I downloaded odin and flashed the right TWRP kernel. After it was done with no signs of any problems, the phone started up and then got stuck to the boot screen. I couldn't get it to open to the TWRP menu by pressing the vol up + home + power buttons.
Kernel: https://www.mediafire.com/file/l5mig0jfwlb3ly1/GT-I8160-TWRP-Kernel.tar.md5/file
Oh ok i found the issue. That kernel only works on android gingerbread, not jellybean
Related
Hello everyone - I just tried to load a rom in the dev section (I have done this before many times). Rom ended up boot looping. I used ODIN 1.85 to load kk9 back onto the Note and after ODin reboot, the Note still bootlooops! Any other way to get a working kernel back onto the phone?
Solved! I had to pull battery, go into recovery with Vol Up + Power + Home Button then clear user data and cache. Rebooted just fine after that .
Hello!
Now my Galaxy S2 can't boot, it keeps stuck at the logo Samsung Galaxy SII and it can't go to Recovery Mode either when pressing Volume Up + Home + Power. By the way, it still can get into Download Mode
So I tried to flash offcial rom 4.0.3 but nothing happened, after that I tried to flash official rom 2.3.6 and the issue didn't resolve.
Pls help me to resolve this issue.
Many thanks!!!
kinos_fiolis said:
Hello!
Now my Galaxy S2 can't boot, it keeps stuck at the logo Samsung Galaxy SII and it can't go to Recovery Mode either when pressing Volume Up + Home + Power. By the way, it still can get into Download Mode
So I tried to flash offcial rom 4.0.3 but nothing happened, after that I tried to flash official rom 2.3.6 and the issue didn't resolve.
Pls help me to resolve this issue.
Many thanks!!!
Click to expand...
Click to collapse
look brother .. first of all this forum is for I9000 not I9100 , secondly you should download an official rom with three parts and flash it through odin with re-partition checked
Thanks bro!
I'm sorry for my mistake because I'm just a newbie in this amazing 4rum. Will try to never let it happens again.
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
hey Guys
Got a problem with my Galaxy note n7000
its rooted Ics with cwm installed
and i used rom toolbox to change the font and after a reboot it keeps getting stuck at the samsung logo
im triying to go into cwm using voldown + home + power and i go into download mode
but nothing happens
Any help with that issue ? or how to access cwm ?
thanks
Amer said:
hey Guys
Got a problem with my Galaxy note n7000
its rooted Ics with cwm installed
and i used rom toolbox to change the font and after a reboot it keeps getting stuck at the samsung logo
im triying to go into cwm using voldown + home + power and i go into download mode
but nothing happens
Any help with that issue ? or how to access cwm ?
thanks
Click to expand...
Click to collapse
Try to access recovery by pressing volume up + power + home button. Are you using a safe kernel?? if not try flashing a safe kernel before doing anything else. DO NOT WIPE anything on stock ICS.
glevitan said:
Try to access recovery by pressing volume up + power + home button. Are you using a safe kernel?? if not try flashing a safe kernel before doing anything else. DO NOT WIPE anything on stock ICS.
Click to expand...
Click to collapse
I used odin3 tool to flash the german ics release now everything is working
just got to reroot and install cwm again
thanks =)
Close Thread please / Problem Solved
Thread can be closed
Problem Solved
Hi
I just tried to flash v4.3b of the Hydracore Kernel from the v6 beta. It said it had installed successfully and I went to clear the cache but then my phone suddenly went off and now the phone won't boot. The Samsung Galaxy Note GT N7000 screen comes up but then nothing but the capacitive buttons illuminate when touched. I can't boot into CWM recovery (Power + Volume Down) nothing happens once the GTN7000 splash screen goes away. I can get the phone into the Samsung recovery and download mode
What can I do to get my phone working again?
what rom were u on?
Guessing you're on a cm based build?
Sent from my GT-N7000 using xda premium
you need to press power + home + vol UP for cwm
you need to press power + home + vol DOWN for download mode
start phone closed and release power key when you see galaxy note writing on the screen
kromosto said:
you need to press power + home + vol UP for cwm
you need to press power + home + vol DOWN for download mode
start phone closed and release power key when you see galaxy note writing on the screen
Click to expand...
Click to collapse
SpyderTracks said:
Guessing you're on a cm based build?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for that, didn't know about that combination. So used to rebooting into recovery while the phone is on.
B4you try take the battery out for 5min then do as he says. Bet you are on cm... though it is supposed to work . I've used it on dozens of roms ,no prob ,but wont touch cm. don't see the need for them anymore. Phones don't need stripped roms to go FAST anymore ...
I've had this. Like I say take batt out. Put in then hold vol up ,power ,home .when Samsung comes on you can let go ,or hold until cwm shows, it will. Hope you made a backup .when I flash a rom I flash v4at the same time ,no problems. Why use a beta and not the complete one ?
Sent from a secure institution......
573W1E said:
Thanks for that, didn't know about that combination. So used to rebooting into recovery while the phone is on.
Click to expand...
Click to collapse
if u were on a new JB rom then u need to back to the 6.2 beta hydracore or the kernel that came with the rom.. if its not booting flash the rom again. old hydracore doesnt work with the JB roms
nokiamodeln91 said:
if u were on a new JB rom then u need to back to the 6.2 beta hydracore or the kernel that came with the rom.. if its not booting flash the rom again. old hydracore doesnt work with the JB roms
Click to expand...
Click to collapse
Yeah, I reflashed the new v6 beta kernel and it booted right up. Thanks for all the help