Database Develop

Xiaomi Mi 5x Bricked, Need help.

Hello, today I tried to install a custom rom on my xiaomi mi5x, so I unloocked the bootloader and installed twrp, than I installed the android one rom .The problem was that I had to verify my gmail because it got locked, so I looked up a way to bypass that lock. I followed a youtube video on how to bypass that lock on android one, and now my phone has the following issue:
After booting I only see the MI logo for about a second, than it goes into black screen, same thing happens when I try to boot to recovery.
The only thing that works is fastboot.
Please help me!

Go into fastboot and write following command:
fastboot boot twrp.img
Click to expand...
Click to collapse
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.

SoNhater said:
Go into fastboot and write following command:
You will enter a recovery mode. There you could try a factory reset or flash a new ROM.\
If this wont` help, you could flash a new ROM via fastboot also.
Click to expand...
Click to collapse
hi sir, i am facing also the same problem. and in my case every time i tried that code here is the output
FAILED (remote: unlock device to use this command)
i know that i already unlocked this before.

I would recommend that you flash the official firmware (fastboot version). Please follow the instructions here http://en.miui.com/a-234.html.

I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.

eman78 said:
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Any body can help me pls. My mi5x device is now on black secreen. Not openning..
it became after load orijinal rom onto oxygen boot.
Any body can help me pls
I need "emmc_appsboot.mbn" file from a working MD E2 devices.
Click to expand...
Click to collapse
Have you find a solution sir ?

I already have tried to flash in EDL mode but when the flashing is done the phone did not reboot, plugged in the charger, and connected to the computer only received
qualcomm Hs-usb Diagnostics 900e​

Bricked! Help me please.

Hello everyone
My brother's Mi A2 is bricked for no reason. I tried to solve this problem and searched a lot but didn't manage to solve it. I hope you can help.
* before telling my story here is some stuff to know:
- The phone was running official firmware and bootloader is locked, I've never played with it's software before.
- Oem unlocking option isn't turned on.
- The phone doesn't go to recovery mode, only fastboot or regular boot.
- I used EDL mode in every flashing attempt.
- I don't remember that there is a mi account assigned to the device.
* Here is what happened:
- The phone suddenly shut down during a call and never passed the AndroidOne logo after that.
- Tried EDL mode and miflash to flash the latest firmware. Flashing completed successfully but the phone still stuck on the androidone logo.
- Did it again and again but the result was constant.
- Tried flashing older firmware "Oreo 8.1" but during flashing system.img the process stopped with an error. (I don't remeber what the error was).
- I tried to turn on the phone but after showing AndroidOne logo This message appeared:
"Your device is corrupt. It can't be trusted and will not boot.
Visit this link on another device: g.co/ABH"
and the device shuts down in a minute.
Hint: Sometimes when I try to turn one the phone the above message appears after androidone logo and sometimes the device just keep showing the logo.
- Trying to flash any firmware version by using Miflash Beta gives an error message "Can not found programmer file" immediately. when I try again it gives: "can't read from port COM4", Changing the port gives the same error with different port number.
-When I use any other version of "Portable miflash", The flashing process starts normally but fails when trying to flash "dsp.img", giving an error of "writing time out".
- I tried reinstalling all drivers needed with no change at all.
I hope that you guys can help me solving this problem.
Thank you so much!

Try EDL mode opening your phone...

Badotti said:
Try EDL mode opening your phone...
Click to expand...
Click to collapse
I did.
Bootloader is locked, so EDL mode was the only way. But now I get error writing timed out while flashing any firmware version.

Ahmed A. Mohsen said:
I did.
Bootloader is locked, so EDL mode was the only way. But now I get error writing timed out while flashing any firmware version.
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=wav1xNdJzII
Youtube you find several tutorials, work and open the phone ...

Badotti said:
https://www.youtube.com/watch?v=wav1xNdJzII
Youtube you find several tutorials, work and open the phone ...
Click to expand...
Click to collapse
I opened the phone and used edl mode already but the problem is still present.

up

Have you tried to use qfil? See in the 3d dedicated to conversion A2 <> 6x

HTCDevil said:
Have you tried to use qfil? See in the 3d dedicated to conversion A2 <> 6x
Click to expand...
Click to collapse
This needs bootloader to be unlocked and my device's bootloader is locked.
Any solutions?

Go to service center this is last option you save RIP mi a2 ?

As I can see from picture you have posted, your bootloader is unlocked.

SkullSatan88 said:
Go to service center this is last option you save RIP mi a2
Click to expand...
Click to collapse
They refused to receive my device because I bought it from another country.

bomil said:
As I can see from picture you have posted, your bootloader is unlocked.
Click to expand...
Click to collapse
when I checked bootloader status in the beginning it was locked.
Are you sure that it's now unlocked?

Text me on telegram. @dejavutr

Bricked CC9 from anti-rollback. Help with EDL flashing

I accidentally flashed a MiUI 10 ROM with miflash onto my CC9 which has bricked my phone as it was previously on MiUI 11. My bootloader is now locked because I accidentally checked that option in miflash so I can't just fastboot flash another working ROM. I tried putting the phone into EDL mode using the test pin method, however since I did that once, it will no longer go into EDL mode again. Is this normal?
If anyone knows or can point me in the direction of someone who can unbrick my phone it would be much appreciated.
Thanks

This is why you have to be extra careful while flashing something.. hope you find a solution

kalebwinefield said:
I accidentally flashed a MiUI 10 ROM with miflash onto my CC9 which has bricked my phone as it was previously on MiUI 11. My bootloader is now locked because I accidentally checked that option in miflash so I can't just fastboot flash another working ROM. I tried putting the phone into EDL mode using the test pin method, however since I did that once, it will no longer go into EDL mode again. Is this normal?
If anyone knows or can point me in the direction of someone who can unbrick my phone it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Can you access fastboot mode? If so, you can try unlocking the bootloader again and installing the rom you want. If you haven't removed the mi account it will unlock and you don't even have to wait the required time again.

Unfortunately since I bought the phone off AliExpress, the seller had already unlocked it so their account is bound to the phone rather than mine. I have managed to get the phone to boot into EDL mode by the test point method but I don't have an edl authorised account to flash a working ROM. If anyone knows someone who could help me out with this I'm more than happy to pay them for their time ?

kalebwinefield said:
Unfortunately since I bought the phone off AliExpress, the seller had already unlocked it so their account is bound to the phone rather than mine. I have managed to get the phone to boot into EDL mode by the test point method but I don't have an edl authorised account to flash a working ROM. If anyone knows someone who could help me out with this I'm more than happy to pay them for their time ?
Click to expand...
Click to collapse
Download the latest fastboot firmware (MIUI 11) for your mi cc9 (not mi 9 lite). Don't grab the recovery.zip firmware, it's useless and will give you errors.
When you finish your download, unpack your .tar firmware twice and flash it with MiFlashTool while you are on fastboot mode. (Power/Vol-).
Next time, ask before flashing not after !

Hello , how is it going?. I also have problem with my cc9 and tried to flash latest miui 10 v11.3.4.0 and now it's softbricked , I'm having problem with Mi Flash since it's showing lock state error. any fix for it?

stinkyllamaXDA1 said:
Hello , how is it going?. I also have problem with my cc9 and tried to flash latest miui 10 v11.3.4.0 and now it's softbricked , I'm having problem with Mi Flash since it's showing lock state error. any fix for it?
Click to expand...
Click to collapse
What kind of firmware are you trying to flash trough MiFlash ? recovery.zip or fastboot ? Can you take screenshots so people can know what is your issue ? Without screenshot no one will help you here !
Cheers

I also same situation, does anyone know a good idea?
I also same situation, does anyone know a good idea?
I installed Global ROM in CC9(Chinese edition) device and the device BootLoader is locked.
When I used fastboot and miflashtool, I got a message "Unauthorized for this operation"
I tried to unlock it and I also get a message "please add your account in miui settings > developer options > mi unlock status"
But i can't get out of recovery mode so I can't change the settings.
I tried to unlock but failed and also attempts to flash in EDL mode failed.
Sorry for bad english

irum94 said:
I also same situation, does anyone know a good idea?
I installed Global ROM in CC9(Chinese edition) device and the device BootLoader is locked.
When I used fastboot and miflashtool, I got a message "Unauthorized for this operation"
I tried to unlock it and I also get a message "please add your account in miui settings > developer options > mi unlock status"
But i can't get out of recovery mode so I can't change the settings.
I tried to unlock but failed and also attempts to flash in EDL mode failed.
Sorry for bad english
Click to expand...
Click to collapse
Few days ago my phone was totally dead, even charging not working. You need to flash firmware with edl authorized account in edl 9008 mode, firehose programator require verification before write ?

Stefke93 said:
Few days ago my phone was totally dead, even charging not working. You need to flash firmware with edl authorized account in edl 9008 mode, firehose programator require verification before write
Click to expand...
Click to collapse
I've already tried to flash from edl mode. but I don't have an account with authority.
Is there any way to bypass verification ?

irum94 said:
I've already tried to flash from edl mode. but I don't have an account with authority.
Is there any way to bypass verification ?
Click to expand...
Click to collapse
No until someone patch firehose for sdm710 ?

Mi 9 lite
I have a xiaomi mi 9 lite and it is in bootloop I try to turn it on and the MI logo appears for a second and it goes off I can't go into fastboot or recovery I already opened it to do test point and flash but it asks me for an authorized account If someone here has an authorized account that can lend me I will pay for the rental of the authorized account please help with that.

This guy helped me. He uses ultraviewer.net for remote connection. 1722 rubles for flashing.
MOD EDIT: Phone Number Removed
Le: how did you bricked it? I restored an older backup of android 9 over Android 10 from twrp. But from what I understand cc9 doesn't have rollback protection.
Le2: you can also try those fishy 710 firehose no Auth loaders you can find from various sources. Didn't worked for me but you can try.

If you flash Revolution OS or flash Android 9 over Android 10 rom you have good chance to hard brick device so you need to flash first fastboot rom if you want to go from 10 to 9

Thanks
friend @editheraven thank you very much for the contact, I spoke and yesterday I could flash my MI 9 lite I really appreciate it, thank you bro.

loc182 said:
I have a xiaomi mi 9 lite and it is in bootloop I try to turn it on and the MI logo appears for a second and it goes off I can't go into fastboot or recovery I already opened it to do test point and flash but it asks me for an authorized account If someone here has an authorized account that can lend me I will pay for the rental of the authorized account please help with that.
Click to expand...
Click to collapse
Me too.my 9 lite brick Mi logo then off.pls suggest for me.Thank

chainorth said:
Me too.my 9 lite brick Mi logo then off.pls suggest for me.Thank
Click to expand...
Click to collapse
Download the fastboot firmware version and execute flash all. (not flash and lock).
I assume you have fastboot access.

editheraven said:
Download the fastboot firmware version and execute flash all. (not flash and lock).
I assume you have fastboot access.
Click to expand...
Click to collapse
it can't boot to fastboot or recovery mode.

chainorth said:
it can't boot to fastboot or recovery mode.
Click to expand...
Click to collapse
And no recovery? Only the splash screen?

editheraven said:
And no recovery? Only the splash screen?
Click to expand...
Click to collapse
yes .Mi logo 2 sec then screen off

Question The current image (boot/recovery) have been destroyed

Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!

Update: If someone would be able to extract a scatter file from their own OnePlus Ace too, I think that may help me

Sorry that you've ran into this, but thanks for confirming bootloader can be unlocked, and root is possible.
Getting the 10R over the Realme GT 2 (sad situation of bootloader unlock not possible). Hope you get an extract soon

Made some progress!
Got my hands on the Ace's firmware files, which included the scatter file. Redownloaded the newest 6.2 version of SP Flash Tool and loaded the scatter and auth files successfully. Clicked download, connected USB to phone while holding Vol + and Vol - and finally! Sp Flash Tool connected to the phone! However, now I've run into another problem: SP Flash Tool will show a red progress bar at the bottom saying 'Download DA', it will reach 100% quickly then throw me a very vague error simply saying 'error_msg'. And that's it. Tried unchecking different boxes, reinstalled drivers but it will always throw back this error.
Any ideas to figure out what the error is and fix it would be amazing

hello, im here to show support. My ace also bricked because i want to change from color os to oxygen. I used fastboot enhanced, might have missed a step and bricked. Mine also import, but the shop i bought offers 1 year warranty. Shop says have to wait for msm download tools to reflash or i have to pay $60 to send back to China because my own fault. Man, it is going to be a long wait for msm tools. haha

KeepingKeyes said:
saying 'error_msg'.
Click to expand...
Click to collapse
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware

DimRim said:
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware
Click to expand...
Click to collapse
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware

KeepingKeyes said:
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware
Click to expand...
Click to collapse
maybe this is because of the new chip and there is no support for bypassing it.I thought the method would work.also a tip-edit the scatter file, namely partition_name: super or system,changing the value is_download: false to is_download: true.hopefully help
And thank you for sharing the files

I too am stuck with Brick.
Is there a Bypass for the Demesity 8100 being developed?
This device is mostly Oppo, but there is no Oppo flash Tool?
There is very little information available.

KeepingKeyes said:
Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!
Click to expand...
Click to collapse
Still stuck or were you able to find any solution?

yashaswee1708 said:
Still stuck or were you able to find any solution?
Click to expand...
Click to collapse
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials

KeepingKeyes said:
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials
Click to expand...
Click to collapse
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.

yashaswee1708 said:
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.
Click to expand...
Click to collapse
I seem to have made fastboot inaccessible on my device, so I've been unable to use Fastboot enhance or utilise any ways to flash using fastboot

Damn!! I hope you find some way to fix your device. Good luck.

关于一加ACE如何优雅的刷入氧OS12.1这件事 来自 天伞桜 - 酷安

I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate

GTAstar said:
I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate
Click to expand...
Click to collapse
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.

hamsteer said:
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.
Click to expand...
Click to collapse
Are you still able to boot to Fastboot?

yashaswee1708 said:
Are you still able to boot to Fastboot?
Click to expand...
Click to collapse
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.

hamsteer said:
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.
Click to expand...
Click to collapse
So you are not able to boot right?
If not, you can try flashing the partitions manually from fastboot. (If you are willing to try I can provide the steps. This works for other OnePlus devices.)

Question Need Expert who can help in unbrick the realme x7 max. As hard bricking is getting common with new ROMs

Recently hard bricked my x7 max and while using MTK/SP tools gettings errors so need someone to help. I have seen so many people with same issues but no details troubleshooting guide here and also on YT.
Steps i took
Unlock bootloader(with stock rom and RUI4, Android 13, latest update)
Installed TWRP(found one twrp that actually worked but i was not able to backup the rom, showing errors while taking backup, error 255)
I thought i can revert on stock using SP tools so moved ahead
Once in TWRP, i installed Project elixir ROM and rebooted to bootloader, phone got dead.
I tried VCOM,linusb,SP flash tool and MTK Authbypass (brom waiting , maybe some issue in detect)
Today tried again(Somehow Brom was ok, but didnt get Authbypass message)
Tried multiple times but now it show error (image attached)
Need further assistance.
Didnt know how bad all these custom rom installing has become. In my days it was cool and fun without getting any errors( i was taking about 2015/2017....)

Kind of same thing happened to me 2 days ago. Trying to root the device and everything was fine until I restarted the phone. After that it just got hard bricked total black screen no realme logo, fastboot or recovery. Had to go into EDL mode and flash the offical rom. In my case there was no error in the mtk bypass tool and everything flashed without any errors. This time the phone booted normally and straight went to realme recovery mode and from there I just wiped the userdata and this time it got stuck in orange state(no realme animation logo). Although this time I could access the fastboot, so tried to install twrp but after flashing, nothing happened same stuck in orange state warning. After this again I tried to flash using mtk tool and after doing that everything remained same but I couldn't access fastboot anymore. The funny story is now I cannot even flash using mtk tool anymore. So, everything is ****ed, I don't think customer service can fix this, would be better to buy a new phone.
My experience with realme phone specially with mtk processor has been extremely bad , I faced errors after errors. Earlier I had redmi note 7 pro and it was excellent in terms of flashing roms and all. So many times I had bricked the device but could fix it no issues.
Anyway as I didn't faced this error I don't know how to fix this. I also used this exact same version also. Try using https://saransaro.com/SP_Flash_Tool_v6.2216_Win.zip . And see if this works.
Also, don't flash the scatter file of firmware after a.22 as it doesn't work for some reason . I used the a.22 one it worked fine.
Please let me know if you were able to fix it or not.