I am not able to run TWRP recovery after installing pixel experience rom on my moto one power and I am not able to switch partitions from a to b .
Oh my desktop in the command prompt of minimal ADB and fastboot it always shows an error of partition not found,
Or when I try the command
'Fastboot boot recovery.img'
My phone does not boot into recovery although my ROM is working properly but I am not able to run the TWRP recovery again as I wanted to root my moto one power I think there is a partition error can anyone help!
Related
hello,
I buyed a moto g, it's my first smarthphone...
I followed this tuturial http://forum.xda-developers.com/moto-g-2014/development/guide-root-moto-g-2nd-gen-2014-t2874245,
I get to unlock the bootloader, but when I get to this point
4. Flash Recovery through fastboot mode/bootloader mode
and Go into your adb+fastboot folder and Type in CMD prompt
Command :
Code: fastboot flash recovery TWRP2801-titan-motog-2014.img
can't get the moto g in flash recovery mode, it appear a dead android with a RED ! TRIANGLE...
any idea to resolve this...
RastaFATian said:
hello,
I buyed a moto g, it's my first smarthphone...
I followed this tuturial http://forum.xda-developers.com/moto-g-2014/development/guide-root-moto-g-2nd-gen-2014-t2874245,
I get to unlock the bootloader, but when I get to this point
4. Flash Recovery through fastboot mode/bootloader mode
and Go into your adb+fastboot folder and Type in CMD prompt
Command :
Code: fastboot flash recovery TWRP2801-titan-motog-2014.img
can't get the moto g in flash recovery mode, it appear a dead android with a RED ! TRIANGLE...
any idea to resolve this...
Click to expand...
Click to collapse
#If U Successfully unlocked ur Bootloader then,
place the recovery image in the same directory as fastboot.
Open a terminal on your PC and reboot the device into fastboot mode by typing
adb reboot bootloader
or by using the hardware key combination
(press & hold Volume down and power button When phone is off)
#Once the device is in fastboot mode, verify your PC sees the device by typing
fastboot devices
If you don't see your device serial number, and instead see "<waiting for device>", fastboot is not configured properly on your machine.
#Flash recovery onto your device by entering the following command:
fastboot flash recovery your_recovery_image.img
where the latter part is the filename of the recovery image.
Once the flash completes successfully, reboot the device into recovery to verify the installation. Boot to recovery instructions: Hold Volume Down & Power simultaneously. On the next screen use Volume Down to scroll to recovery and then use Volume Up to select.
I successfully installed twrp recovery system but I can't do any backup, the system reboot in the process...
flash the recovery again and try...
jbanti said:
flash the recovery again and try...
Click to expand...
Click to collapse
It's not my fault.... seems a bug of twrp
XT 1068 UK
TWRP 2.8.0.1 Back up fails to both internal and external SD.
When external selected, backup starts but after 10 to 30 seconds it reboots the device. It starts to back up files and then just reboots. If I don't select compress backup, then it starts to backup more files before it reboots. Seems to be time related. Also tried unplugging while backing up and same issue.
Folders get created in all cases for external SD but data files. Not sure where the log files would get stored. Suspect they don't get created as the system reboots during the backup
I have unlocked my bootloader and when I try to install TWRP recovery and open a cmd write the commands 'adb devices' and "fastboot devices" to check whether connected or not it shows connected then reboot to to bootloader but when I put command "fastboot flash recovery recovery. img" I get " cannot load recovery. Img" . I also downloaded the latest TWRP victara and adb, fastboot aswell but can't get what problem is please Help guys!!!
Vedang V said:
I have unlocked my bootloader and when I try to install TWRP recovery and open a cmd write the commands 'adb devices' and "fastboot devices" to check whether connected or not it shows connected then reboot to to bootloader but when I put command "fastboot flash recovery recovery. img" I get " cannot load recovery. Img" . I also downloaded the latest TWRP victara and adb, fastboot aswell but can't get what problem is please Help guys!!!
Click to expand...
Click to collapse
So you got the latest ADB and Fastboot:
https://developer.android.com/studio/releases/platform-tools.html
You got the latest TWRP Victara:
https://twrp.me/motorola/motorolamotox2014.html
Extract ADB and Fastboot, and put the TWRP img file in the same folder, start command prompt as Admin and Change Directory to where the files are:
cd C:\Users\User\Downloads\platform-tools (this is just an example)
fastboot flash recovery twrp-3.2.1-0-victara.img
Boot into recovery immediately.
Vedang V said:
I have unlocked my bootloader and when I try to install TWRP recovery and open a cmd write the commands 'adb devices' and "fastboot devices" to check whether connected or not it shows connected then reboot to to bootloader but when I put command "fastboot flash recovery recovery. img" I get " cannot load recovery. Img" . I also downloaded the latest TWRP victara and adb, fastboot aswell but can't get what problem is please Help guys!!!
Click to expand...
Click to collapse
Did you install the Motorola USB Drivers?
https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/79106/p/30,75,27,
Did you type the full name of the img file, including .img
You must write fasstboot flash recovery (full name of the file ot rename it).img.
When is finished not take off the cable and run recovery from device bootloader.
Thats it.
Hello. I ported latest twrp from nexus 2012 to ouya. You can't install it because ouya don't have enough space on recovery partition. You need to boot it from fast boot
fastboot boot recovery.img
download: http://www.mediafire.com/file/7gyb6xjdwr8k3n0/recovery.img
Everything is working
I recommend to disable screen timeout after first boot
Not a single custom recarevi is flashed (writes abortet), being in the stock recovery with the command in the command line adb sideload. Tried using commands in the command line, and put programs like Flashify (for root users) and Rashr - Flash Tool ,does not help, error.
After several time failing to flash persistent TWRP, i figure out that miui boot image overwrite custom recovery maybe. Thus, although flashing twrp via adb successfully but it will go back Mi recovery after reboot device.
Let follow my step to reach successful installation persistent TWRP
1. Unlock bootloader your device is prerequisite
2. Down load ADB & TWRP(sakura).img
3. Access into fastboot mode by holding Pow + vol-
4. Shift + Righ click at ADB folder and chose "open command window here"
5.Type command "fastboot flash antirbpass twrp.img" => your sakura will access into TWRP
Not use command "fastboot flash recovery twrp.img" ortherwise you will get error : FAIL (remove: rollback version downgrade)
Remember : never let your device boot into Miui otherwise you will fail
6. In TWRP chose wipe/format data – type yes .After that you chose reboot/recovery. Now your device return fastboot mode again
7.In PC type command "fastboot boot twrp.img" => your device access into TWRP
8. In TWRP chose install/install image then select file TWRP.img and sweep for installing
Now TWRP was installed persistent in your device
TWRP: https://dl.twrp.me/sakura/
nguyenduytrungts said:
After several time failing to flash persistent TWRP, i figure out that miui boot image overwrite custom recovery maybe. Thus, although flashing twrp via adb successfully but it will go back Mi recovery after reboot device.
Let follow my step to reach successful installation persistent TWRP
1. Unlock bootloader your device is prerequisite
2. Down load ADB & TWRP(sakura).img
3. Access into fastboot mode by holding Pow + vol-
4. Shift + Righ click at ADB folder and chose "open command window here"
5.Type command "fastboot flash antirbpass twrp.img" => your sakura will access into TWRP
Not use command "fastboot flash recovery twrp.img" ortherwise you will get error : FAIL (remove: rollback version downgrade)
Remember : never let your device boot into Miui otherwise you will fail
6. In TWRP chose wipe/format data – type yes .After that you chose reboot/recovery. Now your device return fastboot mode again
7.In PC type command "fastboot boot twrp.img" => your device access into TWRP
8. In TWRP chose install/install image then select file TWRP.img and sweep for installing
Now TWRP was installed persistent in your device
TWRP: https://dl.twrp.me/sakura/
Click to expand...
Click to collapse
there is an easier way ,,...
stock miui stock miuui recovery:
fastboot boot twrpname.img
in booted twrp flash twrp img.
done
This thread is intended to get a fully working twrp for our new device sooner than later by more of us participating.
This is a testing thread so YES ANYTHING CAN GO WRONG. But most likely will not go wrong..
All test builds compiled by me are from @mauronofrio source code
https://github.com/mauronofrio/android_device_oneplus_guacamole_TWRP
This guide was copied and pasted from @mauronofrio Twrp thread.
Install guide:
Actually seems "fastboot boot twrp.img" is not working so we need to use another guide:
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Now you should check which slot are you using with this command "fastboot getvar current-slot"
5. Now you should change the slot in use with this command "fastboot --set-active=*" you should replace with the slot is not in use, for example if you are using slot a the command will be "fastboot --set-active=b"
6. Now you should flash the twrp in the boot partion using this command "fastboot flash boot twrp.img"
7. Now reboot the device with in recovery mode scrolling the menu with the volume button and selecting "Recovery Mode" with the power button
8. First thing go in reboot menu and restore the old active slot
9. Now you can flash the installer (Actually you can do it using sideload, start sideload server from twrp advanced menu and from pc use this command "adb sideload twrpinstaller.zip")
If you are already rooted, you can skip all and directly flash the installer like a magisk module. Always remember that after you flashed the installer you will be unrooted.
Tips:
If you alread have a twrp flashed you can only flash the new installer zip or the new installation method to update your TWRP (remember to flash again magisk or your system will not boot).
If you have some problems with backup, like 255 error or something similar please check this guide: https://forum.xda-developers.com/one...e-999-t3801632
For the Bacups use always "system_image" and "vendor_image" instead of "system" and "vendor".
I need the following logs in order to find issues.
start a terminal window and enter below commands to get the logs
When TWRP boots enter below commands in terminal:
Code:
adb shell "getprop" > getprop.txt
adb pull /tmp/recovery.log
adb shell "dmesg" > dmesg.log
adb logcat > logcat.txt
and post the files here.
Links will be in post #2
Links to test builds
Test-0.2 f2fs filesystem
Twrp.img https://www.androidfilehost.com/?fid=1395089523397969888
Twrp installer https://www.androidfilehost.com/?fid=1395089523397969887
Test-0. 3 ext4 filesystem
Twrp.img https://www.androidfilehost.com/?fid=1395089523397969903
Installer https://www.androidfilehost.com/?fid=1395089523397969902
Under 6. Should we be using "fastboot flash recovery xxx.xxx" or the one from the post?
I might be able to test evening today.
Sent from my GM1911 using Tapatalk
vickyjusme said:
Under 6. Should we be using "fastboot flash recovery xxx.xxx" or the one from the post?
I might be able to test evening today.
Sent from my GM1911 using Tapatalk
Click to expand...
Click to collapse
fastboot flash boot twrp-test.img
Tried this method, but TWRP does not load. Stuck on this (image attached)
Reboot sticks to this screen again. Cannot access fastboot from here, but I can see my device from adb devices. Help me?
https://imgur.com/1s6dejl
Edit: start by power on+volume down loads fastboot.. Phew...
vukis said:
Tried this method, but TWRP does not load. Stuck on this (image attached)
Reboot sticks to this screen again. Cannot access fastboot from here, but I can see my device from adb devices. Help me?
https://imgur.com/1s6dejl
Edit: start by power on+volume down loads fastboot.. Phew...
Click to expand...
Click to collapse
Where are the logs. Please don't test and not provide logs. But thanks for informing test 0.3 doesn't work.
Just wondering how long you waited.