Hello everyone, I have a Pumpkin RQ0255 (rk3188) unit: rk3188-eng4.4.4 29032016 firm
What happened is that I wanted to upgrade to the firm Malasyk, but after installation is complete, the unit will not boot again, the screen is dead.
When I press the reset button, the lights blink one second, but nothing happens.
Anyone can guide me ??
Thank you
Had the same issue, read through this! I used a windows 10 laptop and it all worked great!
http://forum.xda-developers.com/and...d-kgl-unit-t3457538/post68656680#post68656680
Resusan said:
Hello everyone, I have a Pumpkin RQ0255 (rk3188) unit: rk3188-eng4.4.4 29032016 firm
What happened is that I wanted to upgrade to the firm Malasyk, but after installation is complete, the unit will not boot again, the screen is dead.
When I press the reset button, the lights blink one second, but nothing happens.
Anyone can guide me ??
Thank you
Click to expand...
Click to collapse
You do not have a Pumpkin, they are sellers, you probably have a Klyde but you cant find out until you get your screen on. I suspect that the problem is that the Malaysk ROM that you tried to load looks for a "C" at the end of the MCU name and it is a later MTCC based ROM, you can probably upgrade your MCU to an MTCC one and not have the problem, but first I would install @dsa8310's ROM from here :
http://forum.xda-developers.com/showpost.php?p=68469248&postcount=877
Post in that thread for more help.
I dont think @shawndak's suggestion is likely to help because it is for MTCD units.
typos1 said:
You do not have a Pumpkin, they are sellers, you probably have a Klyde but you cant find out until you get your screen on. I suspect that the problem is that the Malaysk ROM that you tried to load looks for a "C" at the end of the MCU name and it is a later MTCC based ROM, you can probably upgrade your MCU to an MTCC one and not have the problem, but first I would install @dsa8310's ROM from here :
http://forum.xda-developers.com/showpost.php?p=68469248&postcount=877
Post in that thread for more help.
I dont think @shawndak's suggestion is likely to help because it is for MTCD units.
Click to expand...
Click to collapse
Its in the MTCD forum but my unit is a MTCB. So it will work on a MTCB! Just flash the proper factory rom
shawndak said:
Its in the MTCD forum but my unit is a MTCB. So it will work on a MTCB! Just flash the proper factory rom
Click to expand...
Click to collapse
Ah, I see.
No need to flash the factory ROM - @dsa8310's xposed mod fools the ROM into thinking theres a "C" at the end of the MCU version number, so it will work on any MTCB unit KLD MTCC MCU or not.
typos1 said:
Ah, I see.
No need to flash the factory ROM - @dsa8310's xposed mod fools the ROM into thinking theres a "C" at the end of the MCU version number, so it will work on any MTCB unit KLD MTCC MCU or not.
Click to expand...
Click to collapse
Good to know! I did factory after I got the black screen. Was nervous i'd mess it up even more if I flashed a different rom!
Hello,
I purchased a Android 4.2.2 Device on 2 years ago for Mazda 3 2010.
Screen is 800x480 that's what I know.
Today it's stucked on startup screen.
I tried to reset but it requires image files.
Could you please help me finding a suitable image file for this device?
There's no brand name on it.
Thanks in advance.
Eren
Helow,
I bought a navigation with android Panlelo (but after several searches I found out that it is produced by Ezonetronic) Model: RM CT001. After a month of use has stuck in the logo screen, starts the logo for 10 seconds and then resets. I would also need to write the andoid's software directly to mcu but I do not find this firmware to do that. Someone can help me with this. I received something from the producer, but it is an update to the system and it does not work unless the boots system. Something that does not happen to me. I need this help to keep it out just a dust support after I give the money on it.
Thanks in advance
Hello all,
hope someone can help.
I wanted to root my device and was following this guide.
[GUIDE] For Newbs!How to [RECOVERY,ROOT] for .291 MM Z3C(Locked Bootloader)
Hi! So i created this thread because I am experienced to rooting and flashing recoveries etc. but i was new to xperia world. So when i wanted to flash new recovery, i had too many questions and little answers. However, i did it :D Ofcourse...
forum.xda-developers.com
Unfortunately after I flashed the .ftf file the phone just goes to a black screen. It seems to tuern on as I can see the black scren partially light up but there is no android/ sony boot screen etc.
Any help would be really appreciated.
Thankyou.
Hi guys.I need your help.I will try to give you as much info as i can.You can also ask me.
I tried to unlock rom.Which i did with success.
After that i really got confused and did something wrong with fastboot flash revovery etc etc etc.Now its doesnt boot and its get a short loop and i get Team win recovery Project 31.1.1.
My location is Greece
I tried to download EVA-L09C150B389 but i cant find nowhere.
I dont care to have the same firmware.I dont even mind to install Linage but i dont know what to do since i messed it up.
I just want to make it boot again and be usable.
please help me
Model: EVA-L09
Firmware ver.: EVA-L09C150B389
SN: MWS0216B01002821
Vendor: dt
Country: ar
I messaged you but not about your problem