Nokia Icon (929) stuck at red Nokia screen can't flash - Windows Phone 8 Q&A, Help & Troubleshooting

I was using the 10 preview, great stuff, but I had a problem with my LTE connection and that was more important so I decided to downgrade back to 8.1. I guess my first mistake was trusting microsft to do this properly, i used the windows phone recovery tool. It started the process then came up with a big FAILED message. Now i can't get past the red Nokia screen.
i've tried the lumia recovery tool, using the phone will not boot option, it detects the phone (some times) says that it's a Nokia Icon RM-927 downloads the correct firmware and then the phone immediatly reboots and the reocvery software says that the firmware is not for the device. "0xFA001304: Platform ID check fails. Reason(s): The FFU file is not meant for this product. The platform ID of image does not match with platform ID of the device."
over the last day in all the research and digging i have confirmed that the product code and subsequent downloaded firmware is correct, i've tried using the Phone support tool and got the same message, i've even tried command line using thor2.exe. thor2 had a bypass product code check but apparently that requires some sort of authentication?? i'm stuck i need this phone. it's not life or death but any help is appreciated
also holding down the power and volume down key at the same time does not make the phone vibrate.
I've come to the conclusion that I need to reflash what i'm guessing is the boot loader, but i can't find the hex or the bin file anywhere. apparently either there aren't a lot of icons out there or there aren't a lot of people bricking their icons.
if anyone has a working icon could they please get me the bin file i need?
RKH of SBL1: 24227AEE093862F0D3BF26A38C97CCEE7E9EF9351E0D507B1B4B606CE5769CD0
RKH of UEFI: 24227AEE093862F0D3BF26A38C97CCEE7E9EF9351E0D507B1B4B606CE5769CD0
thank you

Maybe this can help u : http://forum.xda-developers.com/windows-phone-8/development/help-programmer-unbrick-jtag-t3082592
Ops im sorry i think you have tried this already
Ping that OP maybe he can help you

unfortunately i have tried that. Problem is, his downloads as well as all the other possible downloads i have found include just about all devices except mine. There are a few posters in that thread that are also asking for the icon hex files I figured I'd start a new thread because I couldn't find one and I think the posts in that other thread are probably buried or glazed over by people who don't also have that issue.

bump. still looking for an answer

@tlman12, have you tried to download firmware for your handset with "NaviFirmPlus" and flash it by using Nokia care suite?
P.S. I don't have RM-927 but just checked NaviFirm - they have 3 versions of the bits for your Icon (3 for black and 3 for white, don't know what the difference).

sensboston said:
@tlman12, have you tried to download firmware for your handset with "NaviFirmPlus" and flash it by using Nokia care suite?
P.S. I don't have RM-927 but just checked NaviFirm - they have 3 versions of the bits for your Icon (3 for black and 3 for white, don't know what the difference).
Click to expand...
Click to collapse
I was gonna say yes I did but when I tried to dl the firmware I only had 2 options 1 for white and 1 for black. I double checked Microsoft's site and it was the current fw. I'm curious what the other 2 options for the colors were because maybe an older version would work? Maybe the broke the current version? How did you see 6 options?

@tlman12, six versions I meant, it was about older firmware. So NaviFirmPlus shows 3 versions for your handset, each version has 2 options: for black and white handsets.
I can recommend you to buy/donate NaviFirmPlus guys and try to flash older fw with Nokia tools (not MS). Sorry but that's all I can help you...

sensboston said:
@tlman12, six versions I meant, it was about older firmware. So NaviFirmPlus shows 3 versions for your handset, each version has 2 options: for black and white handsets.
I can recommend you to buy/donate NaviFirmPlus guys and try to flash older fw with Nokia tools (not MS). Sorry but that's all I can help you...
Click to expand...
Click to collapse
Yeah I did use navifirm to download it but I only saw 1 version per color. Do you have to pay for it to see older versions? Or did I do something wrong? I have no problem making the donation if it fixes my phone but I've gone about trying to obtain the fw every way I can think of. Problem is cause this was a Verizon exclusive there's not a whole lot of info out there for it in this respect

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

sensboston said:
View attachment 3445936
Click to expand...
Click to collapse
I donated to NaviFirm and logged in, it is different, the free or canceled login version doesn't auto load the list on the left.
unfortunately none of the other version worked either, same message of invalid product ID.
No other ideas?

Manufacturer warranty service/exchange?

tlman12 said:
I donated to NaviFirm and logged in, it is different, the free or canceled login version doesn't auto load the list on the left.
unfortunately none of the other version worked either, same message of invalid product ID.
No other ideas?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2515453
contact this guy, he knws all about product codes and which files would be needed

sensboston said:
Manufacturer warranty service/exchange?
Click to expand...
Click to collapse
too far out of warranty, id have to pay out of pocket. It's just hard for me to justify paying exorbitant amounts to repair something I have the ability to do it myself. although at this point I think I just don't have the tools. I wish phone manufactures didn't lock down their phones so much. I mean we own the phone we should be able to do whatever we want with them right?

Bumping old post with new info, Turns out the reason I can't flash my device (Yes I'm still having problems gave up on it for a while) is because my platform ID was mangled at some point during the upgrade or down grade. It's currently Nokia.MSM8974..2.2 which is why I can't get any FFU files to flash to the device.
Is there any info on how to manipulate either the platform ID on the device or the platform ID the FFU is looking for? or how to bypass that check all together? I know there's a switch in thor2 but it says it requires authentication, is there a way to bypass that?

Related

deploy xap issues

hey guys, ive a lumia 625 and ive developer unlocked it, ive been searching the web all day on how to deploy xaps, ive been to site after site and they all reccomend different apps to do this, i've literally tried them all and i keep coming to one of 2 problems.
1- i cannot target/choose my fone to deploy too
2- i get a microsoft error (this only happens wif the offical deployer from the sdk.
just wondering if anyone has come accross this issue before and if there is a way to make any of the apps reconginse my phone?
Could you be a little more vague about that error? I mean, you told us it pertained in some way to the company that made the software. That's clearly way too much info... </snark>
If you were able to dev-unlock your phone (presumably using the Developer Registration tool from the SDK), you are able to deploy apps (using the Application Deployment tool from the SDK). They connect the same way. If you get some error when doing so, tell us what the error is. Also, try obvious and simple fixes like restarting the PC and/or phone, making sure the phone is connected correctly (i.e. you can browse it via MTP, it's charging, etc.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yeah my phone is developer unlocked, above is the error i get from the Application Deployer from the SDK instalation, and yes i can still browse my files and charge my phone, its just this error happens when i opened the program.
above is 2 images in one, the first is the error i get when opening xap deployer 2.0, the 2nd half with the black circle shows there is no target avaiable.
Have you tried rebooting both systems? The other things you might try are removing the WP8 drivers (which may also require a reboot before they work again) from Device Manager, and using a different USB port.
GoodDayToDie said:
Have you tried rebooting both systems? The other things you might try are removing the WP8 drivers (which may also require a reboot before they work again) from Device Manager, and using a different USB port.
Click to expand...
Click to collapse
i have rebooted both systems, i haven't tried removing drivers or a different port, I'll try those tomorrow and hopefully one will work
Good luck. This is an error I haven't seen before. You may also want to search around more online in case anybody else knows anything. The only times I've seen comparable problems, the phone wasn't really connecting at all (not visible to the registration tool or MTP clients).
Thanks.
tbh id an issue wif one usb port not reading my fone, but the one I've been using since i got the fone installed has always worked for copying files and stuff.
hey ive tried what youve suggested but im still getting the same errors, is there another app you know of that may work? ive searched the web and the only other person who seems to have come accross this error said he updated his visual studio to update 3, i just downloaded the most up to date version of visual studio yesterday so i dont think it would be that?
All the apps work the same way, they just wrap the same functionality of the official app in a more user-friendly package (the official tool is pretty bare-bones). Some of them have better error handling (telling you useful information) than others, but if they just do not *work* then you're probably SOL... is there another computer you can try using, to see if it's a problem with the phone instead of the SDK tools? Also, are you sure you purged all the phone drivers? Un-installing the SDK and purging all the drivers, then rebooting the PC and starting from scratch, *might* work. It'll take time but I don't know what else to recommend right now except trying on another PC or trying with another phone.
I did a fresh install if windows 8 and that's sorted the problem, not sure wat was wrong, but thanks for the help guys.
Syraphin said:
hey guys, ive a lumia 625 and ive developer unlocked it, ive been searching the web all day on how to deploy xaps, ive been to site after site and they all reccomend different apps to do this, i've literally tried them all and i keep coming to one of 2 problems.
1- i cannot target/choose my fone to deploy too
2- i get a microsoft error (this only happens wif the offical deployer from the sdk.
just wondering if anyone has come accross this issue before and if there is a way to make any of the apps reconginse my phone?
Click to expand...
Click to collapse
I am facing the same don't know y help pls!!
kk18 said:
I am facing the same don't know y help pls!!
Click to expand...
Click to collapse
hey, are u trying the trick for 32 bit? That's wat didn't work for me, i had to reformat to 64 bit and then id no problems.
]
same error I get
kk18 said:
]
same error I get
Click to expand...
Click to collapse
I have gotten this error when installing the WP8 SDK on Windows 7 64 bit. Try applying any WP SDK updates starting with 7.1.1. I think the 7.8 update is the one that fixed it for me...
I have a wp8 and windows 8 64bit and I have tried several ways I don't get the target option in deployer!!pls help!!!
I had that same problem multiple times, always when the internet connectino went offline and the installer couldn't finish. I had to completely uninstall the SDK and install it again, you have to let it download the emulator images aswell. Good luck!

[Q] Samsung ATIV S - WP8 SMD binary not working

Hi,
I cannot use the WP8 SMD binary USB Downloader with my Samsung ATIV S to flash a rom.
I specify the wp8 and csc file, SMD detects my phone, the start button is enabled, but when i press Start nothing seems to happens (t.e the channel don't seem to open).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What i have checked is:
1) Try flashing on computers running from Windows XP to Windows 8.1, both 32 and 64 bit versions of the OS
2) All sorts of usb cables, including the ones that i received with my phone
3) As drivers, I'm using the Samsung ones "SamsungUSBDriver", but also tried the Windows provided and from the Zune Software.
4) Tried every version of the SMD Binary that i managed to find on the net
One thing that i have noticed is that the samsung driver inf file (WP8USBDownloader.inf) is using the signature:
USB\Vid_045E&PID_062B
But when i go to the Device Manager (when my phone is in download mode) the usb signature is:
USB\VID_045E&PID_062A
But nevertheless the driver is getting installed and I'm not sure if this is preventing the flash process to begin
Anyone has experienced an issues like this?
atanastrpceski said:
Hi,
I cannot use the WP8 SMD binary USB Downloader with my Samsung ATIV S to flash a rom.
I specify the wp8 and csc file, SMD detects my phone, the start button is enabled, but when i press Start nothing seems to happens (t.e the channel don't seem to open).
View attachment 2692098
What i have checked is:
1) Try flashing on computers running from Windows XP to Windows 8.1, both 32 and 64 bit versions of the OS
2) All sorts of usb cables, including the ones that i received with my phone
3) As drivers, I'm using the Samsung ones "SamsungUSBDriver", but also tried the Windows provided and from the Zune Software.
4) Tried every version of the SMD Binary that i managed to find on the net
One thing that i have noticed is that the samsung driver inf file (WP8USBDownloader.inf) is using the signature:
USB\Vid_045E&PID_062B
But when i go to the Device Manager (when my phone is in download mode) the usb signature is:
USB\VID_045E&PID_062A
But nevertheless the driver is getting installed and I'm not sure if this is preventing the flash process to begin
Anyone has experienced an issues like this?
Click to expand...
Click to collapse
The only advice I can give you is to try the newer versione of wP8SMD, the 3.47.. you can download it from the net
gidannifico said:
The only advice I can give you is to try the newer versione of wP8SMD, the 3.47.. you can download it from the net
Click to expand...
Click to collapse
Tried that version as well ..
I have exactly the same problem, did you succeed in resolving it maybe?
when i look at the picture the phone is an engineering phone , and you try to flash a retail rom , that will not work.
So do you mean that it's impossible to flash? where I can find engineers roms and csc?
with smd version 3.47, phone is not detected, with the others is detected as "UnKnown Engineer" I just want to change CSC
DJBlaster-303 said:
So do you mean that it's impossible to flash? where I can find engineers roms and csc?
with smd version 3.47, phone is not detected, with the others is detected as "UnKnown Engineer" I just want to change CSC
Click to expand...
Click to collapse
It can be flashed with MBN Creator, IMHO. But I can't predict the result.
-W_O_L_F- said:
It can be flashed with MBN Creator, IMHO. But I can't predict the result.
Click to expand...
Click to collapse
I guessed to try with your creation but bad luck is on me, my ativ has been stolen, bought a used one off ebay and it's a branded version with a lot of csc except ITV, and when I try MBN creator
It makes me sad every time somebody takes an engineering phone and tries to turn it into a retail one. They are so much more useful when they're all unlocked (the way engineering phones generally are).
DJBlaster-303 said:
I guessed to try with your creation but bad luck is on me, my ativ has been stolen, bought a used one off ebay and it's a branded version with a lot of csc except ITV, and when I try MBN creator
Click to expand...
Click to collapse
Do you have latest NET Framework installed?
GoodDayToDie said:
It makes me sad every time somebody takes an engineering phone and tries to turn it into a retail one. They are so much more useful when they're all unlocked (the way engineering phones generally are).
Click to expand...
Click to collapse
Flashing CSC will not lock this phone.
IMHO, phones with Mass Storage are way more usefull

Firmware: EVA-L09-hw-eu-V001 (???)

Good evening folks!
I've been lurking around in this amazing forum for some time now, but now i need a little bit of help.. I have searched my ass off in here and out there in google city, but can't find squat!
So...
I have this Huawei P9 that used to be EVA-L09C432B182 until yesterday when i tried to update/upgrade to C432B360 dload style. It went great i thought, 100% and succeed message. Then it rebooted to eRecovery...
I tried to update the HW_EU the same way - 99% Fail message.
I've tried update via Huawei updater as you can see in the picture below. I also tried unbrick/refurbish via Huawei updater but all that happened on Hisuite you can also see in the picture. The circle of nothing kept going for hours.
What my EVA can do? Enter eRecovery (which helps me nothing), fastboot/rescue mode (Huawei updater kinda recognizes my device, Hisuite does not.) and force update three button method (Here i get a message when trying to flash anything from ext. sd card: "Not compatible with this version, download the right software". Or something to that matter.)
If you take a look at the picture i've tried to embed below, you'll see that Huawei updater recognizes my phone as
Hardware: EVA-L09
Firmware: EVA-L09-hw-eu-V001 (Never seen or heard of!)
C- version: C000
D- version: D000
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My question is; What can i do with this?
I'm not rooted.
[/COLOR]Phone locked.
FRP Unlock
Windows recognize as: HI3650, Huawei Android Interface.
I'll appreciate all and any links, downloads, guides, tools.. Ideas you might have!
Squirrel.
Norway
try to do "systemgjenoppretting" what happens then ?
ofcorse, swich in hisuite to "no proxy'
I have the same problem mate , i don't know what can i do . Did you try to wipe cache etc?
Arnys said:
try to do "systemgjenoppretting" what happens then ?
ofcorse, swich in hisuite to "no proxy'
Click to expand...
Click to collapse
Hisuite answers with "your device is not supported, contact local service..."
pindlosz1 said:
I have the same problem mate , i don't know what can i do . Did you try to wipe cache etc?
Click to expand...
Click to collapse
Yeah, i tried. Wipe cache - Fail. Factory reset - Fail.
Something actually happening after trying custom rom method on Huawei updater with hisuit IP/Port set manually .
Lets hope it lasts!
It helped you?
pindlosz1 said:
It helped you?
Click to expand...
Click to collapse
Don't know yet, it's going reeealy slow. I'll keep you posted!
It was going so great...
And then not so much..
I was stuck in a similar sort of place, I used a program called DC Phoenix, which I found in these forums. You have to pay a fee of 15 euros which gives you access to force flash a rom. It worked perfectly on mine after I had exhausted other options. Its part of dc unlocker. Hope that helps
Natchi said:
I was stuck in a similar sort of place, I used a program called DC Phoenix, which I found in these forums. You have to pay a fee of 15 euros which gives you access to force flash a rom. It worked perfectly on mine after I had exhausted other options. Its part of dc unlocker. Hope that helps
Click to expand...
Click to collapse
Hey!
Do you know if this Is a guaranteed succeed solution? I'll look into it. Definitely worth the 15Euros if it actually works magic!
Thanks.
Theres a forum thread somewhere on here, I cant find it at the minute, but there were numerous good reviews
Tried using SRK and update extractor. See pic.
Anyone know what i can do with this "command not allowed"?
No time for school, work or family with this **** going on..!
Natchi said:
I was stuck in a similar sort of place, I used a program called DC Phoenix, which I found in these forums. You have to pay a fee of 15 euros which gives you access to force flash a rom. It worked perfectly on mine after I had exhausted other options. Its part of dc unlocker. Hope that helps
Click to expand...
Click to collapse
I did this too , phone starts normally and it's full working but i have to write NCK code (simlock ?) . How can i repair this ?
I would try and flash a full rom using the dload method just to make sure. I flashed B136 after I reset mine to take it back to original and let it updat to b166 ota
Phoenix woke my phone up again! Thanks!! Now I'm on Nrd90m though, hoping to bring back stock.
Help
Look_Squirrel said:
Phoenix woke my phone up again! Thanks!! Now I'm on Nrd90m though, hoping to bring back stock.
Click to expand...
Click to collapse
I had the same problem, what did you do to fix it?
I downloaded DC phoenix from DC unlocker page. Bought 15 credits ≈ 15 euro
Downloaded full b361 for EVA-L09. Then followed instructions given by the program. I can explain better when I'm on my laptop if needed?
Still have no built-in camera, no BT, no NFC and no built-in flashlight..

[Unlock.io] Not able to receive OTA-Updates after Sim-Unlock

Hello, i'm not an expert, i just wanted to unlock my new s10, like i did on my old devices i just used Unlock.io for that.
i followed the instructions here
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and now it looks like i am not able to receive OTA Updates.
It says "Your current software version isn't supported. Visit a service centre"
I dont want to loose my warranty or Knox functionality, i just wanted to get my phone unlocked.
Can anyone help me out here what i should do now? The Phone is from the Provider "A1" (Austria)
Here a Picture of the Device with the Error Message and Software Version
What version of phone do you have 973U? What carrier do you have?
highaltitude said:
What version of phone do you have 973U? What carrier do you have?
Click to expand...
Click to collapse
G973F
A1 Austria
Proxolin said:
Hello, i'm not an expert, i just wanted to unlock my new s10, like i did on my old devices i just used Unlock.io for that.
i followed the instructions here
and now it looks like i am not able to receive OTA Updates.
It says "Your current software version isn't supported. Visit a service centre"
I dont want to loose my warranty or Knox functionality, i just wanted to get my phone unlocked.
Can anyone help me out here what i should do now? The Phone is from the Provider "A1" (Austria)
Click to expand...
Click to collapse
There's another similar post that you may find helpful.also might be try asking unlock io and see what they say. Let us know.
https://www.reddit.com/r/galaxys10/...date/?utm_medium=android_app&utm_source=share
Sent from my SM-G975U using Tapatalk
Proxolin said:
Hello, i'm not an expert, i just wanted to unlock my new s10, like i did on my old devices i just used Unlock.io for that.
i followed the instructions here
and now it looks like i am not able to receive OTA Updates.
It says "Your current software version isn't supported. Visit a service centre"
I dont want to loose my warranty or Knox functionality, i just wanted to get my phone unlocked.
Can anyone help me out here what i should do now? The Phone is from the Provider "A1" (Austria)
Click to expand...
Click to collapse
Once unlocked its permanent. Back up phone and do hard reset. Use the key combo not the option from Setting menu. If that doesn't solve it then use Emergency software repair ( Samsung Switch) on PC .
i already tried a hard reset, did not solve the problem.
i will try smart switch and let you know
Rexton270 said:
Once unlocked its permanent. Back up phone and do hard reset. Use the key combo not the option from Setting menu. If that doesn't solve it then use Emergency software repair ( Samsung Switch) on PC .
Click to expand...
Click to collapse
ok i tried to use samsung switch, first of all the tab "Device Initialization" is missing in the latest version of this software, i tried to use an older version, here the tab Device Initialization still was here but when i type in my Model Number and SrNumber it Says:
"SM-G973F" does not support Initializing. Please contact a Service Centre
do i have to use ODIN now??
i guess i just will wait until a new update will come out and try to update with Smart Switch
Proxolin said:
ok i tried to use samsung switch, first of all the tab "Device Initialization" is missing in the latest version of this software, i tried to use an older version, here the tab Device Initialization still was here but when i type in my Model Number and SrNumber it Says:
"SM-G973F" does not support Initializing. Please contact a Service Centre
do i have to use ODIN now??
i guess i just will wait until a new update will come out and try to update with Smart Switch
Click to expand...
Click to collapse
You can reflash the fw with Odin. Flash the version you had before the "unlock ". I think they are messing with some version of firmware...
Rexton270 said:
You can reflash the fw with Odin. Flash the version you had before the "unlock ". I think they are messing with some version of firmware...
Click to expand...
Click to collapse
Very close.
Bare with me as it's been a moment since I've worked with these tools:
Most 'instant' unlocks, done via USB over TCP/IP, tend to alter one of the device's primary certificates to allow for an 'instant unlock'.
If, and when, one of these certificates is replaced, it alters the chain of trust required by the device.
So when the device goes looking for an update, the update server acknowledges the request but sends back a query. In this query, and depending on the model, the update server looking for several variables and these must ALL match. Seeing as one of the primary certificates has changed, the result expected by the server isn't matched and, as such, it doesn't allow for an update.
@Rexton270 is correct in that you should replace the firmware with the same (and failing that, a newer version if possible). AFTER you flashed the new update, follow these steps:
https://www.verizonwireless.com/support/knowledge-base-222931/
(I know you don't have a Verizon device but the steps are the same)
Please keep us posted.
AHE_XDA said:
Very close.
Bare with me as it's been a moment since I've worked with these tools:
Most 'instant' unlocks, done via USB over TCP/IP, tend to alter one of the device's primary certificates to allow for an 'instant unlock'.
If, and when, one of these certificates is replaced, it alters the chain of trust required by the device.
So when the device goes looking for an update, the update server acknowledges the request but sends back a query. In this query, and depending on the model, the update server looking for several variables and these must ALL match. Seeing as one of the primary certificates has changed, the result expected by the server isn't matched and, as such, it doesn't allow for an update.
@Rexton270 is correct in that you should replace the firmware with the same (and failing that, a newer version if possible). AFTER you flashed the new update, follow these steps:
https://www.verizonwireless.com/support/knowledge-base-222931/
(I know you don't have a Verizon device but the steps are the same)
Please keep us posted.
Click to expand...
Click to collapse
thank you for that explanation.
i will first try to update the phone with smart switch as soon as there is a newer version for my phone, atm it says im up to date (i hope that is true) maybe it solves itself when i start an update with smart switch, if not i will follow your steps
thank you very much.
because there was still no update in samsung smart switch i flashed it with odin.
problem solved.
thank you.
for other users: if you want to unlock your phone, use the samsung database instead of the cheaper version.....
Excellent news. Glad to hear it all worked out.

General Journal: A brand new OPPO Find X3 Pro (UK/EE) - From new to clean de-bloated android (hopefully)

To start this journal I will begin by stating, I am not actually sure if it will be possible to finish this journal; from what I have read there can be quite a number of obstacles with international versions of the OPPO, some of which can be quite troublesome, but I thought it would be an interesting and hopefully helpful (for my self and anyone else wanting to do the same) way of going through the process with such a modern device.
The device arrives tomorrow, I wanted to get the initial post in without knowing precise details about the device.
I will update this primary post with the journal entries and post into the main thread when I update it going forwards
-- Entry 1 29/01/2022 00:21 (Dellivery today at some point!)
So far I have found out that cpw means car phone warehouse, which used(still is?) a store in the uk, 'EE' a network provider in the UK releases of the Oppo x3 find pro are apparently identical to releases from this store.
I have asked the user who informed me of this if they could possible put any information they are aware of within this thread.
Also, I will be doing the unboxing and initial looking at what it is via youtube I hope this is ok? I could not see a way to embed video onto this platform!
-- Entry 2 29/01/2022 10:53 (Delivery)
This is just a few images of the arrived device, simply unboxed and put on charge nothing has been set on the device what so ever.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also note that this image showing the build number is by @alvydas it is not from my device yet! just some more information to add to the journal, this is believed to be the same as mine should show later on when I decide to video/start the phone up
Also for note the CPH (Possible related to CarPhoneWarehouse) prefix in the build number)
-- Entry 3 29/01/2022 13:11 (Turning on, Bootloader unlock, USB Debugging enabled)
Youtube video:
- May still be processing the HD version in google HQ!
-- Entry 4 30/01/2022 10:53 (Getting sorted)
Ok so we can't root it and we can't change the boot laoder .... however we can get novo launcher to start by default! The pro version at least!
Not exactly an amazing feat but hey its progress, I also removed the gmail mail application as I preffer outlook (mainly because I have 3 email accounts):
And boy .... you can really remove everything including:
130|OP4F57L1:/ $ pm uninstall --user 0 com.oppo.launcher
The coloros launcher its self X_X, so it seems you cannot get root, but there is no protected package, you can remove ANYTHING.
so this bodes the question .... other than wanting lineage OS of course, how thin can we get it ....
-- Entry 3 10/02/2022 10:53 (Hackery and cleaning)
.... So there is no fastboot on the international model, it is simply not there I even got EE them self to confirm this.
However, I have made some progress in discovering a way to get to the qualcomm flashable download mode, that is it will show up as a:
One of those (if you have the Qualcomm drivers installed), some information I put in the forum about this mode was this:
1) Turn the phone off (shutdown)
2) Hold the power button and the Vol up/down (I Forget which) down all the way through the phone starting, you will feel a little Bzzzzz
3) you will be presented with a menu probably in chinese, this is because you held down the power button and it auto selected the first language (its not a biggie), just press the back touch screen button in the top left <--
4) Select english (or chinese if you preffer!)
5) you will be presented with a menu that has 3 options, Format, Reboot, .... something else ...
6) Select none of the options! look to the bottom of the screen you will see a version mine was v12 o3 v1.2 - double tap this
7) you will get a warning you are entering 'customer service mode', and wallah .... you will get the device show up in device manager.
I was going to shoot a video of this, I still might! but its rather redundant at this point as I am now at a brick wall, I need to figure out how to deal with this mode, can I flash something to it .... how?
I am scrubbing the phone of all the bloatware I can and to be honest I have it pretty damn clean .... but still the fastmode is elusive and what else could be loaded onto this lovely phone.
Entry 1 added - nothing really important
Entry 2 added, initial unboxing simply for charging, video to come soon: looking for details!
The CPW in the build number is more of a guess than anything else we all could be wrong
alvydasd2 said:
The CPW in the build number is more of a guess than anything else we all could be wrong
Click to expand...
Click to collapse
@alvydasd2 Soon see! I hope you do not mind but I included your image in the journal at the top.
PaulGWebster said:
@alvydasd2 Soon see! I hope you do not mind but I included your image in the journal at the top.
Click to expand...
Click to collapse
Yh that's fine
Entry 3 uploaded, many thanks @alvydasd2 We do have slightly different builds it seems!
So now next up I believe its rooting the phone should be fun, also I beleive there is a way to root a phone but hide it from applications like paypal ... would love to find more out on this
Also have to figure out if all the fancy camera things will work with a custom rom, such as the microscope mode and all the advanced functionalities
Maybe the best initial tangent is to simply root the phone and remove any bloatware as well as installing novolauncher, followed by re-rooting it
That way I will not lose the ability to use the special camera functions and in turn still receive updates, I believe I can actually freeze certain packages too so they are effectively immutable, so they show up but can never run or be changed ... hmmm
PaulGWebster said:
So now next up I believe its rooting the phone should be fun, also I beleive there is a way to root a phone but hide it from applications like paypal ... would love to find more out on this
Click to expand...
Click to collapse
Rooting ain't gonna be easy on this phone that's if you can unlock the bootloader which is pretty much impossible unless you have a Chinese variant of the phone or somehow figure out a way to root it without unlocking the bootloader would be a miracle
alvydasd2 said:
Rooting ain't gonna be easy on this phone that's if you can unlock the bootloader which is pretty much impossible unless you have a Chinese variant of the phone or somehow figure out a way to root it without unlocking the bootloader would be a miracle
Click to expand...
Click to collapse
Check the youtube video, I appear to have lol ... though I did notice that going into the recovery menu is all in chinese ... so I assume its the chinese version:
The only problem being ... I have no idea idea what this menu says -_-
I guess that is tomorrows episode though, connecting it via ADB+TWRP
Usually first thing when you open recovery is choosing a language idk why English wasn't there and btw the difference between the builds is you're running lower firmware so if you try to update it you should get the same build number as me and if u had the Chinese version your model would have been PEEM00 or something like that
alvydasd2 said:
Usually first thing when you open recovery is choosing a language idk why English wasn't there and btw the difference between the builds is you're running lower firmware so if you try to update it you should get the same build number as me and if u had the Chinese version your model would have been PEEM00 or something like that
Click to expand...
Click to collapse
ah ha I held the button down to long it auto selected chinese somehow I pressed back and got the recovery options ... not seeing TWRP though ... and when I do a TWP fastboot it does not boot into the bootloader...
The OEM Bootloader though is saying its unlocked in dev options
PaulGWebster said:
ah ha I held the button down to long it auto selected chinese somehow I pressed back and got the recovery options ... not seeing TWRP though ... and when I do a TWP fastboot it does not boot into the bootloader...
The OEM Bootloader though is saying its unlocked in dev options
Click to expand...
Click to collapse
Oppo has a weird bootloader cuz it can only be unlocked with an app that only works on Chinese version and to access fastboot u need a unlocked bootloader
just read this .... so there is no way to even fastboot the device https://forum.xda-developers.com/t/...access-for-oppo-phones-starting-2016.3348114/
I wonder if you could flash on the chinese version of the firmware
it seems that the device is really a 'realme gt 5g' .... trying to verify this
PaulGWebster said:
it seems that the device is really a 'realme gt 5g' .... trying to verify this
Click to expand...
Click to collapse
It's not -_-

Categories

Resources