Database Develop

Water Damaged ZR Recovery? - QPST Download Mode - Stuck

So, my friend recently bought a water damaged ZR online (don't ask me why, I don't know why would he either), and the issue seems to be severe.
The phone won't boot at all, there's nothing, when I plug it in, no charging animations, nothing comes up.
However we did notice one thing, we could still access the QPST when we plug it into a computer, and the app does recognize it.
The problem now is that I've never used QPST and tbh, I don't even know what exactly it's for.
It's the only thing we could access, the phone doesn't boot into bootloader mode either.
At this point, is the device still recoverable or a motherboard replacement is a must?
Thanks,

no flashtool? no fastboot?
the kernel won't boot up? then you never know what is going on!
so let's flash with qpst => www.youtube.com/watch?v=D-YmQ_8OVuY
after done if you get to kernel and could get to recovery you're the locky person, after that you can see the error massages from kernel or even better log it! or to see if things going up or not! you might need a new lcd as it might be broken because of the water damage (it's the first thing that damage after water damage).
hope you get successfully bring back the phone

sijav said:
no flashtool? no fastboot?
the kernel won't boot up? then you never know what is going on!
so let's flash with qpst => www.youtube.com/watch?v=D-YmQ_8OVuY
after done if you get to kernel and could get to recovery you're the locky person, after that you can see the error massages from kernel or even better log it! or to see if things going up or not! you might need a new lcd as it might be broken because of the water damage (it's the first thing that damage after water damage).
hope you get successfully bring back the phone
Click to expand...
Click to collapse
Alright, thanks, time to fire up my virtual machine.

sijav said:
no flashtool? no fastboot?
the kernel won't boot up? then you never know what is going on!
so let's flash with qpst => www.youtube.com/watch?v=D-YmQ_8OVuY
after done if you get to kernel and could get to recovery you're the locky person, after that you can see the error massages from kernel or even better log it! or to see if things going up or not! you might need a new lcd as it might be broken because of the water damage (it's the first thing that damage after water damage).
hope you get successfully bring back the phone
Click to expand...
Click to collapse
Ran into trouble already, it could only boot into Download Mode, thus I can't even get Service Programming working.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: After looking everywhere, I think I might need MPRG8064.hex and some other MBN files to get it working. I have no idea how to obtain the files, I mean no one has the files for ZR.
Perhaps anyone with a working ZR could try to dump them out for me?
EDIT2: Found them, but I can't get it to work properly, whenever I try in eMMC Download App and hit download, I just get Image Download Failed. Cookie not received.
I think it has something to do with the locked bootloader.
EDIT3: Nope, apparently I can't just grab some random hex and mbn files. I need a partition table in XML format, I need someone to make an XML for me with every partition laid out, anyone?

@341464 wow! it has more than 25 partitions! how can I do it just point me to a correct direction and I will do it for you

sijav said:
@341464 wow! it has more than 25 partitions! how can I do it just point me to a correct direction and I will do it for you
Click to expand...
Click to collapse
Tbh, I don't even know how to do this. Also I'm not sure whether the Hex and MBN files work, they're probably device specific.
There's this Chinese post mentioning how to dump these files, but I'm like extremely confused.
http://blog.csdn.net/benjaminwan/article/details/8854437
(I can read in Chinese, but Google Translate should work.)
EDIT: Apparently MBN files should have every partitions laid out, change the extension name to img and analyze it, we should be able to get an XML.
But I need someone to dump the MBN file first.
I very much doubt that this device can be recovered, due to the locked bootloader, LB might lock out the entire download mode from working.

341464 said:
Tbh, I don't even know how to do this. Also I'm not sure whether the Hex and MBN files work, they're probably device specific.
There's this Chinese post mentioning how to dump these files, but I'm like extremely confused.
http://blog.csdn.net/benjaminwan/article/details/8854437
(I can read in Chinese, but Google Translate should work.)
EDIT: Apparently MBN files should have every partitions laid out, change the extension name to img and analyze it, we should be able to get an XML.
But I need someone to dump the MBN file first.
I very much doubt that this device can be recovered, due to the locked bootloader, LB might lock out the entire download mode from working.
Click to expand...
Click to collapse
really? umm I thought lb is just for fastboot not download mode as everything can be flash in flashtool download mode! (which ofcourse needs cert .sin files to flash!)

sijav said:
really? umm I thought lb is just for fastboot not download mode as everything can be flash in flashtool download mode! (which ofcourse needs cert .sin files to flash!)
Click to expand...
Click to collapse
According to the posts there, when you try to utilize download mode you'll get an error if you have LB.

341464 said:
According to the posts there, when you try to utilize download mode you'll get an error if you have LB.
Click to expand...
Click to collapse
damn you're right! this device can't be flashable! it needs ub!
sry pal but if anything else you need and you think it can be fixed just ask!!

where i can download mpgr 8064 and patition layout. for zr, i have same problem with my zr

Nokia Icon (929) stuck at red Nokia screen can't flash

I was using the 10 preview, great stuff, but I had a problem with my LTE connection and that was more important so I decided to downgrade back to 8.1. I guess my first mistake was trusting microsft to do this properly, i used the windows phone recovery tool. It started the process then came up with a big FAILED message. Now i can't get past the red Nokia screen.
i've tried the lumia recovery tool, using the phone will not boot option, it detects the phone (some times) says that it's a Nokia Icon RM-927 downloads the correct firmware and then the phone immediatly reboots and the reocvery software says that the firmware is not for the device. "0xFA001304: Platform ID check fails. Reason(s): The FFU file is not meant for this product. The platform ID of image does not match with platform ID of the device."
over the last day in all the research and digging i have confirmed that the product code and subsequent downloaded firmware is correct, i've tried using the Phone support tool and got the same message, i've even tried command line using thor2.exe. thor2 had a bypass product code check but apparently that requires some sort of authentication?? i'm stuck i need this phone. it's not life or death but any help is appreciated
also holding down the power and volume down key at the same time does not make the phone vibrate.
I've come to the conclusion that I need to reflash what i'm guessing is the boot loader, but i can't find the hex or the bin file anywhere. apparently either there aren't a lot of icons out there or there aren't a lot of people bricking their icons.
if anyone has a working icon could they please get me the bin file i need?
RKH of SBL1: 24227AEE093862F0D3BF26A38C97CCEE7E9EF9351E0D507B1B4B606CE5769CD0
RKH of UEFI: 24227AEE093862F0D3BF26A38C97CCEE7E9EF9351E0D507B1B4B606CE5769CD0
thank you

Maybe this can help u : http://forum.xda-developers.com/windows-phone-8/development/help-programmer-unbrick-jtag-t3082592
Ops im sorry i think you have tried this already
Ping that OP maybe he can help you

unfortunately i have tried that. Problem is, his downloads as well as all the other possible downloads i have found include just about all devices except mine. There are a few posters in that thread that are also asking for the icon hex files I figured I'd start a new thread because I couldn't find one and I think the posts in that other thread are probably buried or glazed over by people who don't also have that issue.

bump. still looking for an answer

@tlman12, have you tried to download firmware for your handset with "NaviFirmPlus" and flash it by using Nokia care suite?
P.S. I don't have RM-927 but just checked NaviFirm - they have 3 versions of the bits for your Icon (3 for black and 3 for white, don't know what the difference).

sensboston said:
@tlman12, have you tried to download firmware for your handset with "NaviFirmPlus" and flash it by using Nokia care suite?
P.S. I don't have RM-927 but just checked NaviFirm - they have 3 versions of the bits for your Icon (3 for black and 3 for white, don't know what the difference).
Click to expand...
Click to collapse
I was gonna say yes I did but when I tried to dl the firmware I only had 2 options 1 for white and 1 for black. I double checked Microsoft's site and it was the current fw. I'm curious what the other 2 options for the colors were because maybe an older version would work? Maybe the broke the current version? How did you see 6 options?

@tlman12, six versions I meant, it was about older firmware. So NaviFirmPlus shows 3 versions for your handset, each version has 2 options: for black and white handsets.
I can recommend you to buy/donate NaviFirmPlus guys and try to flash older fw with Nokia tools (not MS). Sorry but that's all I can help you...

sensboston said:
@tlman12, six versions I meant, it was about older firmware. So NaviFirmPlus shows 3 versions for your handset, each version has 2 options: for black and white handsets.
I can recommend you to buy/donate NaviFirmPlus guys and try to flash older fw with Nokia tools (not MS). Sorry but that's all I can help you...
Click to expand...
Click to collapse
Yeah I did use navifirm to download it but I only saw 1 version per color. Do you have to pay for it to see older versions? Or did I do something wrong? I have no problem making the donation if it fixes my phone but I've gone about trying to obtain the fw every way I can think of. Problem is cause this was a Verizon exclusive there's not a whole lot of info out there for it in this respect

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sensboston said:
View attachment 3445936
Click to expand...
Click to collapse
I donated to NaviFirm and logged in, it is different, the free or canceled login version doesn't auto load the list on the left.
unfortunately none of the other version worked either, same message of invalid product ID.
No other ideas?

Manufacturer warranty service/exchange?

tlman12 said:
I donated to NaviFirm and logged in, it is different, the free or canceled login version doesn't auto load the list on the left.
unfortunately none of the other version worked either, same message of invalid product ID.
No other ideas?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2515453
contact this guy, he knws all about product codes and which files would be needed

sensboston said:
Manufacturer warranty service/exchange?
Click to expand...
Click to collapse
too far out of warranty, id have to pay out of pocket. It's just hard for me to justify paying exorbitant amounts to repair something I have the ability to do it myself. although at this point I think I just don't have the tools. I wish phone manufactures didn't lock down their phones so much. I mean we own the phone we should be able to do whatever we want with them right?

Bumping old post with new info, Turns out the reason I can't flash my device (Yes I'm still having problems gave up on it for a while) is because my platform ID was mangled at some point during the upgrade or down grade. It's currently Nokia.MSM8974..2.2 which is why I can't get any FFU files to flash to the device.
Is there any info on how to manipulate either the platform ID on the device or the platform ID the FFU is looking for? or how to bypass that check all together? I know there's a switch in thor2 but it says it requires authentication, is there a way to bypass that?

Pixel 4xl bricked itself

Hey all. My wifes phone decided to brick itself. Hers is/was an unlocked unit not purchased from verizon but on their network. I noticed its now locked. It randomly reset and on boot, the screen started blinking and was unresponsive. Then it rebooted again and the "try again, factory reset" note came up at the top of the screen. Try again yielded the same pattern. So, I tried full wipe, same thing, loop back to the try again screen. Then, I tried to side load the ota. All seemed ok. Installed her sim, all good. Went to settings to change to 3 button nav and boom, fail and try again screen. Was this a delay from maybe a bad sim card? Is 3 button nav an issue? Did evil verizon lock her phone? Can they do that?
So, I ordered another 4xl because she needs a solid phone to function for work. Id still like to know if I can recover the borked unit. Any help is appreciated.

You did all the correct things. Unfortunately it sounds like a hardware issue. Anytime you factory reset you have ruled out a software issue. Further, flashing a "rescue ota" via adb that resets the phone even with a locked bootloader. You've done everything you can do, except leave the red devil.

So now, I have it working, but not trusting it. I dont dare change to 3 button nav though...hahaha Still going to use the one we bought so she has a solid phone for work.
On another note. We're now stuck in the gmail recovery loop. 2 email addresses referencing eachother for recovery of passwords. Its maddening. I thought if I could get her phone to work, there would be some google magic that may kick in.
Its all evil.

sadly my 4xl has the same problem, it seems to be a serious bug from Google and needs to be fixed. Phone can't access Fastboot mode or Recovery mode, it can only stay in 9008 mode. This situation happened when I tried to update android 12 version but failed. Hope to have help from the developer, because there will be many people facing the same situation.

Hey all.
So for carbon coupe:
1. Verizon can't just lock your phone if it is unlocked, this is something that happens during the manufacturer process. So if it randomly restarted there may be another cause.
2. You wrote that when on 3 button navigation it works fine but if you switch the phone starts boot looping. This is clearly a software issue rather than a hardware issue(there is no chip responsible for the type of navigation system), so there may be a problem with the OS. This is a good thing because it means it's fixable without the need of money.
Factory reset usually fixes most problems but not all of them, as some partition aren't changed during the process, like boot or system.
So the problem is in one of those partition, just like when you have a locked phone and after reseting it it still knows it is lock.
The solution is to flash the firmware of the phone to fix it.
For sSjBlueVN197,
if you are on this mode it's called EDL mode. If you are on this mode it means fastboot and adb aren't available. On that mode you can flash firmware to the phone, even if it is locked or bricked.
This propose of this mode is to allow developers to flash firmware if when the system is damage, and some other partitions like boot and others are also damage. It's just like an emergency mode to rescue the phone.
Anyway, for both of you, here is what you need to fix your phone:
*Keep in mind this only works on windows, and I am assuming you have ADB and Fastboot command line installed, and you have some experience using the command line, and you are using a recent version of Windows10,*
1. Remove Lmobile drivers(from device manager on windows) and install the Google one's instead. If you don't know how to do it just search on google and you will find a tutorial
2. You need to download Qualcomm drivers and QPST tool. I will leave a link to a website where you can download it.
3. After Qualcomm drivers are installed, set up QPST.
3. On your phone, if you have access to adb, run without quotes "adb reboot EDL"(for carbon coupe)
If the phone can't reach adb there are other 2 methods, one using fastboot commands and other using the testing pins(requires phone disassembly)
As my phone is working and running fine android 12 I only know the adb command.
Once on EDL mode the screen is going to be completely black, and device manager will se your phone as :
QUALCOMM HS-USB QDLOADER 9008(COM "USB port number")​or something similar.
Now you can use the QPST tool to flash the firmware and boot image, or any other software that supports EDL mode.
Here is a link to a website which explains very well how to set up and use the QPST tool and where you can download all you need.
Hope this helps you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You are going to need also these files, that are the programmer files.
PLEASE KEEP IN MIND I DIN'T TRY OUT THIS FILES, SO THEY MAY BE FOR OTHER PHONE OR MAY NOT WORK.
So please use this files with caution, I found them on a post of XDA and they are in theory from a working Google Pixel 4XL, so they should work.
Though I didn't test them so they may just not work at all.

#mcl said:
You are going to need also these files, that are the programmer files.
PLEASE KEEP IN MIND I DIN'T TRY OUT THIS FILES, SO THEY MAY BE FOR OTHER PHONE OR MAY NOT WORK.
So please use this files with caution, I found them on a post of XDA and they are in theory from a working Google Pixel 4XL, so they should work.
Though I didn't test them so they may just not work at all.
Click to expand...
Click to collapse
hi, i have pixel 4 xl firehose but its asking for 2 more files raw program and patch file...
pixel4-XL_firehose - Google Drive
drive.google.com

#mcl , can you advices me the method that can fix this problem . so xml file can not meet this point .

Question My mobile phone suddenly stops working and can only enter 9008 mode

Anyone can take some time to help me extract the rawprogram.xml and patch0.xml of zenfone8. I need these two files to try to repair my mobile phone. At present, the official forum has been closed. I spent four days on Google and saw that many mobile phone users have this problem, I advise friends who want to buy zenfone8 to consider carefully. Thank you. I urgently need these two documents

davinlin said:
Anyone can take some time to help me extract the rawprogram.xml and patch0.xml of zenfone8. I need these two files to try to repair my mobile phone. At present, the official forum has been closed. I spent four days on Google and saw that many mobile phone users have this problem, I advise friends who want to buy zenfone8 to consider carefully. Thank you. I urgently need these two documents
Click to expand...
Click to collapse
Where are the files located?

Sebi673 said:
Where are the files located?
Click to expand...
Click to collapse
Hello, thank you for your attention and help, but I don't know what documents to provide. Can you be more detailed? I'm a novice, please understand

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Those can't just be extracted and you need the firehose file as well as a minimum (preferably a full EDL flash rom but if you have the 3 components, you can manually flash each partition. Unfortunately I haven't seen the EDL files for this device around..

Andrologic said:
Those can't just be extracted and you need the firehose file as well as a minimum (preferably a full EDL flash rom but if you have the 3 components, you can manually flash each partition. Unfortunately I haven't seen the EDL files for this device around..
Click to expand...
Click to collapse
Thank you for your reminder. Would you like to ask if it's a“ prog_ firehose_ Ddr.elf file”? In addition, I have a manually flash each partition

Andrologic said:
Those can't just be extracted and you need the firehose file as well as a minimum (preferably a full EDL flash rom but if you have the 3 components, you can manually flash each partition. Unfortunately I haven't seen the EDL files for this device around..
Click to expand...
Click to collapse
Are these two documents? If so, that's great. When I enter 9008, it always reminds me that I need rawprogram0.xml and patch0.xml files. Can you teach me how to do it and how to do it? Thank you very much!!!

Sebi673 said:
Where are the files located?
Click to expand...
Click to collapse
Dear sebi673：HI ! are these two files? Can you help me

davinlin said:
Dear sebi673：HI ! are these two files? Can you help me
Click to expand...
Click to collapse
Hi, if you're still covered by warranty, just send it in. The other option would be to flash the phone via EDL, which might not work at all. I didn't mess with that, I just sent It and they changed the motherboard within 3 days.

davinlin said:
Thank you for your reminder. Would you like to ask if it's a“ prog_ firehose_ Ddr.elf file”? In addition, I have a manually flash each partition
Click to expand...
Click to collapse
Correct. I've written a guide on this for the ASUS ROG 5 (linked below)- Follow Method 1. I'm not sure you can get access to flashing partitions without the Rawprog & patch XML's but you can try....
Repair your ASUS ROG Phone 5 with EDL mode
If your phone can only enter EDL mode (9008 mode) this firmware is glad to help you. It can be flashed in through the miflash tool. The firmware is made through the official package...
forum.xda-developers.com

davinlin said:
View attachment 5449999
Click to expand...
Click to collapse
There is nothing much you can do except sending to Asus service centre (most likely motherboard change).
I encountered the same issue last month and had my motherboard changed too - this is a common problem with this phone and many people are complaining.
See thread here

Sebi673 said:
Hi, if you're still covered by warranty, just send it in. The other option would be to flash the phone via EDL, which might not work at all. I didn't mess with that, I just sent It and they changed the motherboard within 3 days.
Click to expand...
Click to collapse
Hi, my mobile phone has only been used for two months and is still under warranty, but if I send it back for repair, it will generate tariff and freight, about $100, but it doesn't matter. I see many people have this problem on the Internet. I want to try to help you solve this problem, although I'm a rookie, ， I want to learn something with your help and finally solve it

Andrologic said:
Correct. I've written a guide on this for the ASUS ROG 5 (linked below)- Follow Method 1. I'm not sure you can get access to flashing partitions without the Rawprog & patch XML's but you can try....
Repair your ASUS ROG Phone 5 with EDL mode
If your phone can only enter EDL mode (9008 mode) this firmware is glad to help you. It can be flashed in through the miflash tool. The firmware is made through the official package...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi, thank you for your reply. I will try the method you provided. If it is successful, I will come back and share the method and results with you. Thank you again

napster79 said:
There is nothing much you can do except sending to Asus service centre (most likely motherboard change).
I encountered the same issue last month and had my motherboard changed too - this is a common problem with this phone and many people are complaining.
See thread here
Click to expand...
Click to collapse
Hi，Thank you for your advice and attention. This is the first time I use ASUS mobile phone, and probably the last time. If it takes me time to solve it, it can be regarded as my counterattack to ASUS. Why can't I admit that this is their problem? I can't understand. For such a large company, I read the history of ASUS mobile phone, which seems to be a common problem

Question OnePlus 10 Pro - QDLoader HS-USB - EDL Test Point [9008] MSM

Hello
The test point on this phone was shared by me for the first time on the internet. But there is no software available to install it. So my phone is still dead.
9008 usb Requirements to establish a connection:
- Disconnect the battery
- Plug your cable into the phone
- Connect the other end of the cable to the computer when short-circuiting the marked area.
- If the drivers are installed, the connection will be successful.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OnePlus 10 Pro EDL Test Point HS-USB QDLoader 9008
This guide will make you aware of the EDL Test Point on your OnePlus 10 Pro that could be used to boot your device to EDL Mode for unbrick.
www.droidwin.com

I found drivers on net. check if it may helpful.but it was described for OP9
QDLoader HS-USB Driver_64bit.exe | by Droidwin for Misc. Software & Hardware Resources
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com

Metromas said:
Hello
The test point on this phone was shared by me for the first time on the internet. But there is no software available to install it. So my phone is still dead.
9008 usb Requirements to establish a connection:
- Disconnect the battery
- Plug your cable into the phone
- Connect the other end of the cable to the computer when short-circuiting the marked area.
- If the drivers are installed, the connection will be successful.
View attachment 5649009
Click to expand...
Click to collapse
contct me i will fix your phone if software problem +992919474848 whatsapp only

mustafa.faiz said:
contct me i will fix your phone if software problem +992919474848 whatsapp only
Click to expand...
Click to collapse
How do you plan to solve it? Share it here. no msm tool available for gen 1 processor yet not available in the market. any box device is not working either.

Metromas said:
How do you plan to solve it? Share it here. no msm tool available for gen 1 processor yet not available in the market. any box device is not working either.
Click to expand...
Click to collapse
Post in thread 'MSM TOOLS' https://forum.xda-developers.com/t/msm-tools.4465229/post-87119213

Metromas said:
How do you plan to solve it? Share it here. no msm tool available for gen 1 processor yet not available in the market. any box device is not working either.
Click to expand...
Click to collapse
You are wrong. There are msm tool. You just cannot use it since you don't have a OnePlus login

g96818 said:
You are wrong. There are msm tool. You just cannot use it since you don't have a OnePlus login
Click to expand...
Click to collapse
Yes, the reason I can't revive my phone is because we can't log in.

Metromas said:
Yes, the reason I can't revive my phone is because we can't log in.
Click to expand...
Click to collapse
Can't log in is different than it is not available. It IS available, but you aren't allowed to use it.

g96818 said:
Can't log in is different than it is not available. It IS available, but you aren't allowed to use it.
Click to expand...
Click to collapse
I wonder when there will be a solution to this damn issue. I had to open a device that I never wanted to open..

This friend ran the software and recovered the phone but it does not give any information.
@rohit41u

Mod Edit: Quoted Post Deleted
You're referring to the MSM tool and a techs log in? If you're a OnePlus tech you're going to get fired, if you're not then what exactly are you selling??? It's a free tool, you've just keylogger stolen the details, nothing more.. trying to make money off people ?? That's shocking behaviour, genuinely awful..

{Mod Edit: Quoted Post Deleted}
Either way buddy, you can't sell usage of a free tool, certainly not promote it... You also made it sound like you were the one selling it as a "service"
Perhaps be more specific when you explain things...
To be clear, anybody selling the use of the MSM tool is a tool themselves.

So, there's only one guy who's selling the Msm login info it seems.
I wonder how oneplus would react if they found out. Wonder if an email over there would do anything about this fool.... But probably not.

Metromas said:
Hello
The test point on this phone was shared by me for the first time on the internet. But there is no software available to install it. So my phone is still dead.
9008 usb Requirements to establish a connection:
- Disconnect the battery
- Plug your cable into the phone
- Connect the other end of the cable to the computer when short-circuiting the marked area.
- If the drivers are installed, the connection will be successful.
View attachment 5649009
Click to expand...
Click to collapse
Hi, how did you figure out the test point? My Realme GT 2 PRO is dead bricked too, but i am not sure which are the correct test points:

Only the msm tool login will not do the trick. For the MSM Tool to work it need a file with the extension .ops, currently I could only find the .ofp file for oneplus 10 pro.
So I'm only wating for that to bring back my device.

ColorOS MSM tools always require internal account to log in. As OnePlus moves to ColorOS as its codebase since Android 12, free MSM tool (like with pure OxygenOS before) no longer exists I'm afraid.
I cannot find any free OxygenOS 12 MSM tool for any devices

nguyenlucky said:
ColorOS MSM tools always require internal account to log in. As OnePlus moves to ColorOS as its codebase since Android 12, free MSM tool (like with pure OxygenOS before) no longer exists I'm afraid.
I cannot find any free OxygenOS 12 MSM tool for any devices
Click to expand...
Click to collapse
And your won't make. They've locked that down.
Unless you run
a keylogger and take it!

dladz said:
And your won't make. They've locked that down.
Unless you run
a keylogger and take it!
Click to expand...
Click to collapse
I took a brief look into it over the weekend, some stuff is tied to the login like important setup files get streamed in to the tool. But it all looks like, if someone had a login, they could cache that info and crack it that way. Just needs the setup/flashing instructions from server basically. Would take longer to manually reverse their proprietary format.

Alright then, maybe we should look at this a different way. How would we be able to get a remote session with oneplus/ a technician?
Clearly it's possible as that one loser did it. It's just how he did it.

Ph0nysk1nk said:
Alright then, maybe we should look at this a different way. How would we be able to get a remote session with oneplus/ a technician?
Clearly it's possible as that one loser did it. It's just how he did it.
Click to expand...
Click to collapse
The easiest way used to be to reach out to support and tell them that your phone did an update and it won't boot into the system anymore. Then they would set up a remote session to flash your phone. The more difficult part at that point was you needed to set up a keylogger on your computer and run it when they do it and then disconnect before they can delete the files. If you feel comfortable doing that, then no problem. I wouldn't want to set up a keylogger on my own computer, so would have to either run a VM that I can actually get into EDL with or a clean set up just for that purpose. Either way, it's possible and hopefully someone is able to do it. The good part is we have the MSM for each device already, just need to crack it so we can freely use it as needed.