Hello, my brother has this mobile and when he tries to use the NFC a warning appears "read error try again later", is there any solution without factory reset?, thanks.
joseac said:
Hello, my brother has this mobile and when he tries to use the NFC a warning appears "read error try again later", is there any solution without factory reset?, thanks.
Click to expand...
Click to collapse
Are you using MIUI or Custom ROM, If MIUI are you using Custom kernel for it?
MIUI, without any modification.
Are you totally sure your Redmi note 9 has NFC? Some versions don't
Whether or not, you can test it by doing the following (you'll need an NFC tag or NFC equipped bank card etc)
Settings > About Phone > All Specs > tap Kernel Version four times
This opens up CIT
model number M2003J15SG item 31 in CIT is NFC Test
Tap that and follow the instructions
If your phone doesn't register the tag either:
a) your phone doesn't have NFC (likely if this were the case, CIT wouldn't have given you the option to test it though)
b) your tag isn't working
c) your phone's NFC isn't working
For info, I just turned my NFC off and tested that the phone doesn't recognize an NFC tag. Opened CIT and tested it and it recognized the tag - so it seems CIT will test the hardware, even if software is disabling it
If it still won't work, post back with your model number and I'll check if it is supposed to have NFC
Edgars Cīrulis said:
¿Estás completamente seguro de que tu Redmi note 9 tiene NFC? Algunas versiones no
Independientemente de si puede probarlo haciendo lo siguiente (necesitará una etiqueta NFC o una tarjeta bancaria equipada con NFC, etc.)
Configuración> Acerca del teléfono> Todas las especificaciones> toque Versión del kernel cuatro veces
Esto abre CIT
número de modelo M2003J15SG artículo 31 en CIT es prueba NFC
Toca eso y sigue las instrucciones.
Si su teléfono tampoco registra la etiqueta:
a) su teléfono no tiene NFC (probablemente si este fuera el caso, CIT no le habría dado la opción de probarlo)
b) tu etiqueta no funciona
c) la NFC de su teléfono no funciona
Para obtener información, acabo de apagar mi NFC y probé que el teléfono no reconoce una etiqueta NFC. Abrió CIT y lo probó y reconoció la etiqueta, por lo que parece que CIT probará el hardware, incluso si el software lo está deshabilitando
Si aún no funciona, publíquelo con su número de modelo y verificaré si se supone que tiene NFC
Click to expand...
Click to collapse
In the CIT test the warning "read error" appears-..........We are trying with another phone with NFC to pass a photo, in the payment terminals it does nothing.
joseac said:
In the CIT test the warning "read error" appears-..........We are trying with another phone with NFC to pass a photo, in the payment terminals it does nothing.
Click to expand...
Click to collapse
Maybe the terminal is damaged?
Edgars Cīrulis said:
Maybe the terminal is damaged?
Click to expand...
Click to collapse
No, I don't have any hits..., I'll see if we can try in safe mode....
joseac said:
No, I don't have any hits..., I'll see if we can try in safe mode....
Click to expand...
Click to collapse
Try checking on any market with termianls if it works then the other one is damanged. that why can't read.
Related
En castellano en el 2do post.
After an arduous search , I managed how to unlock the bootloader my smart phone.
The problem: In Latin America the cellular band we use is 850Mhz/1900Mhz while the rest of the world uses 900Mhz/1800Mhz . If a European rom is installed in our smartphones these will fail because they can not connect to the network.
So it was not possible to unlock our bootloader because none JB version existed for Latin America in the official list of LG and we could not install a version of another region.
Solution: After much searching I read somewhere, I honestly do not remember where, that a mexican said that he had just bought a P880 and this came with JB . Then I began to search for this rom, after a couple of hours I managed to find it at a chinese download page. It was a painful download 50Kb/s (I have a 10mb internet speed) , I tried it and IT WORKED !
Too many words , this is how I did it:
- The original instructions to install it I read it from here: http://forum.xda-developers.com/showthread.php?t=1861942
- I do NOT responsible for any problems or inconvenience you may have with your smartphone by following this procedure.
1. Download from here dz . https://mega.co.nz/#!vN0FUDrK!5yr12FCdFAQGNfs4T5CxtBB1p3DMUQQG6qWV7HtGKn0 ( 571Mb )
2. Download drivers: https://mega.co.nz/#!3ckwVZQQ!wGvu5uKH5lZpalYUSEaIr_4-54N_8q-bfLU-_cEkM3E
3. Download OmapFlashInstaller: https://mega.co.nz/#!SB9QnRAL!FIrimclzdqUpQzXZoQqKkhBDdDEp0DDdmUwHmZO1Xls
4. Download LGFlashTool : http://www.mediafire.com/?pzqr0gsw8u9erxl
5. Install in this order:
a) LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe
b ) LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe
c ) OMAPFlashInstaller.msi
d ) LGFlashTool
6. Turn off the phone and remove the sim card and sd card
7. Press and hold the Volume Down button and connect the USB cable
8. Wait for Windows to install the drivers . Right click on My Computer > Manage > Device Manager , look for LGE CDMA USB SERIAL PORT right click > Properties> Com port and change it to 41
9. Run as administrator LGFlashTool
10. Select the dll that was in LG 880AT V20c folder
11. In S / W select the. Dz
12. Check the USB option and OK
13 . Click on the COM port settings , select 1 ( uncheck all others)
14 . Click start and port 1 should read: READY
15 . Disconnect the USB cable and turn off the computer
16 . Wait 5 seconds
17 . Press the Volume Down button and connect the usb cable to your smartphone
18 . When you start to upgrade you can release the button volume
19 . When the computer restarts finished and ready
Unlock bootloader :
They can test for this post : http://forum.xda-developers.com/showthread.php?t=2224020
To me it was using my BL_unlock.zip Photo
Internet doesnt work? You need to find on internet the right APN configuration and configure your phones.
Any questions comment me .
Greetings and God bless.
Español
Despúes de una ardua busqueda logré liberar el bootloader mi celular inteligente.
El problema: En Latinoamerica se usa la banda celular 850Mhz/1900Mhz mientras que el resto del mundo usa 900Mhz/1800Mhz. Si instalamos una rom europea en nuestros smartphones estos fallaran porque no pueden conectarse.
Por eso no era posible desbloquear nuestros bootloader pues no existia una version JB para latinoamerica y no podiamos instalar una versión de otra región.
Solución: Despues de mucho buscar lei en alguna parte, sinceramente no recuerdo donde, que un Mexicano decia que acababa de comprar un P880 y que este vino con JB. Empecé entonces con la busqueda de esta rom, luego de un par de horas logré encontrarlo en una página de descargas china. Fue una penosa descarga a 50Kb/s pero al fin terminó, lo probé y FUNCIONÓ!!!
Muchas palabras, asi es como lo hice:
- Las instrucciones originales para instalarlo lo leí de aca: http://forum.xda-developers.com/showthread.php?t=1861942
- NO me hagan responsable por los problemas o inconveniente que tengan con su equipo al seguir este procedimiento.
1. Descargar el .dz desde aca: https://mega.co.nz/#!vN0FUDrK!5yr12FCdFAQGNfs4T5CxtBB1p3DMUQQG6qWV7HtGKn0 (571Mb)
2. Descagar los drivers: https://mega.co.nz/#!3ckwVZQQ!wGvu5uKH5lZpalYUSEaIr_4-54N_8q-bfLU-_cEkM3E
3. Descargar OmapFlashInstaller: https://mega.co.nz/#!SB9QnRAL!FIrimclzdqUpQzXZoQqKkhBDdDEp0DDdmUwHmZO1Xls
4. Descagar LG FlashTool: http://www.mediafire.com/?pzqr0gsw8u9erxl
5. Instalar en este orden:
a) LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe
b) LGUnitedMobileDriver_S497MA20_WHQL_ML_Ver_1.0.exe
c) OMAPFlashInstaller.msi
d) LGFlashTool
6. Apagar el teléfono y retirar la tarjeta sim y la tarjeta sd
7. Mantener presionado el boton de volumen abajo y conectar el cable USB
8. Esperar que Windows instale los drivers. Dale click derecho a Mi PC > Administrar > Administrador de dispositivos, buscar LGE CDMA USB SERIAL PORT click derecho > Propiedades > Com port y cambiarlo a 41
9. Ejecuta LGFlashTool como administrador
10. Selecciona el dll que estaba dentro de la carpta de la primera descarga
11. En S/W selecciona el archivo .dz
12. Marca la opción USB y OK
13. Click en la configuración de puerto COM y selecciona 1 (desmarca los demas)
14. Click start y el puerto 1 debería decir: READY
15. Desconecta el cable USB y apaga el equipo
16. Espera 5 segundos
17. Presiona el boton de volumen abajo y conecta el cable usb al smartphone
18. Cuando empiece a actualizar puedes soltar el boton de volumen
19. Cuando termine el equipo se reiniciará y listo
Desbloquear bootloader:
Pueden probar las de este post: http://forum.xda-developers.com/showthread.php?t=2224020
A mi me resultó usando el archivo BL_unlock.zip
Cualquier duda me comentan.
Saludos y que Dios los bendiga.
OmapFlashInstaller? I'm sure that's not needed.
Sent from my OmniROM-powered LG Optimus 4X HD
Help please
Hi, when i try to install the LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe, gives me error
Says version 3.08.001 is allready installed and this is an older version. so, in order to install this first i have to unnistall my curent version.
Any idea what should i do?
Monchito007 said:
Hi, when i try to install the LGUnitedMobileDriver_S497CA20_WHQL_ML_Ver_1.0.exe, gives me error
Says version 3.08.001 is allready installed and this is an older version. so, in order to install this first i have to unnistall my curent version.
Any idea what should i do?
Click to expand...
Click to collapse
If you already have the proper drivers installed you don't need to reinstall them. Probably they are installed by LG Tool, they should be working.
Sent from my LG-P880 using XDA Premium 4 mobile app
My Optimus 4X is from Claro - Perú, a latin american version, and I just flashed the first leaked V20A when it came out to be able to unlock the bootloader with laufersteppenwolf's procedure.
A friend of mine also told me he manually modified /sys/firmware/fuse/odm_reserved to 40000000c0 and it worked (using info taken from this thread: http://forum.xda-developers.com/showthread.php?t=2251407), but Idk if it is an adequate solution.
mario.gacv said:
My Optimus 4X is from Claro - Perú, a latin american version, and I just flashed the first leaked V20A when it came out to be able to unlock the bootloader with laufersteppenwolf's procedure.
A friend of mine also told me he manually modified /sys/firmware/fuse/odm_reserved to 40000000c0 and it worked (using info taken from this thread: http://forum.xda-developers.com/showthread.php?t=2251407), but Idk if it is an adequate solution.
Click to expand...
Click to collapse
Hi, I'm from Perú too.. and my phone company is Claro. :highfive:
I unlocked my bootloader using the file attached on this post: http://forum.xda-developers.com/showthread.php?t=2224020. BL-unlock_new.rar
After that I install Clockworkmod Touch Recovery and now I have Cyanogenmod 10.1.3
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Hola, soy de Perú también.. y mi compañía también es Claro. :highfive:
Desbloqueé mi bootloader usando el archivo adjunto en este post: http://forum.xda-developers.com/showthread.php?t=2224020. BL-unlock_new.rar
Después de eso instalé Clockworkmod Touch Recovery y ahora tengo Cyanogenmod 10.1.3
good job working that out, should be in the tutorials post
QHSUSB_DLOAD(Now "Qualcomm HS-USB QDLoader 9008") - Motorola Iron Rock [XT626] !
I dont know if this is on the correct place, maybe not, if its not in correct, im sorry, im newbie around here/ No se si esto está en el lugar correcto, tal vez no, si no lo está, me disculpo, soy nuevo por acá.
Good morning everyone...
A couple of days ago I was asked to check an XT626 to see what it has, the only information they gave me is that the phone worked correctly except for an exaggerated slowness and constant reboots until, in one of these, it stopped working and When was turned on, it only showed the message "fastboot mode" in the upper part of the screen, with the rest of the screen completely black. When i take it, I wanted to see that error by myself, but didn't get any proof of life from the phone, when connected it to my PC in the hope that it would at least charge, I saw that it was detected as "QHSUSB_DLOAD", this sounded bad for me and start searching, then I discovered that it is possibly a HardBrick, the curious thing is that the phone was not exposed to any kind of "tinkering", in fact, with luck it was used to communicate between the owner And his partner.
Now, after spending an entire night searching about this problem, i get the drivers to make it get detected as "Qualcomm HS-USB QDLoader 9008(COMxx)", also i get stock firmware with .HEX and .MBN files, and QPST.
Now ... Is it correct to say that this problem is due to a Hardbrick? Is there a way to solve it without having to spend money in technical service? What could be the causes of this problem in a phone that was practically on factory status?
Thanks in advance.
Buenas a todos...
Hace un par de días me pidieron revisar un XT626 para "ver que tiene", la única información que me dieron es que el terminal funcionaba correctamente a excepción de una lentitud exagerada y constantes reinicios hasta que, en uno de estos, dejo de funcionar y al encenderlo solo mostraba en la parte superior de la pantalla el mensaje "fastboot mode" con el resto de la pantalla completamente en negro. Cuando me lo dieron, quise ver de primera mano dicho mensaje, pero no conseguí que el terminal diera ninguna señal de vida, al conectarlo a mi PC con la esperanza de que al menos cargue, me di cuenta que lo detectaba estando apagado pero bajo el nombre de "QHSUSB_DLOAD", esto me sonaba mal y buscando descubrí que posiblemente se trata de un brickeo, lo curioso es que dicho terminal no fue expuesto a ningún tipo de "manoseo", de hecho, con suerte era utilizado para comunicarse entre el dueño y su pareja.
Ahora bien... Es correcto decir que dicho problema se debe a un brickeo? Hay actualmente forma de solucionarlo sin tener que invertir dinero en servicio técnico? Cuales podrían ser las causas de este problema en un terminal que se encontraba prácticamente en su estado de fabrica?
Desde ya muchas gracias!
~Alexel
AlexelPk said:
I dont know if this is on the correct place, maybe not, if its not in correct, im sorry, im newbie around here/ No se si esto está en el lugar correcto, tal vez no, si no lo está, me disculpo, soy nuevo por acá.
Good morning everyone...
A couple of days ago I was asked to check an XT626 to see what it has, the only information they gave me is that the phone worked correctly except for an exaggerated slowness and constant reboots until, in one of these, it stopped working and When was turned on, it only showed the message "fastboot mode" in the upper part of the screen, with the rest of the screen completely black. When i take it, I wanted to see that error by myself, but didn't get any proof of life from the phone, when connected it to my PC in the hope that it would at least charge, I saw that it was detected as "QHSUSB_DLOAD", this sounded bad for me and start searching, then I discovered that it is possibly a HardBrick, the curious thing is that the phone was not exposed to any kind of "tinkering", in fact, with luck it was used to communicate between the owner And his partner.
Now, after spending an entire night searching about this problem, i get the drivers to make it get detected as "Qualcomm HS-USB QDLoader 9008(COMxx)", also i get stock firmware with .HEX and .MBN files, and QPST.
Now ... Is it correct to say that this problem is due to a Hardbrick? Is there a way to solve it without having to spend money in technical service? What could be the causes of this problem in a phone that was practically on factory status?
Thanks in advance.
Buenas a todos...
Hace un par de días me pidieron revisar un XT626 para "ver que tiene", la única información que me dieron es que el terminal funcionaba correctamente a excepción de una lentitud exagerada y constantes reinicios hasta que, en uno de estos, dejo de funcionar y al encenderlo solo mostraba en la parte superior de la pantalla el mensaje "fastboot mode" con el resto de la pantalla completamente en negro. Cuando me lo dieron, quise ver de primera mano dicho mensaje, pero no conseguí que el terminal diera ninguna señal de vida, al conectarlo a mi PC con la esperanza de que al menos cargue, me di cuenta que lo detectaba estando apagado pero bajo el nombre de "QHSUSB_DLOAD", esto me sonaba mal y buscando descubrí que posiblemente se trata de un brickeo, lo curioso es que dicho terminal no fue expuesto a ningún tipo de "manoseo", de hecho, con suerte era utilizado para comunicarse entre el dueño y su pareja.
Ahora bien... Es correcto decir que dicho problema se debe a un brickeo? Hay actualmente forma de solucionarlo sin tener que invertir dinero en servicio técnico? Cuales podrían ser las causas de este problema en un terminal que se encontraba prácticamente en su estado de fabrica?
Desde ya muchas gracias!
~Alexel
Click to expand...
Click to collapse
There can be many causes for the device to have these kinds of issues. It could be that the software or hardware got corrupted due to some kind of degradation, possibly faulty battery, being dropped, getting wet, overheating, etc..
If you've been reading this thread then you have the correct method to restore the device, now you just need to make sure that you have the correct compatible files for your model number to be flashed at the various flashing steps in these instructions. Flashing the wrong bootloader or any other partitions can be disastrous so make absolutely certain that what you flash at any time is compatible with your model number. You may have to adapt these instructions for your specific model, post in that thread or read all the way through it to see the various other tricks involved if it doesn't work the first time, you might find enough information to understand exactly which files you need and where to get them.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hola amigos. Soy de Uruguay. En enero de 2018 compré el note 8 N950f en una tienda oficial de Samsung. Resulta que tengo problemas con la red Lte. Por ejemplo cuando envío mensajes de whatsapp el móvil en ocasiones tarda de 3 a 10 segundos en enviar. A veces envía instantáneamente pero a veces no. He probado en otras ciudad y me sucede lo mismo muchas veces. También al cargar Facebook las imágenes tengo pila de retraso. Al abrir una búsqueda de Google tarda bastante en cargar. Pero no es siempre. Averigüe con mi compañía Antel de cobertura de datos y según ellos la señal anda bien. Antes en mi S7 edge nunca tuve problema. Ahora fui al centro de Samsung donde compré el móvil y le hicieron una prueba de diagnóstico y aparentemente no tiene fallos. Me ofrecieron cambiar la placa pero me da miedo porque puede quedar mal y no quiero otros problemas. Me decían que utilizan los pegamento y partes originales pero no quiero de momento abrir el dispositivo. Antes de ayer cambié el nano sim para descartar que fuese eso pero el problema persiste. Ahora me ofrecieron de la compañía de datos prestarme un celular y probar el sim. En caso de que en otro dispositivo la señal funcione bien debería cambiar la placa de mi móvil. No me queda otra alternativa. De todas maneras voy a pelear para que me den un dispositivo nuevo de caja. Ya reinicie de fábrica hoy el dispositivo y no tuve mejora al respecto. Que hago? Saludos y gracias amigos.
mod edit:
Hello friends. I'm from Uruguay. In January 2018 I bought the note 8 N950f at an official Samsung store. It turns out that I have problems with the Lte network. For example when I send messages from WhatsApp the mobile phone sometimes takes 3 to 10 seconds to send. Sometimes it sends instantly but sometimes it does not. I have tried in other cities and the same thing happens to me many times. Also when loading Facebook the images I have a delay stack. When opening a Google search it takes a long time to load. But it is not always. Find out with my company Antel data coverage and according to them the signal is good. Before in my S7 edge I never had a problem. Now I went to the Samsung center where I bought the phone and did a diagnostic test and apparently has no failures. They offered to change the plate but I'm scared because it can go wrong and I do not want other problems. They told me that they use the glue and original parts but I do not want to open the device at the moment. Before yesterday I changed the nano sim to rule out that but the problem persists. Now I was offered by the data company to lend me a cell phone and try the sim. If the signal works correctly on another device, I should change the nameplate on my mobile phone. I have no other alternative. Anyway, I'm going to fight to get a new box device. I already reboot the device from the factory today and I did not have improvement in that regard. What I do? Greetings and thank you friends.
I think your thread should have been started in the questions and answers section, and as as a general rule, in english, luck
Hello friends. I'm from Uruguay. In January 2018 I bought the note 8 N950f at an official Samsung store. It turns out that I have problems with the Lte network. For example when I send messages from WhatsApp the mobile phone sometimes takes 3 to 10 seconds to send. Sometimes it sends instantly but sometimes it does not. I have tried in other cities and the same thing happens to me many times. Also when loading Facebook the images I have a delay stack. When opening a Google search it takes a long time to load. But it is not always. Find out with my company Antel data coverage and according to them the signal is good. Before in my S7 edge I never had a problem. Now I went to the Samsung center where I bought the phone and did a diagnostic test and apparently has no failures. They offered to change the plate but I'm scared because it can go wrong and I do not want other problems. They told me that they use the glue and original parts but I do not want to open the device at the moment. Before yesterday I changed the nano sim to rule out that but the problem persists. Now I was offered by the data company to lend me a cell phone and try the sim. If the signal works correctly on another device, I should change the nameplate of my mobile phone. I have no other alternative. Anyway, I'm going to fight to get a new box device. I already reboot the device from the factory today and I did not have improvement in that regard. What I do? Greetings and thank you friends.
Verifica si no gastate la data de tu plan, aveces la PlayStore actualiza las apps automaticamente y te consumen la data.
Does your note 8 drop 4G/ LTE signal when these issues occur?
Sent from my SM-N950U using Tapatalk
xxiForza said:
Verifica si no gastate la data de tu plan, aveces la PlayStore actualiza las apps automaticamente y te consumen la data.
Click to expand...
Click to collapse
English too please
xxiForza said:
Verifica si no gastate la data de tu plan, aveces la PlayStore actualiza las apps automaticamente y te consumen la data.
Click to expand...
Click to collapse
Thanks friend but always review, I have enough megs to navigate.
Limeybastard said:
Does your note 8 drop 4G/ LTE signal when these issues occur?
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
I usually have 2 to 4 signal lines. It does not go down too much.
lato15 said:
Hola amigos. Soy de Uruguay. En enero de 2018 compré el note 8 N950f en una tienda oficial de Samsung. Resulta que tengo problemas con la red Lte. Por ejemplo cuando envío mensajes de whatsapp el móvil en ocasiones tarda de 3 a 10 segundos en enviar. A veces envía instantáneamente pero a veces no. He probado en otras ciudad y me sucede lo mismo muchas veces. También al cargar Facebook las imágenes tengo pila de retraso. Al abrir una búsqueda de Google tarda bastante en cargar. Pero no es siempre. Averigüe con mi compañía Antel de cobertura de datos y según ellos la señal anda bien. Antes en mi S7 edge nunca tuve problema. Ahora fui al centro de Samsung donde compré el móvil y le hicieron una prueba de diagnóstico y aparentemente no tiene fallos. Me ofrecieron cambiar la placa pero me da miedo porque puede quedar mal y no quiero otros problemas. Me decían que utilizan los pegamento y partes originales pero no quiero de momento abrir el dispositivo. Antes de ayer cambié el nano sim para descartar que fuese eso pero el problema persiste. Ahora me ofrecieron de la compañía de datos prestarme un celular y probar el sim. En caso de que en otro dispositivo la señal funcione bien debería cambiar la placa de mi móvil. No me queda otra alternativa. De todas maneras voy a pelear para que me den un dispositivo nuevo de caja. Ya reinicie de fábrica hoy el dispositivo y no tuve mejora al respecto. Que hago? Saludos y gracias amigos.
mod edit:
Hello friends. I'm from Uruguay. In January 2018 I bought the note 8 N950f at an official Samsung store. It turns out that I have problems with the Lte network. For example when I send messages from WhatsApp the mobile phone sometimes takes 3 to 10 seconds to send. Sometimes it sends instantly but sometimes it does not. I have tried in other cities and the same thing happens to me many times. Also when loading Facebook the images I have a delay stack. When opening a Google search it takes a long time to load. But it is not always. Find out with my company Antel data coverage and according to them the signal is good. Before in my S7 edge I never had a problem. Now I went to the Samsung center where I bought the phone and did a diagnostic test and apparently has no failures. They offered to change the plate but I'm scared because it can go wrong and I do not want other problems. They told me that they use the glue and original parts but I do not want to open the device at the moment. Before yesterday I changed the nano sim to rule out that but the problem persists. Now I was offered by the data company to lend me a cell phone and try the sim. If the signal works correctly on another device, I should change the nameplate on my mobile phone. I have no other alternative. Anyway, I'm going to fight to get a new box device. I already reboot the device from the factory today and I did not have improvement in that regard. What I do? Greetings and thank you friends.
Click to expand...
Click to collapse
Friends, you know that I put my chip in a Samsung J5 that they lent me and the signal is very good, that means it is the NOTE. I think I should wait for Android 8 to see if the problem is solved, since I read that in some countries there are problems with the 4G LTE and with a security patch it was solved. If I install Android Oreo and the problem persists, I must take the device to Samsung to have it replaced. I have no other choice.
lato15 said:
Friends, you know that I put my chip in a Samsung J5 that they lent me and the signal is very good, that means it is the NOTE. I think I should wait for Android 8 to see if the problem is solved, since I read that in some countries there are problems with the 4G LTE and with a security patch it was solved. If I install Android Oreo and the problem persists, I must take the device to Samsung to have it replaced. I have no other choice.
Click to expand...
Click to collapse
My wife's note 8 would drop LTE sometimes when mine doesn't. When that occurred for her , her Facebook and stuff slowed down. Hence why I asked.
Sent from my SM-N950U using Tapatalk
Good Day All.
My friend bought a second hand Xperia XZ2, they informed him its simlocked, he bought it anyway, he was under the impression he can just bring it to me and I can flash it will work with any sim.
So he brought the phone to me and I checked the network status using *#*#7378423#*#*
According go my research the information I received from checking the Sim status is that the phone has been hard-locked, all attempts have been tried.
If there was attempts left I could have purchased an unlock code.
I did further research and found that there is a Tool that can unlock hard-locked devices, but Im going around in circles.
Further more, shouldn't Flashtools be able to solve this for me?
I flashed the phone with the latest Firmware wiping all the data, but the sim network just doesn't work.
Help would be appreciated
(Speak spanish) tengo el mismo problema todos los intentos se han utilizado, pensaba flashearlo pero según el problema sigue sucediendo, prueba cambiando IMEI con Xposed installer y me dices si te funcionó la red
Diegoxz2 said:
(Speak spanish) tengo el mismo problema todos los intentos se han utilizado, pensaba flashearlo pero según el problema sigue sucediendo, prueba cambiando IMEI con Xposed installer y me dices si te funcionó la red
Click to expand...
Click to collapse
Changing the IMEI number....uhmm interesting....
Thats an idea
Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
suarezfco said:
Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
Click to expand...
Click to collapse
Hola, I think first you must unlock your bootloader, and then, you can flash every rom that you like (always official MIUI from Mi) https://forum.xda-developers.com/t/firmware-redmi-note-10s-rosemary-auto-updated.4294971/
Authi said:
Hola, I think first you must unlock your bootloader, and then, you can flash every rom that you like (always official MIUI from Mi) https://forum.xda-developers.com/t/firmware-redmi-note-10s-rosemary-auto-updated.4294971/
Click to expand...
Click to collapse
Authi thanks for your reply
and for sharing your knowledge with others.
I used xiaomitools v2 changed the rom for me, but the logo still appears and did not enable the sim2.
I'm going to do what you tell me to unlock the bootloader and flash the rom to see if I can remove the logo and enable sim 2.
suarezfco said:
Hi guys, I need help with my Redmi Note 10 purchased in Claro Colombia. This version has the SIM 2 locked.
I want to change the rom to the global version to enable the sim2 and remove all junk apps, but I don't know what software to use.
I would be very grateful if you could help me.
Click to expand...
Click to collapse
Hi,
If you want to remove all the junk apps, then i would recommend using this tool
https://github.com/Szaki/XiaomiADBFastbootTools
Its a very simple and useful tool
All the instructions are given there as well.
For the list of bloatware, you can refer these websites:
https://rootmygalaxy.net/xiaomi-bloatware-list-remove-safely-from-miui/
https://selivan.github.io/2020/02/25/removing-bloatware-from-xiaomi-miui-android.html
https://technastic.com/xiaomi-bloatware-list-miui/
suarezfco said:
Authi thanks for your reply
and for sharing your knowledge with others.
I used xiaomitools v2 changed the rom for me, but the logo still appears and did not enable the sim2.
I'm going to do what you tell me to unlock the bootloader and flash the rom to see if I can remove the logo and enable sim 2.
Click to expand...
Click to collapse
@suarezfco para desbloquear el bootloader te recomiendo usar la herramienta MiFlashUnlock, recomendado al 100%, lo único con lo que podrías tener problemas son los drivers, comienza con este video:
me comentas como vas
dajohlopez said:
@suarezfco para desbloquear el bootloader te recomiendo usar la herramienta MiFlashUnlock, recomendado al 100%, lo único con lo que podrías tener problemas son los drivers, comienza con este video:
me comentas como vas
Click to expand...
Click to collapse
@dajohlopez saludos, gracias por responder, el bootloader lo realice como lo indicas con miflashunlock, pero para el proceso de cambio de rom fastboot utilicé xiaomitools v2 y me dio un error, ahora se queda pegado en el logo de redmi y de ahí no pasa
suarezfco said:
@dajohlopez saludos, gracias por responder, el bootloader lo realice como lo indicas con miflashunlock, pero para el proceso de cambio de rom fastboot utilicé xiaomitools v2 y me dio un error, ahora se queda pegado en el logo de redmi y de ahí no pasa
Click to expand...
Click to collapse
Hola, si te bajas una rom que sea compatible con fastboot, NO necesitas para nada ninguna aplicación adicional, ni xiaomitools ni nada. Descomprimes el archivo .tgz (con Winrar por ejemplo) en una carpeta lo mas cercana a la raiz de C:\ (yo uso C:\Temp) Acto seguido, allí dentro, encontrarás un archivo llamado "flash_all.bat". Simplemente, verifica que tu pc reconozca el móvil, si conseguiste desbloquear el bootloader, ya deberías reconocerlo sin problemas, entonces clica ese archivo, se abrirá una ventana de Ms-Dos, y con un poco de paciencia, deja trabajar el archivo por lotes, y en unos minutos, tendrás flaseado tu telf. sin problemas. No te deseperes, si pasa algún minuto sin que parezca que no avanza, déjalo trabajar, y si todo va bien, lo tendrás resuelto.
Saludos
--------------------------------------------------
Hello, if you download a ROM that is compatible with FastBoot, you do not need any additional application, or Xiaomitools or anything else. Unzip the .tgz file (with WinRAR for example) in a folder as close to the root of c: \ (I use c: \ temp) Then, there inside, you will find a file called "flash_all.bat". Simply, check that your PC recognizes the mobile, if you managed to unlock the bootloader, you should already recognize it without problems, then click on that file, an MS-DOS window will open, and with a little patience, let the batch file to work in a few minutes, you will be flaky of your tel. No problem. Do not desperate, if you spend some minute without it, it seems that it does not advance, let it work, and if everything goes well, you will have it resolved.
Greetings