After flashed pixel exp plus rom android 11, my phone can't get into recovery mode, it boot into bootloader instead of recovery. I was try to reinstall twrp but it's not work.
Sorry for my bad English. Hope you can understand my proplem.
Thanks all!
Vuong99 said:
After flashed pixel exp plus rom android 11, my phone can't get into recovery mode, it boot into bootloader instead of recovery. I was try to reinstall twrp but it's not work.
Sorry for my bad English. Hope you can understand my proplem.
Thanks all!
Click to expand...
Click to collapse
It's because you flashed the A11 fw. Solution is download stock MIUI fastboot ROM, flash it using fastboot, then you can flash Custom Recovery again. And be remember that on some custom ROMs, if you use A11 fw, your recovery will disappear again.
Btw, with K20P I suggest you to use OrangeFox
LinhBT said:
It's because you flashed the A11 fw. Solution is download stock MIUI fastboot ROM, flash it using fastboot, then you can flash Custom Recovery again. And be remember that on some custom ROMs, if you use A11 fw, your recovery will
Click to expand...
Click to collapse
LinhBT said:
It's because you flashed the A11 fw. Solution is download stock MIUI fastboot ROM, flash it using fastboot, then you can flash Custom Recovery again. And be remember that on some custom ROMs, if you use A11 fw, your recovery will disappear again.
Btw, with K20P I suggest you to use OrangeFox
Click to expand...
Click to collapse
Ơ anh zai, chỉ em cách flash fastboot được không ạ, em vẫn chưa rõ lắm
Related
Hi guys,
I tried to flash eu rom throught twrp but when flash start the phone reboots and stuck at mi logo.Can someone help me?I flash international stock rom with miflash and it succeed..I really need to flash eu rom.
Thx in advance
Even I had no luck using twrp for MIUI Roms. I guess they don't support twrp
It has to be via their stock recovery or via fastboot.
U said u installed international rom, so what is the issue?
Hello,
I'm lookig for a guide how to twrp, root and install custom rom, on my Mi5 miui 10 global stable.
I'm not newbe I did a lot of flashing on my previus phones Nexus and others. But this time I feel lost. I sit on miui 10 global stable. When I try to to flash twrp I get reroll to mi recovery every single time. All guides I found in the Internet are dedicated to older android versions. Xiaomitool don't help too.
Can someone point me to the right direction? It is time to change rom on my Mi5 finally to give him boost b4 I buy something new.
Best regards
Amonlb
amonlb said:
Hello,
I'm lookig for a guide how to twrp, root and install custom rom, on my Mi5 miui 10 global stable.
I'm not newbe I did a lot of flashing on my previus phones Nexus and others. But this time I feel lost. I sit on miui 10 global stable. When I try to to flash twrp I get reroll to mi recovery every single time. All guides I found in the Internet are dedicated to older android versions. Xiaomitool don't help too.
Can someone point me to the right direction? It is time to change rom on my Mi5 finally to give him boost b4 I buy something new.
Best regards
Amonlb
Click to expand...
Click to collapse
Your bootloader is unlocked, right?
Then you need reboot to fastboot mode and flash latest official twrp via fastboot.
Like
Code:
fastboot flash recovery <path to twrp.img>
Have you tried it that way?
Phil_Smith said:
Your bootloader is unlocked, right?
Then you need reboot to fastboot mode and flash latest official twrp via fastboot.
Like
Have you tried it that way?
Click to expand...
Click to collapse
Bootloader is unlocked.
I did it that way but after twrp is installed I reboot and there is no twrp available. Only mi recovery.
To make it easier...
I would like to:
Flash twrp
Flash magisk and root
Flash firmware (why i need this?) Havoc os asks to flash it but I don't know why.
Flash havock os and gapps
Flash some mods for camera and sound
I don't understeand why twrp can't be flashed and I have no idea what is modified firmware for? Do I need this?
Thanks for your time
Try the the xiaomi eu rom guide .
I think you may need its custom bootloader , not the actual rom.
Than flash the firmware required for your custom rom and reboot directly to recovery again from twrp than rom and gapps , I hope that helps
Hi, i had the same problem, try this:
1. Flash twrp as usual(fastboot flash recovery twrp.img and then fastboot reboot)
2. When rebooting, you have to enter at recovery (vol up + power) . Don't allow phone to boot! In TWRP official page, on installation instructions , they say after installation you must enter in recovery to allow TWRP patch recovery rom, because some Roms after boot reinstall original recovery.
3. Now you should have TWRP installed.
If you do
fastboot flash recovery twrp.img
and then do
fastboot boot twrp.img
It's simpler and it will boot to recovery and patch the ROM to be permanently installed.
amonlb said:
Bootloader is unlocked.
I did it that way but after twrp is installed I reboot and there is no twrp available. Only mi recovery.
To make it easier...
I would like to:
Flash twrp
Flash magisk and root
Flash firmware (why i need this?) Havoc os asks to flash it but I don't know why.
Flash havock os and gapps
Flash some mods for camera and sound
I don't understeand why twrp can't be flashed and I have no idea what is modified firmware for? Do I need this?
Thanks for your time
Click to expand...
Click to collapse
First,fastboot flash recovery twrp.img
and then no reboot your phone, just to hold the key combo (vol up + power), and then you can enter the twrp mode once because the recovery will be changed when your phone has rebooted.
But you can use the only once twrp mode to install the zip .
If you just want to use MIUI 10, you will flashboot twrp everytime when you need twrp to do something.
PS: Forgive me pool English.
rmrbpt said:
If you do
fastboot flash recovery twrp.img
and then do
fastboot boot twrp.img
It's simpler and it will boot to recovery and patch the ROM to be permanently installed.
Click to expand...
Click to collapse
Thanks, this worked!
I am in miui china letest stable 10.2.3.0. I want to go Eu letest beta 9.4.18. my bootloader is unlocked but no twrp installed. Now how can I go to eu beta without any problem? Which twrp should i use? Please tell me the steps. Thanks in advance
shaonirfan said:
I am in miui china letest stable 10.2.3.0. I want to go Eu letest beta 9.4.18. my bootloader is unlocked but no twrp installed. Now how can I go to eu beta without any problem? Which twrp should i use? Please tell me the steps. Thanks in advance
Click to expand...
Click to collapse
Everything is given there, just read and follow install instructions:
https://xiaomi.eu/community/threads/9-4-18.50189/
Get TWRP 1102 or 1217 to flash the EU rom and install 1227 version once new rom is flashed but before reboot system.
That means when eu rom installation will finish, then I should reboot to fastboot instead of reboot to system? And then again flash twrp 1227?
shaonirfan said:
That means when eu rom installation will finish, then I should reboot to fastboot instead of reboot to system? And then again flash twrp 1227?
Click to expand...
Click to collapse
Simply said:
For WEEKLY EU DEV rom installed with1102/1217 twrp:
if you reboot to system the rom will install well but you loose TWRP 1102/1217. AND you will not be able to reflash the new one because partition are modified with this new rom version ''(from 2018/12/27).
That' why you must install 1227 before rebooting in the rom system.
Either with fastboot or in recovery you are still in... install 1227 image.
take a coffee!
EDIT: THIS IS ONLY IF YOU INSTALL WEEKLY EU DEV ROM!
for stable you MUST keep 1102 and you can reboot dry.
8.7.12
U have to flaah 8.7.12 then update it
Thank me later
rodra_mishu said:
U have to flaah 8.7.12 then update it
Thank me later
Click to expand...
Click to collapse
Read deeply, he said is hasn't any TWRP installed!
you only throw to words, explain it better, please!
lolo9393 said:
Simply said:
For WEEKLY EU DEV rom installed with1102/1217 twrp:
if you reboot to system the rom will install well but you loose TWRP 1102/1217. AND you will not be able to reflash the new one because partition are modified with this new rom version ''(from 2018/12/27).
That' why you must install 1227 before rebooting in the rom system.
Either with fastboot or in recovery you are still in... install 1227 image.
take a coffee!
EDIT: THIS IS ONLY IF YOU INSTALL WEEKLY EU DEV ROM!
for stable you MUST keep 1102 and you can reboot dry.
Click to expand...
Click to collapse
One is suggesting me to flash twrp 1227 and then flash eu 8.7.12. then update to latest eu rom. Is it ok? Will it make any problem flashing twrp 1227 in my latest Chinese stable?
shaonirfan said:
One is suggesting me to flash twrp 1227 and then flash eu 8.7.12. then update to latest eu rom. Is it ok? Will it make any problem flashing twrp 1227 in my latest Chinese stable?
Click to expand...
Click to collapse
-1227 TWRP will NEVER boot on ANY available STABLE ROM (CHINA or EU). Try it, no risk.
lolo9393 said:
-1227 TWRP will NEVER boot on ANY available STABLE ROM (CHINA or EU). Try it, no risk.
Click to expand...
Click to collapse
I have no experience about this flashing rom. I want to follow your procedure. But one confusion. When eu rom will successfully installed, then should I go to "reboot>reboot to bootloader" in twrp? And then flash twrp 1227 with the same process of installing twrp 1102/1217?
shaonirfan said:
I have no experience about this flashing rom. I want to follow your procedure. But one confusion. When eu rom will successfully installed, then should I go to "reboot>reboot to bootloader" in twrp? And then flash twrp 1227 with the same process of installing twrp 1102/1217?
Click to expand...
Click to collapse
you stay in TWRP and install "IMAGE" of 1227.
- INSTALL/ install image/find 1227.img file/select it and select RECOVERY position in order to place it well.
But if you don't do that and reboot the rom, no problem only TWRP will be missing.
---------- Post added at 07:11 AM ---------- Previous post was at 06:49 AM ----------
lolo9393 said:
you stay in TWRP and install "IMAGE" of 1227.
- INSTALL/ install image/find 1227.img file/select it and select RECOVERY position in order to place it well.
But if you don't do that and reboot the rom, no problem only TWRP will be missing.
Click to expand...
Click to collapse
QUESTION: I am lost with you.
-What the rom reference you are going to install?
lolo9393 said:
you stay in TWRP and install "IMAGE" of 1227.
- INSTALL/ install image/find 1227.img file/select it and select RECOVERY position in order to place it well.
But if you don't do that and reboot the rom, no problem only TWRP will be missing.
---------- Post added at 07:11 AM ---------- Previous post was at 06:49 AM ----------
QUESTION: I am lost with you.
-What the rom reference you are going to install?
Click to expand...
Click to collapse
Oh, that means, I can flash twrp 1227 from twrp 1102/1217 recovery? No need pc?
lolo9393 said:
you stay in TWRP and install "IMAGE" of 1227.
- INSTALL/ install image/find 1227.img file/select it and select RECOVERY position in order to place it well.
But if you don't do that and reboot the rom, no problem only TWRP will be missing.
---------- Post added at 07:11 AM ---------- Previous post was at 06:49 AM ----------
QUESTION: I am lost with you.
-What the rom reference you are going to install?
Click to expand...
Click to collapse
I am going to install eu latest dev rom from my Chinese latest stable rom
shaonirfan said:
I am going to install eu latest dev rom from my Chinese latest stable rom
Click to expand...
Click to collapse
OK!
TWRP 1102
FORMAT DATA /yes in WIPE
LOAD EU WEEKLY DEV ROM FLASH ZIP into phone memory
FLASH latest EU weekly DEV
INSTALL 1227 TWRP before reboot the rom. (for future install)
EDIT:
Format data coming from Official rom is mandatory because this rom is encrypted and it cannot be erased during flashing operation.
Save your data before doing format data!
lolo9393 said:
OK!
TWRP 1102
FORMAT DATA /yes in WIPE
LOAD EU WEEKLY DEV ROM FLASH ZIP into phone memory
FLASH latest EU weekly DEV
INSTALL 1227 TWRP before reboot the rom. (for future install)
EDIT:
Format data coming from Official rom is mandatory because this rom is encrypted and it cannot be erased during flashing operation.
Save your data before doing format data!
Click to expand...
Click to collapse
This was not my question. Please clear my confusion. Can I flash twrp 1227 with twrp recovery 1102? Or I should again flash 1227 with pc? If i should use pc, can I go to bootloader page to flash 1227? Or can I flash 1227 staying twrp recovery without rebooting bootloader?
EDIT: Oh sorry. I have understood. Thanks for your help.
I am getting tired of trying EU rom now. Everytime I tried, like whatever they said here and eu forum.. I always end up in stuck to fastboot mode.. Never boot the eu rom.
first flash 9.5.11 fastboot rom, then flast twrp v1102,
in twrp formate data and wiper systems and others,
flash eu rom from otg.
thats all.
ZoWapBoy said:
I am getting tired of trying EU rom now. Everytime I tried, like whatever they said here and eu forum.. I always end up in stuck to fastboot mode.. Never boot the eu rom.
Click to expand...
Click to collapse
Give this method a try. I followed these steps with the help of @lolo9393
Following are the procedures that i followed to boot up Miui Eu
- Flash official 8.12.13 (Dev Fastboot Rom) through MiFlash.
- Flash TWRP 1102
- Clean Data
- Push/ Copy and Flash 8.12.20( EU Rom), it booted up finally without redirecting to Fastboot.
- Update 8.12.20 to latest available from system updater.
- Now there won't be any recovery or we aren't able to enter into available recovery even though the system boots.
- Flash TWRP 1227.
need help, I tried to flash ROM eu 9.5.23 using 9.2.16 dev ROM as the base. twrp used 1227 and after rebooting enter fastboot mode.
twrp 1102 and 1217 do not want to enter recovery only the MI display
1yang said:
need help, I tried to flash ROM eu 9.5.23 using 9.2.16 dev ROM as the base. twrp used 1227 and after rebooting enter fastboot mode.
twrp 1102 and 1217 do not want to enter recovery only the MI display
Click to expand...
Click to collapse
Flash OREO fastboot official rom 9.5.10 or 11 with MIFLASH in order to reset the partition. Install 1217 TWRP and FORMAT DATA/yes (in TWRP wipe section) Do it it twice.
Reboot recovery and load EU rom from you computer with explorer.
Install EU rom and 1227 TWRP BEFORE rebooting the rom.
Welcome to the club!
lolo9393 said:
Flash OREO fastboot official rom 9.5.10 or 11 with MIFLASH in order to reset the partition. Install 1217 TWRP and FORMAT DATA/yes (in TWRP wipe section) Do it it twice.
Reboot recovery and load EU rom from you computer with explorer.
Install EU rom and 1227 TWRP BEFORE rebooting the rom.
Welcome to the club!
Click to expand...
Click to collapse
oke i will try thanks
Hi,
I have the Mi 9T Pro global (not EU, China or India), and the only ROMs I have been able to boot are Xiaomi.eu. I've tried flashing HAVOC, Syberia Project, Evolution X and C-Droid following their instructions, the results are always the same: black screen, and TWRP becomes unaccessible, even if I try reflashing TWRP from Fastboot, it won't let me. Then I have to boot into Fastboot and flash stock ROM using Mi Flashing Tool, and flash TWRP from Fastboot again. What am I missing?
kevinyohh said:
Hi,
I have the Mi 9T Pro global (not EU, China or India), and the only ROMs I have been able to boot are Xiaomi.eu. I've tried flashing HAVOC, Syberia Project, Evolution X and C-Droid following their instructions, the results are always the same: black screen, and TWRP becomes unaccessible, even if I try reflashing TWRP from Fastboot, it won't let me. Then I have to boot into Fastboot and flash stock ROM using Mi Flashing Tool, and flash TWRP from Fastboot again. What am I missing?
Click to expand...
Click to collapse
At the point where you normally wipe data, dalvik and cache, before installing the ROM, try formatting data instead and wipe the other 2.
Robbo.5000 said:
At the point where you normally wipe data, dalvik and cache, before installing the ROM, try formatting data instead and wipe the other 2.
Click to expand...
Click to collapse
I tried formatting data, as it is part of the instructions of one of the ROMs I tried to flash, no success.
kevinyohh said:
I tried formatting data, as it is part of the instructions of one of the ROMs I tried to flash, no success.
Click to expand...
Click to collapse
What version of TWRP are you using? If you're using something different then try 3.3.1-15 from here. https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
Robbo.5000 said:
What version of TWRP are you using? If you're using something different then try 3.3.1-15 from here. https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
Click to expand...
Click to collapse
Exactly the latest one from mauronofrio, no other, as I even tried flashing Orange Fox and it never got into it, forcing me to reflash stock again to flash mauronofrio's TWRP.
I followed instructions from the ROMs I tried, none of them seem to work.
kevinyohh said:
I followed instructions from the ROMs I tried, none of them seem to work.
Click to expand...
Click to collapse
What stock ROM are you flashing?
Are you flashing on top of an Android P or 10 ROM?
Robbo.5000 said:
What stock ROM are you flashing?
Are you flashing on top of an Android P or 10 ROM?
Click to expand...
Click to collapse
I tried Android 9 Havoc, Syberia, C-Doid and Evolution X, on top of stock Miui Pie and Q.
im in the same boat buuuut, i only got TWRP to load once and cant do it again. i only have access to fastboot. anyone got the stock recovery img
AURMEND said:
im in the same boat buuuut, i only got TWRP to load once and cant do it again. i only have access to fastboot. anyone got the stock recovery img
Click to expand...
Click to collapse
Are you using Mi 9T Pro global too?
kevinyohh said:
Are you using Mi 9T Pro global too?
Click to expand...
Click to collapse
you are the same with me..im on mi 9T pro running global 10.3.1.0 PFKMIXM..no luck flashing custom rom..now my 10.3.1.0 rooted + quax kernel..even cant flash quax custom kernel on 10.3.2.0..always goes to fastboot mode after done flashing and click reboot into system via twrp..now im stuck on 10.3.1.0...also im using the latest twrp too..
Same here. I can install eu miui roms but cannot install any aosp based roms. Goes straight back to fast boot. Went back to using eu miui roms as of now.
Can anyone suggest what is going wrong. Seems like once you install an EU rom you cannot go back to any aosp roms.
I'm thinking about the vendor. I remember a post saying that our firmware or vendor are weird and try to revert to stock, and need to be patched. But I can't find that post anywhere. I've tried all suggestions: format /data, flashing Magisk, flash ROM and GAPPS and wait for boot to complete to flash Magisk (never got that far).
kevinyohh said:
I'm thinking about the vendor. I remember a post saying that our firmware or vendor are weird and try to revert to stock, and need to be patched. But I can't find that post anywhere. I've tried all suggestions: format /data, flashing Magisk, flash ROM and GAPPS and wait for boot to complete to flash Magisk (never got that far).
Click to expand...
Click to collapse
I've downloaded fastboot roms. But which vendor version?
I will try a few which i have and let u know if it works. Thanks a lot for reply
afaque_hassan said:
I've downloaded fastboot roms. But which vendor version?
I will try a few which i have and let u know if it works. Thanks a lot for reply
Click to expand...
Click to collapse
Solved. The issue is with the vendor files. I've flashed fastboot chinese rom and then installed aosp rom and it worked.
afaque_hassan said:
Solved. The issue is with the vendor files. I've flashed fastboot chinese rom and then installed aosp rom and it worked.
Click to expand...
Click to collapse
This sounds very promising - could you please link which files you used? Would be much appreciated!
Edit: Wasn't needed for me, thanks - all sorted
afaque_hassan said:
Solved. The issue is with the vendor files. I've flashed fastboot chinese rom and then installed aosp rom and it worked.
Click to expand...
Click to collapse
1. Do you have global Mi 9T Pro?
2. Could you please share the files you used and the steps, so we can all try?
Thanks in advance
Sent from my Redmi K20 Pro using Tapatalk
Also, is there any risk to brick or lose bands if flashing a Chinese vendor on a global phone? I don't want to lose the only LTE band in my country (700 b28)
Sent from my Redmi K20 Pro using Tapatalk
kevinyohh said:
Also, is there any risk to brick or lose bands if flashing a Chinese vendor on a global phone? I don't want to lose the only LTE band in my country (700 b28)
Click to expand...
Click to collapse
No you won't lose any bands. Same as you don't gain bands when flashing a global ROM on a Chinese/Indian phone
I've been trying flash pixel experience on Redmi Note 9 and it had always caused brick.
When I flash vbmeta and boot.img I can access the Recovery but system goes in bootloop. Then I flash stock boot.img for miui 12.5.2 it successfully boot system but Recovery replaced to Stock Recovery.
I flashed the system through recovery after I flashed boot.img and reboot into recovery. After that I Replaced the patched boot.img to stock one then successfully boot.
I am using PE now but can't go to the twrp.
What is wrong here I really need an answer.
Try to flash the full stock MIUI again.
VD171 said:
Try to flash the full stock MIUI again.
Click to expand...
Click to collapse
I tried 12.0.6. Same. Tried 12.0.8. Same. Tried 12.5.2. Same.
Can't flash through SPflash as last time it locked oem unlock and miunlock couldn't unlock.
Yes, you can if you are flashing the stock MIUI.