Question Soft Bricked Phone - POCO M3 Pro / Redmi Note 10 5G

Hello, I need help.
I tried to flash back to stock firmware using mi flash tool but it said error and it failed. I tried to flash again and then it didn't detect the device. It rebooted on its own and now it's stuck on bootloop with black screen. I can't get into fastboot or recovery mode.

shi-no_tenshi said:
Hello, I need help.
I tried to flash back to stock firmware using mi flash tool but it said error and it failed. I tried to flash again and then it didn't detect the device. It rebooted on its own and now it's stuck on bootloop with black screen. I can't get into fastboot or recovery mo
Click to expand...
Click to collapse

Use SP_flash_tool from MTK. go into flash mode (Power off first, then press and hold both Vol+ & Vol-, and press power bottom, then Plug in USB cable, do not release keep holding them until it detected.)
Follow the precedure of SP flash utility.
you may need to used Auth_bypass to bypass authority check.
Miflash can only be used in fastboot (bootloader) mode.

kirinin said:
Use SP_flash_tool from MTK. go into flash mode (Power off first, then press and hold both Vol+ & Vol-, and press power bottom, then Plug in USB cable, do not release keep holding them until it detected.)
Follow the precedure of SP flash utility.
you may need to used Auth_bypass to bypass authority check.
Miflash can only be used in fastboot (bootloader) mode.
Click to expand...
Click to collapse
Thank you, I've successfully used the Auth_bypass tool to disable the authority check. Now I'm waiting for it to turn off so I can flash the stock rom.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Fixed it! To anyone who underwent the same: just like what @kirinin says, wait for the phone to turn off. Have your spflashtool and mtkauthbypass tool ready.
Here's what I did:
1. Open spflashtool, load stock rom. IMPORTANT: Select everything but the preloader and make sure it's on download.
2. Open MTKAuthbypass tool. Click disable auth. It will wait for your phone to connect.
3. Put your phone in BRom mode by holding the vol-, vol+ and power buttons together then IMMEDIATELY CONNECT YOUR PHONE. DO NOT DISCONNECT IT
4. Press download in spflashtool after disable auth is successful. (Output should be like screenshot above this post.)
5. Wait.
For anyone asking:
Yes my bootloader is still unlocked after using spflashtool.

shi-no_tenshi said:
Fixed it! To anyone who underwent the same: just like what @kirinin says, wait for the phone to turn off. Have your spflashtool and mtkauthbypass tool ready.
Here's what I did:
1. Open spflashtool, load stock rom. IMPORTANT: Select everything but the preloader and make sure it's on download.
2. Open MTKAuthbypass tool. Click disable auth. It will wait for your phone to connect.
3. Put your phone in BRom mode by holding the vol-, vol+ and power buttons together then IMMEDIATELY CONNECT YOUR PHONE. DO NOT DISCONNECT IT
4. Press download in spflashtool after disable auth is successful. (Output should be like screenshot above this post.)
5. Wait.
For anyone asking:
Yes my bootloader is still unlocked after using spflashtool.
Click to expand...
Click to collapse

no need to wait to turn off -> press volume up + power.
and for me volume up and volume down works for Brom mode- not volume up, volume down and power.

Related

"Unfortunately boot failed, get more information..." Message, when I try to enter in

"Unfortunately boot failed, get more information..." Message, when I try to enter in
Hi everyone, just boutht this phone preowned. It works well, but i dont know if the ex-owner modded it bad.
Everytime i try to enter the phone in recovery mode (pressing vol-,vol+ and power) led starts blinking green and red colour, and a screen like this, appear to me:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I press volume down button to enter in rescue mode, and I get a new screen, it says: PHONE LOCKED (in a green color. Now what does it mean? Bootloader is still locked? Or the phone has problems?) and I cant to connect phone in rescue mode from hisuite.
I have the same problem (the screen I attached, appear to me) not only when i want to go into recovery mode, but also when I charge my phone when it s power off( when i charge it not in power on) or if i want to flash an update.app from local update menu.
What could i do? Im in trouble. Thanks
It seems like recovery is missing. I'd try to flash stock recovery image or twrp (both to be found here in the forum) via adb
Maybe this helps:
http://forum.xda-developers.com/showthread.php?t=2897606
I had the same situation. Just follow procedure that I was recently described here.
Good luck and keep us informed about your progress of getting phone back to life.
Thank you guys, im trying in the next hours. Could you explain me where to get adb? Please
Thank you all! I solved my problem following ur links. I denied root permission for adb , then i put it into fastboot and rescue mode and flashed the recovery.IMG stock through adb. Thanks again.
Mod, please close the thread thx
I'm glad you made it.
i can not access to recovery
Exclamation i can not access to recovery
Hi.
at yesterday ... my phone keeps rebooting and small LEd flashes red in slowly....
i could just flash the fastboot.img via fast boot.
at moment ... i can see that my phone power on and not reboot
and small LED flashes with three green and one red
still ... i can not access to recovery.... i am tried to flash recovery.img via fastboot...
just i can see ... when the phone power on... this page show to me :
http://forum.xda-developers.com/atta...7&d=1413537763
please help me...
I've a similar problem D:
Hi, my P7 after a flash of corrupted file and a reboot it don't turn on again, when i power the screen was black and led blinking Green Red Red Green and system not start, i've tried all the button combination (Vol + Power, Vol - Power, Vol+- Power) but recovery o fastboot not start D: T_T Help me PLEASEEEE :'(
If i put the cable on pc windows know a unknow device named ㄰㌲㔴㜶㤸 but i don't find any driver D: PLEASE HELP ME!!!
Thanks
darklife96 said:
Hi, my P7 after a flash of corrupted file and a reboot it don't turn on again, when i power the screen was black and led blinking Green Red Red Green and system not start, i've tried all the button combination (Vol + Power, Vol - Power, Vol+- Power) but recovery o fastboot not start D: T_T Help me PLEASEEEE :'(
If i put the cable on pc windows know a unknow device named ㄰㌲㔴㜶㤸 but i don't find any driver D: PLEASE HELP ME!!!
Thanks
Click to expand...
Click to collapse
i have this problem too.please help us.is there a way to solve this issue??!!
First of all, install the driver by installing HiSuite.
Second, make sure the USB cable is connected to the PC when you try to enter fastboot (rescue) mode. If the rescue mode is not there, then the last option is to try and force the update with 3 button method, but you must have a SD card for that.
Milan-XDA said:
First of all, install the driver by installing HiSuite.
Second, make sure the USB cable is connected to the PC when you try to enter fastboot (rescue) mode. If the rescue mode is not there, then the last option is to try and force the update with 3 button method, but you must have a SD card for that.
Click to expand...
Click to collapse
Hi Milan-XDA, Could you say how we should do?
wekii said:
I had the same situation. Just follow procedure that I was recently described here.
Good luck and keep us informed about your progress of getting phone back to life.
Click to expand...
Click to collapse
i have the same issue unfortunately boot failed and press the voilume down button for 6 sec if i do that it is fast boot but locked and when i try to flash boot img and recovery the system does not detect my p7
lovenix93 said:
"Unfortunately boot failed, get more information..." Message, when I try to enter in
Hi everyone, just boutht this phone preowned. It works well, but i dont know if the ex-owner modded it bad.
Everytime i try to enter the phone in recovery mode (pressing vol-,vol+ and power) led starts blinking green and red colour, and a screen like this, appear to me: View attachment 2974197
I press volume down button to enter in rescue mode, and I get a new screen, it says: PHONE LOCKED (in a green color. Now what does it mean? Bootloader is still locked? Or the phone has problems?) and I cant to connect phone in rescue mode from hisuite.
I have the same problem (the screen I attached, appear to me) not only when i want to go into recovery mode, but also when I charge my phone when it s power off( when i charge it not in power on) or if i want to flash an update.app from local update menu.
What could i do? Im in trouble. Thanks
Click to expand...
Click to collapse
can you help me out i am also stuck in this situation and whem i try to connect pc adb its did not recognize by pc

[FIX] Fastboot & Rescue Mode Loop/ Locked Bootloader

Meow! Meow!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am CATGEEK, a typical 24-year-old techie-fashionista girl from the Philippines and was a P7 user till yesterday (sold it already). I have been busy lately job hunting why I wasn't able to make this post. I know this is a bit late but I am pretty sure this'll help a lot. How I was able to get a solution was because I too experienced this and I couldn't really trust the service center since I've read some posts somewhere that also had the same problem-- it couldn't be repaired. So my habit whenever I brick my phone is not sleep until I find a fix. I was in the brink of being hopeless and tried to lend money from friends to buy a new phone and just sell the P7 at a lower price since it's declared defective. But I've come to a thread here that I will be sharing with you (it is inside my zip file) and my software repair skills when it comes to android phones that will help you out with this quite complicated issue. It's actually easy but of course you need to go through the process first before concluding that I am right (still to some people, this'll really gonna take their brains out ha ha! like how I did before). So let's get started!
Pre-reqs:
1.Enable USB Debugging but how?
Go to Settings>About phone>Tap "Build number" 5 times then go back to Settings>Developer options>Enable USB Debugging
2.Booting to fastboot but how?
Hold volume down and power button simultaneously until you see a white screen with android logo and "Fastboot & Rescue Mode" here you will also see whether your phone's bootloader is locked or unlocked, so since your prob here is it is locked, we will unlock it, okay?
3.INTACT BRAINS, SO IT WON'T GET OUT WHEN YOU ARE HAVING A HARD TIME
4.BELIEVE IN YOURSELF, HAVE CONFIDENCE!
Note:
Everything is in my zip file. Just click this mediafire link, install necessary files, read manuals and start working on it!
Proper Credits to:
Wekii from XDA Forums
A simple thanks is highly appreciated
​
my huawei is G615-u10 how can i solve fastboot and rescue mode
Would this still require getting the unlock code through Huawei?
Sent from my Nexus 6 using Tapatalk
I cant get to the system, recovery, the force update method wont work and the bootloader is locked. What can I do? I sent a message to huawei asking for the code, but it takes probably weeks to get it(if I should get it). I cant get it on the offical page, I keep getting an error saying 'The Huawei ID used to apply for the unlock code has not been used on the device for more than 14 days.'. Please help!
I followed the steps to fastboot reboot. Now my phone is stuck at the HUAWEI boot logo? Any ideas? I used an official bootloader unlock code from HUAWEI. I know this is an older post, but I'm hoping someone will see this, and be able to help.
HELP!!
My Ascend P7 L07 is bricked! While trying to boot system and recovery i got 3 green leds and 2 red leds and "Boot error" screen appears and fastboot is unnable to flash stock recovery/system/boot img files (Error Command not Allowed), anyone can help me?
I am also having this same problem....I can't get to recovery and I am stuck at FASTBOOT AND RESCUE mode......and USB debugging was disabled ....I can't turn on USB debugging cause my phone can't boot up.......I got this problem while flashing a TWRP recovery ........I ALSO TRIED FORCE UPDATING ANDROID (by downloading stock ROM to SD card and then pressing : vol up+vol down+ power)
Guys......I found the solution..... All u have to do is to download stock ROM of ur huawei device and force update it.....
Step 1: download stock ROM for ur device
Step2: move the ROM to ur SD card in a folder....and rename the folder as " dload"
Step 3: remove battery and press vol up + vol down+ power ......and after 10 sec release the both vol buttons ( DON'T RELEASE POWER BUTTON) afters some time , ur phone should boot into force update
I can confirm that this method worked on my Huawei Y550-L01 that was stuck in Fastboot&Rescue mode.
Thank you!
Peter pan7034779691 said:
Guys......I found the solution..... All u have to do is to download stock ROM of ur huawei device and force update it.....
Step 1: download stock ROM for ur device
Step2: move the ROM to ur SD card in a folder....and rename the folder as " dload"
Step 3: remove battery and press vol up + vol down+ power ......and after 10 sec release the both vol buttons ( DON'T RELEASE POWER BUTTON) afters some time , ur phone should boot into force update
Click to expand...
Click to collapse

Sony Xperia Z3C without /system, /boot partition, doesn't boot even in recovery mod!!

Please help, I Need your help!!!!!!!
I made a sh*t thing, I went to recovery mod (phil'z touch), I deleted /system, /boot and then I clicked on reboot recovery and guess what, the phone doesn't let go either in recovery nor bootloader mode!!! I don't know what to do, the phone is not either recognized by the pc!!!!!!!
Please I really don't know how to proceed further!!!
put it in flash mode and flash a new ftf with flashtool...
daha2002 said:
put it in flash mode and flash a new ftf with flashtool...
Click to expand...
Click to collapse
how do I put it in flash mode!? sorry but I'm really confused because it boots, but it stays stuck on "sony" screen!!!
With phone off, press volume down and connect usb cable connected to pc (drivers should be previously installed), when the led change color, release volume button. Done, you're in flash mode, now just flash tft (do it fast before your battery runs out)
daha2002 said:
With phone off, press volume down and connect usb cable connected to pc (drivers should be previously installed), when the led change color, release volume button. Done, you're in flash mode, now just flash tft (do it fast before your battery runs out)
Click to expand...
Click to collapse
Hi, I succedeed in connecting the device in fastboot mode but flashtool has opened a popup that never dismiss... I attach a screenshot, and in the meanwhile I'm downloading latest version of flashtool program..
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your phone has fastboot and FLASH modes.
Put it in FLASH mode (volume down) and the hit the lighting icon and flash a new firmware.
Don't worry, Sony phones are (almost) unbrickeable, just don't run out of battery.
daha2002 said:
Your phone has fastboot and FLASH modes.
Put it in FLASH mode (volume down) and the hit the lighting icon and flash a new firmware.
Don't worry, Sony phones are (almost) unbrickeable, just don't run out of battery.
Click to expand...
Click to collapse
So, first attempt was unsuccessfully because I tried to NOT wipe the user's /data and I got a bootloop in the end.. I'm newly trying to flash the firmware with all the wipes ticked... I'll let you know, thanks in advance for your support
edit: the phone booted up this time, and now it works!!

Z3 compact destroyed after root/unroor trial?!

Hi guys,
I need your help!
I have had a rooted Z3compact and i wanted it to unroot. But I did a mistake and now it looks like that the phone is dead.
What I did:
1. I wanted to unroot my phone. So I restarted it to enter the recovery menu. (pushing power button and loudspeaker buttons). Because of the fact that I rooted my phone the TWRP Menu appeared.
2. I entered the "Wipe-Menu" and selected all:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I dont want to select system, but I already pushed the button
I thought I can anyway at least enter the TWRP, but no!
When I now start the phone just the Sony Logo appears and that's all.
I already tried:
a. PC Companion -> Phone not detecting
b. Flash Tool -> Detects the phone but shows " This phone is locked"
-> This why the question to all of you. Is there a possibility to fix this?
THANK YOU!!!
Try using Emma
https://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/
Hello as I wrote before I already tried "Emma or Flashtool" and unfortunately It appears "This phone is locked"
So I don't know what eslse I can do because I am not an expert.
I would appriciate if someone have some other ideas or hinds.
Thanks
sogblade said:
Hello as I wrote before I already tried "Emma or Flashtool" and unfortunately It appears "This phone is locked"
So I don't know what eslse I can do because I am not an expert.
I would appriciate if someone have some other ideas or hinds.
Thanks
Click to expand...
Click to collapse
Well, there is actually 2 completely unrelated tools that is both using the name flashtool.
In this case the unofficial Flashtool is what you should try as it can work on a phone with a locked bootloader as well.
So download this and try to flash a stock rom (make sure you select one that is compatible with your mode [l/B])
Flashtool can automatically grab the firmware and download it for you.
Please let me know if this works for you
http://www.flashtool.net/index.php
So what you did is,since you have a locked bootloader,the recovery is actually located in the system partition,so then when you wiped it you removed recovery as well.
As @-Zteam- said try using the unofficial Flashtool and you should be good.
Hi Zteam thank you for this tip.
I installed the tool.
I connected the phone (I just connected the USB cable) and the tool shows "Device connected in flash mode".
When I do nothing after a while the phone starts (Sony Logo on display) and the tool shows "Device disconnected".
Can you give me a short instruction which steps I have to do?!
This would be perfect.
Thanks alot!
sogblade said:
Hi Zteam thank you for this tip.
I installed the tool.
I connected the phone (I just connected the USB cable) and the tool shows "Device connected in flash mode".
When I do nothing after a while the phone starts (Sony Logo on display) and the tool shows "Device disconnected".
Can you give me a short instruction which steps I have to do?!
This would be perfect.
Thanks alot!
Click to expand...
Click to collapse
You want to select the ftf file you're going to flash, and then choose flash. It takes a while to become ready, perhaps its unpacking the file to be flashed (don't know why but it takes a fair bit of time). The phone will reboot during this wait as you've experienced. You can hold down the power button and the volume up button together for a number of seconds to power it off, unplug the cable, then replug it in flashmode again, or from memory you can just wait until the file is ready to be flashed, then plug the phone in flashmode in which case it isn't going to reboot because its powered off and disconnected.
One of those things will work, either not plugging it in until it tells you it needs to, after choosing to flash the ftf, or by forcing it off and back on in flashmode using the power button and volume button.
Hi,
the phone works again! Thanks to all!
For all who have the same problem
I really can recommend this tool. It is very easy to handle.

Question Bricked My Redmi note 10 5g Device

Hello guys..
I have a Redmi note 10 5g global and was trying to fastboot flash Indonesian ROM using Mi Flash Tool ,it started well and stopped due Preloaded error, I tried again but it persisted so I unplugged my device and tried powering it up but it wont power on,won't show charging but only makes sound when Connected to PC,I tried alot of things to fix the Preloaded but with no success.
I badly need help To fix this problem guys..
dannykuma said:
Hello guys..
I have a Redmi note 10 5g global and was trying to fastboot flash Indonesian ROM using Mi Flash Tool ,it started well and stopped due Preloaded error, I tried again but it persisted so I unplugged my device and tried powering it up but it wont power on,won't show charging but only makes sound when Connected to PC,I tried alot of things to fix the Preloaded but with no success.
I badly need help To fix this problem guys..
Click to expand...
Click to collapse
try booting into fastboot, if not, boot into brom and flash stock miui via sp tool
open up device manager to make sure everything is right.
boot into brom by holding VOL-, VOL+ and POWER, at the same time connect the phone to ur pc. if it does the connected sound, check on device manager if the driver is missing. it should have a warning sign, if it does then install the drivers i annexed below the post (ive used them and it worked, up to u)
after installing them, by the meantime ur phone probably has restarted, so reboot it into brom once again and check devices manager. if it worked it should look something like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
with sp tool ready to flash. but first you might need to auth bypass because of MIUI account.
1lopes said:
try booting into fastboot, if not, boot into brom and flash stock miui via sp tool
open up device manager to make sure everything is right.
boot into brom by holding VOL-, VOL+ and POWER, at the same time connect the phone to ur pc. if it does the connected sound, check on device manager if the driver is missing. it should have a warning sign, if it does then install the drivers i annexed below the post (ive used them and it worked, up to u)
after installing them, by the meantime ur phone probably has restarted, so reboot it into brom once again and check devices manager. if it worked it should look something like this:
View attachment 5733123
with sp tool ready to flash. but first you might need to auth bypass because of MIUI account.
Click to expand...
Click to collapse
Thank you very much for the help....
Let me try
indonesian rom is fully compatible. sure u made something bad.
your bootloader is unlocked???? u have downloaded fastboot version? clean flash selected? write al steps u did with precision. i'm 100% sure is not a compatibility problem. i have installed indonesian rom more then one time without any problems
IF U CAN ENTER INTO FASTBOOT, U CAN RESTORE YOUR PHONE WITHOUT PROBLEMS. stay away from advanced procedures like restore preloader. First try the easyest solutions. If didnt work i suggest mtkclient under arch linux for reflash boot vbeta and preloader. But follow my tip: enter into fastboot and reflash stock using adbdastboot tool. Is the easyest solution

Categories

Resources