Download: https://drive.google.com/file/d/1-1XY9QFnF8UIqfJNdfiV5CYnfcJQS1Ze/view?usp=drivesdk
Comand: fastboot flash recovery twrp-3.6.0_11-0-cebu.img
Related
Hey Guys today I wanted to share a little tutorial on GSI so if you guys didn't know the One Plus 6T supports Treble Natively So with that being said you can Flash GSI
I am on latest 9.0.11 I have not tested any other firmware
WARNING IM NOT RESPONSIBLE IF YOU GET A BRICK OR YOUR PHONE SELF DESTRUCTS JUST USING MY KNOWLEDGE TO FIGURE THINGS OUT FOR OUR USE
OFFICIAL INSTRUCTIONS
This arent my steps I found them looking around and decided to test and add Some Things from my part and finds all credits of these steps go to the author of the thread.
The correct installation procedure of a GSI on the One Plus 6t
Make sure you unlocked the bootloader and that you have the latest ADB and Fastboot from Google, I used minimal ADB worked fine for me but CAUTION if it doesn't download the latest ADB from google
Now in Fastboot flash, the following, WITHOUT rebooting in between! this needs to be done all in one go!
THE FIRST STEP DO NOT MISS
First Step
Boot to Twrp and you need to flash the avbctdisable.zip
Link- https://drive.google.com/open?id=1GhZK04FDx7WlyKb32qq0gR-SO0t51CVE
2nd Stage
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Use the STOCK boot image!
Then flash the GSI system image of your choice
ON A/B Partition
fastboot flash system_a gsi.img
fastboot flash system_b gsi.img
Replaced by the first Step Ignore
Then flash STOCK vbmeta image with the specific commands!
Command for VBMETA
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
ONLY USE A/B ARM64BIT GSI
Continue to Next Steps
---------------------------------------------------------------------------------------------------------------------------------------------------
Extra steps I had to do When flashing if you are flashing any GSI DO NOT FLASH TWRP AFTER
STEPS After GSI flashed
1.Boot TWRP thru Fastboot
2.Wipe Data and Dalvic Art Cache
3.Flash the TWRP installer
4.Reboot to System
5. Reboot To Twrp Flash Gapps
6. Reboot To Twrp Flash Magisk And Optional Custom Kernel
7.Reboot
8.Profit
Original Link Thread
https://forum.xda-developers.com/oneplus-6/how-to/treble-mistery-solved-developer-t3800716
Download Links-
TWRP- https://forum.xda-developers.com/on...overy-unofficial-twrp-touch-recovery-t3861482
List of GSI- https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Magisk- https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Gapps- https://opengapps.org/
OOS 9.0.11 Fastboot- https://androidfilehost.com/?fid=11410963190603886130 YOUR GONNA NEED THE BOOT.IMG FROM HERE
Thanks To All The Devs That Make Development Possible Once Again all Credits Go to them this is just a write-up.
KEEP IN MIND NOT ALL GSI WORK PERFECTLY KEEP IN MIND
ISSUES YOU MIGHT BUMP INTO
CRASHES
SOME THINGS NOT WORKING
LIKE WIFI, BLUETOOTH ECT...
(FOR RR PIE GSI POST SPECIFIC)
For Flashing RR Pie GSI
STEPS
1. Boot to Twrp and you need to flash the avbctdisable.zip
Link- https://drive.google.com/open?id=1GhZK04FDx7WlyKb32qq0gR-SO0t51CVE
2. Reboot to Bootloader
3. Flash OOS Stock 9.0.11 Img
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
4.Then Flash GSI
fastboot flash system_a RR.img
fastboot flash system_b RR.img
5. Then Fastboot boot to TWRP
6.Wipe Data and Dalvic Art Cache
7.Reboot to Fastboot
8 .Fastboot Boot to Twrp Again then Flash Twrp Installer
9. Reboot Device After Fully Boot Reboot To Twrp Flash Gapps, Magisk, Optional Custom Kernel
10. Profit
Links-
Ressurection Remix- https://forum.xda-developers.com/pr...0-resurrection-remix-v7-0-arm64-32-b-t3891636
Gapps- https://opengapps.org/
FOR ERROR 70 WITH GAPPS
Steps
Boot Twrp
Click on wipe
Advance wipe
Click on system
Then Repair or Change File System
Then Resize File System
Flash Gapps Profit.
Added some steps for anyone looking to flash RR Pie and changed some steps Around
thanks,
i used before "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img "
Wifi does not work on any gsi rom
I just installed Corvus GSI ROM following the above instructions, wifi works fine, almost everything works fine... only one thing is bothering me bad... I cannot adjust the brightness, it burns my eyes. I found a video on youtube in which it is said that this is something general for GSI... it's a sin! Anyway, thank you @carbon271!
I'm trying this with the Android 12 Beta 5 GSI, starting on OOS 9.0.11, but ending up in a bootloop. Has anyone else had any success with Android 12 GSIs on the 6t?
Hi, I don't know if things have changed in A.59, but, after unlocking to bootloader and flashing TWRP I can't get into recovery!
fastboot flash recovery TWRP-UNOFFICIAL-RMX2020-3.5.2-10-STABLE.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Poweroff (by pressing power for 10ish seconds), then
Power + Vol+
doesn't work.
The stock firmware seems to rewrite the recovery image if it gets a chance to boot
fastboot boot TWRP-UNOFFICIAL-RMX2020-3.5.2-10-STABLE.img
doesn't work
I managed to get into TWRP a few days ago by random key presses and usb cable plugging but no longer.
Alternatively can I flash a rom/GSI from fastboot?
fastboot flash system ~/lineage-17.1-20210512-UNOFFICIAL-treble_arm64_avS.img
doesn't work
Many thx guys..
OK, after watching some YT's I realised my fastboot version must have been old as I couldn't:
fastboot reboot recovery
I've used the latest version I'm in TWRP
Hey,
I flashed new vendor EU firmware with android 11 then reboted phone it boot normally to system "Evolution X". Next I downloaded update and after click install it rebooted to fastboot.
I can't boot to recovery because it's always reboot to fastboot. So tried to install again OrangeFox recovery but after usage command "fastboot reboot recovery" I got message "fastboot: usage: unknown reboot target recovery" and it's still rebooting to fastboot. Tried Power + Volume UP.
Any solution for that?
Okay, if someone will have simillar problem just download MIUI Official ROM - Fastboot version:
https://xiaomifirmwareupdater.com/miui/raphael/
Then unpack it and flash dtbo.img - fastboot flash dtbo dtbo.img
And now everything should works fine.
Teleseil said:
Okay, if someone will have simillar problem just download MIUI Official ROM - Fastboot version:
https://xiaomifirmwareupdater.com/miui/raphael/
Then unpack it and flash dtbo.img - fastboot flash dtbo dtbo.img
And now everything should works fine.
Click to expand...
Click to collapse
Thank you so much it worked !!
Hi,
I have a Realme X2 Pro RMX1931 EU version with unlocked Bootloader.
Yesterday I was trying to Root it and install TWRP. I Rooted it successfully, but when I tried to install TWRP using Fastboot adb, my phone bricked.
Now I can't go out the fastboot/bootloader mode. OS and Recovery unaccessible.
I've tried to run this commands without any change:
- fastboot -w && fastboot erase system
- fastboot flash boot boot.img
- fastboot flash system system.img
- fastboot flash recovery recovery.img
- fastboot flash vendor vendor.img
- fastboot flash vbmeta vbmeta.img
Any idea or suggestion to solve this problem? Thanks!
Ricedroid 8.6
Unlock the bootloader,
Go to fastboot mode,,
Type
Fastboot reboot bootloader
Fastboot reboot fastboot
Fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
(Vbmeta.img extract from your current stock rom).
Fastboot erase system
Fastboot reboot fastboot
Fastboot flash system system.img
(System.img is downloaded gsi rom and extract the zip and put it in system.img )
Fastboot -w
Fastboot reboot bootloader
Fastboot erase userdata
Fastboot reboot
(After mobile rebooting or go to the recovery mode and you need to format data wipe data in recovery mode).
Installation method of gsi rom
1st you install treble info apk
Then you will see supported or not..
My device is realme 8 pro
I installed currently ricedroid 8.6 arm64- slim bgN
Everything is working properly
Volte working,
(You need to some sitting in treble sitting).
(Go to sitting,
Phh treble sitting,.
Ims features,
Click
Requist ims network,
Presence of 4 g network
Then,
Click install ims apk for qualcomm vendor.
Then apk downloaded,
Then install it.
Facelook working,.
I don't know about fingerprint because before install gsi rom my fingerprint already gone.
I am definitely going to try this. But before I do I need a way to go back to stock rom.
I already have a 8 Pro(IN) bootloader unlocked .
I remember using the ofp flash tool for flashing realme ui 3.0 from 2.0... on my device.
Striker3214 said:
I am definitely going to try this. But before I do I need a way to go back to stock rom.
I already have a 8 Pro(IN) bootloader unlocked .
I remember using the ofp flash tool for flashing realme ui 3.0 from 2.0... on my device.
Click to expand...
Click to collapse
You can revert back to rui in realme 8 pro with this method.
1.) First of all you need
laptop,
Usb data cable,
Minimal adb & fastboot setup,
firmware.
MCT ofp extractor tool.
and Your device.
Download below files.
Firmware:
Download your device Firmware (ofp file).
MCT OFP extractor tool:
https://drive.google.com/file/d/1-MgGdT9fxi2LtJ1DIOxLVSM67thj9EpG/view?usp=drivesdk
Minimal adb & fastboot setup:
ADB & FASTBOOT.rar | by IamNH for Realme 2 Pro
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
2.) Extract the ofp file package by mct ofp extract tool.
3.) Request to unlock your device bootloader by indeapth test apk, once approved then you can start deep testing and unlock bootloader.
4.) connect your device with laptop.
5.) Open minimal adb & fastboot terminal.
and flash this images files by below cmd.
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash metadata metadata.img
fastboot flash opporeserve2 opporeserve2.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
Note: Flash this only 3 super images
fastboot flash super super.0.xxxxxx.img
fastboot flash super super.1.xxxxxx.img
Note: During super 2 flash check super_map.csv file for related country
fastboot flash super super.2.xxxxxx.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vbmeta_vendor vbmeta_vendor.img
fastboot flash vbmeta vbmeta.img
fastboot flash userdata userdata.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot -w
fastboot reboot
Disclaimer: I am not responsible for bricked devices, dead SD cards, etc!
Don't Lock your device bootloader otherwise it will brick and you have to go service centre for fix.