Related
Hello,
I'm lookig for a guide how to twrp, root and install custom rom, on my Mi5 miui 10 global stable.
I'm not newbe I did a lot of flashing on my previus phones Nexus and others. But this time I feel lost. I sit on miui 10 global stable. When I try to to flash twrp I get reroll to mi recovery every single time. All guides I found in the Internet are dedicated to older android versions. Xiaomitool don't help too.
Can someone point me to the right direction? It is time to change rom on my Mi5 finally to give him boost b4 I buy something new.
Best regards
Amonlb
amonlb said:
Hello,
I'm lookig for a guide how to twrp, root and install custom rom, on my Mi5 miui 10 global stable.
I'm not newbe I did a lot of flashing on my previus phones Nexus and others. But this time I feel lost. I sit on miui 10 global stable. When I try to to flash twrp I get reroll to mi recovery every single time. All guides I found in the Internet are dedicated to older android versions. Xiaomitool don't help too.
Can someone point me to the right direction? It is time to change rom on my Mi5 finally to give him boost b4 I buy something new.
Best regards
Amonlb
Click to expand...
Click to collapse
Your bootloader is unlocked, right?
Then you need reboot to fastboot mode and flash latest official twrp via fastboot.
Like
Code:
fastboot flash recovery <path to twrp.img>
Have you tried it that way?
Phil_Smith said:
Your bootloader is unlocked, right?
Then you need reboot to fastboot mode and flash latest official twrp via fastboot.
Like
Have you tried it that way?
Click to expand...
Click to collapse
Bootloader is unlocked.
I did it that way but after twrp is installed I reboot and there is no twrp available. Only mi recovery.
To make it easier...
I would like to:
Flash twrp
Flash magisk and root
Flash firmware (why i need this?) Havoc os asks to flash it but I don't know why.
Flash havock os and gapps
Flash some mods for camera and sound
I don't understeand why twrp can't be flashed and I have no idea what is modified firmware for? Do I need this?
Thanks for your time
Try the the xiaomi eu rom guide .
I think you may need its custom bootloader , not the actual rom.
Than flash the firmware required for your custom rom and reboot directly to recovery again from twrp than rom and gapps , I hope that helps
Hi, i had the same problem, try this:
1. Flash twrp as usual(fastboot flash recovery twrp.img and then fastboot reboot)
2. When rebooting, you have to enter at recovery (vol up + power) . Don't allow phone to boot! In TWRP official page, on installation instructions , they say after installation you must enter in recovery to allow TWRP patch recovery rom, because some Roms after boot reinstall original recovery.
3. Now you should have TWRP installed.
If you do
fastboot flash recovery twrp.img
and then do
fastboot boot twrp.img
It's simpler and it will boot to recovery and patch the ROM to be permanently installed.
amonlb said:
Bootloader is unlocked.
I did it that way but after twrp is installed I reboot and there is no twrp available. Only mi recovery.
To make it easier...
I would like to:
Flash twrp
Flash magisk and root
Flash firmware (why i need this?) Havoc os asks to flash it but I don't know why.
Flash havock os and gapps
Flash some mods for camera and sound
I don't understeand why twrp can't be flashed and I have no idea what is modified firmware for? Do I need this?
Thanks for your time
Click to expand...
Click to collapse
First,fastboot flash recovery twrp.img
and then no reboot your phone, just to hold the key combo (vol up + power), and then you can enter the twrp mode once because the recovery will be changed when your phone has rebooted.
But you can use the only once twrp mode to install the zip .
If you just want to use MIUI 10, you will flashboot twrp everytime when you need twrp to do something.
PS: Forgive me pool English.
rmrbpt said:
If you do
fastboot flash recovery twrp.img
and then do
fastboot boot twrp.img
It's simpler and it will boot to recovery and patch the ROM to be permanently installed.
Click to expand...
Click to collapse
Thanks, this worked!
Hi ! I have just buy a mi 8 Global on Rom Global stable Pie V10.1.2.0 and I want to know how install Twrp and flash magisk for use magisk mod as Youtube vanced and Gcam or Notifications mods.
I do to Unlock the BL before ?
But after juste flash the Twrp dipper on Xiaomi.eu ? flash it on fastboot ? But after ? wipe Dalvik, cache, system & data and flash the Global stable Rom again and magisk ?
I don't understand Xiaomi I comes from Oneplus I read many post but I'm loose sorry
Thank you for help
Hi ! Nobody can help me ? Or if they had a link for root global Rom Miui 10 Pie ?
They had a tuto for mi 8 light bit nothing for mi 8
Can I unlock with a old Mi Account without waiting 2 weeks?
Relax, take your time and google everything you need, digest it first before you rush into doing something that you're not ready for.
By the time you become well informed yourself in two weeks time, then your phone will be ready to unlock.
Perfect timing.
Rommco05 said:
Hi,
first of all u need make request for unlock bootloader that will take 2 weeks for approved unlock BL
Click to expand...
Click to collapse
Hi ! Yes I do it Yesterday Thank you.
Just download miunlock tool. And Twrp 3.2.3.120 .
But When I flash it on fastboot and reboot to Twrp what I do ? Factory reset and format data ?
And after ? Flash global stable Pie Rom and remove encryption dm verity and magisk directly or do reboot to recovery before ?
Rommco05 said:
What u want to do, that depends
Click to expand...
Click to collapse
Hi ! I want to root the global Rom I use. Global V12.1.2.0. I have send for unlock it. Just do unlock now.
For root it do flash Twrp but After don't know ?
Rommco05 said:
If u interested in root, I suggest to you go to Global beta or some custom ROM based on MIUI, that just advice. Yes u need TWRP is way also without but this more practice. Flash TWRP which is posted here in Dev section this way:
fastboot flash recovery nameofrecovery.img
fastboot boot nameofrecovery.img
in TWRP flash avian nameofrecovery.img to recovery partition
Meantime download Magisk, latest is 18 and is good, put them to internal storage and flash... "abrakadara" and u are rooted
Click to expand...
Click to collapse
Ok thank you very much.
Just flash magisk on beta rom no need to wipe or format. And no flash remove encryption too.
Just flash Twrp on fastboot and flash again Twrp on Twrp and flash magisk and reboot.
Great thanks. Have a good day.
Ps : I think flash dev global but factory reset before flash twrp and magisk because I had mistake after change local and use theme.
Rommco05 said:
No need to wipe/format anything. When u will install beta (over updater app) factory reset will be automatically
Click to expand...
Click to collapse
Ok thank you I had install the beta with updater App but I do to configure it on boot and install App (use mi restore) for reply to you.
I'm on beta now just flash twrp now.
I don't factory reset it just flash magisk 18 on Twrp ?
But just a presision when reboot on Twrp just reflash Twrp img (install/image/recovery) because don't understand on recovery partition ? It's because treble my last phone are an oneplus 3 and no have treble partition and more easy to flash.
And every weeks they had an update of Dev Global Rom how do update it ? Flash the full Rom on Twrp and magisk to or can update it with updater App ?
Thanks have a good day.
Rommco05 said:
Yes that's right. Updates need be flashed in TWRP full version. Or have look into Pitch black recovery but still isn't tested
Click to expand...
Click to collapse
Ok ! Thanks.
But I think flash Xiaomi.eu rom based on china rom. The stable Rom.eu stable.
But nobody response me on forum .eu.
I'm on global stable if I flash the Xiaomi.eu Rom it's chinese Rom and different it's right ? I do Factory reset for flash it ?
What the difference of the Twrp on dev section and twrp dipper on Xiaomi.eu ? I do use the Twrp dipper for flash this custom and do flash again Twrp on Twrp too.
I have change because the global rom for me is less good than chinese ! I had a mistake with notifications push youtube never had notifs ? But receive on YouTube but never on mi 8. I had remove all battery energized on system ! Check all notifications system and on App but never receive notifications.
Thanks have a good day
Rommco05 said:
MiRoom is better than Xiaomi.eu. Before installing custom Miui Roms must format data. TWRP form Dev section is good
Click to expand...
Click to collapse
Ok thank you but MIRooms are not multi french langage and in French lot of people use Xiaomi.eu and for help is more good for me.
Ok do format data but if format data I loose encryption and don't do to flash the zip for remove it.
It's really a guys said me is better to buy a chinese version of mi 8 it's true... I have this global but no more people use it ! many people use chinese version of mi 8.
The chinese version of mi 8 are not encypted ? Thank you
Rommco05 said:
No that's isn't true, is much better owning Global version. Chines phones are also encrypted by default. So flash xiaomi.eu is up to your choice
Click to expand...
Click to collapse
Ok thank you I make the good choice.
But why if global version are better all guys use custom rom based on china version ?
I don't know if they had but I would like a custom rom based on global rom but with more option than can make 5x5 on mi launcher because with theme it crash and don't stay every day or can use different song fir App like Twitter on my oneplus use the ios Twitter song and know if is a tweat and for Google message can't have the message song work only for mi message etc etc..
For flash Xiaomi.eu you said format data but you know on Twrp chose wipe and format and data and type yes ? Or wipe data partition ? Because if format it loose encryption and when boot to rom no have mistake with DM verity ? Thanks.
ggkameleon said:
Ok thank you very much.
Just flash magisk on beta rom no need to wipe or format. And no flash remove encryption too.
Just flash Twrp on fastboot and flash again Twrp on Twrp and flash magisk and reboot.
Great thanks. Have a good day.
Ps : I think flash dev global but factory reset before flash twrp and magisk because I had mistake after change local and use theme.
Click to expand...
Click to collapse
Just install the room and start it to finish the installation.
Then go to fastboot and install twrp with the commands that Rommco05 already said.
Rommco05 said:
If u interested in root, I suggest to you go to Global beta or some custom ROM based on MIUI, that just advice. Yes u need TWRP is way also without but this more practice. Flash TWRP which is posted here in Dev section this way:
fastboot flash recovery nameofrecovery.img
fastboot boot nameofrecovery.img
in TWRP flash avian nameofrecovery.img to recovery partition
Meantime download Magisk, latest is 18 and is good, put them to internal storage and flash... "abrakadara" and u are rooted
Click to expand...
Click to collapse
And then install magisk with twrp, its easyer with an otg pendrive to avoid posible data encription.
Pescao said:
Just install the room and start it to finish the installation.
Then go to fastboot and install twrp with the commands that Rommco05 already said.
And then install magisk with twrp, its easyer with an otg pendrive to avoid posible data encription.
Click to expand...
Click to collapse
Hi ! Thanks for support. It's different than oneplus.
I'm on Dev Rom Global and stay for unlock the BL.
When I can unlock it I reinstall The Dev Global Rom or new update (every weeks) but wipe data on stock recovery (clean install) just start it as a new phone.
"I have a usb type-c otg " and then make that flash Twrp....& Magisk..
Thank you. Have a good day.
1990marcow1990 said:
Can I unlock with a old Mi Account without waiting 2 weeks?
Click to expand...
Click to collapse
No, you can't. I tried with my old mi 5s but it just works for 1 device.
Please help me. I can't seem to understand what exactly I need to do in order to install a custom ROM on my K20 Pro (Global 10.3.5.0.) I have tried following this (https://forum.xda-developers.com/k20...0-pro-t3953844) post thoroughly and others as well, but can't seem to exactly understand what I am required to do. Most custom ROM's state [Raphael], but as I purchased this device in India, it would most probably be [Raphaelin], after unlocking the Bootloader and installing TWRP, am I supposed to flash a Custom ROM (for ex. Lineage OS) directly or would I have to install a ROM which would make my device [Raphael]? Vendor and Firmware have gone over my head, I do not understand what I need to di. If someone could help me out, It would be mean a lot. Thank you.
Platinum_Pyth0n said:
Please help me. I can't seem to understand what exactly I need to do in order to install a custom ROM on my K20 Pro (Global 10.3.5.0.) I have tried following this (https://forum.xda-developers.com/k20...0-pro-t3953844) post thoroughly and others as well, but can't seem to exactly understand what I am required to do. Most custom ROM's state [Raphael], but as I purchased this device in India, it would most probably be [Raphaelin], after unlocking the Bootloader and installing TWRP, am I supposed to flash a Custom ROM (for ex. Lineage OS) directly or would I have to install a ROM which would make my device [Raphael]? Vendor and Firmware have gone over my head, I do not understand what I need to di. If someone could help me out, It would be mean a lot. Thank you.
Click to expand...
Click to collapse
If you're running stock MIUI and haven't moved to any custom MIUI's till date then you can straight away flash LOS. Moreover, most of the custom roms work on multiple vendors irrespective of whether it is a China Vendor or India or Global. It doesn't matter till the time the developer specifically asks you to be on a particular vendor.
Vendor isn't a dreaded thing. It's just the drivers needed to run the various components in the device (BT, WiFi etc). Till the time you don't wipe the vendor partion in twrp, you would always be good to go. You could carry on flashing custom roms w/o careing about the vendor.
Sent from my Redmi K20 Pro using Tapatalk
Sukhi said:
If you're running stock MIUI and haven't moved to any custom MIUI's till date then you can straight away flash LOS. Moreover, most of the custom roms work on multiple vendors irrespective of whether it is a China Vendor or India or Global. It doesn't matter till the time the developer specifically asks you to be on a particular vendor.
Vendor isn't a dreaded thing. It's just the drivers needed to run the various components in the device (BT, WiFi etc). Till the time you don't wipe the vendor partion in twrp, you would always be good to go. You could carry on flashing custom roms w/o careing about the vendor.
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
Thank you very much for your reply. So, just to check if I have understood correctly. I can just install TWRP and then flash Lineage OS straight away, right? I checked (https://forum.xda-developers.com/k20-pro/development/rom-lineageos-16-0-t3965311), and it mentioned:
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash proper vendor and firmware
Flash the latest build and GApps
Reboot
What is "proper vendor and firmware"? And would I also be required to flash this?
Thank you.
Platinum_Pyth0n said:
Thank you very much for your reply. So, just to check if I have understood correctly. I can just install TWRP and then flash Lineage OS straight away, right? I checked (https://forum.xda-developers.com/k20-pro/development/rom-lineageos-16-0-t3965311), and it mentioned:
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash proper vendor and firmware
Flash the latest build and GApps
Reboot
What is "proper vendor and firmware"? And would I also be required to flash this?
Thank you.
Click to expand...
Click to collapse
Go back to the Lineage instructions and read immediately below that. It starts P.S.
It explains exactly proper vendor and firmware means.
No you won't need to install anything for this step
Platinum_Pyth0n said:
Thank you very much for your reply. So, just to check if I have understood correctly. I can just install TWRP and then flash Lineage OS straight away, right? I checked (https://forum.xda-developers.com/k20-pro/development/rom-lineageos-16-0-t3965311), and it mentioned:
Instructions :
Download the latest build and GApps
Reboot to recovery
Flash proper vendor and firmware
Flash the latest build and GApps
Reboot
What is "proper vendor and firmware"? And would I also be required to flash this?
Thank you.
Click to expand...
Click to collapse
Nope ! You don't need to flash vendor + firmware as you already running an untouched stock MIUI build. That is for people who are coming from either modified MIUI builds (EU, Miroom etc) or custom roms with a different vendor (India device running on China Vendor)
Custom roms don't carry the Vendor Firmware files and you can only modify the existing Vendor when you move to other region stock or custom MIUI roms.
Back up your data on Internal storage to a safe place either on a PC or OTG. Skip this step if you have nothing important.
Boot In TWRP
Wipe System, Data , Cache , Dalvik
(Don't reboot at this point, Not Even a Recovery reboot)
Flash LOS
Flash GApps
Go to Advanced Wipe and Format Data by typing Yes
Reboot
Sent from my Redmi K20 Pro using Tapatalk
Sukhi said:
Nope ! You don't need to flash vendor + firmware as you already running an untouched stock MIUI build. That is for people who are coming from either modified MIUI builds (EU, Miroom etc) or custom roms with a different vendor (India device running on China Vendor)
Custom roms don't carry the Vendor Firmware files and you can only modify the existing Vendor when you move to other region stock or custom MIUI roms.
Back up your data on Internal storage to a safe place either on a PC or OTG. Skip this step if you have nothing important.
Boot In TWRP
Wipe System, Data , Cache , Dalvik
(Don't reboot at this point, Not Even a Recovery reboot)
Flash LOS
Flash GApps
Go to Advanced Wipe and Format Data by typing Yes
Reboot
Sent from my Redmi K20 Pro using Tapatalk
Click to expand...
Click to collapse
I'm trying to install a custom rom in K20 pro raphaelin. But it is getting stucked at recovery. Then I have to install stock ROM using MIFlash. Any help on this issue?
Custom ROM is successfully flashed in TWRP.
MyNameIsAbey said:
I'm trying to install a custom rom in K20 pro raphaelin. But it is getting stucked at recovery. Then I have to install stock ROM using MIFlash. Any help on this issue?
Custom ROM is successfully flashed in TWRP.
Click to expand...
Click to collapse
Did you do FORMAT Data (not just Wipe) when you installed your custom ROM, and before rebooting?
Hello there,
I'm using the Xiaomi.eu latest Beta rom ATM. I'm trying to flash other roms (like lineage OS 17.1 for example) but it seems to reboot to fastboot everytime. I've tried doing a clean flash, formatting data, dirty flashing. Nothing seems to help it boot into the new rom.
Clearly I'm doing something wrong. If I try flashing the recommended Chinese vendor firmware (stable version), I get an error 7..but my TWRP is up to date as recommended.
If anyone has any idea where I'm going wrong, that would help a lot.
Thanks
therightperson_630 said:
Hello there,
I'm using the Xiaomi.eu latest Beta rom ATM. I'm trying to flash other roms (like lineage OS 17.1 for example) but it seems to reboot to fastboot everytime. I've tried doing a clean flash, formatting data, dirty flashing. Nothing seems to help it boot into the new rom.
Clearly I'm doing something wrong. If I try flashing the recommended Chinese vendor firmware (stable version), I get an error 7..but my TWRP is up to date as recommended.
If anyone has any idea where I'm going wrong, that would help a lot.
Thanks
Click to expand...
Click to collapse
Don't know what your doing wrong, but this is my failsafe method should nothing else work.
Flash the latest Chinese 11.0.5 fastboot ROM. Make sure you don't lock the bootloader if using the Mi Flash Tool.
Boot into MIUI once to allow it to finalise the install, you don't need to do the initial phone setup once it boots into MIUI.
Boot into fastboot and install TWRP. I recommend the latest from mauronofrio which should be 3.1.1-32
Boot immediately into TWRP. I use the volume up button while powering up the phone.
Perform a factory reset in TWRP (using the swipe button), then format data (need to type 'yes' to confirm).
Reboot into TWRP using the TWRP boot menu, this ensures the newly formatted data partition is correctly mounted.
Copy over the ROM you want and GApps if needed, then flash.
Boot into your new ROM, everything should be OK. Then boot back into TWRP to install Magisk if you want root.
Yep that seems to have done the trick. At first I was getting frustrated because I thought I was downloading the right Chinese ROM, turns out I was downloading the recovery version instead of the fastboot one.
I think it wasn't working because I was on the beta channel. Switching over to the stable channel meant I had to go through a fastboot flash apparently. I've seen this before on my OP3.
Got lineage OS loaded, thanks for your help!
As the title says. I managed to unlock the bootloader but now I need to install TWRP to install magisk, right? How do I get around doing that? There are some shady downloads on the internet but on twrp.me there is nothing for the phone. What do I do? Thanks in advance!
the device does not have official TWRP, the others available on telegram group do work fine
Thank you, but what telegram group? Could you forward me a link to it or something?
GeoS__ said:
Thank you, but what telegram group? Could you forward me a link to it or something?
Click to expand...
Click to collapse
not found | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
SubwayChamp said:
not found | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Click to expand...
Click to collapse
Thanks a lot. Is there a spesn version? Can I flash this spes version on my spesn phone? Thank you in advance
GeoS__ said:
Thanks a lot. Is there a spesn version? Can I flash this spes version on my spesn phone? Thank you in advance
Click to expand...
Click to collapse
spes and spesn are the same device. the "n" in spesn stands for NFC support
MarvavCZE said:
spes and spesn are the same device. the "n" in spesn stands for NFC support
Click to expand...
Click to collapse
Oh really? Can i flash it then? I really do not care much for NFC.
GeoS__ said:
Oh really? Can i flash it then? I really do not care much for NFC.
Click to expand...
Click to collapse
Of course, you can, in recovery builds these differences don't matter.
just rooted with FASTBOOT and latest Magisk.App
How to Root Xiaomi MIUI 13 based on Android 12 via Magisk
In this guide, we will show you the detailed steps to root your Xiaomi device running MIUI 13 based on Android 12 via Magisk.
www.droidwin.com
Installation
The Magic Mask for Android
topjohnwu.github.io
Current installed MiUi version needs to match the complete Recovery Image you have to download
in my case:
https://bigota.d.miui.com/V13.0.11.0.RGKEUXM/spesn_eea_global_images_V13.0.11.0.RGKEUXM_20220606.0000.00_11.0_eea_5c36ea339b.tgz
or
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Extracting the Boot.Img - let magic app patch it on your fone copy back to Computer and install it like described on "droidwin":
fastboot flash boot magisk_patched-25100_0UGhl.img
have fun
linolino
GeoS__ said:
As the title says. I managed to unlock the bootloader but now I need to install TWRP to install magisk, right? How do I get around doing that? There are some shady downloads on the internet but on twrp.me there is nothing for the phone. What do I do? Thanks in advance!
Click to expand...
Click to collapse
I am in the same situation,
ie. I have a Note 11 Pro without NFC
[Phone code: SPES ]
• bootloader unlocked from Xiaomi (after 7+ days waiting)
• running MIUI Global 13.0.15 [ RGCMIXM ] , Android v 11 RKQ1.211001.001
I have following TWRP
- twrp-3.6.2-12.1-21.06.22
- twrp-3.6.2_12-0-spes-Jabiyeff
and I tried to flash TWRP in fastboot (below), but it always fails and does not work
Code:
fastboot flash recovery twrp.img
I'm used to flashing TWRP and ROMs, but it's been a while since I touched a Xiaomi device,
so I am wondering is there anything different that I need to do ?
also, any 'new methods' for flashing Magisk ?
( and passing SafetyNet )
I am typing this on my custom ROM. I did not flash through fastboot. I booted to the twrp img with it though (fastboot boot twrp.img if i remember correctly.) and, well, i flashed from the option inside twrp
GeoS__ said:
I am typing this on my custom ROM. I did not flash through fastboot. I booted to the twrp img with it though (fastboot boot twrp.img if i remember correctly.) and, well, i flashed from the option inside twrp
Click to expand...
Click to collapse
so, you flashed TWRP recovery, by booting the TWRP from your PC ?
OK... I can try that.
exactly. i connected with adb and checked with adb devices, then pushed the twrp image to the phone and booted off of it through fastboot. if it works booting off of the img it's pretty safe to flash
To flash a custom recovery on Spes, you need to first run the following command in fastboot on the pc:
fastboot boot XXX.img (this is the name of twrp/ofox/Shrp image)
then inside the recovery, you must go to advanced and select the option flash this twrp, with that the recovery is installed by default. But remember that every time you install a new rom, the recovery will change, so you should flash twrp every time you finish installing a new rom.
Microsheepcl said:
To flash a custom recovery on Spes, you need to first run the following command in fastboot on the pc:
fastboot boot XXX.img (this is the name of twrp/ofox/Shrp image)
then inside the recovery, you must go to advanced and select the option flash this twrp, with that the recovery is installed by default. But remember that every time you install a new rom, the recovery will change, so you should flash twrp every time you finish installing a new rom.
Click to expand...
Click to collapse
exactly! twrp even offers a checkbox to automatically reflash itself after the rom when flashing
interesting, it seems to work a little bit different than what I did before! thx for sharing your knowledge
metaxda said:
I am in the same situation,
ie. I have a Note 11 Pro without NFC
[Phone code: SPES ]
• bootloader unlocked from Xiaomi (after 7+ days waiting)
• running MIUI Global 13.0.15 [ RGCMIXM ] , Android v 11 RKQ1.211001.001
I have following TWRP
- twrp-3.6.2-12.1-21.06.22
- twrp-3.6.2_12-0-spes-Jabiyeff
and I tried to flash TWRP in fastboot (below), but it always fails and does not work
Code:
fastboot flash recovery twrp.img
I'm used to flashing TWRP and ROMs, but it's been a while since I touched a Xiaomi device,
so I am wondering is there anything different that I need to do ?
also, any 'new methods' for flashing Magisk ?
( and passing SafetyNet )
Click to expand...
Click to collapse
Have these twrp you used decrypted the device succesfully? The both twrp i used didnt work on decrypt, and both bootlooped my phone after trying to flash them to recovery(others/flash to device), The one that worked on me was a unnoficial Ofox
UltimaDea said:
Have these twrp you used decrypted the device succesfully? The both twrp i used didnt work on decrypt, and both bootlooped my phone after trying to flash them to recovery(others/flash to device)
Click to expand...
Click to collapse
This is actually pretty tricky. I found 5 different recoveries for spes/n:
OrangeFox-R11.1_A12.1-Unofficial-spes.img
twrp_v.3.6.2_11_spes-2022.08.14.img
twrp-3.6.2_12-0-spes-Jabiyeff.img
twrp-3.7.0_12-0-spes-dblenk9.img
and the one and only working one:
twrp_3.6.1-spes.img (google it), my SHA256 is: 27335ab466fadb458e090bce098b3bc9302b2876d0faf392371a23bf6fe902c
Only with this last one I was able to successfully decrypt my existing (PIN protected!) data partition of the following ROM I currently use: MIUI Global 13.0.13.0 (RGKEUXM)
I hope this helps anybody.
Also I just installed Magisk 25.2 zip via this TWRP version and its working like a charme.
Edit: Flash TWRP via fastboot with the following fastboot command:
"fastboot boot twrp.img"
twrp.img is the name of your twrp file.. this will boot up this TWRP and You can directly check if You can decrypt ur existing data partition.. if You succeed then go to Advanced and click on "Flash current TWRP"
gentano said:
This is actually pretty tricky. I found 5 different recoveries for spes/n:
OrangeFox-R11.1_A12.1-Unofficial-spes.img
twrp_v.3.6.2_11_spes-2022.08.14.img
twrp-3.6.2_12-0-spes-Jabiyeff.img
twrp-3.7.0_12-0-spes-dblenk9.img
and the one and only working one:
twrp_3.6.1-spes.img (google it), my SHA256 is: 27335ab466fadb458e090bce098b3bc9302b2876d0faf392371a23bf6fe902c
Only with this last one I was able to successfully decrypt my existing (PIN protected!) data partition of the following ROM I currently use: MIUI Global 13.0.13.0 (RGKEUXM)
I hope this helps anybody.
Also I just installed Magisk 25.2 zip via this TWRP version and its working like a charme.
Edit: Flash TWRP via fastboot with the following fastboot command:
"fastboot boot twrp.img"
twrp.img is the name of your twrp file.. this will boot up this TWRP and You can directly check if You can decrypt ur existing data partition.. if You succeed then go to Advanced and click on "Flash current TWRP"
Click to expand...
Click to collapse
3.6.1 only works for MIUI A11 ROMs
3.6.2 only works for AOSP and A12 MIUI (but no for MIUI ROM flashing)
3.7.0 fully works for any ROM except A11
gentano said:
This is actually pretty tricky. I found 5 different recoveries for spes/n:
OrangeFox-R11.1_A12.1-Unofficial-spes.img
twrp_v.3.6.2_11_spes-2022.08.14.img
twrp-3.6.2_12-0-spes-Jabiyeff.img
twrp-3.7.0_12-0-spes-dblenk9.img
and the one and only working one:
twrp_3.6.1-spes.img (google it), my SHA256 is: 27335ab466fadb458e090bce098b3bc9302b2876d0faf392371a23bf6fe902c
Only with this last one I was able to successfully decrypt my existing (PIN protected!) data partition of the following ROM I currently use: MIUI Global 13.0.13.0 (RGKEUXM)
I hope this helps anybody.
Also I just installed Magisk 25.2 zip via this TWRP version and its working like a charme.
Edit: Flash TWRP via fastboot with the following fastboot command:
"fastboot boot twrp.img"
twrp.img is the name of your twrp file.. this will boot up this TWRP and You can directly check if You can decrypt ur existing data partition.. if You succeed then go to Advanced and click on "Flash current TWRP"
Click to expand...
Click to collapse
Both the TWRP 3.6.2-12.1 and TWRP 3.7.0_12-0-spes works on my phone (SPES Global)
I am on android 12 version of MIUI 13. In fact I used the TWRP 3.7 to flash MIUI13.EU 13.0.5 A12 ROM and it works.
The two versions above can decrypt my phone without any problem. MTP also works in recovery mode.
Your phone is using Android 11. Probably that's the reason the TWRP versions I've mentioned above does not work for you.
I tend to agree with NeoSDAP.