Does anyone else have the issue where the new lock screen takes 2 - 3 seconds before its responsive when you wake the phone up.
The start bar flashes, and then "start" shows, kind of like when you switch apps on the phone.
Yeah I get it too, its very annoying.
This an issue that seems to be exclusive to Raphael version of 6.5. Why i can only guess. But its been there since the start .
Interesting, if you enable the password after you slide, it no longer does it.
Anyone else want to confirm this?
xternal said:
Interesting, if you enable the password after you slide, it no longer does it.
Anyone else want to confirm this?
Click to expand...
Click to collapse
Justed tested it here works like you said. With a password set the lock screen is immediately responsive.
Hi community,
this is my first thread and i hope my english is good enough to explain my problem.
I want to use my Diamond as a Navigation System for my bicycle. Problem is that the phone is lying in a case on my tank and the drive vibration is touching the display.
Im looking for a tool which locks the display without switching it off. It shoukld be only activate in TomTom Menu.
Hope u understand.
Hi
Touchlockpro can do that
Its got lots of options but you could set it so it unlocks only when the stylus is out or you swipe the capacative pad with your finger
it does not use the windows lock it just locks the keys and screen press's
C.
So, I downloaded and launched it perfectly... everything so far i tried is working fine except the lock screen... Some times when i press the Cancel key the button lights lid up but there is nothing on the screen and sometimes it appear the lock screen but nothing happen....
Do someone have any solution to this...
Thank you.
I have the same problem. I have been reading that possibly going back to an older kernel / roofs fixes this problem but have not seen and confirmed reports.
Can anyone confirm this and what version?
Thanks
Same problem at me. Both builds are running very fine for some tine but after that are running slow.I don't know why. Maybe is somehow related with the lockscreen problem?
I have this problem as well i get lucky if i manage to move passt the lock screen and the OS runs really slow it takes like 20 seconds just to open the app screen and the app screen laggs like no to morrow how come so menny ppls can get it to run just fine but i cant it makes me sad face
+1 one for me... I have got a TOPA100, it's almost impossible to wake up the device, sometimes the lockscreen is visible, but it's impossible to move the unlock slider. Usually I need about 10 times and something around 5 Minutes to wake up the device.
Same problem here, would be great if this can be fixed...
RaZz0r12 said:
I have this problem as well i get lucky if i manage to move passt the lock screen and the OS runs really slow it takes like 20 seconds just to open the app screen and the app screen laggs like no to morrow how come so menny ppls can get it to run just fine but i cant it makes me sad face
Click to expand...
Click to collapse
For me it's the same and the battery runs only for one hour, I think a (system?)process is running with 100% CPU time. I am new to android, so I don't know where to look.
Same here on an AT&T Pure. Sure would love to get this fixed however I'm reasonably noob to the Android world (not completely novice to linux in general, and I have successfully flashed my AT&T TyTN II thanks to this site.) Fixing this would be a huge help!
Thanks
More specifically on my device I encounter. The following:
- Turn screen off via end button.
- Turn on screen via call button.
HW button lights come on for a few seconds then cut themselves off.
Screen does not turn on at this point.
- Turn on screen via call button again
- Screen comes on with HW button lights
about half the time screen is unresponsive and will not all me to unlock with swipe of finger
Other times will accept input and unlock to the home screen
When unresponsive repeating entire process above will likely allow me to unlock successfully.
Thanks!
Sent from my AT&T Pure using XDA App
same
my screen never wakes up
end up using soft reset to windows mobile
(it could be something to do with startup??)
I am using a Samsung TabPro S and I cannot navigate within RemixOS because the mapping of my touchscreen input to the curser within Remix is totally wrong. The mouse pointer is always some few cm away from the point where I touch the screen.
Impossible to correctly navigate.
I could use the trackpad though, but I don't want to.
I'm having the same problem...
I'm on a surface pro 4 and if I try to change orientation the screen gets confused.
Same problem on a Windows 10 Asus N550LF Touchscreen Notebook, i.e. mouse cursor basically stays where it was when I touch the screen, and just clicks. I can only use the trackpad, but then, what's the point of having the touchscreen to run android apps?
Also, when I tap and hold, mouse cursor goes into select mode or drag and drop, but with no accuracy on mapping position.
Also, trackpad scrolling (with two fingers) is jumpy, inaccurate.
jide is jeremy, ben and david: "and we're here to take it to the next level"
boys,
just try to focus on the basics first, get it done, then talk about the "next level"
same here on surface pro 4. I tried everything without success.
I bought a USB graphics tablet (Huion HS64) that's compatible with Android 6 and above. Problem is that when I connect it, there's no pointer on the phone indicating where it is I'm about to tap. Touch works perfectly fine, but the "invisible mouse" problem is annoying.
Is there any way I can display the same pointer that comes up when I connect a USB mouse to the S10? Or perhaps a similar icon or dot via overlay? I'd be fine with it always being on if that's easier than having the phone recognize the tablet as a mouse.
My device isn't rooted, but I'm not opposed to it if it solves the problem. Thanks in advance!
Esathn said:
I bought a USB graphics tablet (Huion HS64) that's compatible with Android 6 and above. Problem is that when I connect it, there's no pointer indicating where it is I'm about to tap. Touch works perfectly fine, but the "invisible mouse" problem is annoying.
Is there any way I can display the same pointer that comes up when I connect a USB mouse? Or perhaps a similar icon or dot via overlay? I'd be fine with it always being on if that's easier than having the phone recognize the tablet as a mouse.
My device isn't rooted, but I'm not opposed to it if it solves the problem. Thanks in advance!
Click to expand...
Click to collapse
Wrong place to ask. This forum is for questions and answers for the Samsung Galaxy S10.
Tel864 said:
Wrong place to ask. This forum is for questions and answers for the Samsung Galaxy S10.
Click to expand...
Click to collapse
I think there's a misunderstanding. It's the S10 that I want the cursor on, the tablet itself doesn't have a display. I'll edit the title and desc to be more clear.
Edit - Welp, I guess I'll just edit the description
Invisible Cursor
Hi!
The same thing happens with the Samsung S7 Edge, S8 and S10+, but with the Note 9 the cursor is visible.
I tried other brands and models and the cursor is visible. (Ex. Huawei Y6 )
I hope we find a solution.
kazio72 said:
Hi!
The same thing happens with the Samsung S7 Edge, S8 and S10+, but with the Note 9 the cursor is visible.
I tried other brands and models and the cursor is visible. (Ex. Huawei Y6 )
I hope we find a solution.
Click to expand...
Click to collapse
Yep. I contacted Samsung support but got the "well, we don't support graphics tablets" speech, so brick wall there. Emailed Huion and they asked me to check my OTG and pointer settings and to contact Samsung support. I just replied that I did those things and that others were having the same problem so we'll see if we get any progress on that. In the meantime we'll just have to wait until someone decides to code something up for us muggles.
Speaking of code, and I'm no expert so grain of salt and all that, I've got a few theroies:
Option 1: Force cursor visibility always
The cursor DOES pop up when a mouse is plugged in, therefore by changing some variables, we should be able to force the cursor to always be on (root likely required). I know that the phone tracks pointer location when you hover the pen over the tablet because, when plugging in both a mouse and the tablet to the phone, one can see the cursor moving. Unfortunately, the cursor only appears when the mouse is wiggled and disappears once the pen moves the cursor (so basically we get a cursor that flashes in and out really fast). On top of that, we can't click and drag while the cursor is doing the flashy thing.
Option 2: Edit device recognition
This, I imagine, would be a lot more work, but it would offer a nice quality of life feature. If we could get the phone to recognize the tablet as a connected mouse, the cursor should appear when we plug it in and disappear when disconnected. I'm not sure, however, that drawing tablets send the same type of data as mice do so the phone may not be able to interpret it regardless.
Option 3: An overlay app that tracks pointer location
While this would need to be made from scratch, I think it the most straightforward approach. An apk that puts a symbol over wherever the pointer location rests! Just enable it to draw over other apps and voila, instant cursor. This would require that the phone monitor cursor data without the stock cursor being on, though.
But yeah, until either something gets coded up, Samsung gives us an update, or Huion gets their stuff together, we're kinda stuck. If you're dead set on using the tablet regardless, the best I've been able to do is mark off the boundaries of "phone mode" with a pencil on the tablet, put a dot in the center, download a "crosshair" overlay app, and position the crosshair so that it lines up with the drawn dot on the tablet. Then you should have a point of reference for where you're about to tap! Scuffed? Absolutely. Functional? You bet.
Still haven't found the solution? The same problem occurs on Galaxy S7.
Derael said:
Still haven't found the solution? The same problem occurs on Galaxy S7.
Click to expand...
Click to collapse
Nope, nothing so far. Huion emailed me back saying that "the problem is weird" and that they'll get back to me "once our technicians figure out the problem". So we're pretty dead in the water without a nice piece of code.
Force Cursor/ pointer display in huion hs64 on samsung phones
Im here to ask if the problem was fix regarding the cursor pointer ? Im planning to buy this huion hs64 and currently using Samsung Galaxy A50
Nope......I tried using the hs64 on my A50 and still no cursor
Hi there! Something new? For some reason Samsung S series phones have a lock. Why the Note series works perfectly.
Esathn said:
Yep. I contacted Samsung support but got the "well, we don't support graphics tablets" speech, so brick wall there. Emailed Huion and they asked me to check my OTG and pointer settings and to contact Samsung support. I just replied that I did those things and that others were having the same problem so we'll see if we get any progress on that. In the meantime we'll just have to wait until someone decides to code something up for us muggles.
Speaking of code, and I'm no expert so grain of salt and all that, I've got a few theroies:
Option 1: Force cursor visibility always
The cursor DOES pop up when a mouse is plugged in, therefore by changing some variables, we should be able to force the cursor to always be on (root likely required). I know that the phone tracks pointer location when you hover the pen over the tablet because, when plugging in both a mouse and the tablet to the phone, one can see the cursor moving. Unfortunately, the cursor only appears when the mouse is wiggled and disappears once the pen moves the cursor (so basically we get a cursor that flashes in and out really fast). On top of that, we can't click and drag while the cursor is doing the flashy thing.
Option 2: Edit device recognition
This, I imagine, would be a lot more work, but it would offer a nice quality of life feature. If we could get the phone to recognize the tablet as a connected mouse, the cursor should appear when we plug it in and disappear when disconnected. I'm not sure, however, that drawing tablets send the same type of data as mice do so the phone may not be able to interpret it regardless.
Option 3: An overlay app that tracks pointer location
While this would need to be made from scratch, I think it the most straightforward approach. An apk that puts a symbol over wherever the pointer location rests! Just enable it to draw over other apps and voila, instant cursor. This would require that the phone monitor cursor data without the stock cursor being on, though.
But yeah, until either something gets coded up, Samsung gives us an update, or Huion gets their stuff together, we're kinda stuck. If you're dead set on using the tablet regardless, the best I've been able to do is mark off the boundaries of "phone mode" with a pencil on the tablet, put a dot in the center, download a "crosshair" overlay app, and position the crosshair so that it lines up with the drawn dot on the tablet. Then you should have a point of reference for where you're about to tap! Scuffed? Absolutely. Functional? You bet.
Click to expand...
Click to collapse
Hi there! Something new? For some reason Samsung S series phones have a lock. Why the Note series works perfectly.
Same, Huion H640p and a Samsung J7 Neo, No Cursor but the tablet works
Ok I know the OP was about a huion tablet, i currently have a wacom and the issue is with s10+ for some reason the tablet doesnt show up as a cursor though if I plug a mouse in it does, anyone any closer to resolve it?
I got the XP-Pen Deco Pro tablet
Actually the tablet itself ain't the problem but the device that you're using. I'm also a Samsung fanatics and sadly they are the only android device that do not support graphic features such as drawing tablet and so. However the tablet perfectly works in other android devices that has cursor enabled.
My problem on my android drawing tablet XP-Pen Deco Pro ( xp-pen.com/product/432.html ) is actually the same... cursor. As far as I know ver. 6.0 and above has cursor support in accessibility menu but the tablet isn't compatible to use as the mouse because enabling cursor from accessibility provides touchpad on the screen which is basically annoying. So if you'd like to use the drawing tablet, use it in a different device... you'll see that the problem is not the drawing tablet but the device you're using.
!!! Solution !!!
Esathn said:
I bought a USB graphics tablet (Huion HS64) that's compatible with Android 6 and above. Problem is that when I connect it, there's no pointer on the phone indicating where it is I'm about to tap. Touch works perfectly fine, but the "invisible mouse" problem is annoying.
Is there any way I can display the same pointer that comes up when I connect a USB mouse to the S10? Or perhaps a similar icon or dot via overlay? I'd be fine with it always being on if that's easier than having the phone recognize the tablet as a mouse.
My device isn't rooted, but I'm not opposed to it if it solves the problem. Thanks in advance!
Click to expand...
Click to collapse
It's funny that we took it this long to figure out. Thanks to the great rookie from stack exchange,
Open Settings --> About phone/tab --> Reset --> "Settings Reset".
Let the device restart. Now, be careful. Plug in OTG dongle only first. Then plug in the tab. Don't rush.
Point the stylus in the phone area. You will see a 1mm sized circle.
If it doesn't work, do an accessibility reset. And finally, the device reset. Samsung just wanted us to buy their S6 and S4 tabs instead of graphics tab. That's probably why there is this hustle.
You are welcome.
Thank you note
vishnu_karayil said:
It's funny that we took it this long to figure out. Thanks to the great rookie from stack exchange,
You are my HERO , thank you very much for your help .
“Feeling gratitude and not expressing it is like wrapping a present and not giving it .” – William Arthur Ward
Open Settings --> About phone/tab --> Reset --> "Settings Reset".
Let the device restart. Now, be careful. Plug in OTG dongle only first. Then plug in the tab. Don't rush.
Point the stylus in the phone area. You will see a 1mm sized circle.
If it doesn't work, do an accessibility reset. And finally, the device reset. Samsung just wanted us to buy their S6 and S4 tabs instead of graphics tab. That's probably why there is this hustle.
You are welcome.
Click to expand...
Click to collapse
Worked for S20 FE.
Would be great if it would work in dex.