General Informational - GSI Rom - Treble Support - Android 11 - Realme X7 Max 5G

Followed this original thread - https://forum.xda-developers.com/t/gsis-status-boot-dump.4316479/
Nord 2 and realme x7 max has same configuration and specs so i tried and most of the things are working for me.
Warning :-
There are no kernel sources ( As far as we know realme they will never be released ).
There is no twrp or any kind of recovery.
There is no root available for color OS.
This is just for information so do not try it unless you can wait till you see full rom color OS rom zip for realme support page to revert back.
- Unlocked bootloader using the same way all realme devices does.
- Reboot into bootloader
- Download https://dl.google.com/developers/android/qt/images/gsi/vbmeta.img
- fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
- fastboot reboot fastboot
- fastboot flash system system-roar-arm64-ab-gapps.img
- format data and reboot
- if stuck in bootloop then again reboot to fastbootd and wipe data and reboot
- If lucky you will see the setup page.
Go to Settings -----> Phh Treble Settings
For Volte :- IMS settings ----> Install IMS APK , Enable IMS network & Force the presence of 4g Calling
Go to Misc Features
For wired headsets to work in 3.5 mm jack enable Use alternate way to detect headphones
In display - Force FPS to 120
In Backlight - enable Force alternative backlight scale"
In Camera - enable Expose Aux cameras to enable all 3 rear camera sensors
In Others - enable force-disable A2DP offload.
Working :-
Volte
Camera ( all sensors using gcam 8.1.101 wichaya V 1.4
Bluetooth ( multimedia devices with in call mic )
Stereo Speakers
120 Hz screen FPS
Fast Charging
Not working :---
Fingerprint unlock
Note :- All GSI roms should work but as i didnt test the others so not suggesting anyone to try anyone.

@vikas776.2750950 I have added stock rom so try to flash that https://bit.ly/3k6VtL4

vikas776 said:
Followed this original thread - https://forum.xda-developers.com/t/gsis-status-boot-dump.4316479/
Nord 2 and realme x7 max has same configuration and specs so i tried and most of the things are working for me.
Warning :-
There are no kernel sources ( As far as we know realme they will never be released ).
There is no twrp or any kind of recovery.
There is no root available for color OS.
This is just for information so do not try it unless you can wait till you see full rom color OS rom zip for realme support page to revert back.
- Unlocked bootloader using the same way all realme devices does.
- Reboot into bootloader
- Download https://dl.google.com/developers/android/qt/images/gsi/vbmeta.img
- fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
- fastboot reboot fastboot
- fastboot flash system system-roar-arm64-ab-gapps.img
- format data and reboot
- if stuck in bootloop then again reboot to fastbootd and wipe data and reboot
- If lucky you will see the setup page.
Go to Settings -----> Phh Treble Settings
For Volte :- IMS settings ----> Install IMS APK , Enable IMS network & Force the presence of 4g Calling
Go to Misc Features
For wired headsets to work in 3.5 mm jack enable Use alternate way to detect headphones
In display - Force FPS to 120
In Backlight - enable Force alternative backlight scale"
In Camera - enable Expose Aux cameras to enable all 3 rear camera sensors
In Others - enable force-disable A2DP offload.
Working :-
Volte
Camera ( all sensors using gcam 8.1.101 wichaya V 1.4
Bluetooth ( multimedia devices with in call mic )
Stereo Speakers
120 Hz screen FPS
Fast Charging
Not working :---
Fingerprint unlock
Note :- All GSI roms should work but as i didnt test the others so not suggesting anyone to try anyone.
Click to expand...
Click to collapse
have added stock rom so try to flash that https://bit.ly/3k6VtL4

Tried Lineage 18.1 Rom by flashing lineage-18.1-20210808-UNOFFICIAL-treble_arm64_bvS.img.xz but there was no Gapps included and there is no recovery so not able to flash the gapps but the rom worked itself.
Tried AOSP R Mod //CAOS11 by flashing caos-v312-210815-arm64-bgZ.img.xz and it is perfect.
Gapps, Root ( enable & disable ) , safety net. everything working.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Dhairy said:
@vikas776.2750950 I have added stock rom so try to flash that https://bit.ly/3k6VtL4
Click to expand...
Click to collapse
I believe this require some kind of recovery to flash which GSI roms does not provide. Do you think it is possible to flash this zip using fastboot or fastbootd ?

vikas776 said:
I believe this require some kind of recovery to flash which GSI roms does not provide. Do you think it is possible to flash this zip using fastboot or fastbootd ?
Click to expand...
Click to collapse
It will require realme flash tool.
But first we will need to decrypt the ofp.
Search how to flash ofp

I have a chinese GT Neo. Will this work? Do you have a copy of the stock rom of this chinese model?

vikas776 said:
Tried Lineage 18.1 Rom by flashing lineage-18.1-20210808-UNOFFICIAL-treble_arm64_bvS.img.xz but there was no Gapps included and there is no recovery so not able to flash the gapps but the rom worked itself.
Tried AOSP R Mod //CAOS11 by flashing caos-v312-210815-arm64-bgZ.img.xz and it is perfect.
Gapps, Root ( enable & disable ) , safety net. everything working.
View attachment 5388507View attachment 5388509View attachment 5388511View attachment 5388513View attachment 5388515View attachment 5388517
Click to expand...
Click to collapse
Tried this. And it is perfect even on the chinese version GT Neo. Thank you!

can anyone send some screenshots

Dhairy said:
can anyone send some screenshots
Click to expand...
Click to collapse
Trust me it works great.

Dhairy said:
can anyone send some screenshots
Click to expand...
Click to collapse
What kind of screenshots you are looking for ?
Anything specific do let us know.

jaymarkova said:
Tried this. And it is perfect even on the chinese version GT Neo. Thank you!
Click to expand...
Click to collapse
bro, i also using GT Neo CN Rom, can you provide more details on what's working/not when flashed new rom?

philipjan26 said:
bro, i also using GT Neo CN Rom, can you provide more details on what's working/not when flashed new rom?
Click to expand...
Click to collapse
The only thing thats not working is the fingerprint scanner. The dart charge works great too. I swear leave the china rom and get the CAOS rom. Safetynet is working and all the gapps.

vikas776 said:
Tried Lineage 18.1 Rom by flashing lineage-18.1-20210808-UNOFFICIAL-treble_arm64_bvS.img.xz but there was no Gapps included and there is no recovery so not able to flash the gapps but the rom worked itself.
Tried AOSP R Mod //CAOS11 by flashing caos-v312-210815-arm64-bgZ.img.xz and it is perfect.
Gapps, Root ( enable & disable ) , safety net. everything working.
View attachment 5388507View attachment 5388509View attachment 5388511View attachment 5388513View attachment 5388515View attachment 5388517
Click to expand...
Click to collapse
how about its Fingerprint ?

jaymarkova said:
The only thing thats not working is the fingerprint scanner. The dart charge works great too. I swear leave the china rom and get the CAOS rom. Safetynet is working and all the gapps.
Click to expand...
Click to collapse
In your opinion, you think this fingerprint will be fixed in future?

philipjan26 said:
In your opinion, you think this fingerprint will be fixed in future?
Click to expand...
Click to collapse
Fingerprint issue with Realme X7 Max 5G · Issue #1969 · phhusson/treble_experimentations
Hi, After installing AOSP 11.0 v312 fingerprint registration does not work. Only brightness increased while pressing finger on sensor. Let me know what and how to retrieve logs from my phone.
github.com
Already created ticket with the developer for our device. Hopefully we get some update. Honestly for me I totally ignored the fingerprint. Honestly leaving the Chinese software and their bugs have more pros then not having fingerprint scanner.

Hello Guys, any solution to "Device isnt Play Protect certified?" Realme GT Neo CN. Currently installed CaOs
Update: Its fine now guys

vikas776 said:
Fingerprint issue with Realme X7 Max 5G · Issue #1969 · phhusson/treble_experimentations
Hi, After installing AOSP 11.0 v312 fingerprint registration does not work. Only brightness increased while pressing finger on sensor. Let me know what and how to retrieve logs from my phone.
github.com
Already created ticket with the developer for our device. Hopefully we get some update. Honestly for me I totally ignored the fingerprint. Honestly leaving the Chinese software and their bugs have more pros then not having fingerprint scanner.
Click to expand...
Click to collapse
same here. still looking forward for that concern . i'm sick of using CN rom also.

vikas776 said:
Tried Lineage 18.1 Rom by flashing lineage-18.1-20210808-UNOFFICIAL-treble_arm64_bvS.img.xz but there was no Gapps included and there is no recovery so not able to flash the gapps but the rom worked itself.
Tried AOSP R Mod //CAOS11 by flashing caos-v312-210815-arm64-bgZ.img.xz and it is perfect.
Gapps, Root ( enable & disable ) , safety net. everything working.
View attachment 5388507View attachment 5388509View attachment 5388511View attachment 5388513View attachment 5388515View attachment 5388517
Click to expand...
Click to collapse
Do you have the realme gt neo a.26 root file brother? I can`t figure it out how to download it, i want to unlock the bootloader and try that rom.

jaymarkova said:
Trust me it works
Click to expand...
Click to collapse
Hi there, could you please share the file that unlock the bootloader I am in the a26 version of my gt neo.

Related

Mi Max 2 Android (R) 11 [Aosp-Phh]

MI MAX 2
Android 11 by DJsmk123​
1.INTRODUCTION
Well, Android 11, Google’s 11th iteration looks similar to Android 10 but with a handful of new features and changes. The update brings notification history, Chat bubbles, Conversation notifications, screen recorder, new media controls, smart device controls, one-time permission, improved dark theme with the scheduling system, app suggestions, wireless android auto, and many more....
2.Installation Guide
1.First Download AOSP11.zip
2.Now From Any recovery backup your device
Note:Recommended Recovery Orange Fox Recovery
3.Now Wipe all Partition except internal storage
4.Now Install AOSP11.zip
5.if during installation of AOSP11.zip its stuck and reboot to fastboot then try again install without wiping system its will works.
6.Reboot To System and Your Android 11 is Ready to go...
3.Workings
WiFi, Bluetooth, RIL, etc
4.Known Issues
Camera,Flashlight,Fingerprint[Major Issue but i am trying to resolve them]
5.Download Link: https://www.mediafire.com/file/b6v8nilxctnfkf5/aosp11.zip/file [Gapps Included]
6.Source
1.Rom source: https://github.com/phhusson/treble_experimentations/releases
2.Kernel Source:
https://forum.xda-developers.com/t/gsi-vendor-for-mm2-oxygen-by-team-o-8322.4139599/
as this post do not contain Kernel Source so i do not have kernel source....
Note: There is some three Major Bugs camera , Fingerprint And Flashlight and I am trying to resolve them but as i am not developer so its not easy for me
here i will provide log-cat error behind these errors and any one who is interested to resolve them his help will be appreciated as far as these errors the rom is perfect to use in daily life.....
{
CANNOT LINK EXECUTABLE "/system/vendor/bin/mm-qcamera-daemon": library "libgui.so" not found: needed by /vendor/lib/libmmcamera2_stats_modules.so in namespace (default)
CANNOT LINK EXECUTABLE "/vendor/bin/hw/[email protected]": library "libgui.so" not found: needed by main executable
CANNOT LINK EXECUTABLE "/vendor/bin/hw/[email protected]": library "libkeystore_aidl.so" not found: needed by main executable
}
Warning:I am not responsible to anything happen with your device if you are come here then you know what are you doing...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​

			
				
Nice to see A11 booted on Mi max 2. Fingerprint for mido A11 is working. The same fix used for mm2 for A10 may be it works for A11 too. Trying aosp-phh now..
Kunal panchal said:
Nice to see A11 booted on Mi max 2. Fingerprint for mido A11 is working. The same fix used for mm2 for A10 may be it works for A11 too. Trying aosp-phh now..
Click to expand...
Click to collapse
Thankyou...
I will try this.
DJsmk123 said:
Thankyou...
I will try this.
Click to expand...
Click to collapse
You should also check Mi Max2 telegram channel, there are newer kernels and roms. Perhaps you can find necessary libs from them.
DJsmk123 said:
Thankyou...
I will try this.
Click to expand...
Click to collapse
I tried your A11 with mochi fix. Fingerprint works perfectly.
Release GF3258-FP Fix · Jebaitedneko/mochi-porter
This patch ports over Vince HALs and some modded ones to other devices with Goodix-GF3258 fp sensor to enable fp functionality. Should work till A10. Take backup of /vendor before flashing. NOTE: T...
github.com
asdfg34 said:
I tried your A11 with mochi fix. Fingerprint works perfectly.
Click to expand...
Click to collapse
Pls provide me this fix link
DJsmk123 said:
Pls provide me this fix link
Click to expand...
Click to collapse
I edited my previous message.
I love my Mi Max 2 (currently with EvoX 4.7) and it's great to see ongoing development . Looking forward to trying a future release - thank you
Thats so satisfying hearing about A11 for our XIAOMI MI MAX 2.... thanks to you for working hard to give our community a good bugless rom for our MAX 2.
Hey man how are , i flashed the rom doing all the wipping , but after boot logo it says , file ayatem corrupt asking for password . I have entered the password , it says system files damaged or corrupt. What can i do
enius6 said:
Hey man how are , i flashed the rom doing all the wipping , but after boot logo it says , file ayatem corrupt asking for password . I have entered the password , it says system files damaged or corrupt. What can i do
Click to expand...
Click to collapse
I think you should try orange fox recovery and wipe all partition except internal storage now install asop11.zip
It may be go fastboot do not worry go again recovery flash asop11.zip without mount and dismount partitions.
If you find error again then send me screenshot of the error..
DJsmk123 said:
I think you should try orange fox recovery and wipe all partition except internal storage now install asop11.zip
It may be go fastboot do not worry go again recovery flash asop11.zip without mount and dismount partitions.
If you find error again then send me screenshot of the error..
Click to expand...
Click to collapse
I have done it like you said , wiped all tha partitions expect internal , clean flash using orange recovery i got this error . I have flashed again without wiping just like as you saying and got the rror again. It hasn't stuck at boot loader . I will try again and send you the screenshot
enius6 said:
I have done it like you said , wiped all tha partitions expect internal , clean flash using orange recovery i got this error . I have flashed again without wiping just like as you saying and got the rror again. It hasn't stuck at boot loader . I will try again and send you the screenshot
Click to expand...
Click to collapse
Try to flash firmware first then OS
enius6 said:
I have done it like you said , wiped all tha partitions expect internal , clean flash using orange recovery i got this error . I have flashed again without wiping just like as you saying and got the rror again. It hasn't stuck at boot loader . I will try again and send you the screenshot
Click to expand...
Click to collapse
It is because of Android security, you have to format internal sd to avoid this error.
enius6 said:
I have done it like you said , wiped all tha partitions expect internal , clean flash using orange recovery i got this error . I have flashed again without wiping just like as you saying and got the rror again. It hasn't stuck at boot loader . I will try again and send you the screenshot
Click to expand...
Click to collapse
Plz provide me screenshot as well as if possible logcat
DJsmk123 said:
MI MAX 2
Android 11 by DJsmk123​
1.INTRODUCTION
Well, Android 11, Google’s 11th iteration looks similar to Android 10 but with a handful of new features and changes. The update brings notification history, Chat bubbles, Conversation notifications, screen recorder, new media controls, smart device controls, one-time permission, improved dark theme with the scheduling system, app suggestions, wireless android auto, and many more....
2.Installation Guide
1.First Download AOSP11.zip
2.Now From Any recovery backup your device
Note:Recommended Recovery Orange Fox Recovery
3.Now Wipe all Partition except internal storage
4.Now Install AOSP11.zip
5.if during installation of AOSP11.zip its stuck and reboot to fastboot then try again install without wiping system its will works.
6.Reboot To System and Your Android 11 is Ready to go...
3.Workings
WiFi, Bluetooth, RIL, etc
4.Known Issues
Camera,Flashlight,Fingerprint[Major Issue but i am trying to resolve them]
5.Download Link: https://www.mediafire.com/file/b6v8nilxctnfkf5/aosp11.zip/file [Gapps Included]
6.Source
1.Rom source: https://github.com/phhusson/treble_experimentations/releases
2.Kernel Source:
https://forum.xda-developers.com/t/gsi-vendor-for-mm2-oxygen-by-team-o-8322.4139599/
as this post do not contain Kernel Source so i do not have kernel source....
Note: There is some three Major Bugs camera , Fingerprint And Flashlight and I am trying to resolve them but as i am not developer so its not easy for me
here i will provide log-cat error behind these errors and any one who is interested to resolve them his help will be appreciated as far as these errors the rom is perfect to use in daily life.....
{
CANNOT LINK EXECUTABLE "/system/vendor/bin/mm-qcamera-daemon": library "libgui.so" not found: needed by /vendor/lib/libmmcamera2_stats_modules.so in namespace (default)
CANNOT LINK EXECUTABLE "/vendor/bin/hw/[email protected]": library "libgui.so" not found: needed by main executable
CANNOT LINK EXECUTABLE "/vendor/bin/hw/android.hardware.[email protected]": library "libkeystore_aidl.so" not found: needed by main executable
}
Warning:I am not responsible to anything happen with your device if you are come here then you know what are you doing...
View attachment 5159823View attachment 5159825View attachment 5159827View attachment 5159829View attachment 5159837View attachment 5159833View attachment 5159835
​
Click to expand...
Click to collapse
New patchs for fingerprint
1.For Goodix Fingerprint flash Mochi-fix.zip
2.For FPC First flash Mochi-fix.zip and then fpc.fix
for Camera stay tune...
Some Android 11 Rom on the way...
DJsmk123 said:
New patchs for fingerprint
1.For Goodix Fingerprint flash Mochi-fix.zip
2.For FPC First flash Mochi-fix.zip and then fpc.fix
for Camera stay tune...
Some Android 11 Rom on the way...
Click to expand...
Click to collapse
I don't know what the problem might be with the camera but do you have any idea when that might be fixed please?
Thanks for your work.
thewizardoz said:
I don't know what the problem might be with the camera but do you have any idea when that might be fixed please?
Thanks for your work.
Click to expand...
Click to collapse
This vendor image based on android 9 and android 10(Not perfectly) so all libs of camara not working perfectly with android 11 system libs and for updating libs I have to find them and link to system.
Actually i am working on this phone it's sad that I have no extra phone for my personal use.
I can't say how much time...
Thanks for your appreciation
[delete]

[ROM] [11] [RMX1971] Havoc-OS For Realme 5 Pro [OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About :-
Havoc-OS is an after-market firmware based on Android Open Source Project,
inspired by Google Pixel with a refined Material Design 2 UI.
We offer a smooth and stable experience for your device with a selected
set of amazing features that provide an exceptional user experience.
Team :-
Founder & Lead Developer:
SKULSHADY (Anushek Prasal)
DevOPS & Scaling:
Irongfly (Sukeerat Singh Goindi)
Support Team:
theo.j22 (Tushar Jain)
Donate :-
If you like our work and would like to support this project then please consider donating.
PayPal: https://www.paypal.me/ANUSHEK
UPI: [email protected]
Links :-
Download :- Here
Havoc-OS Official Website :- Here
Device Support Group :- Here
Official Support Group :- Here
Announcements Channel :- Here
CLEAN FLASH :-​Download the latest build (Gapps or Vanilla ) and Gapps for vanilla build​Reboot to recovery​Wipe System, Data, Cache, Dalvik and Vendor.​Flash the latest build and GApps (on non Gapps build if needed)​Format Data by typing YES.​Reboot.​​DIRTY FLASH :-​Download the latest build (gapps or non Gapps)​Reboot to recovery​Flash the latest build​Wipe Cache​Reboot​Known issues :-​Nothing yet
Let me know, if you find any.​Source Changelog :- Here​
Device Changelog :-
Initial Official Release.
Added KCAL.
June Security Patch.
Bump to June RedFin FP.
Kernel Upstreamed to 4.9.2272.
Fixed 2% battery drop issue.
Added FPS QS tile.
KharaMe Parts now follow accent colour.
•Android version: 11
•Security patch level: June 2021
•Build author/Device Maintainer: Krish Walecha
•Device Source code: https://github.com/KrishWalecha
•Source code: https://github.com/Havoc-OS​
I'm a fan of Havoc OS Rom since i used it on my Samsung galaxy Note 3 4G (N9005) android 9 & 10.
This rom is awesome it's my third day of using rom on RM 5 pro. with no bugs till now.
I've some requests :
1- Quick setting doesn't 've option or button for adaptive brightness.
2- The recent doesn't 've option to view free memory/all memory.
3- In the old Havoc os for (N9005) there was an option on buttons to customize a button to Kill app.
This the options i remember now and i feel comfort with these ones.
1 :- it used to have in 4.3, after that it was nuked for some reasons.
2 :- the default launcher provides an option to clear all, it's there by default.
Glad that you liked the ROM
Krishwalecha098 said:
1 :- it used to have in 4.3, after that it was nuked for some reasons.
2 :- the default launcher provides an option to clear all, it's there by default.
Glad that you liked the ROM
Click to expand...
Click to collapse
I know , in recent there is a clear all button , but i asked about viewing free memory such
"1.3 GB free /4GB Ram"
Mstf_Ata said:
I know , in recent there is a clear all button , but i asked about viewing free memory such
"1.3 GB free /4GB Ram"
Click to expand...
Click to collapse
Oh, my bad. You can use 3rd party launchers like OnePlus launcher, AOSP launchers don't have that feature sadly.
I faced a problem may be it's a bug
1. when i connect whatsapp web on PC , the notification sound continuously ring every a bit of seconds and i solved it to make this notification as silent.
2. In spite of making the notification silent when sharing a video to someone via whatsapp web the notification sound continuously ring twice a second and i solved it to make this notification as silent.
Mstf_Ata said:
I faced a problem may be it's a bug
1. when i connect whatsapp web on PC , the notification sound continuously ring every a bit of seconds and i solved it to make this notification as silent.
2. In spite of making the notification silent when sharing a video to someone via whatsapp web the notification sound continuously ring twice a second and i solved it to make this notification as silent.
Click to expand...
Click to collapse
Okay...maybe some issues from WhatsApp. I'll take a look into it.
Hi! Thanks for finally bringing android 11 to r5p. Could you tell me how to upgrade from havoc os 9 to this version ? Do i need to flash realme ui first ?
ragilcepot said:
Hi! Thanks for finally bringing android 11 to r5p. Could you tell me how to upgrade from havoc os 9 to this version ? Do i need to flash realme ui first ?
Click to expand...
Click to collapse
No, you just need to flash latest rui firmware.
unstable network connection both mobile data and wifi
Been enjoying this rom quite a lot! Thanks!
Anyway, how do you do OTA ? will it erase all my data ?
What steps to do OTA ?
is there any way to disable scoped storage i got force stop each time opening minecraft ?
TIA
SERIOUSLY BRICKED!!! HELP!!
I wanted to flash havoc, I was on latest firmware F.03 but with stock recovery and unlocked bootloader and i tried to flash through fastboot blabus twrp 20202802 recovery and i ended up on bootloop. I m not sure if i flashed vbmeta together or after i realized that i was on bootloop.
Anyway i found a guide on flashing ofp files through fastboot. So i downloaded C.04 update, extracted the .img files below,
Boot
System
Vbmeta
Vendor
and after flashing them....nothing new hapenned. Still on fastboot, no boot, no recovery.
I have tried all kind of random flashes since then that i found on the net but nothing worked.
Anyone have had this issue before???
Curious_guy said:
SERIOUSLY BRICKED!!! HELP!!
I wanted to flash havoc, I was on latest firmware F.03 but with stock recovery and unlocked bootloader and i tried to flash through fastboot blabus twrp 20202802 recovery and i ended up on bootloop. I m not sure if i flashed vbmeta together or after i realized that i was on bootloop.
Anyway i found a guide on flashing ofp files through fastboot. So i downloaded C.04 update, extracted the .img files below,
Boot
System
Vbmeta
Vendor
and after flashing them....nothing new hapenned. Still on fastboot, no boot, no recovery.
I have tried all kind of random flashes since then that i found on the net but nothing worked.
Anyone have had this issue before???
Click to expand...
Click to collapse
I don't know this work for you or not , but this work for me.
First flash TWRP with fastboot
Then flash vbmeta
It's will fix recovery
Then flash The ROM.
Hope that fix your problem
JodieMarch said:
I don't know this work for you or not , but this work for me.
First flash TWRP with fastboot
Then flash vbmeta
It's will fix recovery
Then flash The ROM.
Hope that fix your problem
Click to expand...
Click to collapse
Thanks for your replly,
i tried it but it didnt work.
i have also tried to use fastboot erase commands such as:
fastboot erase recovery
fastboot erase system
etc...
to completely clean the phone and flash over through fastboot img but didnt work too.
i starting thinking buying a new phone...
Curious_guy said:
Thanks for your replly,
i tried it but it didnt work.
i have also tried to use fastboot erase commands such as:
fastboot erase recovery
fastboot erase system
etc...
to completely clean the phone and flash over through fastboot img but didnt work too.
i starting thinking buying a new phone...
Click to expand...
Click to collapse
You just need your recovery back first , try orangefox or other TWRP until you can use recovery
Then you just need to try flashing ROM .
Try 2 different type first try ROM with color os support and RUI support
JodieMarch said:
You just need your recovery back first , try orangefox or other TWRP until you can use recovery
Then you just need to try flashing ROM .
Try 2 different type first try ROM with color os support and RUI support
Click to expand...
Click to collapse
i tried orange fox, twrp blabus old and new, several stock recovery, nothing worked. I'm trying now to extract from ozip stock firmware c15 vendor boot recovery and system through python, hope it works..
i ll let you know how this will end up.
For your information, i completely bricked my phone, not opening-restarting etc, flashing ofp file on fastboot didnt work, flashing every custom recovery that i found with or without vbmeta didnt work, clearing everything with fastboot erase commands and flashing all over again didnt work, so im back to 0.
If anyone can help, i would be thankfull.
Hello all, i want to try Havoc OS on my Realme 5 Pro but i have a few questions:
1-Does it suport the 20W fast charging?
2-Does it support Widevine L1?
3-Does it comes with a FM radio app?
Thank you
Hi, can the stock camera of realme 5 pro run on ROM?

[STABLE] [11] dotOS 5.2 with Material You

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Dotos?
dotOS is an Android ROM which focuses on performance and stability. We focus on making our rom look and feel great without struggling on Performance and Battery! So that one can get most out of his/her device.....
(to fix fingerprint send me a direct message ill tell you the fix)
Make Sure You Have TWRP 3.6.0
Download the latest build (gapps included)
Reboot to recovery
format data
flash multidisabler
Flash the ROM and Kernel (the one linked below)
Flash Magisk (Magisk) (only this one)
Reboot
extract zip
flash!
Code:
Your warranty is now void.
* I am not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
------------------------------------------------------------Bugs and their Workarounds-----------------------------------------------------------------
Read all the steps correctly
BUGS:- bluetooth ear/headphones do not work workaround- ( go into phh treble settings misc features and enable force-disable a2dp offload (thanks to @Lil_Boudy for figuring it out!)
If bluetooth crashes your system disable media recommendations under Sound & Vibration > Media > Show media recommendations
mtp not working (mtp does work in twrp and in some custom kernels the one linked here does not fix mtp as it is not changing too many things compared to other custom kernels which brick some phones)
sim 1 incoming and outgoing does not work (you can revieve calls and call but you wonth hear anything nor will your mic go trying to fix) (workaround is to put your sim into slot 2) (i have heard that other people dont have this issue so i guess try your luck)
DO NOT let the phone die of battery you will not be able to boot and it will be hard to get back into the system (workaround- in magisk install acca https://github.com/Magisk-Modules-Repo/acc and install this apk after installing https://github.com/MatteCarra/AccA then set profile to default (this will shut down the phone at 5% hence removing the risk of your phone not booting after hitting 0%
You tell me
Links
Kernel A71 Download
Source (Kernel Source)
https://github.com/topjohnwu/Magisk/files/7819803/app-debug.zip (magisk)
shorturl.at/uAKO2 (download rom)
-------------------------------------------------------------------------Boot-fix and tweaks-------------------------------------------------------------------
Zainullah Boot fix (if you cant boot)
install oneui boot into oneui change date to 3 months from now
check for updates
boot into download mode
flash twrp 3.6.0 and vbmeta
boot into twrp
do format data
flash multidisabler
flash rom
flash kernel as boot
do factory reset
reboot
if it boots you into fastboot shutdown flash twrp only and try another factory reset and reboot (In twrp)
Gcam: https://www.celsoazevedo.com/files/android/google-camera/dev-bsg/f/dl61/
apply this config https://www.celsoazevedo.com/files/android/p/f/2021/11/BSG-A71-GV1h.xml
and this LIB https://f.celsoazevedo.com/file/cfiles/gcm1/morgenmanlibv6.so
also enable extra cameras in phh treble settings - samsung settings for ultrawide
Get fast charging
by default a71 on pe charges really slow this enables fast charging for the a71 on dotos
to install download from https://drive.google.com/file/d/1KguCeLD-VHShm0MYzKhYrsAv-rZAuJeA/view?usp=sharing
Now install the module it will ask you to use volume keys follow the insturctions and choose 4500mah 27w once installed reboot! now enjoy faster charging (note: this will not affect battery/ will barely affect battery )
Increase performance and increase battery! (apps by feravolt and gloeysik)
Step 1
- Uninstall ANY OTHER KERNEL MANAGER app including smartpack/Ktweaks to avoid conflict, since this app uses AI and machine learning to dynamically boost performance when needed
- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip
- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases
- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.
- Go to the settings tab and use the AUTO settings for FDE AI.
install gms doze magisk module
GitHub - gloeyisk/universal-gms-doze: Optimized and adjusted Google Play services​Optimized and adjusted Google Play services. Contribute to gloeyisk/universal-gms-doze development by creating an account on GitHub.
github.com
install cloudflaredns4magisk
[MODULE] CloudflareDNS4Magisk​Hello, As John Graham-Cumming announced, Cloudflare now offers its own DNS service. And surprise of the Boss if we believe his words: your history of browsing isn't saved on their servers ! DNS ?? Gne ?? What's this ? To make it...
forum.xda-developers.com
install adaway (optional if you want ads or not) , allow superuser for it download this https://energized.pro/bluGo/formats/filter in adaway click he button in the middle click add click file and add the file then go back to the main menu and click the reload button now https://adaway.org/
also enable extra cameras in phh treble settings - samsung settings for ultrawide
install universal safteynet fix zygsik to get safteynet working
all credits go to the dotos team!
also thanks to Mohan for developing the gsi!
mohancm - Overview
{ "Android Engineer", "Tech Evangelist" }. mohancm has 171 repositories available. Follow their code on GitHub.
github.com
Does it have status bar icon settings.
a bit buggy but ok
TigerLake said:
a bit buggy but ok
Click to expand...
Click to collapse
Does android 12 dot os have this status bar mod
Fingerprint display doesn't work in this rom
Fod not working A71 doesn't have fingerprint sensor in back bro.
Youmeko said:
Fingerprint display doesn't work in this rom
Click to expand...
Click to collapse
yup
even tigerlake one is same
Youmeko said:
Fod not working A71 doesn't have fingerprint sensor in back bro.
Click to expand...
Click to collapse
Damn, guess fod is still not working then for Zain rom
Youmeko said:
Fod not working A71 doesn't have fingerprint sensor in back bro.
Click to expand...
Click to collapse
Try using my version of dotOS
Its ask for fingerprint from backsensor bro not on screen in dotos.
I am not gonna download your rom waste time in fod your also will not work bro @TigerLake
TigerLake said:
Try using my version of dotOS
Click to expand...
Click to collapse
yours does not have fod either lol stop faking
Youmeko said:
I am not gonna download your rom waste time in fod your also will not work bro @TigerLake
Click to expand...
Click to collapse
yup
TigerLake said:
Damn, guess fod is still not working then for Zain rom
Click to expand...
Click to collapse
ofc its a dotos thing
if dotos was android 12 it would work
Zainullahk1234 said:
yup
ofc its a dotos thing
if dotos was android 12 it would work
Click to expand...
Click to collapse
I am working on fixing fod for my dotos rom.
TigerLake said:
I am working on fixing fod for my dotos rom.
Click to expand...
Click to collapse
same

Android 12 Pixel expereience for A70 (All models) (FOD Working) (gsi)

What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 12.0 (11 is available but 12 has no difference in terms of issues and is faster an the better ui and everything else of course)
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:- bluetooth ear/headphones do not work workaround- ( go into phh treble settings misc features and enable force-disable a2dp offload (thanks to @Lil_Boudy for figuring it out!)
If bluetooth crashes your system disable media recommendations under Sound & Vibration > Media > Show media recommendations
mtp not working (mtp does work in twrp and in some custom kernels the one linked here does not fix mtp as it is not changing too many things compared to other custom kernels which brick some phones)
sim 1 incoming and outgoing does not work (you can revieve calls and call but you wonth hear anything nor will your mic go trying to fix) (workaround is to put your sim into slot 2) (i have heard that other people dont have this issue so i guess try your luck)
DO NOT let the phone die of battery you will not be able to boot and it will be hard to get back into the system (workaround- in magisk install acca https://github.com/Magisk-Modules-Repo/acc and install this apk after installing https://github.com/MatteCarra/AccA then set profile to default (this will shut down the phone at 5% hence removing the risk of your phone not booting after hitting 0%
You tell me
Links
https://github.com/Qiangong2/android_kernel_samsung_a70q (Kernel Source)
https://github.com/topjohnwu/Magisk/files/7819803/app-debug.zip (magisk)
Rom download.
https://forum.xda-developers.com/t/...custom-extreme-kernel-for-galaxy-a70.4174819/ (custom kernel)
1.Need TWRP 3.4.0 or higher!
2. Unpack the "xz" archive and put the .img file onto the sd card or internal (if you dont have a sd card do step 3 then transfer the img file to your phone)
3. In TWRP head to factory reset format type yes and hit enter
4. Flash the img file (as system obviously)
5 flash kernel (optional but you should flash for best performance!)
5.45 install magisk (the one linked above only) (optional but you should as a lot of modules are listed here are very important (ie the acc module and the fast charging module)
5.5.Reboot and enjoy!
Zainullah Boot fix (if you cant boot)
install oneui boot into oneui change date to 3 months from now
check for updates
boot into download mode
flash twrp 3.6.0 and vbmeta
boot into twrp
do format data
flash multidisabler
flash rom
flash kernel as boot
do factory reset
reboot
if it boots you into fastboot shutdown flash twrp only and try another factory reset and reboot (In twrp)
Gcam: Download
apply this config https://www.celsoazevedo.com/files/android/p/f/2021/09/luke-A70-BSG-GV1.xml
also enable extra cameras in phh treble settings - samsung settings for ultrawide
Get fast charging
by default a70 on pe charges really slow this enables fast charging for the a70 on pixel experience
to install download from https://drive.google.com/file/d/1KguCeLD-VHShm0MYzKhYrsAv-rZAuJeA/view?usp=sharing
Now install the module it will ask you to use volume keys follow the insturctions and choose 4500mah 27w once installed reboot! now enjoy faster charging (note: this will not affect battery/ will barely affect battery )
Increase performance with better battery! (apps and modules by feravolt and gloeyisk)
Step 1
- Uninstall ANY OTHER KERNEL MANAGER app including smartpack/Ktweaks to avoid conflict, since this app uses AI and machine learning to dynamically boost performance when needed
- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip
- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases
- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.
also type in /extraopt everything (do this once a week )
- Go to the settings tab and use the AUTO settings for FDE AI.
install gms doze magisk module
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GitHub - gloeyisk/universal-gms-doze: Optimized and adjusted Google Play services​Optimized and adjusted Google Play services. Contribute to gloeyisk/universal-gms-doze development by creating an account on GitHub.
github.com
install cloudflaredns4magisk
[MODULE] CloudflareDNS4Magisk​Hello, As John Graham-Cumming announced, Cloudflare now offers its own DNS service. And surprise of the Boss if we believe his words: your history of browsing isn't saved on their servers ! DNS ?? Gne ?? What's this ? To make it...
forum.xda-developers.com
install adaway (optional if you want ads or not) , allow superuser for it download this https://energized.pro/bluGo/formats/filter in adaway click he button in the middle click add click file and add the file then go back to the main menu and click the reload button now https://adaway.org/
also enable extra cameras in phh treble settings - samsung settings for ultrawide
install universal safteynet fix zygsik to get safteynet working
ALL credit goes to phusson , ponces and rest of the devs
Blog
Pixel Experience
Donate
jhenrique09
phhusson
AndyYan
eremitein
ponces
I have 2 questions for you. 1- where is the link to download the ROM, 2- how can I flash the kernel as bootable if it is in .zip (Zainullah Boot fix)
marriqnetr said:
I have 2 questions for you. 1- where is the link to download the ROM, 2- how can I flash the kernel as bootable if it is in .zip (Zainullah Boot fix)
Click to expand...
Click to collapse
link is in download
it is in xz format extract it with an app and flash image as system
next release will have ota updates! ( without twrp or orangefox)
please, copy link to download under my message. I badly understand you, because i russian
marriqnetr said:
please, copy link to download under my message. I badly understand you, because i russian
Click to expand...
Click to collapse
Releases · zainullahk/universal-pixelexperience-samsung
this is pixel experience by ponces think of this as a mirror but tailored to samsung devices - zainullahk/universal-pixelexperience-samsung
github.com
Хорошо, вот ссылка для скачивания, просто скачайте последнюю версию, извлеките файл xz и прошейте как систему в TWRP
Translated by GT: Ok here is the download link, just download the latest version, extract the xz file and flash as a system in TWRP
я всё сделал, как по иструкции, но телефон бесконечно перезагружается. Я пробовал твой вариант решения, но он не сработал. Могу ли я связаться с тобой ? (Telegram например)
Translated by GT: I did everything as per the instructions, but the phone endlessly reboots. I tried your solution, but it didn't work. May I contact you? (Telegram for example)
yes join this group (my name is ajex on the group)
Samsung Galaxy A71 Mods & Releases
@A715XX @sammya71 Join there if you need any help.
t.me
Does adaptive brightness work for you? It doesn't work on my A70.
Also, Device won't show on adb devices on windows.. Am I missing drivers or something?
IBastawisi said:
Does adaptive brightness work for you? It doesn't work on my A70.
Also, Device won't show on adb devices on windows.. Am I missing drivers or something?
Click to expand...
Click to collapse
adaptive brightness wont work on a70
adb devices do you have usb debugging enabled? if it still does not work try another kernel
No matter what I do, the phone won't boot after flashing. I can flash multidisabler just fine with stock rom installed, but if I try to flash or wipe anything after installing PE it fails to mount system_root and when I try to boot TWRP says that I don't have system installed. Is there any fix for that?
VanchPL said:
No matter what I do, the phone won't boot after flashing. I can flash multidisabler just fine with stock rom installed, but if I try to flash or wipe anything after installing PE it fails to mount system_root and when I try to boot TWRP says that I don't have system installed. Is there any fix for that?
Click to expand...
Click to collapse
ah yes i do have a fix
format data and flash this https://github.com/zainullahk/A71-P...4-ab-vndklite-12.0-20220208-UNOFFICIAL.img.xz
Zainullahk1234 said:
ah yes i do have a fix
format data and flash this https://github.com/zainullahk/A71-Pixel-expereince/releases/tag/v401#:~:text=PixelExperience_arm64-ab-vndklite-12.0-20220208-UNOFFICIAL.img.xz
Click to expand...
Click to collapse
does both sim(incall sound) works??
I am using PixelExperience v401 no luck with sim2(incall sound). Any fix....??
MarvinMod said:
None.
Click to expand...
Click to collapse
who said so?
the bug is in the works
lovefaruk112 said:
does both sim(incall sound) works??
I am using PixelExperience v401 no luck with sim2(incall sound). Any fix....??
Click to expand...
Click to collapse
No and it will never work unless on stock. I have worked on custom rom for this device for almost 2 years, deleted all my work because its pointless in my opinion. Most of the current bugs for the A70 will NOT be able to fix, sim 2 included. Camera is another. Its always a work in progress but unless you write the whole software yourself, some things on the A70 will never be fixed.
Mark my words, no sim 2 and full camera 32mp will never be fixed for the A70 accept for the stock rom unless Samsung releases the drivers and software.
Understand that I would rather custom over stock for sure and all these roms and kernals are of good work and that im not trying to deter or prevent anyone from using custom software.
MarvinMod said:
No and it will never work unless on stock. I have worked on custom rom for this device for almost 2 years, deleted all my work because its pointless in my opinion. Most of the current bugs for the A70 will NOT be able to fix, sim 2 included. Camera is another. Its always a work in progress but unless you write the whole software yourself, some things on the A70 will never be fixed.
Mark my words, no sim 2 and full camera 32mp will never be fixed for the A70 accept for the stock rom unless Samsung releases the drivers and software.
Understand that I would rather custom over stock for sure and all these roms and kernals are of good work and that im not trying to deter or prevent anyone from using custom software.
Click to expand...
Click to collapse
Thanks bro for the information.
Actually I don't have problem with camera coz trCamera app is an option. But for Sim2 Call i didn't find any fixes..
Zainulhak's Custom GSI rom for A12 working calls on sim2 but not in Sim1(as mentioned above).
So I am just hoping may be someday some developer will manage to fix or may be its fixed but we do not know the exact solution.
....LET'S HOPE FOR THE BEST...
do you recommend installing it as daily driver on main phone?
uQlel said:
do you recommend installing it as daily driver on main phone?
Click to expand...
Click to collapse
No
uQlel said:
do you recommend installing it as daily driver on main phone?
Click to expand...
Click to collapse
yes its much better than oneui
MarvinMod said:
No
Click to expand...
Click to collapse
didnt ask you
Zainullahk1234 said:
yes its much better than oneui
Click to expand...
Click to collapse
but... it has problem with calls and bluetooth headphones, I want to use my bluetooth headphones and call, its verry important for me

[Update 10/1/23][Official][Full One UI 4.1 Port] LmaoCatOS Havana Brown For Galaxy M51

Hi!,
I've Made An Full One UI Port From A71 To M51,
It Really New And Take Me Just Only 3 Day To Make
So Here Is Features
All A71 Features (No Video Call Effects Or Any Hardware Related Features)
Goodlock Fully Compatible
Bixby Fully Compatible
Secure folder working
Debloated (system,product)
Full Smart Widgets And Smart Suggestions
Flagship Edge Lighting Effects
Better System Performance
build.prop Tweaks (System,Vendor)
Flagship Camera Features (Better HDR,Pro Video)
Dolby On Speaker
Change Lens While Recording Video (Wide To Ultra Wide, Ultra Wide To Wide While Recording Video)
And More!
Bugs:
NFC
Hotspot name can’t be change (not confirmed)
How To Install
Flash zip in recovery
Format data
(Optional, Flash Magisk v24)
reboot and enjoy!
Download Links
LmaoCatOS Havana Brown
LmaoCatOS Havana Brown M51.zip
drive.google.com
Kernel Source:
No Kernel Included,
Samsung Open Source
opensource.samsung.com
Notes:
Connect To Wifi After Done Setup, Or You Will Greeted With Download Mode Jumpscare After Rebooted
Credits:
@TarunPARASHAR (tg username) For Testing And Donating (Buy Me BNG Mods)
@Yillié DynaPatch
@LMAO-guy Your Help
Support Group (note:You Can Also Ask Question Here Under This Thread)
TukiRom and Labrador Support Group
Nothing, Just Come Back Of A Development Support both LabradorOS and TukiRom My Support Devices: M31 Work To Do: None If You Want To PM, @FlylarbTheBMO Rules: English,Thai Allowed No Investment Off-Topic Allowed
t.me
Spoiler: Some Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks,
Flylarb The BMO
Flylarb said:
Hi!,
I've Made An Full One UI Port From A71 To M51,
It Really New And Take Me Just Only 3 Day To Make
So Here Is Features
All A71 Features (No Video Call Effects Or Any Hardware Related Features)
Goodlock Fully Compatible
Bixby Fully Compatible (Not Preload, Install Yourself) (Only Routines Were Preloaded)
Debloated (system,product)
Full Smart Widgets And Smart Suggestions
Flagship Edge Lighting Effects
Better System Performance
build.prop Tweaks (System,Vendor)
Flagship Camera Features (Better HDR,Pro Video)
Dolby On Speaker
Change Lens While Recording Video (Wide To Ultra Wide, Ultra Wide To Wide While Recording Video)
And More!
Bugs:
Not Found Yet, Will Update If Found
How To Install
Flash These In Recovery (Twrp,Ofox)
flash DynaPatch if u didnt flash before
Flash A71port.img in System partition
Flash A71vendor.img In Vendor partition
flash A71odm.img in Odm Partition
flash A71product.img in Product Partition
wipe data
(Optional, Flash Magisk v24)
reboot and enjoy!
in case you use chondoe,
rename:
A71port.img to system.img
A71vendor.img to vendor.img
A71product.img to product.img
A71odm.img to odm.img
Download Links
A71port.img
A71port.img
drive.google.com
A71product.img
A71product.img
drive.google.com
A71odm.img
A71odm.img
drive.google.com
A71vendor.img
A71vendor.img
drive.google.com
I Will Add Installer Later
Kernel Source:
No Kernel Included,
Samsung Open Source
opensource.samsung.com
Notes:
Connect To Wifi After Done Setup, Or You Will Greeted With Download Mode Jumpscare After Rebooted
Credits:
@TarunPARASHAR (tg username) For Testing And Donating (Buy Me BNG Mods)
@Yillié DynaPatch
@LMAO-guy Your Help
Support Group
TukiRom and Labrador Support Group
Nothing, Just Come Back Of A Development Support both LabradorOS and TukiRom My Support Devices: M31 Work To Do: None If You Want To PM, @FlylarbTheBMO Rules: English,Thai Allowed No Investment Off-Topic Allowed
t.me
You Can Also Ask Question Here Under This Thread
Spoiler: Some Screenshot
View attachment 5724599
View attachment 5724601
View attachment 5724603
View attachment 5724605
Thanks,
Flylarb The BMO
Click to expand...
Click to collapse
Hello, Developer
I have installed this rom successfully on my device ! Thank you first of all...
and the bugs i have noticed are:
Power menu doesnt come after long press of power button so, pls fix it
Software Update removed from settings
front camera shows different pic and clicks the different
front camera animation is like its have notch
Good lock is not supported , Galaxy store says: Content is not supported for your device.
Edit: NFC also doesnt work properly
the position of battery charging information is slightly located at upper side as compared to original
Thanking you again
Sankalp Devkar said:
Hello, Developer
I have installed this rom successfully on my device ! Thank you first of all...
and the bugs i have noticed are:
Power menu doesnt come after long press of power button so, pls fix it
Software Update removed from settings
front camera shows different pic and clicks the different
front camera animation is like its have notch
Good lock is not supported , Galaxy store says: Content is not supported for your device.
Edit: NFC also doesnt work properly
the position of battery charging information is slightly located at upper side as compared to original
Thanking you again
Click to expand...
Click to collapse
Hello,
Power Menu Is Not A Bug, You Had To Press Power+Vol Down Bec It Will Trigger Bixby (Not Installed) So It Wont Do Anything Without Press Vol Down
Software Update Yeah, It Wont Work So I Removed
Front Camera Show Diffrent Pictures What You Mean?/Animation Bec Floating, Fixed On Next Build
Goodlock Didnt Support,
Did You Install A71odm.img,A71product.img?
And Vendor Also
And Mostly Did You Clean Flash?
Battery A Bit Upper Bec Overlay, It Can Be Fix But It Will Broke Something So
NFC Will Fix On Next Build
Sorry
Sankalp Devkar said:
Hello, Developer
I have installed this rom successfully on my device ! Thank you first of all...
and the bugs i have noticed are:
Power menu doesnt come after long press of power button so, pls fix it
Software Update removed from settings
front camera shows different pic and clicks the different
front camera animation is like its have notch
Good lock is not supported , Galaxy store says: Content is not supported for your device.
Edit: NFC also doesnt work properly
the position of battery charging information is slightly located at upper side as compared to original
Thanking you again
Click to expand...
Click to collapse
can you tell me the installation steps dude. is twrp enough for this? Do I need to install chondoe flasher? thank you.
forjest63 said:
can you tell me the installation steps dude. is twrp enough for this? Do I need to install chondoe flasher? thank you.
Click to expand...
Click to collapse
Yes Only TWRP but install dynapatch too
Is there a secure folder? thank you.
forjest63 said:
Is there a secure folder? thank you.
Click to expand...
Click to collapse
add later in next build
didn't include now (note that u can install it manually)
Flylarb said:
Yes Only TWRP but install dynapatch too
Click to expand...
Click to collapse
can you tell me the installation of your rom step by step?
javier4554 said:
can you tell me the installation of your rom step by step?
Click to expand...
Click to collapse
ye
so what step u need?
I installed the rom on my phone. The rom is very fast and fluent, good job. For now, NFC is not working and the camera is crashing. A few Samsung apps are not updating
Flylarb said:
ye
so what step u need?
Click to expand...
Click to collapse
I have downloaded your files, i am in stock rom, next steps?
forjest63 said:
can you tell me the installation steps dude. is twrp enough for this? Do I need to install chondoe flasher? thank you.
Click to expand...
Click to collapse
I flashed it via twrp,
First, I downloaded twrp from here: https://forum.xda-developers.com/t/...i3-1-twrp-3-5-1_10-0-for-samsung-m51.4249719/
Then i flashed it via odin
After that i downloaded Dmverity force encrypt disabler, multidisabler 12, dyna patch,chondoe_flasher
Flashed dmverity+multidisabler+Dyna patch and moved all rom files in same folder as chondoe_flasher
Rename all files as follows :
A71port.img to system.img
A71vendor.img to vendor.img
A71product.img to product.img
A71odm.img to odm.img
Flash chondoe_flasher and you're ready to go !
Sankalp Devkar said:
I flashed it via twrp,
First, I downloaded twrp from here: https://forum.xda-developers.com/t/...i3-1-twrp-3-5-1_10-0-for-samsung-m51.4249719/
Then i flashed it via odin
After that i downloaded Dmverity force encrypt disabler, multidisabler 12, dyna patch,chondoe_flasher
Flashed dmverity+multidisabler+Dyna patch and moved all rom files in same folder as chondoe_flasher
Rename all files as follows :
A71port.img to system.img
A71vendor.img to vendor.img
A71product.img to product.img
A71odm.img to odm.img
Flash chondoe_flasher and you're ready to go !
Click to expand...
Click to collapse
Yes Thanks
Flylarb said:
Yes Thanks
Click to expand...
Click to collapse
Sir pls fix one ui home, its lagging after restarting camera access
And tell me how to change the radius of edge lightning
Thank you
Sankalp Devkar said:
I flashed it via twrp,
First, I downloaded twrp from here: https://forum.xda-developers.com/t/...i3-1-twrp-3-5-1_10-0-for-samsung-m51.4249719/
Then i flashed it via odin
After that i downloaded Dmverity force encrypt disabler, multidisabler 12, dyna patch,chondoe_flasher
Flashed dmverity+multidisabler+Dyna patch and moved all rom files in same folder as chondoe_flasher
Rename all files as follows :
A71port.img to system.img
A71vendor.img to vendor.img
A71product.img to product.img
A71odm.img to odm.img
Flash chondoe_flasher and you're ready to go !
Click to expand...
Click to collapse
Error: failed to mount '/odm' (no such file or directory)
Performing all steps still this issue.
Please help... If you ask I can explain whole process I performed.
Viraj Naik said:
Error: failed to mount '/odm' (no such file or directory)
Performing all steps still this issue.
Please help... If you ask I can explain whole process I performed.
Click to expand...
Click to collapse
ignore it, I get the same error most of the time
Just Installed... Getting Bixby not available on your device.. what are the steps for getting bixby running?
Camera is not opening too..
Clean flash
dgattupalli said:
Just Installed... Getting Bixby not available on your device.. what are the steps for getting bixby running?
Camera is not opening too..
Clean flash
Click to expand...
Click to collapse
Bixby is buggy on this rom, I once Uninstalled and reinstalled Bixby bur still showing that after opening app. But Bixby home just works fine for me ( Clean flash)
Wow, this looks promising. But I've got a few questions.
Firstly, I have hex installed in my phone. Will it still work?
Secondly, will Knox create any problems? I've heard that when Knox gets triggered, you cannot use apps like Google Pay. Is there any work around to make those apps work again? Also heard that Magisk have a few options for it, does it work?
Thirdly, will this project get updates?
And lastly, how's the battery and camera? Is battery life good? Will I finally be able to record videos in 60fps?
Would love if you can answer my dumb questions.
John Yankton said:
I've heard that when Knox gets triggered, you cannot use apps like Google Pay
Click to expand...
Click to collapse
Knox and Google have nothing to do with each other. Samsung Pay is what breaks with triggered Knox, but I don't know how the M51's Knox works.

Categories

Resources