Database Develop

Unlocking bootloader and installing Custom recovery [Sprout4] [Marshmallow 6.0]

So i have successfully installed a custom recovery on my phone running Marshmallow and also unlocked the bootloader!
Its quite simple actually!
I am not responsible for any damage you make to your phone!
Steps-
1. Download the zip file from the link and extract it.
2. Install both the drivers and then proceed!(The drivers are universal and work for Windows 98,xp,vista,7,8,8.1,10 but in 8,8.1,10 you might need to turn off the digital signature verification-Make good use of google)
3.After installing the drivers , connect your phone in switched on and remember to turn on usb debugging in the dev options!
4. Open the unlock_bootloader_... and run the .bat file and follow the on screen steps( All the data will be formatted so make a backup beforehand)
5.After doing this you will void your warranty so make sure you know what you are doing!
6. Open the one click installer folder and replace the recovery.img with any recovery that you want.
7. Now again connect your phone in switched on mode and usb debugging on and run the .bat file of recovery installer.. and follow the on screen steps!
8.As soon as the the recovery installation is over do not let teh phone reboot just press the vol up button as the installation process stops and then go to recovery!
9.Boom!! Now you have a phone with unlocked bootloader and a custom recovery installed on marshmallow!!
10.Flash custom Kernels,Boot Animations, Logos and root your phone running marshmallow and brag!
Downloads--
Bootloader and Recovery.zip(27.4 MB)
Press Thanks:good: if this helped and if you have any querries just use the section below!

Recovery Kernel?
Hi bro just a quick question did you use the MM kernel in the custom recovery?
On our None AOSP standard Mediatek devices the rom does a Kernel check to ensure both the boot and recovery Kernels are of the same version eg KK boot = KK Recovery LP boot = LP Recovery so I just wondered if the MM Kernel still works in the Philz recovery or are you still using a kernel from a older version of android eg KK or LP.
Hope that makes sense to you :laugh:

How to open the unlock_bootloader ??? There is no such option

how about rooting? what method did you use?

bigrammy said:
Hi bro just a quick question did you use the MM kernel in the custom recovery?
On our None AOSP standard Mediatek devices the rom does a Kernel check to ensure both the boot and recovery Kernels are of the same version eg KK boot = KK Recovery LP boot = LP Recovery so I just wondered if the MM Kernel still works in the Philz recovery or are you still using a kernel from a older version of android eg KK or LP.
Hope that makes sense to you :laugh:
Click to expand...
Click to collapse
Actually i didn't work on the recovery, i just made the one click thing, i inserted any random recovery i found working on 6.0 .

cheeze.keyk said:
how about rooting? what method did you use?
Click to expand...
Click to collapse
i flashed a custom kernel and then the super su beta zip

akash.kotwani said:
How to open the unlock_bootloader ??? There is no such option
Click to expand...
Click to collapse
in the zip you will find a .bat file, open that and follow on screen instructions

How to relock bootloader if I ever want to?

net_freak said:
How to relock bootloader if I ever want to?
Click to expand...
Click to collapse
Well i did not make anything that can do that but you'll probably find it in other threads. You can also flash bootloader.using the stock rom file via sp flash tools to relock it just untick everything else but bootloader!

Unlocking bootloader is necessary? Can I not just do it with it locked bootloader?

net_freak said:
Unlocking bootloader is necessary? Can I not just do it with it locked bootloader?
Click to expand...
Click to collapse
You can but unlocking the bootloader opens up many other things for devs!

divyesh bansal said:
You can but unlocking the bootloader opens up many other things for devs!
Click to expand...
Click to collapse
Will the fastboot method to flash twrp work ? I'm on Android 6.0

net_freak said:
Will the fastboot method to flash twrp work ? I'm on Android 6.0
Click to expand...
Click to collapse
Yes it does, the tool is also all about it. In the one click recovery intaller folder replace the recovery.img with your twrp(you will have to rename twrp.img file to recovery.img) and follow the steps in the first post in this thread!

divyesh bansal said:
Yes it does, the tool is also all about it. In the one click recovery intaller folder replace the recovery.img with your twrp(you will have to rename twrp.img file to recovery.img) and follow the steps in the first post in this thread!
Click to expand...
Click to collapse
Thanks. . can I use all in one tool kit by @Faiyaz5yaz for the same

Deleted OS and won't flash new

[Rooted/Unlocked bootloader] So I deleted my OS trying to install a new rom (CM) I went into my custom recovery (philz touch 6) and I wiped everything and tried to flash cm. The CM I downloaded didn't install due to an error and when I tried to reboot my device, it stayed on the Warning screen. I've tried to sideload multiple roms (one at a time) and some gave me errors and when I installed the roms from:
http://forum.xda-developers.com/moto-x/development/xt1053-retail-stock-lollipop-flashable-t3155843
it successfully installed but when I went to reboot my device it just shows the warning screen for about 20 seconds and then it will just reboot again and repeat. I have tried to install:
cm-12.1-20160710-NIGHTLY-ghost
cm-12.1-20151117-SNAPSHOT-YOG7DAO1K9-ghost
cm-11-20141115-SNAPSHOT-M12-ghost
flexos_5.1.1_20150425_weekly_ghost
XT1058_RCICA_5.1_LPAS23.12-21.7-1_D
XT1058_RCICA_5.1_LPAS23.12-21.7-1_U
All of the above were attempted to be flashed through sideload
Thanks in advance,
Patrick

Put phone in bootloader and recover stock rom with fastboot

Jaizu said:
Put phone in bootloader and recover stock rom with fastboot
Click to expand...
Click to collapse
How would I do that?

PBMGaming said:
How would I do that?
Click to expand...
Click to collapse
Turn off your phone then turn on pressinf power button + volume down
Then you download any stock ROM based in your model, you can get them here: https://firmware.center/firmware/Motorola/Moto X (1st gen-2013)/Stock/
You will install fastboot+adb in your computer(you can find in google a link, it's pretty easy to do). Also you uncompress the .zip (the firmware that you just donwloaded) in the same location as your fastboot.
To flash the stock rom using fastboot you have a guide here: http://forum.xda-developers.com/moto-x/general/ref-return-to-stock-recovery-rooted-t3027079

Jaizu said:
Turn off your phone then turn on pressinf power button + volume down
Then you download any stock ROM based in your model, you can get them here: https://firmware.center/firmware/Motorola/Moto X (1st gen-2013)/Stock/
You will install fastboot+adb in your computer(you can find in google a link, it's pretty easy to do). Also you uncompress the .zip (the firmware that you just donwloaded) in the same location as your fastboot.
To flash the stock rom using fastboot you have a guide here: http://forum.xda-developers.com/moto-x/general/ref-return-to-stock-recovery-rooted-t3027079
Click to expand...
Click to collapse
Thank you so much for your help, although the tutorial you linked is explaining how to install rom from SD card and I was not able to do that, I was however able to extract the files and flash them via CMD and fastboot

[SOLVED] MI MIX Bootloop

Hey guys. i got my phone a week ago, was happily using it until i noticed the Vendor Rom 8.0.8.0 M0AHCNDI2 days ago. Decided to flash the Official Stable ROM with chinese MI PC Suite. Checked forums and finally after downloading the Official Stable Chinese ROM managed to flash my phone with it. Except for some problems i encountered while using Google apps it was running fine. After few hours i decided to try the Ofiicial Chinese Dev Rom aswell. But after flashing via Chinese MI PC Suite my phone got stuck on bootloop. Now i can't flash the stable rom back and my phone is stuck. Help Please, Thanks in advance

Kithrae said:
Hey guys. i got my phone a week ago, was happily using it until i noticed the Vendor Rom 8.0.8.0 M0AHCNDI2 days ago. Decided to flash the Official Stable ROM with chinese MI PC Suite. Checked forums and finally after downloading the Official Stable Chinese ROM managed to flash my phone with it. Except for some problems i encountered while using Google apps it was running fine. After few hours i decided to try the Ofiicial Chinese Dev Rom aswell. But after flashing via Chinese MI PC Suite my phone got stuck on bootloop. Now i can't flash the stable rom back and my phone is stuck. Help Please, Thanks in advance
Click to expand...
Click to collapse
Instead of using PC Suite, boot your phone into fastboot mode and flash the ROM using MiFlash. Don't use Mi PC Suite. Follow instructions on one of the guides in the forum and you should be fine.

satishp said:
Instead of using PC Suite, boot your phone into fastboot mode and flash the ROM using MiFlash. Don't use Mi PC Suite. Follow instructions on one of the guides in the forum and you should be fine.
Click to expand...
Click to collapse
Can i use Fastboot with locked bootloader?

Kithrae said:
Can i use Fastboot with locked bootloader?
Click to expand...
Click to collapse
Chances are it's already unlocked, with vendor rom (let's hope so). Check through fastboot with command prompt
fastboot oem device-info
Don't use PC suite until they fix it's problems.

jazz452 said:
Chances are it's already unlocked, with vendor rom (let's hope so). Check through fastboot with command prompt
fastboot oem device-info
Don't use PC suite until they fix it's problems.
Click to expand...
Click to collapse
My phone doesn't even charge now and doesn't show the mi logo any longer. The only thing happens when i connect the charger is that the led blinks red continuously. Is it hardbricked? What can i do now? Sorry to trouble you
Edited. Now I get the mi logo back after an hour of changing.

Kithrae said:
My phone doesn't even charge now and doesn't show the mi logo any longer. The only thing happens when i connect the charger is that the led blinks red continuously. Is it hardbricked? What can i do now? Sorry to trouble you
Click to expand...
Click to collapse
As you're not sure whether your phone is charging, I would suggest keeping it connected to the charger for a few hours. This way, it may eventually get charged atleast to a safe level at some point.
After this, if you dont already have ADB and Fastboot installed, install it from the guide in the forums. Make sure to uninstall PC Suite first.
Once ADB is installed, open up the shell, boot device into fastboot mode and connect to PC. In the command shell,
Type fastboot oem device-info
It should show you the device bootloader lock status. Though most phones which come with Vendor ROMs have unlocked bootloaders, this is not always the case as my phone came with a vendor ROM while bootloader was locked. I suspect this is because vendors may have a signed Custom ROM file which can be flashed using the stock recovery, meaning bootloader unlocking is not a necessity for them to load the custom firmware.
Once you check whether bootloader is unlocked, if it isnt, unlock the bootloader using the guide.
Then install MiFlash and flash the fastboot ROM

if it is locked (afaik, mi suite can lock bootloaders, but there is no compatible mi pc suite for the mix available, so it shouldn't) then you need a deep flash cable to force flash anything in miflash tool. buy one for a few dollar on aliexpress.
xiaomi deep flash cable. with the button.
xiaomi deep flash cable. with button and usb-C adapter

underlines said:
if it is locked (afaik, mi suite can lock bootloaders, but there is no compatible mi pc suite for the mix available, so it shouldn't) then you need a deep flash cable to force flash anything in miflash tool. buy one for a few dollar on aliexpress.
xiaomi deep flash cable. with the button.
xiaomi deep flash cable. with button and usb-C adapter
Click to expand...
Click to collapse
I was wondering how the OP flashed using Mi PC Suite considering the Mix isnt supported. Maybe he is referring to Mi Flash as PC Suite.
If thats the case he may have messed something during the flashing process. Isn't there a way to enter EDL mode without the deep flash cable? I think it was done via a fastboot command.

satishp said:
I was wondering how the OP flashed using Mi PC Suite considering the Mix isnt supported. Maybe he is referring to Mi Flash as PC Suite.
If thats the case he may have messed something during the flashing process. Isn't there a way to enter EDL mode without the deep flash cable? I think it was done via a fastboot command.
Click to expand...
Click to collapse
First of all THANK YOU ALL for helping out. I just downloaded the Chinese MI Pc Suite. It said my phone has an update (it was in chinese so i had to look it up via google translate) then i clicked download and update. it downloaded the 8.0.12.0 Chinese Stable rom and flashed my phone with it. It was working fine but i tried to flash the Dev Rom the same way and it's stuck now. I didn't even know the Mi Flash tool until i opened this thread. Now i have the Mi Flash tool but my phone doesn't show up on it. I don't know how to use ADB and Fast Flash tools. Tried the forum but there are so many guides and i'm not sure which one would suit my problem. Now all i want is getting my phone working again and switching to EU ROM and not touching anything risky ever again.

Kithrae said:
First of all THANK YOU ALL for helping out. I just downloaded the Chinese MI Pc Suite. It said my phone has an update (it was in chinese so i had to look it up via google translate) then i clicked download and update. it downloaded the 8.0.12.0 Chinese Stable rom and flashed my phone with it. It was working fine but i tried to flash the Dev Rom the same way and it's stuck now. I didn't even know the Mi Flash tool until i opened this thread. Now i have the Mi Flash tool but my phone doesn't show up on it. I don't know how to use ADB and Fast Flash tools. Tried the forum but there are so many guides and i'm not sure which one would suit my problem. Now all i want is getting my phone working again and switching to EU ROM and not touching anything risky ever again.
Click to expand...
Click to collapse
You can follow this guide compiled by @underlines : Guide: (17-01-09) Flash Global/China ROM, Root, gapps, Xposed, TWRP
This guide has step by step instructions on how to install ADB and fastboot, unlock bootloader and Flash a ROM of your choice. Providing you follow the guide carefully, you wouldn't face any issues.
I have also posted a guide which is only intended to be an add-on to the guide posted by underlines. This means you should already have the recommended files downloaded and bootloader unlocked. using the guide above.
My guide uses a different version of MiFlash as certain Vendor ROMs are not compatible with the newer version. If you are unable to flash using the original guide above, you can also try following my guide. Guide to switch from Vendor ROM to EU ROM
But I would strongly recommend going through the guide posted by @underlines as you are new to flashing.

satishp said:
You can follow this guide compiled by @underlines : Guide: (17-01-09) Flash Global/China ROM, Root, gapps, Xposed, TWRP
This guide has step by step instructions on how to install ADB and fastboot, unlock bootloader and Flash a ROM of your choice. Providing you follow the guide carefully, you wouldn't face any issues.
I have also posted a guide which is only intended to be an add-on to the guide posted by underlines. This means you should already have the recommended files downloaded and bootloader unlocked. using the guide above.
My guide uses a different version of MiFlash as certain Vendor ROMs are not compatible with the newer version. If you are unable to flash using the original guide above, you can also try following my guide. Guide to switch from Vendor ROM to EU ROM
But I would strongly recommend going through the guide posted by @underlines as you are new to flashing.
Click to expand...
Click to collapse
Thank you i will follow the guide but just have one quick question. My phone is stuck on MI logo with mi.com written underneat. can i still have my phones bootloader unlocked?

Kithrae said:
Thank you i will follow the guide but just have one quick question. My phone is stuck on MI logo with mi.com written underneat. can i still have my phones bootloader unlocked?
Click to expand...
Click to collapse
Yes! You wont have a problem unlocking bootloader. Boot the phone into fastboot mode and check unlock status first. Instructions are clearly given in the guides and everything should go well providing you carefully follow the guide.

Ok i will now Wait for my bootloader unlock message. Thank you

Kithrae said:
Ok i will now Wait for my bootloader unlock message. Thank you
Click to expand...
Click to collapse
You fixed it once then broke it again make sure its charged properly before your next F-up, like everyone keeps telling no use pc-suite, it's fixable and a free lesson on android mobile. How would you even attempt changing roms without mi-flash and adb. I'm betting its already unlocked did you check?

satishp said:
Yes! You wont have a problem unlocking bootloader. Boot the phone into fastboot mode and check unlock status first. Instructions are clearly given in the guides and everything should go well providing you carefully follow the guide.
Click to expand...
Click to collapse
Finally got my unlock message and got my phone unlocked. thanks for all the help. But i'm a bit confused following the guide since i'm a noob and don't want to take risks again. First of all do i need to flash the Chinese ROM again before flashing EU rom? Secondly on step 4 of flalshing EU rom it says this:
"type
Code:
fastboot flash recovery C:\path\to\your\twrp-3.0.2-0-rc2-eu-lithium.img
change the colored path to the correct path to your twrp file (not the EU one) and press enter"
what does "(not the EU one)" means?

Kithrae said:
Finally got my unlock message and got my phone unlocked. thanks for all the help. But i'm a bit confused following the guide since i'm a noob and don't want to take risks again. First of all do i need to flash the Chinese ROM again before flashing EU rom? Secondly on step 4 of flalshing EU rom it says this:
"type
Code:
fastboot flash recovery C:\path\to\your\twrp-3.0.2-0-rc2-eu-lithium.img
change the colored path to the correct path to your twrp file (not the EU one) and press enter"
what does "(not the EU one)" means?
Click to expand...
Click to collapse
You can use the TWRP RC2. This version has been confirmed by many to work with both the Official stable and dev ROMS.
Some have experienced issues with touch functionality within TWRP using RC1.
RC2 is the way to go. If you have already flashed one of the official roms, if you'd like to flash the EU ROM, you can follow my guide. Providing you follow all steps correctly, you should be on EU ROM.
Cheers!

satishp said:
You can use the TWRP RC2. This version has been confirmed by many to work with both the Official stable and dev ROMS.
Some have experienced issues with touch functionality within TWRP using RC1.
RC2 is the way to go. If you have already flashed one of the official roms, if you'd like to flash the EU ROM, you can follow my guide. Providing you follow all steps correctly, you should be on EU ROM.
Cheers!
Click to expand...
Click to collapse
I haven't Flashed any ROMS yet and i don't know which one to Flash ATM. My phone got bootloop while flashing Chinese DEV from Chinese Stable. Should i flash any other ROMs before flashing "xiaomi.eu_multi_MIMix_7.1.12_v8-6.0.zip"?

Kithrae said:
I haven't Flashed any ROMS yet and i don't know which one to Flash ATM. My phone got bootloop while flashing Chinese DEV from Chinese Stable. Should i flash any other ROMs before flashing "xiaomi.eu_multi_MIMix_7.1.12_v8-6.0.zip"?
Click to expand...
Click to collapse
Flashing official ROM is not necessary if TWRP is working fine. Flash TWRP RC2 using fastboot, if touch is working for you, you can proceed copying the required files.
Follow my guide on this link.
If TWRP is working fine for you, you can follow from Step 6. If touch is frozen in TWRP, follow my guide from Step 1.
If TWRP works for you, when it prompts you to swipe right, make sure you flash the dm-verity and forced encryption disabler from the link I have provided, soon after you have swiped right to allow system modifications. If not you may face a bootloop.
Keep the guide open and follow the steps.

satishp said:
Flashing official ROM is not necessary if TWRP is working fine. Flash TWRP RC2 using fastboot, if touch is working for you, you can proceed copying the required files.
Follow my guide on this link.
If TWRP is working fine for you, you can follow from Step 6. If touch is frozen in TWRP, follow my guide from Step 1.
If TWRP works for you, when it prompts you to swipe right, make sure you flash the dm-verity and forced encryption disabler from the link I have provided, soon after you have swiped right to allow system modifications. If not you may face a bootloop.
Keep the guide open and follow the steps.
Click to expand...
Click to collapse
OK! i will try it as soon as EU rom downloads. i don't know how to thank all of you ^^

Kithrae said:
OK! i will try it as soon as EU rom downloads. i don't know how to thank all of you ^^
Click to expand...
Click to collapse
No worries! Hope you get it running! Glad to help!
Cheers!

k50a40 s433 for A7000-a?????

hi and mode, i hope this is the rite place to ask. this is what in using on my phone now:-
twrp - 3.0.0.3
flash using SP - A7000-a_PLUS_S308_160618_ROW
Backup file from TWRP name - Lenovo_K50-T5
i want to use k50a40 s433 on my a7000-a phone, so i found this thread,
http://forum.xda-developers.com/k3-n...a40-6-t3370537
so i flash its but not a rooted build( check with root checkers) . everything work like charm for this rom, only my nvram a missing. I know how to fix nvram problem, but i must root this s433 rom first .Been through lot of link and downloaded the fix this problem but no good result. The moderator didnt reply me so I asking help from you all moderator to show me the right way to do it. Any help will be a big thanks

Hello mate..
Download SuperSU.zip from the web and copy it to your storage and flash it using TWRP. Your device will be rooted...
Thank you...

hi shamanth... link for SU.zip and recovery at the forum not working, i try using SU.zip ver 2.71 and twrp ver 3.0.0.3 for rooting this s433 build, but my fon stuck at boot image, what to do? i follow instruction to flash and succeed... but rooting process not done

ijatoo said:
hi shamanth... link for SU.zip and recovery at the forum not working, i try using SU.zip ver 2.71 and twrp ver 3.0.0.3 for rooting this s433 build, but my fon stuck at boot image, what to do? i follow instruction to flash and succeed... but rooting process not done
Click to expand...
Click to collapse
It is supposed to work. Never mind. Did you try other supersu.zip files? Coz sometimes these packages may also be corrupt.
In case if you are not successful try this tool called lenovo k3 note manager..
https://forum.xda-developers.com/devdb/project/dl/?id=17830
Thanks.

shamanth_gowda said:
It is supposed to work. Never mind. Did you try other supersu.zip files? Coz sometimes these packages may also be corrupt.
In case if you are not successful try this tool called lenovo k3 note manager..
https://forum.xda-developers.com/devdb/project/dl/?id=17830
Thanks.
Click to expand...
Click to collapse
i got latest twrp 3.1.1 and superSU 2.82... let me try 1st,

DONE ROOTED S433 (solved dead A7000-a)
https://forum.xda-developers.com/k3-note/general/complete-tutorial-how-to-flash-k50-t5-t3360181.
i follow this step by step procedure, now im on k50a40 s433 ROOTED and i can put back my NVRAM. Just want to share whoever got problem flashing s433 on A7000-a, make sure download correct file on the thread and carefully read the instruction. If your platform are marshmallow, do flash boot image via twrp (flash image, not flash zip). My step from dead A7000-a to K50a40 :-
1. Use SP Flash (v5.1540.00.000) to flash K50a40_S422_160315_ROW( https://cloud.mail.ru/public/C9th/nvAqozUua )
2. Follow this step ( https://forum.xda-developers.com/showpost.php?p=66229157&postcount=4187 )
When the procedure done/finish( OK GREEN TICK ). Turn on ypur device normally, put this file on SD Card ( https://cloud.mail.ru/public/CNTk/6..._ROW_TO_K50a40_S424_160328_ROW_WC655382B6.zip ) to update s422 to s424 or do it OTA.
Now you should get K50a440 s424 on your device.
Done all this step...... will have notification to update s424 to s427... then s427 to s433, all this i done through OTA( or you can search for update.zip and put in SD )
TO ROOTED s433
1. Follow this step ( http://forum.xda-developers.com/k3-...3-note-k50-t3158522/post66156802#post66156802 ), make sure all necessary file are downloaded and place on SD Card( read carefully the step )
After you done all the procedure, check rooted using root checker apk ( google play free )
BIG THANK YOU to :-
@emptywordsss
@stone_henge
@all mode and friend for helping

[ROM] [STOCK] [08-Mar] TWRP flashable Stock ROM [v340]

Code:
[B]NOTE : [/B]PROCEED AT YOUR OWN RISK. Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues.
If already on Stock Rom then visit THIS THREAD for OTA updates.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - TWRP_Stock_v340.zip from this post.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
Users coming from Android Pie reported microphone issues - in case you face it then flash DolbyPlus-Oreo_8.1.zip from THIS post via Magisk which might resolve the issue.
(optional) If you want to boost up by debloating then use this MOD.
(optional) If you want to boost up BATTERY then use this GUIDE.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
NOTE : ROM works independant of RAM i.e. applicable for 3/4/6 GB variants.
Recommended TWRP : https://androidfilehost.com/?fid=3700668719832241089 by @SagarMakhar.

To ROOT the ROM
Flash Magisk from TWRP and you will have root access

Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......

piku2008 said:
Well I am trying to flash this ROM coming from RR but somehow its taking half an hour to encrypt so is it necessary to encrypt can't we just skip it ???
also it did erased TWRP as when I am trying to get in TWRP using volume up + power button its get back to default bootloader that came with mobile .....
also do I have to flash again TWRP again after this to get back root via magisk......
Click to expand...
Click to collapse
Did you performed factory reset and flashed ROM & decrypt.zip
The TWRP survives the flash and Magisk can be flashed to Root the ROM but after above two files are flashed.

Well I successfully flashed ROM after complete factory reset with internal memory tooo ......
But some how TWRP got replaced with factory default (the one with root checker) with bootloader unlocked screen

Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available

Aftab_khatri said:
Thank you. Just updated to latest version from old stock rom. Please update new versions also whenever available
Click to expand...
Click to collapse
Will do

Thank You bro.. Your Guide has tested successfully from AOSiP build to stock ROM 309.. [emoji16]
Sent from my [device_name] using XDA-Developers Legacy app

AOSP to Stock
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...

jroviel18 said:
Good day, Can I use this method to go back in Stock Rom? Currently using AEX but I can't use my mobile data here in the Philippines, your answer would be a great help, Thank you...
[Update]
Good day mate, just flashed this, and I'm back to stock with root, Thanks Mate for this...
Click to expand...
Click to collapse
Great .. Sorry could not reply earlier but you got the resolution of the query.
For subseqeunt update with TWRP intact .. please follow this guide in future .. https://forum.xda-developers.com/as...to/rom-update-stock-firmware-keeping-t3808269

Update - WW-15.2016.1805.311
Updated Stock ROM file - TWRP_Stock_v311.zip now avaliable.
For those who are already on stock ROM,
The instructions to flash are in THIS POST.
For those who are on custom ROM,
The instruction to flash are in THIS POST

Do these zips format internal storage or not ??

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
No

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
I believe this is the exact same firmware as the official one. It is just modified to work with TWRP. Nothing more, nothing less.

aadi50 said:
Do these zips format internal storage or not ??
Click to expand...
Click to collapse
You will have to format data (i.e. factory reset) but the Internal Storage will be safe.

aaa
Work For Max Pro M1 ?
This rom XOOT not XOOTD
---------- Post added at 11:26 AM ---------- Previous post was at 11:07 AM ----------
.A.V.i.n.a.S.h. said:
Code:
[B]NOTE : [/B]Guide tested successfully to flash [U]Stock WW-15.2016.1805.309[/U] from AOSP extended (22/06 build) on primary device. Also I will try to help out in case of issues. BUT still proceed at your own risk.
This thread is useful for those who want to return to stock ROM from custom ROM while keeping TWRP & unlocked bootloader.
How to ,
Backup all your important app data.
Do a TWRP backup of current ROM. (precautionary step)
Download modified full recovery stock rom - Stock_X00T_Patch_May_Version_311_TWRP.zip.
Download decrypt.zip from HERE.
Reboot to TWRP.
Go to wipe and select swipe to Factory reset.
Flash the ROM file.
Flash decrypt.zip file.
Reboot & Enjoy.
(optional) If you want to boost up by debloating then use this MOD.
This will update your firmware to WW-15.2016.1805.311 to have updates after this follow THIS THREAD.
Remember that it takes a lot of time to create , test and upload these huge files for everyones use. So please hit Thanks! button on the bottom right of the post to keep me motivated
Click to expand...
Click to collapse
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english

arielrizuly said:
My Devices Zenfone Max Pro M1 X00TD
This your Rom Not WORKING X00T
Flash to TWRP error TWRP Has Restarting
sory bad english
Click to expand...
Click to collapse
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.

.A.V.i.n.a.S.h. said:
This ROM should work on X00T and X00TD both. Can you please validated checksum again for the downloaded file.
Click to expand...
Click to collapse
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.

Abby 244 said:
I am on stock build 311 and Rom X00TD , i am unable to root or even unlock bootloader on my device.
Tried all methods , on YouTube and xda but all wasted.
Though , i debloated my phone using one of the methods mention in a thread in xda and even installed xda navbar using adb.
Please help.
Click to expand...
Click to collapse
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.

.A.V.i.n.a.S.h. said:
Have you checked the drivers if they are installed.
Do one thing .. see if in fastboot .. if you get any responce for fastboot devices command from pc.
Click to expand...
Click to collapse
No response even in fastboot.