Related
I don't know what problem is this. Here is the link https://youtu.be/gvcj1V8XQwo I posters it in YouTube because it is quite hard to explain. I think no one has occur this problem. Any ideas how to fix it?
One plus 3 china a3000
Flash official twrp from one plus website
Successfully unlock bootloader
Install official op3 oxygen os
Successfully flash twrp official by one plus website
try flashing official recovery and sideload the full latest OOS.
angdaminaman said:
try flashing official recovery and sideload the full latest OOS.
Click to expand...
Click to collapse
What is OOS btw. What is OTA?? How do I flash the OOS? I had install twrp official by one plus website sorry I still a newbie. Btw I had tried using adb side load it also stuck halfway.
Abraham tan said:
What is OOS btw. What is OTA?? How do I flash the OOS? I had install twrp official by one plus website sorry I still a newbie. Btw I had tried using adb side load it also stuck halfway.
Click to expand...
Click to collapse
oxygen os for OOS, then over the air update for ota.. twrp official by oneplus ?? oneplus would not provide twrp.. they will only provide their own stock recovery..
edit:
my bad. they supplied twrp on their website. lol.
reyscott said:
oxygen os for OOS, then over the air update for ota.. twrp official by oneplus ?? oneplus would not provide twrp.. they will only provide their own stock recovery..
edit:
my bad. they supplied twrp on their website. lol.
Click to expand...
Click to collapse
Idk what u mean. I still a newbie. Can I give me more detail on how? I had tried install oxygen os official by one plus it is still the same problem.
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Sent from my ONEPLUS A3000
fiepi said:
http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
Sent from my ONEPLUS A3000
Click to expand...
Click to collapse
So this assume that my one plus 3 hardware problem or hard brick ?
Abraham tan said:
So this assume that my one plus 3 hardware problem or hard brick ?
Click to expand...
Click to collapse
i just restored mine using twrp and it worked for me.. try to check with oneplus customer support
reflash the original oneplus recovery, not twrp, thru fastboot.
download the full oxygen os in your pc. the sideload it thru your pc via original oxygen recovery.
angdaminaman said:
reflash the original oneplus recovery, not twrp, thru fastboot.
download the full oxygen os in your pc. the sideload it thru your pc via original oxygen recovery.
Click to expand...
Click to collapse
what i did on mine was to flash official 3.2.6 and never thought that it would work. but it did.. and then after booting up, i flash the stock oneplus recovery on twrp then updated my phone with the 3.2.7 ota..
reyscott said:
what i did on mine was to flash official 3.2.6 and never thought that it would work. but it did.. and then after booting up, i flash the stock oneplus recovery on twrp then updated my phone with the 3.2.7 ota..
Click to expand...
Click to collapse
thats good sir.
i have china version op3 as well. what i did to flash OOS is just sideload thru stock recovery. i didnt even need to unlock bootloader. since they are both official OS.
so that might work for the original poster. just use stock recovery and adb sideload OOS
angdaminaman said:
thats good sir.
i have china version op3 as well. what i did to flash OOS is just sideload thru stock recovery. i didnt even need to unlock bootloader. since they are both official OS.
so that might work for the original poster. just use stock recovery and adb sideload OOS
Click to expand...
Click to collapse
Btw what is OOS how do I flash it?
Abraham tan said:
Btw what is OOS how do I flash it?
Click to expand...
Click to collapse
OOS is OxygenOS.......
Abraham tan said:
Btw what is OOS how do I flash it?
Click to expand...
Click to collapse
aassuming you know all the basics and you have computers around you, especially windows os.
1. download everything (latest full oxygen os zip found in downloads.oneplus.net, original oxygen recovery also found in that link)
2. boot to fastboot
3. flash original recovery (i believe you know how to flash, you have twrp in your oneplus 3, this should not be a problem to you)
4. reboot to recovery
5. choose adb sideload
6. adb sideload the latest oxygen os zip
you should really just follow step by step the instruction found in the downloads.oneplus.net, assuming you now have the original recovery, not the twrp.
tell me if you still can not follow. ill make a spoonfeed tutorial when i get home using pc. its really hard to write a step by step tutorial using phone.
@abraham I noticed you didn't wipe dalvik cache before installing the OOS. Try wiping dalvik cache, cache, data and system to see if that could solve the problem.
Sent from my ONEPLUS A3003 using Tapatalk
angdaminaman said:
aassuming you know all the basics and you have computers around you, especially windows os.
1. download everything (latest full oxygen os zip found in downloads.oneplus.net, original oxygen recovery also found in that link)
2. boot to fastboot
3. flash original recovery (i believe you know how to flash, you have twrp in your oneplus 3, this should not be a problem to you)
4. reboot to recovery
5. choose adb sideload
6. adb sideload the latest oxygen os zip
you should really just follow step by step the instruction found in the downloads.oneplus.net, assuming you now have the original recovery, not the twrp.
tell me if you still can not follow. ill make a spoonfeed tutorial when i get home using pc. its really hard to write a step by step tutorial using phone.
Click to expand...
Click to collapse
Tried every possible method. I use twrp official flash zip or adb side load also cannot. I tried using stock recovery also cannot. I tried using the hard brick way last night but after the flash, the phone is charging and I know it is OOS charging thing. Like you power off your phone and let it charge it wok come out a battery logo and charge your phone. I got that so I assume that I have OOS install. But when I power it on it also stuck at booting the phone. So tired right now being finding solution for about 2 weeks. Could it be the hardware problem that effect the phone?
Butit said:
@abraham I noticed you didn't wipe dalvik cache before installing the OOS. Try wiping dalvik cache, cache, data and system to see if that could solve the problem.
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Thanks for the advise. Tried but no luck. Still the same problem. What seems to be the problem? Hardware? Or could it be a fake op3 that I bought from china?
Abraham tan said:
Thanks for the advise. Tried but no luck. Still the same problem. What seems to be the problem? Hardware? Or could it be a fake op3 that I bought from china?
Click to expand...
Click to collapse
if you were able to flash op3 twrp, then its not fake. the twrp you downloaded is designed for op3, right? if you have successfully flashed it, then its an authentic op3.
just return/exchange it if possible.
i have changed my Hydrogen OS to Oxygen OS smoothly. I didnt even need to unlock bootloader nor change recoveries.
angdaminaman said:
if you were able to flash op3 twrp, then its not fake. the twrp you downloaded is designed for op3, right? if you have successfully flashed it, then its an authentic op3.
just return/exchange it if possible.
i have changed my Hydrogen OS to Oxygen OS smoothly. I didnt even need to unlock bootloader nor change recoveries.
Click to expand...
Click to collapse
Hmm what's seems to be the problem. I live in Malaysia and I bought the op3 from china so it is kinda hard to return. Maybe I bring to service centre for repair.
Abraham tan said:
What is OOS btw. What is OTA?? How do I flash the OOS? I had install twrp official by one plus website sorry I still a newbie. Btw I had tried using adb side load it also stuck halfway.
Click to expand...
Click to collapse
You have to wait when it stuck half way, it takes some time there and continue usually, this is what i seen?
Removed
Which TWRP did you try flashing? Official or modified one?
Try with modified 3.0.2-22, if you haven't yet.
Sent from my OnePlus 3 using Tapatalk
Thanks for the reply.
Flashed modified 3.0.2-22 before flashing new CE build.
Post corrupting recovery partition, tried flashing back the same recovery...resulting in blackscreen tho.
Explorer23 said:
Which TWRP did you try flashing? Official or modified one?
Try with modified 3.0.2-22, if you haven't yet.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
Did you try mega unbrick guide?
Sent from my ONEPLUS A3000 using Tapatalk
yes, tried with MSMDownloadTool from that post, since the device isn't in Qualcomm diagnostic mode, that didn't help much.
Explorer23 said:
Which TWRP did you try flashing? Official or modified one?
Try with modified 3.0.2-22, if you haven't yet.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
tdamocles said:
Did you try mega unbrick guide?
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
I'm facing almost same situation, haven't flashed wrong twrp, have tried 3.0.2.22 and screwed up...not able to flash any other twrp. Have side loaded OOS 3.5.5 and rebooted to get official recovery and succeeded as well but as soon as have flashed official twrp resulting black screen. Again flashed 3.0.2.22 through fastboot mode and working... In short, I can't use any recovery other then 3.0.2.22. Any guidance and help would be highly appreciated....
Sent from Tapatalk
I also use .22 recovery and no problem. The problem is not the recovery, its a noob problem.
indeed that seems to be the problem here.
Tried flashing modified recovery again (-22), successfully booted into recovery now.
What's causing this issue, any pointers guys ?
can't go back to official twrp for some reason.
deeplyyoung said:
I'm facing almost same situation, haven't flashed wrong twrp, have tried 3.0.2.22 and screwed up...not able to flash any other twrp. Have side loaded OOS 3.5.5 and rebooted to get official recovery and succeeded as well but as soon as have flashed official twrp resulting black screen. Again flashed 3.0.2.22 through fastboot mode and working... In short, I can't use any recovery other then 3.0.2.22. Any guidance and help would be highly appreciated....
Sent from Tapatalk
Click to expand...
Click to collapse
Well technically we should be able to get back to official recovery.
Care to explain the "noob" problem mate ?
Schrotty35 said:
I also use .22 recovery and no problem. The problem is not the recovery, its a noob problem.
Click to expand...
Click to collapse
Schrotty35 said:
I also use .22 recovery and no problem. The problem is not the recovery, its a noob problem.
Click to expand...
Click to collapse
Well accepted its noob problem, appreciating if you help us, instead of pointing noob @#$%.
Want to use multiROM but not able to flash any other recovery.
Any other way to hard reset the device which fixed recovery partitions (I'm sure we messed with partitions).
Edit: even I'm using 3.0.2.22 without any issues but if I want to use any other recovery(official twrp or multiROM twrp, not able to boot into it, truly noob thing as per your post)
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
deeplyyoung said:
I'm facing almost same situation, haven't flashed wrong twrp, have tried 3.0.2.22 and screwed up...not able to flash any other twrp. Have side loaded OOS 3.5.5 and rebooted to get official recovery and succeeded as well but as soon as have flashed official twrp resulting black screen. Again flashed 3.0.2.22 through fastboot mode and working... In short, I can't use any recovery other then 3.0.2.22. Any guidance and help would be highly appreciated....
Sent from Tapatalk
Click to expand...
Click to collapse
I'm trying to get stock recovery I have modified twrp but whenever I flash the cb full zip twrp doesn't get overwritten
To Reproduce the issue.
1. Flash modified TWRP (-22) version via fastboot
2. Flash CE ROM latest 3.5.5 from recovery
3. Reboot into system, successfully booted.
4. Tried flashing official TWRP, results in Blackscreen (in my case flashed incorrect TWRP, then flashed official one)
5. flashing back (-22) version of TWRP, recovery seems working...however if one wants to switch to official or MultiRom's TWRP, results in Blackscreen.
Hope this gives detailed understanding
Edit:
Gonna try the same with 3.2.7 OOS. Thanks Mate
Explorer23 said:
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
Explorer23 said:
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
thanks Buddy, appreciated your help, gonna try this ASAP & will revert with results.
not able to get full zip of 3.2.7, trying with 3.2.6
Yeah, flashing full stock oos might do the trick, there's something related to firmware, it's a long story to understand and I'm not fully getting it, anyway, flash the full stock, boot it up, your device may get encrypted again and then flash the official twrp via fastboot, don't use flashify
I'll try to keep an eye out here rather than on the multi-boot thread
Sent from my Darkside of Oneplus 3
power off phone, keep pressed vol-up+vol-down and connect usb cable, phone will enter qualcomm download mode, then flash with MSM Download Tool.
Explorer23 said:
Official TWRP is not compatible with CE ROMs. Try first flashing official OOS (3.2.7 or older) with -22 and then flashing official TWRP.
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
xanthrax said:
Yeah, flashing full stock oos might do the trick, there's something related to firmware, it's a long story to understand and I'm not fully getting it, anyway, flash the full stock, boot it up, your device may get encrypted again and then flash the official twrp via fastboot, don't use flashify
I'll try to keep an eye out here rather than on the multi-boot thread
Sent from my Darkside of Oneplus 3
Click to expand...
Click to collapse
Yesssss!! Trick worked, have flashed FULL zip OnePlus3Oxygen_16_OTA_015_all_1609141252_c38077177cfc4e74 over OnePlus3Oxygen_16_OTA_007_all_1610310039_bc5bc09fd9af4ceb with stock recovery, device encrypted again but no issues, then fastboot official TWRP worked & then fastboot MRTWRP worked....
now my Question:- pls help, enable us to get some knowledge
I want to use MultiROM, so decryption procedure will do.
1} if i again flash OnePlus 3 OxygenOS 3.5.5 Community Build as primary using MultiROM twrp, is it gonna work?
2} I want to use DU(MM), PAC-MAN(MM), exodus, MIUI, aicp (7.1) or HydrogenOS H2OS whats the best possibilities & way.
3} which one can be use as primary
4} can i flash FreedomOS CE 1.10 [OOS 3.5.5 CB] using multiROM twrp as primary?
5} can I swap FreedomOS CE 1.10 [OOS 3.5.5 CB] as secondary & flash HydrogenOS H2OS as primary?
Hi all,
I have succesfully unlocked my NEM-AL10 (3GB China version), and using adb/fastboot I flashed TWRP on it from the TRWP.me site, Honor 5c.
now my problem is I cannot get into TWRP, tried the button combination Vol+ / Power with and without the cable plugged in.
when plugged in: goes into Huwei erecovery --> no use
when not plugged in: goes only to "your devices has been unlocked and can't be trusted, your device is booting now" ad then is stuck there...
how to get into TWRP? I want to flash the GAPPS, and need a custom recovery for that....
please help....
you need to find the correct version of twrp for your model its somewhere on xda cant remember where..
Try to flash this TWRP. See if it works. Use adb commands. Here is the link : http://www.meticulus.co.vu/p/hi6250-custom-rom-installation.html?m=1
actually,
found out that needed the Chinese TWRP, that one does flash and run(got it from russian site)
thanks for the quick replies people.
now ran into the error 70 when trying to flash mini apps, flashed the pico, but then launcher didn't work anymore... any solutions for that?
gordonnorth said:
actually,
found out that needed the Chinese TWRP, that one does flash and run(got it from russian site)
thanks for the quick replies people.
now ran into the error 70 when trying to flash mini apps, flashed the pico, but then launcher didn't work anymore... any solutions for that?
Click to expand...
Click to collapse
Which rom r u on? Meticulus CM 13?
stock rom at the moment... NEM-AL10 Chinese Stock ROM
gordonnorth said:
stock rom at the moment... NEM-AL10 Chinese Stock ROM
Click to expand...
Click to collapse
Actually TWRP does give a warning while flashing gapps when ur Stock rom already presents all the necessary google apps u need.
Chinese stock rom does not have any google apps... so that cannot be the issue
gordonnorth said:
Hi all,
I have succesfully unlocked my NEM-AL10 (3GB China version), and using adb/fastboot I flashed TWRP on it from the TRWP.me site, Honor 5c.
now my problem is I cannot get into TWRP, tried the button combination Vol+ / Power with and without the cable plugged in.
when plugged in: goes into Huwei erecovery --> no use
when not plugged in: goes only to "your devices has been unlocked and can't be trusted, your device is booting now" ad then is stuck there...
how to get into TWRP? I want to flash the GAPPS, and need a custom recovery for that....
please help....
Click to expand...
Click to collapse
For me it worked to just hold the Volume Up button when the phone was rebooted from command line. Do not keep the Power button pressed. This caused TWRP to load and overwrite stock ROM properly, otherwise it just gets overwritten in boot. I have the Honor 7 Lite version sold in Europe though, but I think it works the same.
Hi everyone. Please help, I am stuck in Fastboot and it wont boot into TWRP nor the System. This happened after I restored a backup of the System partition using TWRP.
Anyways, Im trying to flash the official stock ROM and I always get the "Mismatching device and image" error. I downloaded the 3.8.0 Fastboot btw.
Please help, I'm very desprate
jceey15 said:
Hi everyone. Please help, I am stuck in Fastboot and it wont boot into TWRP nor the System. This happened after I restored a backup of the System partition using TWRP.
Anyways, Im trying to flash the official stock ROM and I always get the "Mismatching device and image" error. I downloaded the 3.8.0 Fastboot btw.
Please help, I'm very desprate
Click to expand...
Click to collapse
try flashing stock rom via miflash
ddrface said:
try flashing stock rom via miflash
Click to expand...
Click to collapse
I tried this but I get the "Mismatch between image and device" error everytime I flash the stock ROM
if you device is chinese you can flash chinese rom via miflash
jceey15 said:
I tried this but I get the "Mismatch between image and device" error everytime I flash the stock ROM
Click to expand...
Click to collapse
Maybe try to flash an newer version (always via fastboot). Be sure about the ROM you're downloading!
thelegoboy said:
Maybe try to flash an newer version (always via fastboot). Be sure about the ROM you're downloading!
Click to expand...
Click to collapse
I already tried to flash the latest version 10.3.16, and still nothing
jceey15 said:
I already tried to flash the latest version 10.3.16, and still nothing
Click to expand...
Click to collapse
Maybe this could help you. BUT IS VERY RISKY
https://forum.xda-developers.com/redmi-note-4/help/getting-mismatched-image-error-fastboot-t3638653
It's risky because if the ROM is not right it will mess up your phone completly.
Did you download it from the XDA thread, right?
jceey15 said:
I tried this but I get the "Mismatch between image and device" error everytime I flash the stock ROM
Click to expand...
Click to collapse
Try a different USB port or cable... Somehow solved it for me. Keep flashing the latest fastboot version and remain patient
Sent from my Redmi K20 Pro using Tapatalk
jceey15 said:
I already tried to flash the latest version 10.3.16, and still nothing
Click to expand...
Click to collapse
I faced something like this...stock rom was not flashing...some error shows up... someone told me to change the fastboot rom file directory...i copied the rom to my desktop...thn it worked...i don't know if it would help...but why not give it a try
Thanks to everybody who gave their advice here. For me, it was a PC problem (or adb driver problem). I factory reset my PC cause I have cloud backup, and started the process clean. From there, I only downloaded Minimal ADB and Fastboot. Then I tried MiFlash, and the flashing process went through without any errors this time.
Hello,
I have the same problem, screen stuck on Fastboot.
It happened after having cleared up too much with TWRP.
I can't figure out how to flash back the original rom.
I see lot of tutorials and roms but nothing really clear.
I downloaded Mi Flash Pro.
Questions:
- Where can I find the last official rom for Xiaomi Mi 9T Pro / Redmi K20 Pro? (for European Union)
- How can I use Mi Flash Pro to re-install it back?
Thanks a lot for your help
thibaut0 said:
Hello,
I have the same problem, screen stuck on Fastboot.
It happened after having cleared up too much with TWRP.
I can't figure out how to flash back the original rom.
I see lot of tutorials and roms but nothing really clear.
I downloaded Mi Flash Pro.
Questions:
- Where can I find the last official rom for Xiaomi Mi 9T Pro / Redmi K20 Pro? (for European Union)
- How can I use Mi Flash Pro to re-install it back?
Thanks a lot for your help
Click to expand...
Click to collapse
Hello,
I found the solution with the right explanations and source where to get the rom and the software.
Unfortunately, as a new member here, I cannot share the link...
Will do it whenever I can.
Download ROM: http://c.mi.com//miuidownload/detail?device=1700361
Alright lets start... I bought Mi 9 about 2 months. I just like to work with phones and mess up with Roms, recoverys, etc. I started it about 4-5 years ago with Samsung Galaxy Trend Plus. When i lost that phone i bought HTC M8 and also do the same (mess up with software). With Mi 9 i couldnt wait for Miui11 and tried to install it via Twrp. Unlocked bootloader installed Twrp via Fastboot, and every time when i restarted phone Miui stock recovery would overwrite Twrp. I searched everywhere and found some "solution". It was when you install Twrp via fastboot you need to write Fastboot boot Twrp.img, something like that im not really sure. Well that worked, kindof. Twrp would always appear but it cant boot into Android. And like always i tried to to solve it myself but i cant for two days of working without stopping i cant solve this. I tried to install different Rom (Miui 11 all versions) and it would install but wont boot. I tried Stock Miui Rom, i tried Factory img almost everything. Tried with adb, Miflash tool, All in one tool for Mi 9. I really love this phone i worked every day on summer for this phone. Thanks. If someone read this and want to help for more information just ask.
MadTractorist said:
Alright lets start... I bought Mi 9 about 2 months. I just like to work with phones and mess up with Roms, recoverys, etc. I started it about 4-5 years ago with Samsung Galaxy Trend Plus. When i lost that phone i bought HTC M8 and also do the same (mess up with software). With Mi 9 i couldnt wait for Miui11 and tried to install it via Twrp. Unlocked bootloader installed Twrp via Fastboot, and every time when i restarted phone Miui stock recovery would overwrite Twrp. I searched everywhere and found some "solution". It was when you install Twrp via fastboot you need to write Fastboot boot Twrp.img, something like that im not really sure. Well that worked, kindof. Twrp would always appear but it cant boot into Android. And like always i tried to to solve it myself but i cant for two days of working without stopping i cant solve this. I tried to install different Rom (Miui 11 all versions) and it would install but wont boot. I tried Stock Miui Rom, i tried Factory img almost everything. Tried with adb, Miflash tool, All in one tool for Mi 9. I really love this phone i worked every day on summer for this phone. Thanks. If someone read this and want to help for more information just ask.
Click to expand...
Click to collapse
First of all
It's wrong froum
Format data always needed after to flashed new rom
And you did try to flash vbmeta.img ?
MadTractorist said:
Alright lets start... I bought Mi 9 about 2 months. I just like to work with phones and mess up with Roms, recoverys, etc. I started it about 4-5 years ago with Samsung Galaxy Trend Plus. When i lost that phone i bought HTC M8 and also do the same (mess up with software). With Mi 9 i couldnt wait for Miui11 and tried to install it via Twrp. Unlocked bootloader installed Twrp via Fastboot, and every time when i restarted phone Miui stock recovery would overwrite Twrp. I searched everywhere and found some "solution". It was when you install Twrp via fastboot you need to write Fastboot boot Twrp.img, something like that im not really sure. Well that worked, kindof. Twrp would always appear but it cant boot into Android. And like always i tried to to solve it myself but i cant for two days of working without stopping i cant solve this. I tried to install different Rom (Miui 11 all versions) and it would install but wont boot. I tried Stock Miui Rom, i tried Factory img almost everything. Tried with adb, Miflash tool, All in one tool for Mi 9. I really love this phone i worked every day on summer for this phone. Thanks. If someone read this and want to help for more information just ask.
Click to expand...
Click to collapse
You need Miflash pro. Search for it. Sounds like you have some kind of recovery bootloop. If you can get your Mi9 to the fastboot (bootloader) screen then you can fix your cell an get it to boot . Trust me on this. I must of made flashing errors with my Mi9 maybe 20 times an got stuck in a fastboot loop.
Heres a link https://androidmtk.com/use-mi-flash-pro-download-xiaomi-firmware
Follow the guides an you should have a working Mi9 in under 20 minutes.
Sometimes there can be trouble getting the latest version of Miflash pro an it requires a bit of tinkering to flash with it.
Not sure that this would help but here is what I did to install Xiaomi.EU ROM in my Mi 9. I followed the guide from this forum here.
Prerequisite:
Download TWRP 3.3.1-42 for Cepheus from Mauronofrio here
Download Xiaomi.EU ROM here
Rename both files to twrp.img & rom.zip respectively (for easy typing later)
Steps:
Power off phone
Boot phone to fastboot - Vol Down + Power
type "fastboot flash recovery twrp.img" without the double quotes
Power off phone
Boot phone to recovery - Vol Up + Power
Type "adb push rom.zip /tmp/" without the double quotes
In TWRP, go to Wipe-Format Data-type yes in TWRP
Then perform a Factory Reset in TWRP
Then flash ROM located in tmp
And finally reboot to system
I hope this helps.
fereidooni said:
First of all
It's wrong froum
Format data always needed after to flashed new rom
And you did try to flash vbmeta.img ?
Click to expand...
Click to collapse
Maybe this guys new man?