I recently changed the battery in my 9T, I turned on everything fine, charged it to 99%, downloaded an update, the first since it was new, when restarting the phone it did not start again, it stayed on a black screen I assume that This brick, when I connect it to the PC, the device manager recognizes it as "qualcomm hs-usb qdloader 9008" it just doesn't let me flash it on my flash in that mode. Try this: Leave the power button pressed for two days, to force it to discharge, connect the charger, it shows the discharged battery icon, but after a moment it disappears and returns to the same, completely black screen as it is not turned on and the PC detects it the same in "qualcomm hs-usb qdloader 9008" try that method that I read right here in a post recently but it did not work for me. So my only hope I assume is to pay for an online unbrick service, they could help me with a page or user that is trustworthy. Thanks
Related
Hi!
I need your help because my touchpas seems dead or bricked...
In april , I left it charging for a week, i forgot it, and when i returned, it was shut down and impossible to boot.
I tried all the keys combinations and nothing.
So i tried the qpst and tpdebrick method.
The TP was reconised on win8 as " Qualcomm hs-usb QDLoarder 9008" and the qpst emmc download ran well, once on ubuntu I had an error,impossible to use tpdebrick.
I tried with power + home at least a minute and the red battery icon displayed for one half second .
Yesterday, I followed this topic, battery is charging since.
Today, I disconnected it, with a multimeter, I have only 2.11V on the green wire, nothing on the pink + .
Do I have to change the battery ?
It it a brick?
Hello,
I have the HTC One (M7) from AT&T. The phone has never been rooted and I have not yet unlocked it bootloader. I have not done any of these modifications to it. I was simply using it when it turned off and then got really hot.
When I try to turn it on, the screen stays black even though it vibrates after 15 secs (like when it turns on). If I connect it to a wall charger the screen turns on with the battery icon and the red light blinking. I have drained the battery and tried the battery calibration trick (holding power and the vol + - buttons while using a bright light) and it has not worked.
When I plug it to my Windows PC it is not recognized except for today when it got recognized while I tried the battery calibration trick but the driver that was installed was something like this: Qualcomm HS-USB QDLoader 9008. I read in another thread that a user went through the same thin and some of the comments simply recommended him to take it to a store or that his motherboard was fried.
Is my phone bricked? Since I am not yet sure about this. And if not, is there a way to bring it back?
serrano4 said:
Hello,
I have the HTC One (M7) from AT&T. The phone has never been rooted and I have not yet unlocked it bootloader. I have not done any of these modifications to it. I was simply using it when it turned off and then got really hot.
When I try to turn it on, the screen stays black even though it vibrates after 15 secs (like when it turns on). If I connect it to a wall charger the screen turns on with the battery icon and the red light blinking. I have drained the battery and tried the battery calibration trick (holding power and the vol + - buttons while using a bright light) and it has not worked.
When I plug it to my Windows PC it is not recognized except for today when it got recognized while I tried the battery calibration trick but the driver that was installed was something like this: Qualcomm HS-USB QDLoader 9008. I read in another thread that a user went through the same thin and some of the comments simply recommended him to take it to a store or that his motherboard was fried.
Is my phone bricked? Since I am not yet sure about this. And if not, is there a way to bring it back?
Click to expand...
Click to collapse
unfortunately QHSUSB_DLOAD mode means, as you said, a defective motherboard. You'll have to send the phone for repair.
sorry.
I've got rooted phone, least update frome about 15/11, MIUI 8, everything worked fine. Today phone stopped, before I thought I had 40-30%, for sure not 0% and phone died. It's not charging with any charger, any wire (3 different wire, 3 different plugs or computers) Computer with in I rooted (so with drivers needed) not conecting also. No LED flashed.. It happened suddenly, with no changes before. I switch the phone and is no answere no led flash. Help. its bricked
My quastion is - Is any secret code to charge my battery?
just started, after 4 hours, so it's no solution
again, phone broke down complytly, no reaction next 3-4 hours (means no sign its working, no led whilst charging, no any sign its on, computer doesnt see a phone. I tried all of combinations of off-keys and +vol -vol like a recovery or fastboot. NOTHING. the phone has been bricked at all for me, than starterd....****in JUST. Charged on the same wire, charger like 10 minutes before, some bull**** at all
Can you check if any device shows up in Device Manager when plugging your phone to the computer? Like qualcomm hs-usb qdloader 9008 or similar.
I woke up this morning with my tablet being off. I tried to turn it on but no dice. I thought it might be dead but when plugged in the red led didn't light. then I plug it into my PC it was detected as Qualcomm HS-USB Qdloader 9008. I remember from Evo 3d days that it meant it was a brick. One thing I always tried on old devices was pull the battery but this guy is sealed up tight. With the prospect of a brick on my hands I peeled the bottom half of the back cover open. I was able to unplug the battery without fully removing the back cover. To my surprise it booted right up!!! I thought I would share my experience.
Hi so my ROG Phone 2 Suddenly blacked out yesterday after being pulled out of charging
and now it cannot be turned on, doesnt vibrate when charged, but it was detected in my PC (side port plugged in) as "Qualcomm HS-USB QDLoader 9008"
i tried flashing with miflash apps but no luck
and i cannot go into recovery mode or anything
brought it to service center today and the gut in the service center said it need motherboard replacement
is it really unfixable? if its fixable can anyone help?