virtually all of her calls. A quick test reveals that the caller continues to hear the phone ringing after my wife's phone stops ringing.
She has Call Forwarding (in Network service settings) set to divert calls after 30 seconds, although this seems to reset itself to 15 seconds every time she reboots the phone (??).
She's in the Asda Mobile network in the UK (which I believe is based on Vodafone).
Has anyone else had this issue?
I think all of us(married males)face this problem i e ,our voice is gone when our wives appear.
The issue is your forward settings.
Bruce Inman said:
The issue is your forward settings.
Click to expand...
Click to collapse
The forward settings are to forward to voicemail after 30 seconds.
???
If you take those setting off, it will roll to Vmail in 4 rings or whatever your carrier sets it to.
The 30 secs is interferring and causing it to roll after 3.
Bruce Inman said:
If you take those setting off, it will roll to Vmail in 4 rings or whatever your carrier sets it to.
The 30 secs is interferring and causing it to roll after 3.
Click to expand...
Click to collapse
You are you saying that the 30 sec setting is effectively meaningless/useless, and that she only has the choice between 3 and 4 rings? (which is usually too short, as she never has the phone near enough to answer it that quickly!)
itm said:
You are you saying that the 30 sec setting is effectively meaningless/useless, and that she only has the choice between 3 and 4 rings? (which is usually too short, as she never has the phone near enough to answer it that quickly!)
Click to expand...
Click to collapse
Basically yes.
You can contact your provided and I think they can configure it from their end to set for more rings. There is no way to control this from the phone.
If you are in the US, you can use Google Voice. If she sets it up to forward to her cell, it will give more time to answer.
Hi All
I don't want to disable "Call waiting" but I don't like the continuous beep I get when there is a second incoming call while I am already in a call. Is there a way to disable this beep?
Thanks in advance
Mike
mcored said:
Hi All
I don't want to disable "Call waiting" but I don't like the continuous beep I get when there is a second incoming call while I am already in a call. Is there a way to disable this beep?
Thanks in advance
Mike
Click to expand...
Click to collapse
What would you like it to do to notify you? How will you know of the other call if there is no beep?
Swyped from a galaxy far far away.
joelhon said:
What would you like it to do to notify you? How will you know of the other call if there is no beep?
Swyped from a galaxy far far away.
Click to expand...
Click to collapse
I am also interested to know if the notification beep can be stopped after one or two beep. Actually its very irritating if the beep is prolonged until the other party hangs up the call.
joelhon said:
What would you like it to do to notify you? How will you know of the other call if there is no beep?
Swyped from a galaxy far far away.
Click to expand...
Click to collapse
To get notified of the second incoming call, I could have an option to vibrate the phone without getting continuous beep. I am not sure how this is possible, may be I have to try a custom ROM?
Incoming second call beeps
It’s very Annoying the beep of the incoming second call because it’s a continue beep until the call drops, is there are a way to put the beep just to hear 1 or 2 beeps?
+1 to all the above, It drives me mad, But i dont want to disable it because it could be important and i could put caller number 1 on hold and take call number 2
But usually its my mate who never puts the phone down and this beeping will go on for ever, And i cant hear much of the current call because of it.
I would like the option to have 1 or 2 beeps, just to let me know, Or intermittent vibrations... i could deal with the phone vibrating for ages, JUST NOT THE GOD DAMN BEEPING !!!!!
it makes me want to get my *beep*ing phone and smash the *beep*ing *beep* out of it lol
Cant you change it through Call Settings>Voice Call>Call Waiting? You can also change notifications through Call Settings>All Calls>Alerts on Call
Hope this helped.
EDIT: Sorry I should have read your first post better about not wanting to disable call waiting.
Sent from my A501 using XDA App
Annoying continuous beeping
joelhon said:
What would you like it to do to notify you? How will you know of the other call if there is no beep?
Swyped from a galaxy far far away.
Click to expand...
Click to collapse
The incoming call should go to VM. It's impossible to focus on your call in progress w the beeping.
Were is the answer can you disable the incoming beep?
Sometimes when someone calls me it would not let me answer call, also call waiting won't let me switch to next call. Lastly after ending the call it takes like 4 secs to fully end.
Any solutions?