Helow,
I bought a navigation with android Panlelo (but after several searches I found out that it is produced by Ezonetronic) Model: RM CT001. After a month of use has stuck in the logo screen, starts the logo for 10 seconds and then resets. I would also need to write the andoid's software directly to mcu but I do not find this firmware to do that. Someone can help me with this. I received something from the producer, but it is an update to the system and it does not work unless the boots system. Something that does not happen to me. I need this help to keep it out just a dust support after I give the money on it.
Thanks in advance
Related
I have BUILD phone from Microsoft and it start random rebooting. I then tried to reset it using the hardware reset method. Saw gears for hours, finally decided to power it off and now it just runs battery down rebooting to Nokia logo.. then off... Nokia logo.. then off...
I have Nokia Care Suite and have tried to re-flash it and been successful with only one ROM but it was an ATT one that now has the logo but the rebooting started again.
Questions:
I would like to try to salvage this phone to any ROM that will allow me to have a Windows Phone 8 os again. I don't know which versions to try. I have tried a lot of the rogers, euro, and others and get a message on not supported for device.
I will gladly 'donate' to someone that can help me out with this device. Ultimately, I would like to have something that would give my internet tethering back on my unlimited AT&T plan if possible.
Any help?
bryanb2 said:
I have BUILD phone from Microsoft and it start random rebooting. I then tried to reset it using the hardware reset method. Saw gears for hours, finally decided to power it off and now it just runs battery down rebooting to Nokia logo.. then off... Nokia logo.. then off...
I have Nokia Care Suite and have tried to re-flash it and been successful with only one ROM but it was an ATT one that now has the logo but the rebooting started again.
Questions:
I would like to try to salvage this phone to any ROM that will allow me to have a Windows Phone 8 os again. I don't know which versions to try. I have tried a lot of the rogers, euro, and others and get a message on not supported for device.
I will gladly 'donate' to someone that can help me out with this device. Ultimately, I would like to have something that would give my internet tethering back on my unlimited AT&T plan if possible.
Any help?
Click to expand...
Click to collapse
The only version I can seem to flash to so far is:
(059L848) RM820_059L848_1232.5962.1314.0001_961.vpl (RM-820 NDT AMERICAATT Black)
Since it's an American model, you could try 059R2L5 RM-820 AT&T DEVELOPER DEVICE BLK or 059R4W6 RM-820 GLOBAL BLACK SWAP and see if that fixes your issue.
Recovery failed
When I try both of those, I get:
0xFA001304: Platform ID check fails. Reason(s): The FFU file is not meant for this product. The platform ID of image does not match with platform ID of the device.
I don't think the \\BUILD phone is an american model.
Can someone please help. I'm getting desperate now. I flashed a Nougat build a little while ago but had some issues with Bluetooth and NFC so I flashed back to the original firmware using the dload folder and 3 button method. The installation seemed to go through fine but get's stuck booting at the vodafone logo. It then takes me into eRecovery where it attempts to download latest version over wifi but fails. I don't really know where to go from here because I can't access the internal sd card because the phone won't boot. I can access fastboot but don't really know what to do from there.
stevemacer10 said:
Can someone please help. I'm getting desperate now. I flashed a Nougat build a little while ago but had some issues with Bluetooth and NFC so I flashed back to the original firmware using the dload folder and 3 button method. The installation seemed to go through fine but get's stuck booting at the vodafone logo. It then takes me into eRecovery where it attempts to download latest version over wifi but fails. I don't really know where to go from here because I can't access the internal sd card because the phone won't boot. I can access fastboot but don't really know what to do from there.
Click to expand...
Click to collapse
Stevemacer10 Hello, I hope to be keen to help, because it happened to me the same thing, with two days of stomach ache for it. In wanting to load Android on my Nougat Huawei P9 Plus VIE-C02, with VIE-L09C605B354 and VIE-L29C185B320 I went into semi-brick or brick, or was only in bootloader, the screen with the green man to speak. No avail various ways, including via microSD-Fastboot or ADB to do restart your phone. Then, to my previous experience with a Huawei tablet, I logged on to the 'https://www.dc-unlocker.com/' site, and essend already registered, I bought 15 credits (15 Euros), for the 'option' DC Phoenix Firmware write ', valid for 72 hours, in addition to the program and downloaded the' DC program Phonix v29 '(https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial) following the related tutorial. Obviously procured the original firmware 'VIE-L09C02B133' or even lower versions, you'll have to unpack in a folder of your preference. Unfortunately, despite having used with DC Phoenix the original firmware was always also blocked me. At that point I wanted groped with a firmware that you can find on the same site of the DC-Unlocker (https://files.dc-unlocker.com/user.html?v=files/57694006a60d7) by downloading the firmware 'VIE_AL10B_M00A063_Factory_firmware_China_Nonspecific_Android_6.0_EMUI_4.1 .dgtks', which I loaded with DC-Phoenix on the phone. Rebooting of a minimal mode of andorid, I did not see well either. I went back into bootloader, as well as devone be made the previous steps that I have already described to you, and this time with DC-Phoenix I loaded on the phone firmware L09C02B128 and everything went well. Attention and keep in mind that just as I happened to me, the serial number of your phone is changed, to me has happened in '0123456789ABCDEF' and there was no way to change it, so as, while having the unlocked bootloader can not longer charge the TWRP recovery in order to then have root permissions. Until reading the paragraph '(Optional) Phone numbers REPAIR', I went to that point on the site 'http://hcu-client.com/'. Also here are sadly bought 8 credits (8,00 Euro) in order to work with the program 'HCU-Client v1.0.0.0115', you need to download and unpack, then follow the various instructions, which are not difficult when you have to be walked through the modding, otherwise you do even more damage. Let me know what you did and how it went to the method. I hope also good for you. In summary we want Euro 15 for Phoenix whose duration of operations applies to 72 hours and 8 Euro per HCU-Client, it can only use this for 24 hours.
P.S .: Obviously if you follow my instructions and all these signs you do so at your own risk, esonerandomi from every possible and accidental deterioration of the situation and the damage to your phone. Sorry for my English, whose translation has made Google translator.
---------- Post added at 12:59 AM ---------- Previous post was at 12:33 AM ----------
I wanted to say that the change of the serial number does not work well. The serial number has been changed from what I've shown you above, but was not put one I added that I had from the sales box. I write support and maybe let you know what they tell me. See you soon.
Hi Grlshia,
Thanks for getting back to me. It's such a minefield playing with all these different regional variants. I have though, managed to get it completely fixed. I just gave in and took it into the local Vodafone store and fortunately there happened to be one of the tech experts in there that owned a P9. He took it off me and within about 5 minutes he had completely restored it. He told me he just did a factory reset by holding down vol+ and power. I'm sure I had tried this myself to no avail previously but that's what he said he did.
stevemacer10 said:
Hi Grlshia,
Thanks for getting back to me. It's such a minefield playing with all these different regional variants. I have though, managed to get it completely fixed. I just gave in and took it into the local Vodafone store and fortunately there happened to be one of the tech experts in there that owned a P9. He took it off me and within about 5 minutes he had completely restored it. He told me he just did a factory reset by holding down vol+ and power. I'm sure I had tried this myself to no avail previously but that's what he said he did.
Click to expand...
Click to collapse
Stevemacer10 hello, I'm glad you've solved the problem. Unfortunately I'm still fighting because, for now I can only and even to load its firmware, but if you want to try to load the TWRP recovery for later obtain root permissions, it always fails. From what seems to understand me and certainly due to the fact that the bootloader unlock code now is different from what I have, because as I told you the serial number has changed and if I request a new unlock code, it stops notiziandomi the procedure that there is inconsistency between this number and the IMEI. For now I do not know what to do and how to proceed. I hope that over time can still solve my problem. A good evening to you :good:
i'v been throw it
after updating my p9 plus with a firmware that is not sutable to my area
my phone restarted and ask for an account wich ok but the problem was that the software not working properly and missing a keyboard.
and will not go to recovery mode to try another software.
this sloved by downloading a sutable correct software and unzip it into an SD card folder (i create) called dload, then swich off the device and turn it back on while holding three bottons (power+v up+v down) 10 to 15 sec. and the phone directly read from the SD card and start updating a new firmwarw.
try it.
it success with me , hope it work wth u
Dear All!
Here is one desperate guy turning to you because I see from some XDA posts, that you know about twrp and Huawei devices quite something.
At first, I don't want to waste your time. If you can help me, I will be happy to compensate it because I'm quite serious on this (and desperate as well).
I'm a beginner on Android rooting world, and in a nutshell, I enjoy just putting my Android device to the limits and enjoy using them to the fullest.
Bad thing, that I sometimes take too much risk and this time it ended with a (Soft) bricked phone.
The phone is from a rental company, that is why I'm so stressed to get it back and going.
So getting to the point:
Device: Huawei P10, VTR-L29C432B123
(C432, as I understand, is European version and it's important here)
Current state: Device is unlocked, rooted and with TWRP 3.1.1. (TWRP installed by this post https://forum.xda-developers.com/p10/development/testers-twrp-t3585256 and rooted by this post https://forum.xda-developers.com/p10/help/root-huawei-p10-p10-t3589946)
After installing TWRP and Rooting device I happily enjoyed using it for some time but
things went wrong when I started to try to put back Stock rom. (+ unroot and lock the device as well).
I tried multiple posts on the internet and didn't succeed. Unfortunately, FLashify and alike apps didn't work (or crashed after installing) on my P10, therefore, I turned to TWRP.
At first, I tried to install stock firmware downloaded from Firmware Finder but TWRP put out error:
E: unknown command [errno]
Updater process ended with ERROR: 9
Error installing zip '/external_sd/dload-draft/update.zip
Then I tried some other ways and turned to wipe section. Deleted Catches and data and then also system. This I believe f-ed things up and (of course) I could not boot anymore.
Can you instruct me on installing Stock rom for my device and get it back and running?
Thank you very much and please let me know if some more info is necessary!
@paratox @OldDroid @XePeleato @Dejan Kruljac Guys, if you could take a look on this and give me a direction - I would be enormously thankful!
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
What does it mean to debrand a device?
It helped. Jeezh
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
I'm shocked! Please take this as a complement but you are one sick mother****er. I can not believe how easy it was. It's like I pressed 'Enter' couple of times and that's it. Wow!
Man I owe you. How can I say thanks? How can I support work that you are doing? The way of how this tutorial was made make me want to be a better person and help others more. Huge thank you
Jaunpetrovics said:
I'm shocked! Please take this as a complement but you are one sick mother****er. I can not believe how easy it was. It's like I pressed 'Enter' couple of times and that's it. Wow!
Man I owe you. How can I say thanks? How can I support work that you are doing? The way of how this tutorial was made make me want to be a better person and help others more. Huge thank you
Click to expand...
Click to collapse
You are welcome, but actually you must thank @crucky and @mankindtw !
I recently got the P10 after two Sony devices and a Samsung, so it was confusing for me as well. I am happy it worked for you .
Debranding is installing a rom for another region, another carrier or a change from dual to single sim (or the other way around).
M1chiel said:
You are welcome, but actually you must thank @crucky and @mankindtw !
I recently got the P10 after two Sony devices and a Samsung, so it was confusing for me as well. I am happy it worked for you .
Debranding is installing a rom for another region, another carrier or a change from dual to single sim (or the other way around).
Click to expand...
Click to collapse
He's right. My P10 had no os installed no recovery and the huawei e recovery wasnt working, this thing will fix the most bricked of phones. 10/10 would brick again. :good:
Would my phone work ?
M1chiel said:
As you found out Huaweis work a little different. I used this to rebrand my P10: https://forum.xda-developers.com/showpost.php?p=72140996&postcount=10
I guess you can also use it to debrick your phone.
Click to expand...
Click to collapse
edit : I have relocked my bootloader which leaves me no TWRP
Would this also work for me (VTR-L09)
I bought the phone from Vodafone Australia and I am stuck in erecovery right now, when I try to update through the dload using a FAT32 sd card the update.app won't even copy onto the sd card as it is larger than 4GB. When I try to do it using an sd card formatted to NTFS it stops at 5% and states "software install failed!"
Please help me on what to do... any help would be appreciated
Huawei P20 lite dead
Guys please help me aswell
One day not long ago a did a hard reset on my Huawei P20 Lite to free up some space and delete junk files while the device was resetting without me even noticing i accidentilly held the power button and the device died.
But currently i'm getting the green screen with the red and blue blocks inside it.
The phone does not boot at all it only glich the green screen for about half a second when i press and hold the power button. I did the FASTBOOT&RESCUE MODE thing but dont know anything else and ow yes on fastboot mode it says PHONE LOCKED
PLEASE HELP ME
YulmarRSA said:
Guys please help me aswell
One day not long ago a did a hard reset on my Huawei P20 Lite to free up some space and delete junk files while the device was resetting without me even noticing i accidentilly held the power button and the device died.
But currently i'm getting the green screen with the red and blue blocks inside it.
The phone does not boot at all it only glich the green screen for about half a second when i press and hold the power button. I did the FASTBOOT&RESCUE MODE thing but dont know anything else and ow yes on fastboot mode it says PHONE LOCKED
PLEASE HELP ME
Click to expand...
Click to collapse
I can assume that your memory is out of order.
I understood correctly, when you turn on the cubes? You did not flash board firmware?
Hi all here is my dilemma concerning my personal DD, the phone was bought new in 2015-6 brand new and is currently on Android 7.0! The phone is in my opinion still very relevant and can be made even more so (if) I can update the whole firmware to the recent Note10 UI as seen elsewhere??
The trouble that I have experienced is trying to install TWRP via Odin? What happens, it recognises the file to be used, I set the parameters and start! It moves reasonable quickly then suddenly stops - No errors on the Pc/Odin page BUT the phone moves from the download mode in English to Chinese with Warning triangle and remains there until I reboot phone which starts up as normal??
I cannot get past this, and do Not know why the Change to Chinese that I do Not read or understand, so I have a few Pics but the 2 that I think are telling I will add if possible?
I found something in an overall search via the net, but this was the only one and this though Unclear in it self did Not assist me! Would I be correct in saying that this may be unique in that neither pictures or any where as this error arose hence why my possible struggles? Please can someone help in Solving this puzzle thank you.
Hello friends I'm new to this community so if anything wrong about posting i apologize in advance. I have a problem with my device Realme x2 pro , im not able to boot my phone into fastboot mode using realme in-depth test app.
What i see is when i tap on apply or start option inside the app , my phone reboots and the fastboot logo comes only for 1-2 sec and then vanishes , and my phone boots into system or android interface..
I need help with this (unlocking bootloader) as iam fed up with stock os that realme provides ..
RahulKumar_213 said:
Hello friends I'm new to this community so if anything wrong about posting i apologize in advance. I have a problem with my device Realme x2 pro , im not able to boot my phone into fastboot mode using realme in-depth test app.
What i see is when i tap on apply or start option inside the app , my phone reboots and the fastboot logo comes only for 1-2 sec and then vanishes , and my phone boots into system or android interface..
I need help with this (unlocking bootloader) as iam fed up with stock os that realme provides ..
Click to expand...
Click to collapse
Hello brother, as i know the only solution so far is to replace the motherboard, If you are still in the warranty period, hurry to the nearest RealmeCenter and blame the update, to get a free repair.
...
If you find a better solution you will be a hero to many people
edit: Some of us are stuck like you but without imei so no wifi/sim
a.saed said:
Hello brother, as i know the only solution so far is to replace the motherboard, If you are still in the warranty period, hurry to the nearest RealmeCenter and blame the update, to get a free repair.
...
If you find a better solution you will be a hero to many people
edit: Some of us are stuck like you but without imei so no wifi/sim
Click to expand...
Click to collapse
Me too, but i have imei, sim, wifi work ok
but i cant open fastboot mode