Database Develop

Bricked P9

Hello guys, please help me,
Since 3 days im the owner of a P9. Like other people from here i like to flash new firmware.
What i did was flashing the Nougat beta, that was fine, i decide to go back to stock and flash a ota file:
EVA-L09C150B180 the update run and the phone reboot, but now the problem. I'm stuck on the Huawei logo.
I can't enter recovery, i can't enter fastboot. Only the Huawei logo. I call the service center, they say i have to send it to the service center. But tomorrow i go on holiday. Can someone help me?

Sebastiaanlabr said:
Hello guys, please help me,
Since 3 days im the owner of a P9. Like other people from here i like to flash new firmware.
What i did was flashing the Nougat beta, that was fine, i decide to go back to stock and flash a ota file:
EVA-L09C150B180 the update run and the phone reboot, but now the problem. I'm stuck on the Huawei logo.
I can't enter recovery, i can't enter fastboot. Only the Huawei logo. I call the service center, they say i have to send it to the service center. But tomorrow i go on holiday. Can someone help me?
Click to expand...
Click to collapse
I had a similar situation and called Huawei service centre to send me labelled envelope to send for repair. But soon, I wanted to give it few tries. Within few hours I brought my device to life.
I don't know the ways you tried to get on to bootloader mode (download mode). Once you get in to download mode then you can bring your device back to working.
Connect USB cable with your PC. Press volume down button firmly and now plug the USB cable in to your device. Keep pressing down "volume down" button until you get in to download mode. Flash stock recovery (the version I had when bought my device was EVA-L09C432B166).
Copy on to your external sdcard the dload folder having full stock ROM suitable to your device (MM 6.0 version and not naugat version). I would suggest to use PC to copy dload folder to your external sdcard and then load it back on to your device.
Now press volume up and down button together and press power button. When you see Huawei logo, keep pressing volume up and down button together until you see screen showing update starts.

smohanv said:
I had a similar situation and called Huawei service centre to send me labelled envelope to send for repair. But soon, I wanted to give it few tries. Within few hours I brought my device to life.
I don't know the ways you tried to get on to bootloader mode (download mode). Once you get in to download mode then you can bring your device back to working.
Connect USB cable with your PC. Press volume down button firmly and now plug the USB cable in to your device. Keep pressing down "volume down" button until you get in to download mode. Flash stock recovery (the version I had when bought my device was EVA-L09C432B166).
Copy on to your external sdcard the dload folder having full stock ROM suitable to your device (MM 6.0 version and not naugat version). I would suggest to use PC to copy dload folder to your external sdcard and then load it back on to your device.
Now press volume up and down button together and press power button. When you see Huawei logo, keep pressing volume up and down button together until you see screen showing update starts.
Click to expand...
Click to collapse
Thanks for ur help! What i have is this, i ONLY see the Huawei logo. when i restart the phone, even with for example volume down only the huawei logo is showing. when i press power and volume up and down, the same, only the huwawei logo is showing. Pressing power and volume down, put usb cable in phone, only Huwawei logo is showing

update, im in download mode! how can i thank u!!!

Sebastiaanlabr said:
update, im in download mode! how can i thank u!!!
Click to expand...
Click to collapse
Well done. Click on Thanks button.

smohanv said:
Well done. Click on Thanks button.
Click to expand...
Click to collapse
Now im in the fastboot screen, i have Hisuite open but ask for a connection with phone. I dont have a drive on my pc to send something to the sd card. Only a fastboot screen. Can u help me?

What i have now, a fastboot screen, i can transfer a update.app to my external sd card trough my other phone. Is dat correct, transfer a update.app to my external sd card into the dload folder? and which firmware?

Sebastiaanlabr said:
What i have now, a fastboot screen, i can transfer a update.app to my external sd card trough my other phone. Is dat correct, transfer a update.app to my external sd card into the dload folder? and which firmware?
Click to expand...
Click to collapse
Copy the entire dload folder in to sdcard. You can also use through other phone and use the external sd card. It should work. As long as you know how to get in to fastboot screen your phone is live and you don't have to be panic.

smohanv said:
Copy the entire dload folder in to sdcard. You can also use through other phone and use the external sd card. It should work. As long as you know how to get in to fastboot screen your phone is live and you don't have to be panic.
Click to expand...
Click to collapse
I have only a updaten.app file. Can u give me a URL for proper firmware ande recovery

Sebastiaanlabr said:
I have only a updaten.app file. Can u give me a URL for proper firmware ande recovery
Click to expand...
Click to collapse
You are nearly there. Check the UPDATE.APP file size. If it is around 2gb then it is a full firmware. All you have to do is, create a folder as dload and copy UPDATE.APP in to the folder. Also, you may need META-INF files inside dload folder (may be update works without this META-INF). Try without this META-INF. I have sent META-INF in zipped file. You can download and unzip in to dload folder.
Good luck.

smohanv said:
You are nearly there. Check the UPDATE.APP file size. If it is around 2gb then it is a full firmware. All you have to do is, create a folder as dload and copy UPDATE.APP in to the folder. Also, you may need META-INF files inside dload folder (may be update works without this META-INF). Try without this META-INF. I have sent META-INF in zipped file. You can download and unzip in to dload folder.
Good luck.
Click to expand...
Click to collapse
Hello sir, i dont see any file in my inbox. I only can enter fastboot at the moment

Sebastiaanlabr said:
Hello sir, i dont see any file in my inbox. I only can enter fastboot at the moment
Click to expand...
Click to collapse
Sorry. Forgot to attach. Now I had attached in my previous messaage.

smohanv said:
You are nearly there. Check the UPDATE.APP file size. If it is around 2gb then it is a full firmware. All you have to do is, create a folder as dload and copy UPDATE.APP in to the folder. Also, you may need META-INF files inside dload folder (may be update works without this META-INF). Try without this META-INF. I have sent META-INF in zipped file. You can download and unzip in to dload folder.
Good luck.
Click to expand...
Click to collapse
smohanv said:
Sorry. Forgot to attach. Now I had attached in my previous messaage.
Click to expand...
Click to collapse
Can u help me on skype? i go on holiday tomorrow..if u dont want u can say no offcorse

Sebastiaanlabr said:
Can u help me on skype? i go on holiday tomorrow..if u dont want u can say no offcorse
Click to expand...
Click to collapse
I have sent PM to you. Check your inbox.

Hi
I have the same issue, I read the topic but I still in trouble.
If someone can help me ...

Back to emui 8.0 stock

I SPECIFICALLY TRIED THIS ON HONOR 9I RNE-L22 CANT GUARANTY IF IT WILL WORK ON OTHER DEVICES
DEFINITLY NOT FOR NOOBS
READ EVERY STEPS VERY CAREFULLY BEFORE PROCEEDING
PREREQUISITE -
Honor 9i RNE-L22
Huawei multi-tool
Brains
Link
Huawei Multi-tool
Setting up multitool before unbricking
- Simply install and the Open multitool.
- If asks for update then update the applicatin.
- Install driver from the right corner drop down menu
- then click on choose device code name select RNE and leave the rest
- the tick mark the EMUI 8
- go to misc tab
- click on run firmware finder
- once the firmware finder app is opened it may ask to update update it
- then once update is done click on Common base tab
- once in common base tab go to search field and type this RNE-L22C675 and press entre
- a list of firmware will be shown select the second one (RNE-L22C675CUSTC675D1B310 (8.0.0.310) 2.85gb
- click on file list you will get three links, copy each link one at a time and download the files with IDM(for faster download)
- Once download is complete, extract each zip file in seperate folders (folder one - Update, folder 2 - update_data_full_public,
folder 3 - update_full_RNE-L22_hw_in
- go to huawei multitool and go to unbrick tab,
- once in unbrick tab select LAUNCH HUAWEI UPDATE EXTRACTOR
- once the Update extractor app opens click on settings tab and unchek the option checksum header
- then go to unpack tab and select the UPDATE.APP file of the first folder, you will see alot of files press and hold cntrl button and
select only the files that i mention here SYSTEM.img, RAMDISK.img and RECOVERY_RAMDISK , then right click and select "
extract selected", now it will show a dialogue box to choose a folder (create a folder in desktop as Unbrick) select the folder .
- once extraction is done then again go to update extractor and now select the UPDATE.APP from the third folder and it will a lot
of files select only that i mention here CUST.img and right click and select "extract selected" choose the same folder that you
created in desktop as Unbrick.
- once the extraction is done go back to huawei multitool and to go unbrick tab and select specify folder and choose the folder
where you extracted those img file(that is the Unbrick folder from desktop)
- once folder selected on the right side there is a progress section it will show as all images are found.
- now connect your device in fastboot mode and click on the refresh icon beside device not connected it will recognise your device.
- now click on unbrick and the flash process will start.
- once it shows flash is cmplete disconect you device and restart.
VOILA u r back on EMUI 8.0
Important note
Once you boot up your device on emui you might find there are many things not working like Themes, Equilizer, VOLTE...
HA ha ha DONT PANIC there is a solution to that too..
-Now once your are in EMUI open settings and enable USB debugging
-now if u have hisuit in your computer uninstall that and restart your pc once,
-now open huawei multitool go to misc tab and click on "Installing HiSuit for DNS"
-it will download an older version and it will install, install and DO NOT UPDATE that.
-Once installation complete open hisuit and connect your device and your device will ask for ADB permission alow that and your device will connect
-now open firmware finder app and search the same firmware and right click on "filelist" and select copy
and click on dns update icon (cloud and sheet sign) there will a blank box right click there and select paste, and then click on register it will show as now you can proceed .. now click on "copy DNS to clipboard.
- Now open your pc network settings and change the current networks DNS with the one you copied and save.
- now come to hisuit and click on update it will show there is an update now proceed with the update.(It will take almost 40mis depending on your networks speed)
- WHILE UPDATING DO NOT DISCONNECT THE DEVICE. AND MAKE SURE THERE IS ATLEAST 60% CHARGE IS THERE IN YOUR DEVICE.
- now after updating is complete your device will restart and boot into STOCK EMUI
- disconnect your device
- restore your networks (DNS) to what was your networks default.
- now everything will work except VOLTE.
- AGAIN DONT PANIC ONE LAST STEP IS LEFT.
- go to about phone and check for update there you will get an official update sized around 580mb ,
proceed with the update.
VOILA you are in official EMUI stock rom.. EVERYTHING WORKS PERFECTLY FINE.
No bugs nothing.

Thanks, man. You are really helpful...
---------- Post added at 06:01 PM ---------- Previous post was at 06:00 PM ----------
Could you upload the Huawei multi tool in any other platform. Mega.nz is not responding.

Will this relock the bootloader?

Worked for me. I rebooted and everything is working. Even Bolte without performing those extra steps. Thanks @sknoman1
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
Only bootloader is still unlocked and still getting warning message while booting

AnantNigam said:
Worked for me. I rebooted and everything is working. Even Bolte without performing those extra steps. Thanks @sknoman1
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
Only bootloader is still unlocked and still getting warning message while booting
Click to expand...
Click to collapse
To lock bootloader.. go to the bootloader tab in multitool and there you can find an option as lock bootloader for that you will need the same unlock code that u used to unlock the bootloader in the first place.. follow the instructions which is given in the app.. its simple

hi , i forgot allow usb debugging option and wiped my rom and entered fastboot mode. my device is not detected. Do I have to wipe rom after allowing usb debugging and then enter into fastboot? And will there be any pop up coming after installing drivers? I dont get any pop up.
Device isn't get detected in fastboot mode. It gets detected when it is on. Can't understand.
In some blogs, Honor 7x and Honor 8 users posted that they got freezed at honor logo using this process. Why is that happening?
Why didn't we use vendor.img here?
I feel like im troubling u bro. sorry for that but u helped me like no one else did.

Praveen Jeykar said:
hi , i forgot allow usb debugging option and wiped my rom and entered fastboot mode. my device is not detected. Do I have to wipe rom after allowing usb debugging and then enter into fastboot? And will there be any pop up coming after installing drivers? I dont get any pop up.
Device isn't get detected in fastboot mode. It gets detected when it is on. Can't understand.
In some blogs, Honor 7x and Honor 8 users posted that they got freezed at honor logo using this process. Why is that happening?
Why didn't we use vendor.img here?
I feel like im troubling u bro. sorry for that but u helped me like no one else did.
Click to expand...
Click to collapse
Just follow every step from my tutorial and you won't have any problem.

How to unroot honor 9i?

sir my honor 9i not working
sknoman1 said:
I SPECIFICALLY TRIED THIS ON HONOR 9I RNE-L22 CANT GUARANTY IF IT WILL WORK ON OTHER DEVICES
DEFINITLY NOT FOR NOOBS
READ EVERY STEPS VERY CAREFULLY BEFORE PROCEEDING
PREREQUISITE -
Honor 9i RNE-L22
Huawei multi-tool
Brains
Link
Setting up multitool before unbricking
- Simply install and the Open multitool.
- If asks for update then update the applicatin.
- Install driver from the right corner drop down menu
- then click on choose device code name select RNE and leave the rest
- the tick mark the EMUI 8
- go to misc tab
- click on run firmware finder
- once the firmware finder app is opened it may ask to update update it
- then once update is done click on Common base tab
- once in common base tab go to search field and type this RNE-L22C675 and press entre
- a list of firmware will be shown select the second one (RNE-L22C675CUSTC675D1B310 (8.0.0.310) 2.85gb
- click on file list you will get three links, copy each link one at a time and download the files with IDM(for faster download)
- Once download is complete, extract each zip file in seperate folders (folder one - Update, folder 2 - update_data_full_public,
folder 3 - update_full_RNE-L22_hw_in
- go to huawei multitool and go to unbrick tab,
- once in unbrick tab select LAUNCH HUAWEI UPDATE EXTRACTOR
- once the Update extractor app opens click on settings tab and unchek the option checksum header
- then go to unpack tab and select the UPDATE.APP file of the first folder, you will see alot of files press and hold cntrl button and
select only the files that i mention here SYSTEM.img, RAMDISK.img and RECOVERY_RAMDISK , then right click and select "
extract selected", now it will show a dialogue box to choose a folder (create a folder in desktop as Unbrick) select the folder .
- once extraction is done then again go to update extractor and now select the UPDATE.APP from the third folder and it will a lot
of files select only that i mention here CUST.img and right click and select "extract selected" choose the same folder that you
created in desktop as Unbrick.
- once the extraction is done go back to huawei multitool and to go unbrick tab and select specify folder and choose the folder
where you extracted those img file(that is the Unbrick folder from desktop)
- once folder selected on the right side there is a progress section it will show as all images are found.
- now connect your device in fastboot mode and click on the refresh icon beside device not connected it will recognise your device.
- now click on unbrick and the flash process will start.
- once it shows flash is cmplete disconect you device and restart.
VOILA u r back on EMUI 8.0
Important note
Once you boot up your device on emui you might find there are many things not working like Themes, Equilizer, VOLTE...
HA ha ha DONT PANIC there is a solution to that too..
-Now once your are in EMUI open settings and enable USB debugging
-now if u have hisuit in your computer uninstall that and restart your pc once,
-now open huawei multitool go to misc tab and click on "Installing HiSuit for DNS"
-it will download an older version and it will install, install and DO NOT UPDATE that.
-Once installation complete open hisuit and connect your device and your device will ask for ADB permission alow that and your device will connect
-now open firmware finder app and search the same firmware and right click on "filelist" and select copy
and click on dns update icon (cloud and sheet sign) there will a blank box right click there and select paste, and then click on register it will show as now you can proceed .. now click on "copy DNS to clipboard.
- Now open your pc network settings and change the current networks DNS with the one you copied and save.
- now come to hisuit and click on update it will show there is an update now proceed with the update.(It will take almost 40mis depending on your networks speed)
- WHILE UPDATING DO NOT DISCONNECT THE DEVICE. AND MAKE SURE THERE IS ATLEAST 60% CHARGE IS THERE IN YOUR DEVICE.
- now after updating is complete your device will restart and boot into STOCK EMUI
- disconnect your device
- restore your networks (DNS) to what was your networks default.
- now everything will work except VOLTE.
- AGAIN DONT PANIC ONE LAST STEP IS LEFT.
- go to about phone and check for update there you will get an official update sized around 580mb ,
proceed with the update.
VOILA you are in official EMUI stock rom.. EVERYTHING WORKS PERFECTLY FINE.
No bugs nothing.
Click to expand...
Click to collapse
my phone is showing no os installed and cnt be able to open please help me sir and please send me your contact number

yogeshyadavv143 said:
my phone is showing no os installed and cnt be able to open please help me sir and please send me your contact number
Click to expand...
Click to collapse
did you follow the exact procedure?
if you have missed a single part that give you the exact message as no os installed

Hi guys, really sorry to ask, but how do I install Multi Tool on Mac OS? Thanks in advance!

This will work on Nova 2i? As this is same as Honor 9i.

does this method works for forcing update manually ???

Flash Huawei stock Firmware Via Normal Update
1- Create a new folder on your phone storage or in your SD card, and rename it to dload.
2- Download & extract Huawei Mobile Stock firmware & copy the UPDATE.APP file on dload folder
3- In your Huawei Mobile, Open the dialer and enter:
*#*#2846579#*#*
ProjectMenu => Software Upgrade => SDCard Upgrade => OK
4- Select the Update.app that you copy on your phone storage or in your SD card.
5- Now Wait until the installation process completes.
6- When the installation completes, the phone will restart automatically
7- If you have the Data File and you want to flash it to,
8- Create a new folder on your phone storage or in your SD card, and rename it to dload.
9- Download & extract the update_data_Xxxxx & move the new update.app to the dload folder.
10- In your Huawei Mobile, Open the dialer and enter:
*#*#2846579#*#*
ProjectMenu => Software Upgrade => SDCard Upgrade => OK
11- Select the Update.app that you copy on your phone storage or in your SD card.
12- Now Wait until the installation process completes.
13- That’s it! the phone will restart automatically.

Just get an error saying no sdcard installed, does not allow me to select from phone storage

LightningRocket said:
Just get an error saying no sdcard installed, does not allow me to select from phone storage
Click to expand...
Click to collapse
maybe with a usb type-c could work... i do not have it.
BTW have you also done step 1,2 ? probably it look only in fixed folder. I have no idea on how to donwload and extract UPDATE.APP

maremma said:
maybe with a usb type-c could work... i do not have it.
BTW have you also done step 1,2 ? probably it look only in fixed folder. I have no idea on how to donwload and extract UPDATE.APP
Click to expand...
Click to collapse
Have you tested it Maremma ? Also is it possible to force update to emui9?

benkiller47 said:
Have you tested it Maremma ? Also is it possible to force update to emui9?
Click to expand...
Click to collapse
nope I have no experience on huawei phone. no idea on how to download and unpack stock firmware
not idea on how do this :
2- Download & extract Huawei Mobile Stock firmware & copy the UPDATE.APP file on dload folder

maremma said:
nope I have no experience on huawei phone. no idea on how to download and unpack stock firmware
not idea on how do this :
2- Download & extract Huawei Mobile Stock firmware & copy the UPDATE.APP file on dload folder
Click to expand...
Click to collapse
Where have you seen this ?

benkiller47 said:
Where have you seen this ?
Click to expand...
Click to collapse
i dont' know if we can link external sites. in any case here:
h77ps://huaweiflash.com/how-to-flash-huawei-stock-firmware-all-methods/
if cross link is forbbidden i'll delete
edit: here there si video:
https://www.youtube.com/watch?v=Rhru9rCA8-8

It seems to recognise a USB device via an otg cable. Emui 9 beta would not load, currently trying to find a 8.1 based one to work.

LightningRocket said:
It seems to recognise a USB device via an otg cable. Emui 9 beta would not load, currently trying to find a 8.1 based one to work.
Click to expand...
Click to collapse
i found these 157 for CLT-09
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2943/g1604/v185245/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...v185245/f1/full/public/update_data_public.zip
http://update.hicloud.com:8180/TDS/...1/full/CLT-L09_ti_it/update_CLT-L09_ti_it.zip

I'm already running 157 so currently downloading a 161

LightningRocket said:
I'm already running 157 so currently downloading a 161
Click to expand...
Click to collapse
Message us as soon as you know if it work

LightningRocket said:
I'm already running 157 so currently downloading a 161
Click to expand...
Click to collapse
any luck ?

I see new updates every month for security patches but I am receiving none of them! Stuck on L29B152C432, July's security patches,
Any idea how to update the phone to the latest version of android, because firmware finder doesn't work anymore...

[ROM][JB4.2.1][A3000-H][CN][3G] A3000_A421_000_029_130327_CN_3G

Hi, this is stoch China ROM for IdeaTab A3000-H. It has only Chinesse and English languages. And it has A3000_prc_3gfull partition table, requied to flash many ROMs It deletes data (because of flash).
Ok, here is a link to firmware: https://www.mediafire.com/file/6g138sppofvioe5/A3000_A421_000_029_130327_CN_3G.zip/file
Link for drivers for MT65xx Preloader: https://www.mediafire.com/file/r8y5olumc16iye2/Drivers_v1.2_A3.zip/file
Link for SP Flash Tool: https://www.mediafire.com/file/dtl5mlckqxofpul/SP_Flash_Tool_v3.1336.0.198.zip/file
Spoiler: Instructions to flash this ROM
1. First of all, download ROM, drivers and SP Flash Tool.
2. Unpack drivers, ROM and Flash Tool
3. Run SP Flash Tool, press Scatter-loading, select MT6589_Android_scatter_emmc.txt from unpacked folder with ROM
4. Press Download.
5. Turn off tablet, connect it to PC with USB
6. Press Ctrl + R and type devmgmt.msc, click enter.
7. Find "MT65XX Preloader", click on update driver
8. Select "Manual update"
9. Browse the files, select "amd64" folder from "Drivers 1.2".
10. OK, if finished, unplug USB from PC.
11. Connect tablet again
12. If there is any error in SP Flash Tool, click "Stop" and "Firmware Upgrade"
13. Wait for green ring and voila!
If you like it, press Thanks
I hope you like it

How can I just replage logo.bin

mickchip said:
How can I just replage logo.bin
Click to expand...
Click to collapse
Uncheck all images (USRDATA, ANDROID, CACHE), check only LOGO and click Download. Then connect your tablet (power off it before) and done

Done, thank you.

mickchip said:
Done, thank you.
Click to expand...
Click to collapse
Press Like button, if you can

How To Guide Unbrick via SP Flash and mtk-bypass

Preparation​- Install Mi Flash Pro: https://miflashpro.com/
- Download Fastboot ROM: https://mifirm.net/
Extract ROM to somewhere.
Disable bootrom protection:​Visit: https://github.com/MTK-bypass/bypass_utility
Follow bypass steps, to disable protection. Don't forget to copy the payloads files to the bypass-utility folder.
After Protection Disabled:​Open Mi Flash Pro, click SP Flash.
Click options, disable LIB DA matchncheck.
1. Select Download-Agent file, it can be found in the extracted ROM folder, named MTK_AllInOne_DA.bin .
2. Select Scatter-loading file, it can be found in extracted ROM folder's /images directory, named MT6833_Android_scatter.txt .
Click Download and wait until it shows . Then you can reboot your phone, just pull out the cable and long press the power button.Your phone become alive again.

miaochenxi said:
Preparation​- Install Mi Flash Pro: https://miflashpro.com/
- Download Fastboot ROM: https://mifirm.net/
Extract ROM to somewhere.
Disable bootrom protection:​Visit: https://github.com/MTK-bypass/bypass_utility
Follow bypass steps, to disable protection. Don't forget to copy the payloads files to the bypass-utility folder.
After Protection Disabled:​Open Mi Flash Pro, click SP Flash.
Click options, disable LIB DA matchncheck.
1. Select Download-Agent file, it can be found in the extracted ROM folder, named MTK_AllInOne_DA.bin .
2. Select Scatter-loading file, it can be found in extracted ROM folder's /images directory, named MT6833_Android_scatter.txt .
Click Download and wait until it shows . Then you can reboot your phone, just pull out the cable and long press the power button.Your phone become alive again.
Click to expand...
Click to collapse
I was able to flash my Poco M4 but now I have "NV data is corrupted" error and it doesn't boot anymore. There is something that I can do now?

Tony2k said:
I was able to flash my Poco M4 but now I have "NV data is corrupted" error and it doesn't boot anymore. There is something that I can do now?
Click to expand...
Click to collapse
use SP Flash to flash it's fastboot ROM

Tony2k said:
I was able to flash my Poco M4 but now I have "NV data is corrupted" error and it doesn't boot anymore. There is something that I can do now?
Click to expand...
Click to collapse
Sama punya saya juga begitu please help

miaochenxi said:
use SP Flash to flash it's fastboot ROM
Click to expand...
Click to collapse
Tony2k said:
I was able to flash my Poco M4 but now I have "NV data is corrupted" error and it doesn't boot anymore. There is something that I can do now?
Click to expand...
Click to collapse
I have the same problem
after I used sp flash, my phone did not start, there is no imei in the smartphone
I flashed on custom, started up, but here's the problem ........ I can't call (((((((

miaochenxi said:
Preparation​- Install Mi Flash Pro: https://miflashpro.com/
- Download Fastboot ROM: https://mifirm.net/
Extract ROM to somewhere.
Disable bootrom protection:​Visit: https://github.com/MTK-bypass/bypass_utility
Follow bypass steps, to disable protection. Don't forget to copy the payloads files to the bypass-utility folder.
After Protection Disabled:​Open Mi Flash Pro, click SP Flash.
Click options, disable LIB DA matchncheck.
1. Select Download-Agent file, it can be found in the extracted ROM folder, named MTK_AllInOne_DA.bin .
2. Select Scatter-loading file, it can be found in extracted ROM folder's /images directory, named MT6833_Android_scatter.txt .
Click Download and wait until it shows . Then you can reboot your phone, just pull out the cable and long press the power button.Your phone become alive again.
Click to expand...
Click to collapse
Hey !
I followed the same procedure just used some other tool to bypass Mtkauth. Splashing done 100% and the okay appeared on screen. When I started my phone after installation. Nothing changed and I m struck in fastboot same as before. Actually I flashed the wrong region Rom and locked the bootloader even after repeating this procedure nothing has worked. Any idea what should be done. I m using Redmi Note 12 Pro